Are there any long-term consequences for carrying a balance?

I have some upcoming dental work ($7k) and was planning to pay in interest-free installments to the office. However, I was just approved (hooray) for a Quicksilver card with 0% APR until March. I am considering putting the work on this card, because I would earn 1.5% ($105) and get 10% discount from the dentist for paying in full ($700!). It is not a problem to pay this off before March. I have no immediate credit needs so I can take the score hit for a few months on the higher util. Are there any long-term negatives to carrying a balance? Will Cap1 hold it against me in the future? I know they like to see you charge up the card and pay it off in full, not sure if this plan will bite me. (I would pay well above minimum each month.) Thanks for any advice.

While % util will go up, scoring of % util has no memory, and thus once paid off, it will not have contnued impact. A possible concern of a credtior is when a consumer maintains a high balance for a prolonged period, which can be viewed as an indication that the consumer is over-relying on credit, and thus might be a higher risk.Based on that, it could trigger a decrease in credit limit, thus resutling in little or no decrease in % util even though the account balance is being reduced. I would try to keep it below approx 80% of overall credit limit, and if above that number, get it down within a couple of months.

Similar Messages

  • Are there any WWI flying games for the mac?

    Are there any WWI flying games for the modern mac? (Computer)
    The only one's I can find are on line.
    Which isn't always an option when traveling.

    You might want to search in the App Store.
    Phil

  • Are there any mac screen savers for multiple screens

    Are there any mac screen savers for multiple screens? like the one in the swordfish movie with john travolta haha

    screensaver +, free from the apps store, will do two monitors.  It does not do three monitors . 

  • Are there any available vi's for PXI?

    Are there any VI's avaliable for PXI as it is for example VXI?
    Regards
    Henrik

    Hi Henrik,
    What kind of VI's do you need? PXI (PCI Extension for Instrumentation) is based on the PCI bus and you've usually a Windows PXI-Controller or a MXI-4 link (PCI-PCI-Bridge) which controls all boards in a PXI Chassis. There is no difference prgramming differnce between a LabVIEW VI which runs in a PC or in a PXI Controller. For example, it doesn't matter if you've a PCI-6025 DAQ board or a PXI-6025 board. The VI (programming) is the same. Of course, the PXI factor has more synchronisation and trigger capabilities then a PC based system, but there are no special VI's for that. The same DAQ driver handles both.
    I can give you a more detailed answer if you can give more informations. What do you want to do?
    Regards,
    Luca

  • Are there any free templates available for MUSE?

    Are there any free templates available for MUSE?

    Thank you for your help!
    Sent from my T-Mobile 4G LTE Device

  • Are there any graphic driver updates for Satellite L850-162

    Are there any driver updates available for the L850-162?
    I'm just running with the ones that came installed with the laptop but the display is pixellated and jumpy when watching video.
    Any help/advice would be much appreciated

    Sat L850-162 is a part of the PSKDGE and it has been equipped with an Intel HD (INTEL HM76) Express chipset (graphic chip)
    There are more Toshiba series which use the same chipset so you could also use the drivers released for such notebook models.
    For example:
    C850 PSKC8E
    C855 PSKC8E
    C870 PSC8EE
    L830 PSK84E
    L870 PSKBGE
    P850 PSPKBE
    and others
    At least you could also try to use the Intel HD HM76 driver from the Intel page.

  • Hi, are there any free replace program for iMac 27' 2011 mid?

    hi, are there any free replace program for iMac 2011 27' mid? I just read some news which said apple could provide a free replacement of graphics card for imac 2011 mid. becacue imac produced from 2011 to 2012 had some issued in graphic card. is it true?

    If it qualifies, see > iMac (27-inch): AMD Radeon 6970M Video Card Program

  • Are there any clustering deployment parameters for MDB ?

    Hi all,
              Are there any clustering deployment parameters for MDB ?
              We set the Default Load Algorithm to weight-based on the Administration
              Console,
              and three servers in the cluster have the folloing weights:
              Server1: 100
              Server2: 1
              Server3: 50
              Put 10000 messages to the queue which a MDB is listening. The three servers
              consume messages:
              Server1: 4154
              Server2: 3181
              Server3: 2665
              If we set th Algorithm to round-robin and put 10000 messages again, the
              result is:
              Server1: 3559
              Server2: 2696
              Server3: 3745
              It seems that the weight-based setting doesn't work.
              Except the settings on the Administration Console, are there any clustering
              deployment parameters for MDB to have different behaviors?
              TIA
              Alan.
              

    Thanks that was very helpful. My problem however wasn't with using Message driven beans or with sending/receiving messages to/from queue/topics from clients within the application ear file but from outside the ear file , like a remote client. When I follow the exact same steps for a remote client, except getting the context ofcourse, though I am able to lookup the queues and queue connection factories, I am not able to send messages to those queues. It's then that the client throws an exception that it couldn't connect to the JMS Server.
    The server throws the following exception:
    java.lang.NullPointerException
    at com.evermind.server.jms.JMSServer.removeClient(JMSServer.java:724)
    at com.evermind.server.jms.JMSRequestHandler.run(JMSRequestHandler.java:
    278)
    at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExec
    utor.java:796)
    at java.lang.Thread.run(Thread.java:484).
    The client throws the following exception:
    Exception in thread "main" javax.jms.JMSException: Unable to connect to JMSServe
    r (localhost/127.0.0.1:9127)
    at com.evermind.server.jms.EvermindQueueConnection.connect(EvermindQueue
    Connection.java:144)
    at com.evermind.server.jms.EvermindQueueConnection.send(EvermindQueueCon
    nection.java:94)
    at com.evermind.server.jms.EvermindQueueSession.send(EvermindQueueSessio
    n.java:117)
    at com.evermind.server.jms.EvermindQueueSender.send(EvermindQueueSender.
    java:75)
    at com.evermind.server.jms.EvermindQueueSender.send(EvermindQueueSender.
    java:36)
    at com.evermind.server.jms.EvermindQueueSender.send(EvermindQueueSender.
    java:31)
    at examples.jms.queue.QueueSend.send(QueueSend.java:71)
    at examples.jms.queue.QueueSend.readAndSend(QueueSend.java:120)
    at examples.jms.queue.QueueSend.main(QueueSend.java:106)
    Any idea what might be causing this? Or is a remote client not allowed to send/receive messages from queue with oc4j?
    Thanks again,
    Bakul.

  • Are there any monthly calendar templates for Pages?

    Are there any monthly calendar templates for Pages?

    Take a look at the user-contributed templates at iWork Community.

  • OFSAA CRM ERROR 16616 - Are there any list of errors for consult

    Hi gys
    OFSAA CRM ERROR 16616 - Are there any list of errors for consult about CRM ?
    regards
    Daniel Daniele

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

  • Are there any good free templates for motion like the 8 that come with it?

    Hi,
       Are there any decent free templates out there for Motion - similar to the ones that it ships with (ie small intros, lower thirds, etc..)
       Thanks!
      - Jack

    You may want to check here first.
    http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates

  • Are there any third party pacakages for plant maintenance that can be interfaced with

    are there any third party plant maintenance packages that interface with OPM? does Oracle apps have a module for plant maintenance?

    I'm working for a leading Food Industry in Kuwait (The Kuwaiti Danish Dairy Co.) We have a massive implementation of OPM with 24 modules, BI tools (OSA, OFA) and Maximo (The only third party package) integrated with Oracle. OPM version is 11.0.3 on database 8.0.5. Now you have option of 11i (eAM) with POC (PM) or Maximo 5i integrated with 11i (and of course any other 3rd party solution which can be integrated with OPM).
    You can write to me on: [email protected] or call me on: +965-9650172 for details.
    All the best.

  • Are there any wall mount brackets for the new iMac 27" 5k?

    I have a wall mount (Bretford) for my Cinema HD Display that I have been using since 2008.  I just purchased the new iMac 27inch 5k computer.  It would be great to be able to use this computer with the wall mount.  The ones that are available (VESA) from the apple store and say they will work with some older iMacs.  My question is are there any available for the iMac I purchased? Thanks.

    Hi. The VESA mounts for the iMacs are not "changeable": either you buy an iMac with a pedestal, either you buy one with a VESA mount, but you cannot switch, because the VESA mount is the first thing built in the iMac. You would need to sell your 5K iMac and buy a VESA 5K iMac.
    iMac (Late 2012 and later): VESA mount compatibility - Apple Support

  • Are there any third party apps for Mavericks outside the Apple store?

    I am looking for a way to highlight / color code the full file or folder name. Mavericks changed my color codes to small dots, worthless.  Are there still such things as "helper" apps or "plug-ins" that change the way finder behaves, or has Apple locked down Mavericks such that only approved apps from the App Store at iTunes are what is available?

    Take a look at PathFinder
    ...has Apple locked down Mavericks such that only approved apps from the App Store at iTunes are what is available?
    You can install any Apps you want from Any sources.  You may get a one time message that the App is from an unidentified developer, but just click ok, and you won't get the message again

  • L520: are there any Win 8 drivers for Ericsson 5521gw WWAN card?

    I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
    Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

    I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
    Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

Maybe you are looking for

  • How can i delete all history, except open windows and tabs?

    hi, i can not find any way to delete all my firefox history, except open windows and tabs. i could not find any solution about in the web. i did try almost all settings in privacy settings, nothing works. any ideas how to do that, or maybe suggestion

  • Second MacBook Pro with a problem

    My first ordered MacBook Pro had a crooked lid. Apple replaced it for me. The next one's lid closed perfectly but since the hard drive made a strange clicking noise, I called Apple Care and they told me that the hard drive must be broken and that I s

  • METERIAL FOR REALTIME TICKETS IN SAP SD

    HI GURUS PLS ANY BODY PROVIDE METERIAL FOR TICKETS IN SD. AND ALSO SEND SOME REALTIME TICKETS AND POSSIBLE SOLUTIONS PLS SEND ALL TO MY MAIL ID   [email protected] thanks@advance Hari

  • Startup account user icon

    Where does the startup user icon come from? Under accounts you can choose cat/butterfly etc. Somehow mine has become a shadow of a person with white swooshes on a blue background. This picture is not in the list under account system preference. I lik

  • Unicode & fonts

    hi, it is great that java supports unicode internally, but how do i make unicode characters printable? i have read about 10 pages now and none gives a straight-forward answer.. anyone please know? thanks. -m