Article automatically closes after updating the article in the folio builder?

For some reason, every time I update an article in the folio builder, the article closes automatically - this is extremely annoying because I like to keep all articles open while working and hate that every time I update, I must reopen it. It seems to be a setting but I've searched preferences etc and can't find any setting to turn this off?
Thanks so much for your help!

Hi there!
Thank you so much for your reply -
It is only happening with a particular folio yes (my ipad rendition in particular). Other folios update and do not close the updating article.
I'm using the latest cloud version of InDesign - whichever one in the creative cloud app that's currently running. And I use Mac.
I reset the preferences as you suggested but it is still closing the article - it's very strange because it only does it with that particular folio. At least it only does it with that folio or I'd pull my hair out haha

Similar Messages

  • I-photo has been working brilliantly until after my last update. Now it automatically closes after 10 seconds. The warning box appears but offers no solution. I have reloaded the software, but this has made no difference. Has anyone else experienced this

    I am having problems with i-photo. It automatically closes after 10 seconds. the warning box gives no guidance. Anyone else had this problem?

    What "warning box"?
    Assuming you're using iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • HT1386 I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".

    I HAVE A PROBLEM WHEN SYNC CONTACTS IN MY COMPUTER TO IPHONE 4S after update to iOS6. The message are " waiting for change to be applied".
    PLAESE advise how to solve this problem.

    Hi applerinneedforhelp,
    Thanks for visiting Apple Support Communities.
    If iTunes is asking you to authorize the computer, and you've already done so, the troubleshooting steps in this article can help:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    Jeremy

  • HT201210 I have 4s facing hang problem after updating when i dicline the call the keypad geting locked ,touch stop working unable to unlock the phone .then what i can do i restart the phone with pressing home key & power key together then i am able to ace

    I have 4s with 16GB storage capacity using IOS 7.1.2.
    Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
    Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
    Kindly resolve the issue as soon as possible
    Ashish
    [email protected]

    Did you already try to set it up as a new device, as explained in this article?
    iOS: How to back up your data and set up your device as a new device

  • After update my iphone6 plus the screen is now black and white

    after update my iphone6 plus the screen is now black and white

    Hi amagarcia,
    It sounds like you have Greyscale turned on. To turn it off go to Settings > General > Accessibility and make sure that option is turned off. For more information take a look a the article below. 
    Use Accessibility features in iOS
    https://support.apple.com/en-us/HT204390
    Take it easy,
    -Norm G. 

  • After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

    After updating to iOS 7 the contact photos no longer appear when I receive a call. How can I get them to show again?

    I'm having the identical problem on my iPhone 4 after upgrading to IOS 7--no ability to update apps or download new apps.  Here is what Apple tech support emailed to me:
    I understand that you are unable to download or update applications after updating iOS7 on your iTunes. I know you must be eager to get this resolved and I will be happy to help you today.
    ... to help you better with this issue I would request you to please try this steps given below to resolve your issue.
    Please follow this steps:
    1) Double tap the home button
    2) Hold down on an icon
    3) Tap the red "X" on iTunes, and the App Store.
    4) Tap Settings > Store > Tap your Apple ID, and choose sign out
    5) Tap Settings
    6) Tap General
    7) Tap Reset
    8) Tap Network Settings
    Once it has been closed with multi-tasking, and you have rebooted the device in the network settings reset, please sign in, and try again. 
      Howevr, if you are facing the same issue than for this issue, you may need to call our AppleCare technical support team. A technical Advisor will be able to tell you about Apple's complimentary and fee-based support. The technical Advisor can also assist you in determining what option might be most helpful to you in this case.
    Mildly amusing that the instructions for force-closing a program are the IOS 6 instructions, which do not work on IOS 7. 
    Otherwise I'm having a little success with this.  Some apps (not all) are updating. It seems that a few more apps update each time I go through the process (close everything, sign out, and either reset or reboot, then go to the app store, sign in and try to update all).  So far it has been a very lengthy, iterative process. 

  • After updating to iOS 6 the App store is in Korean instead of English.

    After updating to iOS 6 the App store is in Korean instead of English.  How do I get it back to English?  I understand the reason that it may be in Korean because I am living in South Korea right now.  But I have all of my settings set to English only.  So why is the App store in Korean?  The App store is the only app that is in Korean. I have add this account in English the entire time I've been here with no issues until I updated it.

    Never mind, I sorted it myself. I just had to go into my iTunes account settings and that automatically redirected me.

  • Form automatically close after receiving a specific number of submissions?

    Hello,
    I am using the form as a registration tool for an upcoming event.  How do I get the form to automatically close after receiving a specified number of submissions?  There are only 15 spots and 700+ folks may see the form.  I need for only the first 15 to have access to the form.  Thanks.

    We don't currently have an automatic way to close a form after a set number of submission. You would have to watch for submission and close the form manually.
    Andrew

  • Can you make core center automatically close after being called on startup?

    Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
    If core center really cant do such a simple task then can speedfan or another program?

    Quote from: bassmadrigal on 13-July-05, 07:42:36
    Why don't you want them running. Speedfan has a very small footprint.
    Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
    Quote from: syar2003 on 13-July-05, 07:57:02
    You dont have to have it running to set a user specified fan rpm .
    Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
    So to answer your question .
    There is no need to have it autostarted at each boot ...
    Thats how i have used it .
    Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
    Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

  • HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!

    After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter.  From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer.  Help!
    I have signed out then back into the cloud.  I have comfirmed location of the photostream folder.  I have have even restored settings on my phone.  any ideas on what I can do to get it working again?  or do I have to accept defect, and manually save my photos?

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • After updating to iOS 8 the AV connector is no longer working,

    after updating to ios 8 the av connector is no longer working, I use this to teach the iPad and it is frustrating to not be able to use the connector which worked perfectly well on ios 7
    <Re-Titled By Host>

    Hey Mastmate,
    Thanks for the question. There is a troubleshooting section in the following resource that may help to resolve your issue:
    iOS: About Apple Digital AV Adapters
    http://support.apple.com/kb/ht4108
    Thanks,
    Matt M.

  • Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

    updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Still getting same error message. Can anyone help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • After updating to iOS 8 the iPad Air is getting crashed frequently including safari

    After updating to iOS 8 the iPad Air is getting crashed frequently including safari.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.
    You may need to restore your iPad. That's where you back it up, then restore it to factory defaults, then put your backup back on so you don't lose any data. Sometimes a fresh start clears out any glitches and can help.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • HT4623 After updating my IPAD 64 the typing has not been the same.  It takes 3 minutes to type in my password.

    After updating my IPAD 64 the typing has not been the same.  It takes 3 minutes to type in my password.  Has anyone found a repair for this?

    Reset all settings
    Settings>General>Reset>Reset All Settings

Maybe you are looking for

  • How do I Transfer Mac Address Book to a Phone

    Im not what you'd call a techie or an early adopter.  I just recently got a Macbook Pro.  I've input my contacts into the Address Book but am wondering  how do I transfer that to a phone.  Is there a way?  I'm assuming there's an easy way to do that

  • Serie U : How to buy the laptop in orange or in bronze?

    Hello, As you already know, the IdeaPad Serie U is decline into several colors like blue, red, grey. But the URL below displays an image showing two additional colors : orange and bronze. http://shop.lenovo.com/SEUILibrary/controller/e/frweb/LenovoPo

  • How to Get Exchange rates based on the date ?

    Hi Friends, I have a table called "ZEXCH" with fields MANDT, BUDAT, WAERS, KURSF. This is a maintainable table .... (ie) user can keep on adding the Exchange rates for the currencies for a particular date.... My table contents are: MANDT BUDAT      W

  • VPRS condition type not to display

    Hi all I have condition type VPRS in my pricing procedure but my client wants it should not be display to the all user while creating sale order. Is there any way. Kindly replay urgently. Vinod

  • Need Zen Micro Photo

    My friend gave me his Zen Micro Photo MP3 player because he wanted to use his Ipod but he didn't give me a cd. Could someone rip there CD and save it as a ISO for me please. Let me know if anybody can help me out with this. Thanks