ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4.  How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
 type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
 num-packets 3
 timeout 3000
 frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

Similar Messages

  • No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this?

    No matter where I go, as soon as I turn on the Internet on my new Mac Book Pro, everyone else is no longer able to use the Internet. How can I fix this? I received it as a gift for college, but its hard to do research when everyone constantly yells at me to get off because they can no longer continue what they're doing.
    <Edited By Host>

    " how can I sync my iphone to my mac book without losing all the music and pictures on it?"
    You cannot.  Copy everything you want form the old computer to the new one, then sync it.
    it basically says you have to erase your iphone to sync to a new itunes!
    Correct Iphone will sync, or manually manage, with one and only one computer/library at a time. Syncing, or manually managing, to another will indeed erase the current content.

  • I just bought the new ipod touch, but when I try to sync it I get told to use the cloud and download from there.  How do I sync it to my itunes so that I get all my songs without going through cloud? Otherwise if this isn't possible I am taking this back!

    I just bought the new ipod touch, but when I try to sync it I get told to use the cloud and download from there.  How do I sync it to my itunes so that I get all my songs without going through cloud? Otherwise if this isn't possible I am taking this back!

    Thanks for no help... but for anyone else, turn off itunes match on the ipod

  • How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    How do I get Mac OSX 10.6.4 to print to a Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work., How do I get Mac OSX 10.6.4 to print to A Canon iRC2380 colour printer? Using the driver in the Mac's list doesn't work.

    Not sure which driver you mean when you say "the driver in the Mac's list". Apple does not provide a driver for this device, so if you mean one of the default printers that are included with 10.6, like the Generic Postscript or Generic PCL, then these will only work if the optional PS or PCL print kits were installed in the machine. Given your inability to print then it would seem that you have neither kit installed. So this would require you to install the Canon UFR2 driver, which you can obtain via this link.
    With the UFR2 driver installed, you add the printer using IP > LPD. Enter the IP address of the iRC2380, leave the Queue name blank and change the Name to iRC2380. Leave the Location field blank and in the Print Using menu, browse to the "Canon iR C2380/2550 UFR II (UK)". Click OK and then Add to complete the queue creation. You should now be able to print. Please reply if it does not work.

  • How do I turn off the alt scroll zoom?  When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    How do I turn off the alt scroll zoom? 
    When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

    My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

    Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

  • HT4191 My Contacts Journal Professional CRM Journal crashes at the initial seconds of iCloud Migration. Has anybody with this application experience this situation. The developer has been contacted.

    Dear Contacts Journal Support Team,
    Each time i have been trying what you put up for me,i always delete The Application Completely,then go to iTune Apps Store to re-download it. I know the apps store will not give me an old version,that is why i do not use my Mac or iMac to replace the application however this has also been updated on my Macs.
    I reiterated in my message yesterday that,it is not that what you asked me to do is not working or i did not follow your instructions into details. I did follow every steps you stated.
    The end result is that, WHEN IT REACHES DATA MIGRATION,THE SCREEN WILL BE BLACK OR LIGHT BLUE BLACK,WITH A WHITE SCROLLING LINE THREAD ON THE DEVICE SCREEN,MEANING MIGRATION IS ABOUT TO TAKE PLACE. THIS WILL MOVE FOR ABOUT 2 or 3SECONDS,AND IT WILL CRASH.
    I have tried this several time,i do not mind starting all over again,i just want it to work with iCloud. We can give you feedback,and i praise your effort for not getting tired to respond. This is a good and real customer service assistance of which i really appreciate.
    My devices are up-to-date,and the application i download is the latest version.
    Please let's makes this application work,there is non like it on The Apps Store. So you should be proud of your work and your innovation which i see as very powerful as well as extremely useful. But when it becomes unworkable it render all my eulogies to your effort meaningless.
    Thanks for contacting me again and i hope you will make it work again. Please forget about my previous DATA,i want to start it NEW. But you can not turn ON &amp; OFF even the iCloud on Contacts Journal.
    Thanks a LOT.
    The Reverend Canon Dr. IBITOYE.
    Sent from my iPhone 5⃣ Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 13 Feb 2013, at 07:46, Contacts Journal Support <[email protected]> wrote:
    Thanks. Can you confirm this step:
    - make sure all devices are updated to iOS6.1, and running the latest version of the app (3.3) [you can check if you have the latest version of the app by going to the App Store on your device, then checking the Updates section to see if you see any update for CJournal]
    - Another way to check is when you open CJournal, go to More -> Contact Us -> About page -> it should show the current app version.
    This is very important. If you are running the previous version of the app (3.2.1), then this crash will definitely happen on iOS6.1. You need to upgrade the CJournal app to the latest. After updating the app, you will have to follow the same steps as before, including cleaning up the iCloud database.
    Regards.
    On Feb 12, 2013, at 7:13 PM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    Dear Sir / Madame,
    Thanks for your lengthy information which is highly and diligently consummated and extremely digested.
    All what you indicated in your last mail,i have done it and all efforts is TO NO AVAIL.
    1. It does clean all the devices but at the start of MIGRATION,the application crashes away and off. This has happened at least more than 5 to 7 times on one device. I have got main 2 iPhone 5 main lines,the other lines are subsidiary to my European lines and Dublin. So,i do not on or try to set them at the same time.
    2. Please,kindly see it in this way,look at the year you have released this application,i have not made or bombard  you with this kind of problems.
    3. I am an old man,i love the progress of our younger ones in Technology. It is just a shame i was not born to the computer and application age,it pains me. Because i know i embrace and love Technology,even at this old age. So i can not do anything to destroy your work,i will rather support you for progress so my up spring will also progress in all their discipline. Also remember my vocation as a priest,my position is to encourage,correct and not to destroy another persons efforts and labour.
    Above all,i just finished trying it twice now,at the migration point,it crashes out in few seconds when it comes with that line of migration.
    The time in London now is 03:10 in the morning,this is what i suffer on this application: SLEEPLESS NIGHTS.
    If there is any other one like this out their that can take files,journals,documents,ToDo's like this one. Please let me know,i do not mind how much it will cost me. I just want it to work.
    Thanks and look forward to your response.
    Regards,
    The Reverend Canon Dr. IBITOYE.
    Sent from my iPhone 5⃣ Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 13 Feb 2013, at 01:00, Contacts Journal Support <[email protected]> wrote:
    Thanks. We just sent you an email an hour before you sent this one!! It had instructions on how to overcome this particular problem "Cannot sync since another device is syncing at the same time". It doesn't look like you followed those instructions at all.
    This is our detailed feedback, so please read and follow them closely::
    - you can only get this message when you are trying to sync to iCloud with CJournal. It means that something else got stuck while syncing with iCloud before, and it needs you to clean up the iCloud database for CJournal (as previously instructed, and repeated below)
    - there is no hope for us to recover your previous data. The best we can do is to get the app working again with iCloud, by cleaning up your iCloud data for CJournal
    - your old data was previously wiped out when you cleaned up the iCloud database without backing it up. There isn't any chance that we can recover that. Maybe the Apple iCloud engineers can restore that for you (though I doubt it). If they do, then let us know and we can figure something out.
    Meanwhile, follow these instructions for resetting your iCloud data:
    - make sure all devices are updated to iOS6.1, and running the latest version of the app (3.3) [you can check if you have the latest version of the app by going to the App Store on your device, then checking the Updates section to see if you see any update for CJournal]
    - make sure to turn off iCloud sync option in CJournal, on all devices
    - To clean out your iCloud database, you have to go to the Settings app -> iCloud -> Storage and Backup -> Manage Storage -> Documents and Data -> Show All -> look for Contacts Journal. (if you don’t see it, then look for “icloud” with a blank white icon). Here, press the Edit button, then the Delete All button. This will clean out your iCloud database. Note that it will take a few minutes for your data to be deleted from your other devices, and you shouldn’t try syncing any of your devices to iCloud in the meantime.
    - Now restart all your devices by powering them down, then power them back up again.
    - Now, wait 5-10 minutes for the delete to go through
    - On one of your devices, with the latest data, turn on iCloud. If it gives an initial message saying "iCloud data already exists", then press Cancel. It means it hasn't updated from iCloud that you deleted the data. You'll have to open the Settings app and go to the same Show All page again, just so the device tries to connect to iCloud again.  Wait a few minutes before trying to enable iCloud again.
    - After it's done transferring the information to iCloud, wait a few minutes, then connect your 2nd device to iCloud and let it connect with the existing iCloud data. If it gives a message saying "First Time iCloud Sync", then press Cancel.  It means it hasn't detected the data you just uploaded from iCloud yet. Try again in a minute.
    Please follow these instructions closely. Let me know any instruction isn't clear to you.
    Regards.
    On Feb 12, 2013, at 3:57 PM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    Dear Contacts Journal Support,
    I am so disappointed as you have not deem it right to make a follow up enquiry about my problems of which you were aware about all my Troubles.
    I keep you inform of all my efforts with apple iCloud Department and what i was told.
    I did not delete any of my files from Contacts Journal from my iCloud Account as one of my iPhone 4S still contains a 75% of some of my data. This device has been switched off since. Any attempt i made to use iCloud  on contact journal always comes up with a message i have related to you in my former message that: Contacts Journal encounter a SYNC problems from iCloud and that 2 devices can not be Sync at the same time; while all other devices are actually switched off.
    I am sending this Note now as the time limit given to me by iCloud Team will expire tomorrow. As i have said,this application has beautiful features but to make it work and Sync with either iCloud or Dropbox is a problems.
    I mean,about 8 devices can not have these problems at a go while other applications link with either iCloud or Dropbox are working on all these Devices. I can list all these for you if require as apple iCloud Team do check this as well.
    The iCloud restoration you sent me does not work,but i think this has teach me a great lesson as not to rely fully on an application like this anymore. I count my loss,my time and STRESS,i can not but let you know how i feel and my pains,frustrations and disappointments on this application.
    I have been using this application since it has been introduced,i know all the ups and downs,but not like this.
    I hereby appeal to you to sort out this PROBLEMS: "PROBLEM WITH iCloud SYNC: can not sync since another device is syncing at the same time: please wait and try again."
    The iCloud button will not even switched on.
    I look forward to hear from you.
    Regards,
    The Reverend Canon Dr. IBITOYE.
    Sent from my iPhone 5⃣ Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 12 Feb 2013, at 22:00, Contacts Journal Support <[email protected]> wrote:
    You can also go through the iCloud reset process again. That should get everything back in order again with iCloud. But there is no way to restore your old data unfortunately, since the Delete All wiped it out.
    Instructions for resetting your iCloud data:
    - make sure all devices are updated to iOS6.1, and running the latest version of the app (3.3)
    - turn off iCloud sync option in CJournal is it is enabled on any device
    - To clean out your iCloud database, you have to go to the Settings app -> iCloud -> Storage and Backup -> Manage Storage -> Documents and Data -> Show All -> look for Contacts Journal. (if you don’t see it, then look for “icloud” with a blank white icon). Here, press the Edit button, then the Delete All button. This will clean out your iCloud database. Note that it will take a few minutes for your data to be deleted from your other devices, and you shouldn’t try syncing any of your devices to iCloud in the meantime.
    - Now restart all your devices by powering them down, then power them back up again.
    - On your device with the latest data, turn on iCloud. If it gives an initial message saying "iCloud data already exists", then press Cancel. It means it hasn't updated from iCloud that you deleted the data. You'll have to open the Settings app and go to the same Show All page again, just so the device tries to connect to iCloud again.  Wait a few minutes before trying to enable iCloud again.
    - After it's done transferring the information to iCloud, wait a few minutes, then connect your 2nd device to iCloud and let it connect with the existing iCloud data. If it gives a message saying "First Time iCloud Sync", then press Cancel.  It means it hasn't detected the data you just uploaded from iCloud yet. Try again in a minute.
    Hope this helps.
    Regards.
    On Feb 7, 2013, at 7:19 PM, Contacts Journal Support <[email protected]> wrote:
    Hi,
    Regardless of what Apple technicians say, the simple fact is this:
    - you went and did Delete All for your iCloud data ... now all your iCloud data is gone. There's no way to bring it back. We certainly don't have the power to bring it back; maybe Apple technicians do. Have you asked them about this?
    - your only hope is to restore your device using an iCloud backup, from before you did the Delete All. That might restore your data to a previous state. We sent you this link again: http://apple.stackexchange.com/a/75394/11236
    If the Apple technicians can help you through this process, that would be even better.
    There is honestly nothing we can do at this point. There's no bug to fix. The problem is you did a Delete All of your iCloud data, without making a backup first. If you had a backup of your data, we could be able to help you, but that data is nowhere right now.
    Regards.
    On Feb 6, 2013, at 10:23 AM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    No, not at all,The apple Technicians did run series of Test on both my account and The Application. It was conclusive that the application is not communicating both with devices as well as iCloud Proactively,this is one of The Application i personally rated 5 Stars and both iPad and The iPhone ones i have never made any complaint.
    I gain nothing from spoiling another persons Job and effort. But when something needs to be repair,i think it need to. It crashes on my 4 iPads and all my iPhone series.
    Please apple has the conclusion,you are the one who can fix it. Apparently my screen was shared because they can see through all my efforts since last Night.
    I am very DISAPPOINTED... For now i am looking towards your end to get it fix. Apple policy still remains on Third Party's Application.
    Looking forward to hear from you.
    Many Thanks,
    Dr. IBITOYE.
    Sent from my iPhone 5⃣ Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 6 Feb 2013, at 15:58, Contacts Journal Support <[email protected]> wrote:
    Thanks for the update. We would love to fix the problem for you. Unfortunately, since you deleted all the iCloud data without creating a backup first, there's not much we can do from our end. I wish we had some control over this. The best option really is to look for your iCloud backups, and try to restore your data to your iCloud backup. Did you discuss this with the iCloud technicians from Apple? I'm sure nothing was wrong with their iCloud system per se, but did they focus on recovering your data (after you explained the problem to them in detail)?
    At the moment, the only hope we have is to restore one of your devices from an older iCloud backup. You probably want to do this in the next day or so, otherwise it might get lost. This might have been something that I was hoping an Apple technician would be able to walk you through.
    Hope this helps.
    Regards.
    On Feb 6, 2013, at 5:13 AM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    Hello There,
    i have just finished or apple has just finished with me now,and i was opportune to be attended to by one of apple most senior iCloud Engineer or Technician. We were on this problems for couples of hours,apparently they could detect all my logins through out the night on this application. It was concluded that nothing is wrong with my iCloud account neither with iCloud in general as all my other applications is working fine.
    What this implies now is that they i.e. apple engineers refer me back to you as the developer of this application. The application is not communicating with device as well as to have a good Synchronisation with iCloud.
    They asked me to inform you that i have suffered as an elderly man through out the night and up till now nothing can be done from their end. They want you to look into the application and that    it will be monitor from their end for the next couples of Days as if i or others will get all their Documents stored in the iCloud.
    The Senior Technicians might get inn contact with you if there is NO remedy to this gruelling and gruesome situation that this application has put and expose me to since 17:00 Hour yesterday evening.
    I will hereby advocate for an improvement and utmost adjustment to this BEAUTIFUL APPLICATION. I know it can be made to work without any stress and PLEASE DO IT.
    MANY THANKS,
    The Reverend Canon Dr. IBITOYE.
    Sent from my iPad4⃣Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 6 Feb 2013, at 08:23, Contacts Journal Support <[email protected]> wrote:
    Hi,
    At this point, I don't think Time Machine backups would help. The only thing that might be possible is if you are backing up your iPhone or iPad to iCloud. You can check this in the Settings app -> iCloud -> Storage and Backup -> is iCloud Backup turned On? It will also show you the Last Backup under the "Backup Now" button.
    If this is on, you can try to restore one of your devices to this backup version. You can follow these instructions: http://apple.stackexchange.com/a/75394/11236
    You might also want to consult an Apple Genius bar if you have an Apple store close-by or if it's convenient for you to do this over the phone.
    Hope this helps. Really hope you can recover this data.
    Regards.
    On Feb 5, 2013, at 9:07 PM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    Hello,
    Many Thanks,
    apparently i do use i cloud Sync on all my devices,but,i went to the FAQ where it says i should delete the cloud,this is the source of my Problems,apparently i would have contacted you earlier than this as it seems the latest update has been bugged,but i still manage to use it though. As soon as i delete the grey cloud,i lost everything on all my devices,all my 4 iPads,all my iPhones,my last result now is you,i can even taste any sleep as i need this file BADLY.. My last result is if you can put me through either on my Time Machine if that will still be intact. I have browse to see how i can get this work from any source. PLEASE KINDLY HELP...
    My Regards,
    The Reverend Canon Dr. IBITOYE.
    Sent from my iPad4⃣Highly reliable especially when you are on the GOOOOO!!!!! Grab one for your own use,you will never-REGRET HAVING ONE!!!!!
    On 6 Feb 2013, at 03:38, Contacts Journal Support <[email protected]> wrote:
    Hi,
    Thanks for your email. Were you using iCloud sync? When did you upload these missing documents? Do you use multiple devices ... if so, which device did you use to upload the documents? Did you use the "Transfer over WiFi" method, or did you use "Open In" from a different app?
    Let us know and we can see if there's any way we can help.
    Regards.
    On Feb 5, 2013, at 5:14 PM, ADEBAYO ADETOYE ALABA IBITOYE <[email protected]> wrote:
    Dear Contacts Journal Support Team,
    I am sending this mail to let you know that i have been encountering
    serious problems on my CONTACTS JOURNAL FILES for the past 6 to 7
    Hours.
    I have read all the procedure on The FAQ as well as deleting this
    application on all my devices also i tried to go to Manage my Data as
    well as resetting everything stated on the FAQ. But all my efforts is
    to NO AVAIL. I can get all my ToDo's and other Logs. But on my Files
    Section where i some important Documents and folders,it is just coming
    up as loading,and if click any of the files,it will either says ERROR
    or THIS FILE IS EMPTY.
    Contacts Journal is a very good tools for me,but,i must confess that
    as at this Time 01:05 London Time in England,i have been on this
    problems since 17:30 Tuesday the 5th of February 2013. I need to pull
    out a paper i have saved in This Journal to give a Lecture This
    Morning.
    Please i do not want to loose all my files as i have got vital and
    private documents stored and saved on this Application.
    I will be delighted if there is a way of retreating or getting this
    Documents back as they are very vital to me.
    Looking forward to hear from you in earnest.
    My Regards,
    The Reverend Canon Dr. ADEBAYO ADETOYE ALABA IBITOYE.
    St. Alfege Church,
    Church of England,
    Anglican Communion,
    Greater London,
    England,UK.

    adetoye50 wrote:
    Dear Contacts Journal Support Team,
    FYI, this is a user to user support forum.  You are NOT addressing Apple here.
    Honestly, I doubt anyone is really going to take the time to read the novel you have written.

  • I have a Macbook Air with Mountain Lion..I upgraded to the latest version called Mavericks OX now it crashes a lot...when I use the shift key especially I now have version 10.9

    I have a Macbook Air with Mountain Lion..I upgraded to the latest version called mavericks ox now it crashes a lot...when I use the shift and Caps keys especially. I now have version 10.9. how can I get mountain lion back and get rid of this update?

    all of my software was current before i upgraded to maverick....i don't know why this is going on...any help?

  • Just set up iTunes for windows but when I try to sync my iPhone to this it says I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same  library on the windows is blank

    Just set up iTunes for windows but when I try to sync my iPhone to it this is what it says, I have another iTunes library on my power book. It than asks if I want to erase this iPhone and sync with this iTunes library. I used the same password on this windows pc system same log on etc..I don't have anything loaded on it. All I want is for the info that's on the power book in iTunes and my iPhone to snyc/update etc on the windows pc.  How do I do this? My power book is dead to the world. 

    Read here.
    https://discussions.apple.com/message/18565125#18565125

  • I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card.

    I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
    Personal info removed to comply with the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • [svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

    Revision: 16929
    Revision: 16929
    Author:   [email protected]
    Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
    Log Message:
    Add a class that will register the required class aliases in the event the mxml compiler generation  [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
    Add a reference to this class in the RPCClasses file so it always gets loaded.
    QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
    Bugs: Watson bug 2638788
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
    Added Paths:
        flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

    Great exercise to document the problem like this.  It got me thinking about how an app with modules would be different from an app that does not use modules.  Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked.  I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

  • The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting th

    The error message "No more virtual tiles can be allocated" appears when I try to use the effects in the quick editing mode in my Elements 13. The baton OK has to be pressed several times for loading all effect patterns. The error returns when selecting the particular pattern.
    The problem does not appear, if PH Elements 13 is executed in the administrator mode.
    The available computer resources are rather  large enough: CPU INTEL i7 4 cores,  16GB RAM, 1TB HDD + 32GB SSD, Windows 8.1.
    Please, advice how to solve this problem? Maybe, there is patch or updating available?

    Dear n_pane,
    Thank you for the quick answer. In the meantime I found other way to pass by the problem. I increased the cache level up to the maximum value 8.
    The errors reported as "No more virtual tiles can be allocated" vanish, but I still do not understand, why PSE 13 cannot work properly by the lower cache levels, having available maximum resources it needed (10443 MB RAM and 26.53GB SSD space for scratches), or cannot collaborate with the fast SSDs properly.
    I wish you all the best in the New Year 2015!

  • I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??

    I have applied to the iTunes affiliate program and received my affiliate token successfully. However, I want to use the web iMix, however I need a web developer identifier and secret phrase. I can't reach the web i mix affiliate program! Can anyone help??
    You can find the full description here: http://www.apple.com/itunes/affiliates/resources/documentation/itunes-store-web- imix.html
    I have sent an email for weeks now to the e-mail shown here http://www.apple.com/itunes/affiliates/resources/ and haven't had a single response from them. PLEASE HELP!!
    Thank you!

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Maybe you are looking for

  • X10 not connecting to mobile data networks after upgrade to Android 2.3

    My X10 does not connect to GPRS / EDGE / 3G / HSDPA after the upgrade to 2.3. Wifi is no problem, though. I used the SIM card in another X10 with Android 2.1, no problem, got an HSDPA connection. And yes, all the boxes are checked: "Data Enabled" and

  • CFL Not working for one of my UDF

    Hi, I have created one UDT. I have created UDO for it. I also designed the screen in screen painter. In particular form i have created 3 CFL's. i have assigned to three of my UDF's. But only two or working. and another one is not working. I followed

  • App error 606 reset

    I updated by Verizon BB Bold 9650 three days ago to OS 6.  It worked fine until this morning when I turned the phone on and received a 102 error on the phone.  I performed a re-install of the most recent OS6 using BB desktop software.  After installa

  • Download not working.  Annoyed

    I have downloaded, installed and restarted my computer 3 times.  Still getting notification that I have to "download and install the latest version, blah, blah, blah".  I see the program in my control panel.  Still not working.  Help  please.

  • Is this a bug or a "security feature" ?

    I had a nagging bug in coldfusion where every once in a while when people entered text and I inserted it into an MS SQL database it would throw the error "Statement is not allowed." I got a clue when a customer put in the words drop and program in th