Area of Bridge not displaying

Whether I open Bridge Full Screen or Minimise the full content of Bridge does not appear. The right hand side is missing (the close down cross shows). I can put the Content on the right or Preview on the right or even have a horizontal bar but however I put the window panes I cannot see the righthand side properly. If using a horizontal bar at bottom for images then the scroll bar does not show full and cannot get to the end of the line. If a pane is used on the right then the vertical scroll bar does not show. In other words the right hand side of the Bridge panes do not display fully. Any answers.

the Attach Files function is a bit bugged at the moment, use the camera button to add pictures. Not sure i understand your problem without a screenshot by try reseting the preferences and maybe even the standard workspaces by holding Ctrl as soon as you launch Bridge(you have to be fast, you should get a dialog box before Bridge shows up if done right/fast enough)

Similar Messages

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Firefox 3.6.3 - ebay pages are centered, do not display full width of screen

Upgraded to Firefox 3.6.3 and my ebay pages are centered and do not display full width of screen as they did in the previous version. Most other pages will automatically adjust to the full width of the screen
== This happened ==
Every time Firefox opened
== Firefox 3.6.3 upgrade

See if anything here helps you. <br />
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

CRM BP type Sold-to-party Sales Area Data button not displayed

Hi Gurus,
Currently we are in the system preparation stage, but there's a problem in BP maintenance. For the BP type Sold to Party, the sales area data button is not showing up in the button bar with the General data. I only can see General data and Relationships here.
The sales area has been maintained in the system already and can be displayed in the reference bp. Not sure any config will affect.
Appreciate if anyone can give me a clue.
Rgs, Michelle

Hi,
If you have chosen the role, and the button is not coming up following could be the possibilities:
1. It might sound funny but it is a possibility that You might ALREADY be in the Sales Area data screens. Check if the "General Data" button is active. if it IS active then you ARE in the Sales area data.
2. If not 1, above, then check the authorisation for the id to create BP for Sold to party and / or Sales area.
3. Still No, then check if the screen config for creating BP is std or its a customised one wherein maybe the button has been rendered inactive. You can check by taking an existing BP who might already be a sold to part for a sales area. If this is your first case for a Sold to party then you might look at the screen config for sure.
Do write back if you still need help.
Regards,
Tariq

Bridge not displaying SOME images

Hi, stumped on a problem I am having with Bridge CS4. Some images are not showing up at all. I know they are in the folder since I can see them in Windows Explorer or if I naviagate to the folder when placing files in InDesign or Illustrator. All the images are the same file types (tif, jpeg, psd, png) as the other files I CAN see. Have tried refreshing, clearing cache, restarting, etc. but this has been ongoing for a while. Any suggestions would be appreciated!

I see nothing at all. For example, I have images A1, A2, A3, A4, A5 that exist in the folder. In Bridge, I only see A1, A3, A4. It seems random what images are not appearing. I should also add that my counterpart that sits in next cube over CAN see all the images in Bridge.
Dan Jackson
Marketing Specialist | Auer Steel & Heating Supply Co.
Direct: 763.450.9249
Like us on:
<http://www.facebook.com/pages/Auer-Steel-Heating-Supply-Company/185497081490925

Pictures in iBook are partial/missing not displaying correctly

I downloaded new iBook called "Foundation" and the pictures are incomplete/partial/missing. Tried deleting the book and re-downloading and still same problem. Some pictures are complete, some partial and some just have a question mark inside a blue box (where the picture is supposed to be i am guessing). There are also pages that have a large pink box that says ... "This page contains the following errors: error on line 1 at column 1: Ending error. Below is a rendering of the page up to the first error." I could live without the pictures but this is an exercise book and the pictures are very important! Any help is appreciated.

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated!
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

CS6 Bridge "Not Displaying Subject Distance Information in Exif Data"

In Bridge CS5 the "Subject Distance" information is displayed for Zoom lenses which report distance information, under the Camera Data (Exif) panel.
In Bridge CS6 either 64 or 32 bit, no "Subject Distance" information is displayed for the same files, which report this information under CS5 bridge.
I have checked that the "Subject Distance" is checked and turned on under the preferences section. Not sure if the data is either not being read or just not being displayed.

Thanks Ian,
Read Metadata from File isn't the answer since doing this obliterates everything that has been added to the metadata since the original import, but does add the Subject Distance. I'm using RAW (NEF) files without xmp sidecars. If I save to xmp and then Read Metadata from File, it works. I just hoped there might be a simpler way to get the Subject Distance into the catalogue. I also have many jpg images in my catalogue (before I started shooting raw) and the xmp solution can't be applied to those, although I could save the metadata to the jpg files (I don't really want to do that either). I originally started with a Nikon D50 and those images have Subject Distance in their Exif data, so the information is there for all my images, I just need an easy way to get it into the catalogue.

Why are some emails not displaying remote images

There have been a few threads on similar subjects but I haven't found a solution, or even a reason for the problem I'm seeing.
I've the display remote images option to "on" and in most of my emails images are shown. But for all the messages from one domain no images are ever displayed. The URLs are valid because the images show on my iMac in Thunderbird. On my iPhone I get a placeholder (box) with either a question mark or the "alt" text for the image.
Does anyone have any ideas about what might be causing the problem?

Sent messages moved to the account's Sent mailbox indicates the message was successfully sent by the SMTP server used to send the messages with the account but is no guarantee the message will be accepted by the recipient's incoming mail server.
The recipient's incoming mail server may be incorrectly flagging messages sent by this SMTP server as junk (messages sent via webmail access for the account does not use an SMTP server) and with the large amount of spam being circulated, a return email error message from the recipient's incoming mail server is no longer always provided if the message was not accepted by the recipient's incoming mail server or when flagged as junk by the incoming mail server.
This is not a problem with the Mail application. The recipients reporting this problem need to check with the email account provider for their account.

Why are TypeKit fonts not displaying correctly in Pages (iWork)?

I have just subscribed to TypeKit and am experiencing highly peculiar behavior from the two fonts I’m using in Pages (iWork): Basically, fonts in my document don’t respond appropriately to requested changes in style. For example, if I increase the point size by one point using the the formatting commands built into Pages, the font drops a point size. I’ve had the same experience using the kerning command, where the kerning decreases when I have set it to increase. (So far, the only fonts I’ve been using have been Futura PT and Proxima Nova.)
Look at the example in the screenshot: “FEATURED EXPERT” on the top line shows in Pages as being 24pt Futura PT Book. However, “SOLO,” a few lines down, which is definitely displaying as smaller, shows as 25pt Futura PT
In a potentially related issue, when I reopened this same document today, text boxes were suddenly too small for the text (again in Futura PT and Proxima Nova). It was as though Pages was suddenly reading those two fonts differently.
I have had no issues with other (non-TypeKit) fonts in the same document.
Anyone else experiencing anything similar? Any suggested fixes? I'm reluctant to unsync/resync the two affected fonts (the only ones I have sync'd to date) because I don't want to wreck the document!

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated!
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

Web Gallery created in Bridge not displaying first picture correctly on a Unix server

Hi Guys, Am really stumped by a problem that has surfaced after moving from a Windows web hosting server to a Unix hosting platform. The Web Galleries created in both Bridge CS4 and CS6 display and operate as expected on the Windows server. However, having moved to a Unix hosting platform, I observe an odd behavior when going to the Web Gallery page. When the gallery loads, it displays the first image offset. This is always the top left hand quarter of the picture, offset to show in the bottom left hand corner, leaving the top left and right quarters and the bottom left quarter black (I use quarters to best describe the situation, though it really does seem as if the view port of the Gallery is indeed quartered for this first image).
If I click on the second image in the series, it appears full size. The same happens if I click on the "Play" button. If I return to the first image manually, it displays full size.
The phenomenon is apparent in Firefox 19.0.2, IE9, Opera and Chrome, all of the latest build.
Can anyone throw some light on why this phenomenon is occurring and better still, suggest a cure?
Grateful for all and any help anyone can give.
Cheers, Daviddhg

Hi Guys, This turned out to be a Unix server-side issue. Apparently the compression software being used by the ISP on this server was in some way incompatible. The ISP turned the compression off and the problem was cured.
Cheers, Daviddhg

Bridge not displaying and opening originals with changed copies ?

Hi
I have CS-3 (10.0.1), & Bridge 2-1-1-9, on XP-SP2
I open a TIF file, make some changes, and save the file to a NEW NAME in the same folder, also a TIF.
But after that, despite
1 - purging cache
2 - restarting Bridge
3 - rebooting
when I select the ORIGINAL file, Bridge has recently taken to now consistently showing the CHANGED version in the preview window, & the Metadata looks pretty much the same too. As I choose to have TIF files open in ACR, ACR also opens the NEW version when I select the ORIGINAL. But when I uncheck that option so the file opens in PS, the ORIGINAL correctly opens.
Any ideas ... ?. ...
Thanks
MJ

What's weird is that in the Bridge Content TAB, it's correct.
Also -
I have just repeated the exercise, and the MODIFIED date on the new version is 2 seconds later, but of course of took more than 2 seconds to make & save the change. Create date is the same - is this right ? It IS a new image ...
I then deleted the new version , purged the cache for the folder, closed & restarted Bridge, and the problem remains.
What is weird about this is that the SAME ORIGINAL image previews & opens in ACR as the DELETED file, but still looks OK (i.e. as the original) in the Bridge content tab & opens OK as the ORIGINAL in PS.
Even purging "common" cache does not help.
Conclusion - I have 2 sets of data in the one image file ?

Why are my photos not displaying and exporting properly?

I bought LR5 and have been using it for a few months with no problem. Out of nowhere, my photos don't export properly and my photos look worse in the "Library" module than the "Develop" module. The photos are not sharp, noisy and the color and contrast are wrong. If I zoom to 1:1 in Library the problem fixes itself but the photos still will not export with all the edits I've made. It's NOT my computer screen so please do not suggest I re calibrate it. I am running on a MacBook Pro with Yosemite! Thank you in advance for your help!

Get SmugMug photo sharing. For a few dollars a year your photos will look fantastic. It is much better value and has unlimited storage unlike Photoshop.com and the full screen slideshow with captions look even more impressive on widescreen monitors.
What's more, you can upload photos to your SmugMug albums directly from the PSE Organizer.
http://www.smugmug.com/

Why are Unicode Characters not displaying properly anymore ?

Hi,
I've just update my firefox Mac version 19.0 to 20.0. The big problem is I cannot see our Burmese Unicode character anymore.
I can see burmese character at ( www.facebook.com/futurewayeducation ) with 19.0 without doing any setting but with 20.0, I am hopeless now. The page is writing with a font call Zawgyi-One. The font location is ( http://code.google.com/p/zawgyi/wiki/MyanmarFontDownload ). Now I have just one solution left which is removing this 20.0 version and use 19.0 or Switch Browser.
Thanks.
Zay Yar

Screenshots are attache for reference.
Thanks.

Regarding trading partner business area value is not displayed.

hi all.
am modifying the standard program( foreign currency valuation)...in tat i have to add pargb field extra.....the value is coming in debugging mode and it disappears while clearing and it is not fetching after tat..the same thing working fine in 4.7 version,,but not in ECC....
PLS GUIDED ME IN THIS
Edited by: sai on Dec 4, 2008 1:40 PM

Please, Can you send me the answer.
Thank you.
Best regards

Just installed Firefox 10. For long web pages which are forms does not display the bottom. Looks fine if source if viewed.

Web Page with long form to fill in. Worked on Firefox 9. Works
on IE. Now doesn't work. End of form and submit button is missing. Rest of form looks good. The source is correct. Just quits displaying

Hi,
Please try a '''Ctrl''' + '''F5''' refresh. This helps to bring in the page contents afresh. If the problem persists please check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] Please also check if the page can be fully loaded alone with no other tabs loading.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Area of Bridge not displaying

Similar Messages

Maybe you are looking for