Arrow Left key and arrow Up key and fn key not working properly !? Lenovo G580 PLEASE HELP x_x !

Hi guys i have a Lenovo G580 im not sure which version but i can tell you its intel i.3  and its got usb3.0 on it and 500gb hdd. 2.20Ghz  4.00RAM.   
been days that i try to solve my Fn Key problem and also the arrow left and arrow up keys < i was using Win8 and downgraded to Win7 last week and that problem has occured since ,it misbehaves and it only works for a short amount of time it randomly works those keys FN.arrow up/left keys randomly they work , i upgraded again to Win8.1 now for the first few boots evrything worked well fn key and arrow keys np.< and now again it stops working.. and btw. whenever i press hard against it it would work pressing down the fn and arrow left/up keys when i press really hard it works but then again it doesnt Soo end of the story its not functioning properly and i have Energy management and Display driver HD 3000 installed and i still got this problem .. is there any fix to this anyone please !? 

Hey mate the keys are faulty nothing can fix it except for buying a new Replacement! , i fixed the problem simply by Replacing the KEYBOARD !  i went downtown and looked for a g580 keyboard and they didnt exactly have the same version g580 they had c or b580 i dont remmber what letter it was sorry ! but the thing is the whole keyboard layout of many Lenovo Laptops are the same just look one thats the same, cause mine wasnt for G580 but the thing is its still working perfectly ! only problem is the Screws didnt fit i had to cut out the sides of the screw hole thingies to make the keyboard fit in well in my G580 , Simply put all you need is a new keyboard replacement buy one they cost between 20-40$ worth it cause you wont have any faulty keys anymore evrything will work fine. no need to reinstall anything just replace it with new Keyboard. and Plus its easy to replace it by yourself. i replaced mine by myself easily. Problem fixed.

Similar Messages

  • " help me please"  I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

    " help me please"  I have Windows 7  32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
    I have to boot with a Windows
    When I use the Mac operating system not have a problem  and DisplayPort to VGA Adapter Working properly
    why does not work with windows ?
    What should I do؟
    I'm grateful to give advice
    tanks
    [email protected]

    Someone in another section answered this. Thanks.

  • Hi ! Please my iphone is on the activation page and i can't do nothing, there is a sim card into but itune don't recognise it, and the phone don't want to activate. I tried everything, and before the reboot the iphone 3 was worked verry well. Please help

    Please my iphone is on the activation page and i can't do nothing, there is a sim card into but itune don't recognise it, and the phone don't want to activate. I tried everything, and before the reboot the iphone 3 was worked verry well. Please help me !

    Hello there, rebeccallouche.
    The following Knowledge Base article offers up some great steps and links to some additional information that is pertinent when having activation issues with your iPhone:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Additionally, if the iPhone is not being recognized in iTunes this article will be useful as well:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT201412 my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    my wifi button does not working / it looks grey and can not open it... and my some applications does not working too ... please help me ... I bought this I phone from Beirut/Lebanon and i live in Turkey...

    Here you go:
    http://support.apple.com/kb/ts1559

  • HT3176 Ive lost my old apple tv(1generation) remote and I bought a new one. Im trying to move the arrows and its not working. Can you please help me!

    Ive lost my old apple tv and I bought a new one. When I try to mmove the arrows of the remote it dosent work. Can you please help me!!

    http://support.apple.com/kb/HT1555
    "Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair."

  • Scrollup and down icons not working in ALV. Please help!

    Hi Experts,
           I have a ALV webdynpro ABAP report. I have to show only fixed no of rows.
           But the scrollup and scroll down icons in the ALV (^) not working when I use subtotal (aggregation).
           Interestingly scrolling works perfectly if I remove my subtotal code.  
           My subtotal code is like this:
    *...Sort PRODUCT and group it for subtotal
    *lr_field_settings ?= l_value.
    *lr_field = lr_field_settings->get_field( 'PRODUCT' ).
    *lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
    *lr_field->if_salv_wd_sort~create_sort_rule( ).
    *l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE(  ).
    *l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
    *l_sortrule->set_group_aggregation( ABAP_TRUE ).
    **...Aggregate Field QTY
    *lr_field = lr_field_settings->get_field( 'QTY' ).
    *lr_field->if_salv_wd_aggr~create_aggr_rule( ).
    *lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule(  ).
    *lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
    **lr_field_settings ?= l_value.
    **lr_field_settings->set_group_aggr_displayed( abap_true ).
           One more thing, In addition to subtotal it also shows grand total in the end. Is this the normal feature or my code for subtotal is wrong?
           So what could be the problem?
           Any sample code will be really helpfull. Please help!
    Thanks
    Gopal
    Message was edited by:
            gopalkrishna baliga

    Hi Gopal,
    Please try to build the effect you commented out in the settings of the ALV. You can save it as a special layout. If scrolling works then, you should check which part of your coding leads to the problem and possibly correct it.
    If this is not possible, just create an OSS message.
    Ciao, Regina

  • The keys on my mac book pro (2009) are not working properly, both letters and numbers.  I think I pressed something,but I cannot find a numlock key or other to undo this problem

    Both the letters and numbers on my mac book pro (2009) are not working correctly, but the caplocks key still lights up,the delete key is like a back key,the o key is enter,etc. I think I must of pressed a button but I cannot find numlock or the action to fix it back to normal.
    Need Help Please

    Try this. Open one of your files. The window that contains your picture is named at the top. Command click on the name and you'll see the entire path starting with its name and then moving to the folder, the folder it is contained in, etc all the way to down to the hard drive volume name. This should tell you where to find the folder.

  • I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help

    I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance

    You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT1349 iTunes and Windows 8 will not work!!! Please help!!!

    I just purchased a new sony vaio laptop computer with Window's 8 and I have uninstalled and installed itunes over 5 times and it will not work. When attempting to open it, a box pops up that says "ITunes has stopped working: A problems caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.". I have motified the compatibility under each selection, I have changed my securing options and nothing works. I am overwhelmed and frustrated with this issue!! Please help how to make this work, so disappointed with itunes!!!

    I have the same problem!

  • ITunes and iPod not syncing properly...please help

    When i sync my 60GB video iPod with iTunes it starts to work, a few files or podcasts are copied then it seems to get "stuck" then an error message appears:
    attempting to copy to the disk "My Ipod" failed. The disk could not be read from or written to.
    Ipod software and itunes are the latest versions.
    I've restored the ipod without success, in fact this was a pain as all my music was wiped from the ipod and can only be put back on a gig at at time. I synced with itunes on my other laptop PC and this worked fine so i think the ipod itself is ok.
    see below for the diagnostics report for the ipod:
    Also iTunes is also having some problems closing down properly and can be a huge resource hog (50% CPU) sometimes, this was never a problem before. Should i remove and then re-install itunes? The only other thought i had was some kind of problem with album art which i have attached to music files using itunes art importer. I did this ages ago and it has never been a problem before.
    Anyone got any ideas?
    Thanks in advance....
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    To Be Filled By O.E.M. To Be Filled By O.E.M.
    iTunes 7.1.1.5
    iPodService 7.1.1.5 is currently running.
    iTunesHelper 7.1.1.5 is currently running.
    Current user is an administrator.
    Connected Storage Devices:
    DiskDrive, HDS72251 6VLAT20 SCSI Disk Device, Bus Type SCSI, Bus Address [0,0]
    DiskDrive, Apple iPod USB Device, Bus Type USB
    DiskDrive, Maxtor OneTouch III USB Device, Bus Type USB
    Universal Serial Bus Controllers:
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A. Device is working properly.
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B. Device is working properly.
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C. Device is working properly.
    No IEEE 1394 Host Controller found.
    Connected Device Information:
    MAUG'S IPOD (I:\), iPod with video running firmware version 1.2.1
    Serial Number: <removed by host>
    Bus Speed: 61440
    The last connected iPod serial number: <removed by host>.
      Windows XP  

    Re: conflicting software. I'm not sure what would conflict with iTunes. no new antivirus/spyware or firewall software installed.
    hmmmm. let's follow up on that anyway. firewalls typically have to generate a new set of rules for iTunes (and QuickTime, and some of the itunes background processes) when you install a new version of itunes.
    try the techniques described in the following document (but leave your ipod service enabled):
    Using MSCONFIG to troubleshoot conflicts in Windows
    do you still get that message after connecting the ipod after doing a selective startup?

  • My ipad updated to IOS 7 today and now some of my apps are not working properly

    I updated my ipad to IOS7 and now some of my apps are not functioning correctly.  Is there anyway to revert back to previous software?

    I assume that you are familiar with your iPad's portrait orientation lock feature and you have verified your iPhone is not locked in this manner.
    In case you're not familiar, please make sure this icon does not appear on your iPad's status bar:
    If your iPad is not in portrait orientation lock, then the app developer should be prodded into updating their app to fix this defect.  Generally speaking, the App Store indicates a way to contact the developer to inform them of such defects.

  • Vodafone and Docomo SIM is not working on my iPhone3GS please help me

    when ever I insert Vodafone or TATA Docomo SIM its not working on my iPhone 3GS and its very disappointing but only Airtel SIM works. I dono why.. and if we have any fix please help me so that I can update.

    but how to unlock for other networks ???? please help me

  • HT204053 I want my apple id and the rest to be in canada not UK. Can someone please help me

    I got 2cents left in my account in but in UK. I want myaccount to be in canada because thats where i live. Please someone i need help i cant buy anything in UK my card dont work there.

    If you are getting an 'account not in this store' error message then try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada.
    Or by having '2 cents' you mean 2 pence i.e. UK money ? If you do then you can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Lync 2010 and Lync 2013 blinking icon in taskbar not working properly

         Hi,
         We're experiencing a strange behaviour. Lync IM notifications are supposed to work this way below:
         1) Notification bubble on the right-bottom corner
         2) After a few seconds, a blinking icon in the task bar
         3) After a few seconds, a coloured icon remains in the task bar
         Some of our users, both Lync 2010 and Lync 2013, go 1) and 2) but then icon won't remain in the task bar, so they don't realize they have a conversation waiting (Windows XP and Windows 7).
         If they open the icon, the conversation is there and coloured, and they can answer.
         In my computer, it has also happened but most of the time it works fine (testing it, maybe it works 15 times and fails 1). Nevertheless, a lot of people is suffering from this strange behaviour.
         We have looked into the causes but haven't found anything.
         Any clue?
         Thanks!

    How long have you seen the problem?
    What version of your Lync client? Try to update your Lync client to the latest version.
    Try to repair office 2013.
    Uninstall and reinstall Lync 2010.
    Please install Lync 2013 or Lync 2010 on a fresh installation of Window to check if you can still see this problem.
    Lisa Zheng
    TechNet Community Support

  • Hulu plus, and netflix not working on Apple TV Please help

    Hulu plus, netflix and itunes store wont open on my apple tv.  I cheked the internet connection and apple tv says it is conceted to my wi-fi.  The internet and hulu and netflix will all work on my other devices in my home but just keep getting can not access at this time messages from the Apple TV- We dont have cable so it is really bad that the apple tv stoped working can anyone help! please,

    Power cycle the ATV and router.
    If the issue persists, ensure that the the DNS settings on the ATV are set to automatic.
    Also, if using a proxy or VPN to connect to the Internet, try bypassing.

Maybe you are looking for