Artwork will not load into album. Any work around to get it in?

tried different formats, sizes, names...no luck. Thanks

do you know what format the audio file is? itunes has a hard time editing metadata with some some audio formats. try right-clicking the track(s) and choose 'create aac version'. see if you can change the artwork on the new aac version.
Let me know if you need more help
-Ry

Similar Messages

CR files will no longer show in bridge and will not load into PS

Hi I had a problem with bridge CS6 dynamic link failing and had tech support finally help with the problem by phone They had me reinstall PSCS6 and Bridge among other things like setting the permissions differenty. It worked ok when I opened it again after those changes and then I closed the apps and opened them again the next day (today) but now the CR files will show no thumbnails nor previews in bridge and will not load into PSCS6.
I get now the following error messages
These are files that are on my system and not from a camera plugged into the computer. They had worked just fine before the reinstall and permisisons changes the tech had me do. They open in the preview app and look fine so I know they are not corrupted files and I have tried different saved versions of the same (or any other CR file) and none of them will now open and Camera raw itself seems no where to be found. My prefences in camera raw have not clanged. Any ideas??? thanks and aloha, UP
I tried image processor in bridge to make them PS files and got the following error message.
I tried to load one of the CR files from the finder dirretly and got the following error message.
Any help would be appreciated. If the post goes inanswered I will call tech support again. aloha UP

HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used for more thatn a month.

The .prel files will not load into premiere elements 13 and says that there is a missing codec. This is a school's site llicense that we've used in our lab for more than a month.

GPPNeil
Premiere Elements 13 on Windows 8.1 (assumed 64 bit).
First..
1. Have you updated from 13 to the 13.1 Update using an opened project's Help Menu/Update. If not, please do so.
2. Do the problems exist if you disable the antivirus and firewall(s)?
3. Are you running the program as Administrator? Do you have the latest version of QuickTime installed on your computer?
4. Have you refreshed the Online Services using Premiere Elements Editor Edit Menu/Preferences/Web Sharing?
5. Have you updated the Adobe Application Manager?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
6.Is your video card/graphics card driver version up to date according to the web site of the manufacturer of the card?
7. Lots more we could go through such as deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole
13.0 Folder in which it exists.
But, I think that you have enough things going on here to warrant an uninstall, free ccleaner run through (regular cleaner and registry cleaner parts) and then reinstall with the antivirus and firewall(s) disabled.
CCleaner - PC Optimization and Cleaning - Free Download
If the problems persist after all that then we will adjust to additional troubleshooting maneuvers.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

My Nikon 7100 RAW files will not load into Iphoto.

My Nikon 7100 RAW files will not load into IPhoto. The computer will recognize the files once the download is complete, but fails to finalize. My version of IPhoto is 7.1.5 and my computer is a Mid 2007 Mac Mini Model. I have Light Room 5, but my wife and I are prefer IPhoto for basic download and sharing. Is there a possibility of getting the RAW files to download ?

what version of the OS?
You need Mt Lion and iPhoto '09 for your camera RAW support - OS X Mountain Lion: Supported digital camera RAW formats -
If your computer will support tMavericks do the free upgrade to it and purchase the upgrade to iPhoto '11 version 9.5.x in the App store
LN

All of a sudden my CDs will not load into my iTunes ...

I just recently noticed that cds will not load into my library, nor will iTunes prompt me to play them when inserted. You can hear the machine plunking along as if trying to read it, then it will automatically eject. What gives? Have not had this problem before...I am running iTunes 9 on a iMac with OS 10.4. thanks.

Hey aj5c,
Let's see if resetting Safari helps the issue:
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/PH11914
For best results, make sure all of the options are checked.
Thanks,
Matt M.

Any reasons SWFs will not load into an application?

I've loaded thousands of swfs before into applications/components, but now I have an application (component) that won't load a swf - no matter where I put it, not matter how I load it (I've tried using a static <mx:SWFLoader source="test.swf" /> with the test.swf in the same directory as the component). I've also tried with a combination of the SWFLoader control with ActionScript and I tried loading it using all ActionScript (var loadTheSWF:SWFLoader = new SWFLoader() method).
I even wrote a test application to load the test.swf - that loads fine.
This particular component is very busy, I'm wondering if I've just "maxed out" the components ability to do more? Or confused it somehow with namespaces and import statement. At a loss here.
Any insights welcomed.
Thanks.

The SWFloader appears on the screen with a broken link graphic in its place, but it can't seem to "find' the swf. I have tried four different swfs. I even created one with a simple 50-frame animation with no AS that will not load. All these swfs will load in another application, just not this one for some crazy reason. I may have to break down the whole comonent, or do a work around.
Thanks.

.gif files will not load into site

I posted a question earlier about pages not loading and the question was answered, but now my .gif files will not load. Below is the log:
Started: 4/9/2012 2:41 PM
imageshomepage\Announce35.gif - error occurred - An FTP error occurred - cannot put Announce35.gif. Access denied. The file may not exist, or there could be a permission problem.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
imageshomepage\Announce35.gif
Finished: 4/9/2012 2:41 PM
I have them loading into the images folder that is in the htdocs folder.
I stated in my previous question that I am self taught via the adobe DW tutorial. I had a catastrophic computer crash and had to reload everything. I apparently did not tell DW which file to load into before and now that is fixed. Any help would be greatly appreciated.
Thanks

I was never a big fan of using DW to FTP. There are several FTP programs that you might find work better than DW. For example Filezilla, free and works pretty darn well.
http://filezilla-project.org/
For me, being able to graphically see my local site on one half my screen and the site as it sits on the server on the other half of the screen really helps me quickly spot problems if I upload something and it doesn't display.
Anyway... DW is not the only option for loading files to your server.
Best wishes,
Adninjastrator

Webpages will not load correctly on any browser

Hey all,
About 3 weeks ago I took the leap and upgraded my works PC from Windows 8 to 8.1 (as a test before doing the rest). Unfortunately since this time I've been continually encountering a major issue.
This issue is that webpages will not load correctly (about half the time). Since the day I upgraded I've had issues with this, across all browsers. Sometime a webpage will load, sometimes it'll partially load and sometimes it seems to have loaded but actually
hasn't (I.e. none of the links/inputs work). If I have an issue on a page, the only way I can get it to load is to click the stop button, navigate away from the page and then navigate back.
I've tries assessing the problem with Firebug and it seems that the HTTP transfer is being cut-off at a certain point (which is non-consistent). The webpage is then stuck in a state of 'Transferring data' and will never finish loading.
I've been looking around for answers and have come across some suggested solutions like running the All In One fix from tweaking.com, or flushing the DNS cache every few hours, but nothing is working.
Has anyone any suggestions for how I could fix (or even further troubleshoot) this problem?
Thanks
David

Please try a clean boot.
http://support.microsoft.com/kb/929135
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

MacBook Core Duo will not load pages on known working router

I've got the original Core Duo black MacBook running OS 10.6.5 that's having problems with Wi-Fi. It will connect to networks at my school, but at home, it will connect (very slowly) to my Linksys G Router that works with my phone, my iPod touch, and my Early 2008 Aluminum iMac (OS 10.5.8), but it refuses to load web pages in Safari or Firefox, as well as it will not load the iTunes Store. If I turn on Internet Sharing at the iMac, I can use that signal to access the internet. This is not a distance issue as it has worked well in the past and the router is right next to the iMac I am using for Wi-Fi right now. I have had the issue before, but it wouldn't load pages from any Wi-Fi source, so I replaced the AirPort card with a genuine Apple 802.11N card, thus resolving that issue. I have tried resetting the router and the modem, but this has not helped.
Thanks in advance.

Have you checked for firmware updates for the router?
If you connect to the router via Ethernet, can you get to the Internet without issue?
~Lyssa

After I connect an ipod thro a usb cable, firefox will not load, but other browsers work fine.?

Firefox works fine and is my preferred browser, but after I connect an ipod to my computer it will not load. Even after the ipod has been removed firefox will still not load until the pc is restarted.

Open the Windows Task Manager > Processes Tab and see if there is a '''firefox.exe''' process running, when you can't open Firefox and you find it necessary ti restart your PC. When you try to open Firefox and a firefox.exe process is "hung", you should get a warning message that ''' "Firefox is already running" '''.

LT graphics are greyed out and will not load into FCP4.5

Hello All,
We have LT1.2 and FCP4.5 and everytime we create a text graphic in LT we have to render a QT movie or FCP does not see the file when using import file in FCP.
The .ipr files are greyed out and therefore they will not import into FCP.
Thanks for any ideas. I did here one idea about re-installing FCP and LT.
Alex

No. I doubt it has anything to do with sequence settings. That has happened to me on occasion but not for quite a long time. I was able to drag and drop the file into FCP when that happened.
I don't remember it happening since the last update or two.
1shot

ITunes Store will not load. Upgraded, diagnostic is ok, can get radio.

I've upgraded iTunes. I've run the diagnostic and it's ok. I can get the radio stations to play, but the iTunes store will not load. It takes about 3 minutes to "access" and then I get the Apple logo in the yellow top loading bar, and "iTunes Store" in the display area. No other messages. However, when I right click the iTunes icon on my computer (Windows Vista) and run as administrator, I get access to the iTunes store, but my music library has only 15-20 songs in it. Any help would be appreciated.

Hey, I read another discussion with the same issue and did a winstock reset. I thought it didn't work so I got ****** off an shut the computer down with yet another failed solution. When i logged back in it worked. Finally. I've been with out itunes store for over a month.

Tungsten E software Autorun will not load into Vista. Is this common for the T/E software? any way to make the T/E sync with Vista?

null
Post relates to: Tungsten E

Have you tried to browse the CD and start the install using the install.exe. file? You can try this to see if it will install.
If that doesn't work, you can download Palm desktop from the Palm website and see if that will install.
Here is a link to the download for Palm desktop 4.1.4;
http://kb.palm.com/SRVS/NUA/launchKB.asp?c=37014
One question for you, is your version of Vista 64 bit? To find out right click on the computer icon, go to properties and look for the version number of Windows. If you have 64 bit Vista, you will not be able to sync via the usb cable, there are no USB drivers for 64bit Vista.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=tungsten&mn=e&cn=unlocked
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Image will not load into item master

Is anyone aware of any specific issues that would prevent an image from loading into the Item Master. NOTE 952632 just suggests that the file is corrupt but it opens in several image editors so I am relatively convinced that it is not corrupt. It is also not a size issue in that I have larger images loading. It is occurring with a variety of images. I have hundreds that load just fine but some that do not. The permissions and location of all images, those that load and those that do not, are the same.

Editing and changing the name did not have any affect. Converting it to TIF or BMP enabled it to load. Seems odd that it works most of the time but not always. Unfortunate that we will have to have inconsistent image types and we use the same image for multiple purposes but for now, I will change those that don't load, strictly for the purpose of displaying them in SAP.
Thanks for your time Gordon

Trying to create a new playlist but several songs are marked with exclamation mark and will not transfer into playlist - any advice?

I have never had trouble creating playlists before but quite a few songs will not transfer and ate marked at the side with an exclamation mark. I know ZERO about technology so if you can help me in very simple language, I would be very grateful! I am wondering if it may have something to do with the fact that I have had to start new accounts when I have moved countries, on order to be able to use the credit card of the new country in the Itunes store of that country... I am in Aus and have bought a lot of tunes here but last year I was living in Brunei and, in order to use my brunei credit card ( as it was the only one with money in it) , I had to set it up as different to my Aus account. Could this be the issue? prior to Aus my account was in Ireland. I have paid for all these songs but it seems I cannot now use some of them... Please help!!! Thanks in advance for any assistance you can offer, Lisa

The exclamation mark next to a song means it is no longer where iTunes is looking for it. iTunes won't let you add such "missing" songs to a playlist. Possible reasons for a song going missing are that you or some third party software has moved or deleted it, or a folder that contained it, or that the drive it lives on has had a change of drive letter, or a configuration file has changed making iTunes look in a slightly different place from before.
Select one of the songs with an exclamation mark, press CTRL+I to Get Info, say no when prompted to locate it, then note down the location from the Summary tab that begins file://localhost/ - please post back this path as given. Hopefully you can find the file this entry in your library is supposed to be connected to. Assuming you can please post back this path as well. These two items of information may suggest a fix through folder manipulation or a configuration change.
If things have got a little more disorganized then, as long as the tracks still exist to be found, my FindTracks script should be able to reconnect them to iTunes. FindTracks uses some fuzzy matching routines and searches for multiple potential locations. For more details see this thread. Start by selecting the tracks of a single album and then run the script. Your media folder should normally be detected automatically, e.g. as C:\Users\<User>\iTunes\iTunes Media, but you can edit the path if it is wrong or a particular batch of lost files are stored at another path. If it works as expected you can then move on to fixing the rest of the library in bigger batches.
tt2

Artwork will not load into album. Any work around to get it in?

Similar Messages

Maybe you are looking for