Asking for Slideshow Help

I'm having a problem with a slideshow I'm trying to recreate to make some small changes. The original flash video is at the bottom of this page...
http://www.fsip.biz/About.html
I don't have the original .fla file, and I did not create it.
I'm relatively inexperienced with Flash, and I'm at a point where I'm stuck with this. I can do all of the transitions and such, but I'm at a loss for how to do the navigation, i.e. the stops, next/back buttons, and the start slideshow over button.
Should I be setting this file up as a slideshow presentation? If so, do all of the buttons & stops go on the main presentation slide? Any advice as to what actions I should be using for the navigation?
Thank you in advance for any help, I'd really appreciate it.

1.Whats your OLD OS...Version? and the NEW ?
2. OLD OS is 32bit version or 64 bit version? and for the NEW?
2. OLD Raid configuration? and for NEW?
Just three days before we changed a server and the stoHow did you move to the Another server? What method was used to migrate across servers?

Similar Messages

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

How come I'm not asked for password for every app purchase, app auto downloads once I tap install, not good when my kids start buying apps because they are not asked for password, help!!

Thank you for the help, have sorted it through Restrictions in General settings now : )
No more mysterious app purchases on my c.card now thank god !!
You would think they would set as default that Password was required - Imediatly . But they know there likely to get more purchases the way the default set it..
Thanks again for prompt reply!!!

Why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data

why is it ok for a verizon wireless service representative to lie to a customer? I went over my monthly data and i called to ask for some help with the overage because i was barely over. They told me they would take care of it and sold me on a shared data plan that would result in 2gb less data but told me i would save 20$ a month. I agreed and recieved my next statement and to my suprise my bill actually went up 15$ a month and i talked to several people and they all told me there is nothing that can be done to get back on the plan i was on and they can not even give me a discount to get me back to what i was paying. They can only offer me a convenience credit. I will be cancelling service.

ajwest101,
We do not want to see you go. I truly apologize for any misinformation regarding your plan. Let's investigate into this a little further. What plan were you on? What plan were you switched to? If you look at the detailed billing online of your previous bill do you see any additional charges other then the plan?
LindseyT_VZW
Follow us on Twitter @VZWSupport

HT202605 I am asking for your help to unlock an iphone 5

Hello, I live in Ukraine in the city of Lviv. I am writing with hope that you can help me with this matter. I am asking for your help to unlock an phone 5 which I bought from Ebay and did not realize that it was blocked. Now that I paid for it and it is locked, I feel very frustrated and there is nothing much that I can do. It was suppose to be a Christmas gift which was meant to be for my wife. She also feels upset that I haven't checked it when buying. I am kindly asking for your understanding and help to unlock this phone. Info: IMEI ***** serial F2*****TTN I repeatedly wrote to the company Tellus what was the phone to help me unlock the phone but they are not interested! Told apply to private companies silt to you! Help me please!
Sincerely, My contact details *******
<Personal Information Edited by Host>

You've now posted at least three times now and have been given the same answer every time. You've also had your posts editied for personal information every time.
We cannot help you get past the Activation Lock, only the person to whom it is locked can. We cannot help you unlock the phone from a carrier; only the carrier to which it is locked can.

Sir/maam, i am kenneth. i both an ipad for my mom. i register it in icloud. my concern is that wen i restore my mom's ipad, apple is asking for the registered email and password. i forgot those details i put on it that's i decided to ask for your help.

sir/maam, i am kenneth. i both an ipad for my mom. i register it in icloud. my concern is that wen i restore the ipad, apple is asking for the registered email and password. i forgot those details i put on it that's i decided to ask for your help. only thing i remembered is the apple id that i made for her.

Go to http://appleid.apple.com and click 'Find your Apple ID'. Follow the instructions and hopefully you will be able to identify your ID.

I had asked for some help with ICloud 3 weeks ago but no one answered, cloud has my old email and will not let me sign in my Iphone has not backed up in 9 weeks probably same for my iMac cannot even et to my photos. HELP please Sandie P

Had asked for help with iCloud 3 weeks ago. Cloud has my old email and I no longer know the password, wont't let me sign in with new email. When I talked with apple cust service they assured me that everything associated with apple would change over. NO it did not! Cannot find how to get cloud to change this. My Iphone says I have not backed up in 9 weeks because of iCloud. Can anyone help me or give me some advise please
Thank you so very much
Sandie P

Same thing happened to me. My son's iPod touch suddenly started indicating that my "username or PW had changed" or was "incorrect" so I paid Apple $30 to find out that all that was required was updating the software by plugging his iPod into my computer & syncing with iTunes. My problem was then solved.

I never set a restrictions passcode but my ipod is asking for one help?

Can anyone help me? I'm trying to do a reset of all settings but it asks for two passcodes, my normal one to unlock my ipod but then it asks for a second passcode called a restrictions passcode but I never set one.

What do mean by full setting reset?
A few other users has said that they had a Restrictions passcode but they said then never set one. Two possibilites.
- A glitch set one
- Someone got hold of yur iPod when the screen lock was off and added one.

Hi i have asked for this help before and it was fixed but cant remember how to do it My ipad has lost sound in certain apps and general typing i remember fixing it through the settings can any one please help it not the mute

Hi I have had this problem before butr cant remember how to fix it . What has happened is certain apps have no sound where as others do I also have no sound when typing.I remember when i last asked for help with this problem it was done through settings. It not on mute Please help me.

You can enable keyboard sounds via Settings > General > Sounds . If they are enabled but you can't hear them then have you checked that you haven't got notifications muted (which will also affect most apps) ?
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Audigy 2 SPDIF output - again, asking for any help.

Some time ago I asked question about my Audigy 2:
[size="">Hi, I am using Audigy 2 soundcard connected to Altec Lansing ADA885 speakers. These speakers have built-in Dolby Digital Decoder, and of course SPDIF input for this. Additionally, they have inputs for analog front and rear speakers signal. They can be switched to different operation modes : Dolby Digital decoding, Dolby ProLogic decoding, stereo, and quad modes. I have connected them to my Audigy 2 using analog connections, and also digital output. The problem is, that they process both kind of inputs (analog and digital) all the time in most modes simultaneously. For example, when I set them to "quad" mode (for gaming) they process analog signal that Audigy deli'vers them, but also they attempt to decode the signal from digital input. This produces some kind of phase distortions (basses dissappear and the sound becomes slightly muffled). Possible solutions could be : - disable digital decoding in speakers when using analog output from Audigy - this can't be done, these speakers' decoder is not configurable, - disconnect digital cable when using analog output from Audigy - obvious solution, however not very comfortable - disable "ON-DEMAND" spdif output on Audigy card and enable it when necessary. This would be most satisfying option for me. But.... is it possible at all ? Just something similar to the "Digital output only" setting in soundcard panel, but in my case i'd like to have an option of "Analog outputs only". Thanks in advance for any help <img title="Smiley Happy" alt="" src="http://forums.creative.com/i/smilies/6x6_smiley-happy.gif"> Greetings, Martin
No-one answered me, unfortunately
Yesterday I moved to Vista Ultimate and newest set of Creative Drivers.
To my surprise, there is an option of SPDIF output volume and mute in system mixer. However, it also doesn't work.
Can anyone confirm, if I can mute digital output whenever I want ?
Best regards,
Martin

Glad to hear that I'm not the only one experiencing such pain with this card.
After 3 connectors, I have my SPDIF of my Audigy 2 ZS connected to my Recei'ver and passing sound. However, it is NOT passing the 5. AC3/DTS stream. Playing a movie through Media Center 2005, if Dolby Digital 5. is selected, I hear the movie, but the Recei'ver does not indicate it is in Dolby Digital (like when I play it through my standalone DVD Player). When selecting DTS in the Audio Options of the DVD Menu, I hear no sound at all.
I have a minijack to RCA Stereo connector with a Digial Coax cable going from the White connector to my Recei'ver Digital Coax Input.
I have set the Device Decoding Options for SPDIF Passthrough.
What am I missing? This is going on a week now to get something going that worked right out of the box with a $40 DVD Player. And the $40 DVD Player sounds better than this $00 sound card....because it passes the AC3 stream flawlessly.

Asking for a help in writing an algorithm program

I am asking for a program that takes as an input an integer and print out the prime numbers btw 0 and the input integer .
For exemple , if we do input 20 , the program should print out :
2
3
5
7
11
13
17
19

you didn't answer the second important question:
What problems are you running across?
if you really don't want to do any of your own work, you could always take Ade's great suggestion and use Google:
http://www.google.com/search?complete=1&hl=en&q=prime+number+generator+java&btnG=Google+Search

More clear question for slideshow help - Kin?

Hi Kin,
You have been very helpful in getting me this far - I know
this last detail would be a very easy thing for you to do.
I tried to get it to work for the dssmTitle by adding another
dssmTitle.addObserver
http://www.tsgraphics.net/slideshow_test/
The mouseover function is fine the way it is. It's how it
behaves during the slideshow that is a little wierd - it just sits
on the first story. It would be great if it switched to each story
like the small nav at the bottom highlights to each corresponding
nav to its story during the slideshow.
I hope this is more clear.
Thanks!
TS

Hi TS,
So it sounds like you want to change the current row of
dschapters and stop the slide show on mouesover, and then re-enable
the slideshow on mouseout right?
Try something like this:
var gTimerID = 0;
var gInterval = 3000;
function StartSlideShow()
StopSlideShow();
gTimerID = setInterval(function(){
dschapters.setCurrentRowNumber((dschapters.getCurrentRowNumber() +
1) % dschapters.getRowCount()); }, gInterval);
function StopSlideShow()
if (gTimerID)
clearInterval(gTimerID);
gTimerID = 0;
dschapters.addObserver(function(nt,n,d)
if (nt == "onPostLoad")
StartSlideShow();
<div id="nav" spry:detailregion="dschapters"
spry:repeatchildren="dschapters" spry:choose="choose">
<div spry:when="{ds_RowID} == {ds_CurrentRowID}"
id="nav2" class="currentChapter" spry:setrow="dschapters"
spry:hover="hoverRow"><img src="{thPhoto}"
onmouseover="StopSlideShow();
dschapters.setCurrentRow('{ds_RowID}');"
onmouseout="StartSlideShow();" /> </div>
<div spry:default="default" id="nav2"
spry:setrow="dschapters" spry:hover="hoverRow"><img
src="{thPhoto}" onmouseover="StopSlideShow();
dschapters.setCurrentRow('{ds_RowID}')"
onmouseout="StartSlideShow();" /></div>
</div>
On a side note, if you are trying to bring your question to
the top of the forum again, post a message in your original thread
... that is don't create a new thread each time ... that way the
context of your questions is preserved for others to read. If you
post new threads each time, folks have to search for your previous
posts/threads to get context.
Thanks,
--== Kin ==--

Asking for your help to Connect 4 Servers Toghether!

Hi. for more than 3 days i'm trying to build multi server's cast Based on the attached model.
Everything I've tried have not helped me.
can you kindly help me to build the right " vhost " file for each server as described in the attached model ???
I really appreciate it
Thank you very much
Elad.
----- THE VHOST -----
<VirtualHost>
          
          <AliasList>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    <Alias name="alias1"></Alias>
          </AliasList>
          
          
          
          
          
          
          
          <AppsDir>${VHOST.APPSDIR}</AppsDir>







          
          
          <ResourceLimits>
                    
                    
                    <MaxConnections>-1</MaxConnections>
                    
                    
                    <MaxEdgeConnections>-1</MaxEdgeConnections>
                    
                    <MaxAppInstances>15000</MaxAppInstances>
                    
                    <MaxStreams>250000</MaxStreams>
                    
                    <MaxSharedObjects>50000</MaxSharedObjects>
                    
                    <AppInstanceGC>1</AppInstanceGC>
          </ResourceLimits>
          <VirtualKeys>
                    
                    
                    
                    
                    
                    
                    
          </VirtualKeys>
          
          
          
          
          
          
          
          
          
          
          
          
          
          <VirtualDirectory>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    <Streams></Streams>
          </VirtualDirectory>
          
          
          
          <DNSSuffix></DNSSuffix>
          
          
          
          
          
          
          
          
          
          
          <Allow>all</Allow>
          <Proxy>
                    
                    
                    
                    
                    
                    
                    
                    <Mode>local</Mode>
                        
        
        
        
                        <RequestTimeout>2</RequestTimeout>
                    
                    
                    
                    
                    <Anonymous>false</Anonymous>
                    
                    <CacheDir enabled="false" useAppName="true">
                              
                      
                               
                              
                              <Path></Path>
                              
                              
                  
                              
                              <MaxSize>32</MaxSize>
                    </CacheDir>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    <LocalAddress></LocalAddress>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    <RouteTable protocol="rtmp">
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              <RouteEntry>1.1.1.1:1935;2.2.2.2:1935</RouteEntry>
                    </RouteTable>
                    
                    
                    
                    
                    
                    <EdgeAutoDiscovery>
                              
                              
                              <Enabled>true</Enabled>
                              
                              
                              
                              <AllowOverride>true</AllowOverride>
                              
                              
                              
                              
                              <WaitTime>1000</WaitTime>
                    </EdgeAutoDiscovery>
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    
                    <AggregateMessages enabled="true">
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                              
                    </AggregateMessages>
          </Proxy>
          
          <Logging>
                    
                    <Access>
                              
                              
                              
                              
                              
                              
                              
                    </Access>
          </Logging>
</VirtualHost>

You've now posted at least three times now and have been given the same answer every time. You've also had your posts editied for personal information every time.
We cannot help you get past the Activation Lock, only the person to whom it is locked can. We cannot help you unlock the phone from a carrier; only the carrier to which it is locked can.

Failed iPhone sync as iTunes states random song files "could not be read". I politely ask for your help!

Hello
Been having this problem for awhile now:
When I attempt to sync my iPhone, iTunes will start syncing but after every few songs it syncs, iTunes interrupts the sync with a message saying the file could not be imported since it could not be read. I can go to that song iTunes can't import in my list of music and play it in iTunes and verify that it isn't corrupted.
Does anyone know what the issue is? Here is what I have tried so far:
* Restore entire iPhone
* Remove iTunes and all preferences, re install and re import music library
* Change file import settings to iTunes Plus AAC conversion (Not sure this even does anything)
* Manually converting EVERY song (Shift+Clicking) to AAC
* Attempt to sync music manually (e.g. only checked items)
The message is as follows: iTunes could not copy "such and such song" to the iPhone because the file could not be read. This error happens with a different song each time I remove the previous one indefinitely, I have over 3000 songs, and it would take me days before I could manually remove each song iTunes deems unworthy of syncing (if at all). And this ONLY happens if I am fortunate enough for iTunes to even attempt to sync the tracks, usually it just skips that step entirely saying it's been completed, with no music actually transferred...
I am leaving on an international trip soon and I very much want to have hard copies of my music with me, I've been wracking my brain for ages now and haven't been this frustrated since freshmen year of highschool.
(╯°□°）╯︵ ┻━┻
* iPhone 5S - iOS 7.1.1
* Windows 8.1
* iTunes 11.2.2
TL;DR: Everytime I try to sync my songs onto my iPhone, I get an error message that says "iTunes could not copy "(song name)" to the iPhone because the file could not be read or written." and then it stops syncing completely, so the rest of the songs after that don't get put on my iPhone. File is playable and not corrupt.

Hi skyvandyk,
It sounds like one of your music files may have been corrupted at some point and when trying to sync that song the iPhone is unable to do so. I know this must be a frustrating issue for you.
What I would suggest is that you first attempt to sync your iPhone without that particular song. To do this you will need to manually manage the music that goes to your iPhone. This article will tell you how -
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
If the song was purchased from the iTunes store you can delete it and download again at no cost, if it is still available. See this article -
Download past purchases
http://support.apple.com/kb/HT2519
If the song came from a CD or another source you may have to get it again from that source.
Thanks for using Apple Support Communities.
Best,
Brett L

Can`t get Lightroom CC (2015) working - asking for some help ?

Hi.... Dont know if in the wright place, but i`ll try....
(System is MacOS, fully updated Yosemite )
Has had Lightroom(LR) for years as my prefered photo-app, and in payed version (updated to last vers. 5.7).
Beside this, joined the subscription solution "Creative Cloud (vers. 2.0.0.74), nov. 2014....
Know as LR comes in vers. 6 i wanted to use the possibility for the "CreativeCloud" version, so downloaded and installed.....
But starting LR v.6 is not success-full...... presentation-screen flashes shortly, and the app shows up in Dock.... then it all disappears again !!??
Has still my paid LRversion installed.... does function (thanks God !)
Has absolutely had no problem with Creative Cloud, nor PS CC earlier......
So what´s up Doc ? Do i really have to buy the LR again, or....?
Have a huge numbers of pictures make over in LR through the years, don`t really like to uninstall payed version if that should be a matter.....?
Sincerely, Kim, Denmark.

Hi Jim, hi Greule......
Big hugs goes in your directions
That solved the problem, was up`n running in a couple of minutes !
Hope you`ll have a good day - regards Kim, Denmark.

[SOLVED] Asking for initial help on wifi

Hi All,
I am a newby on wifi and trying to setup a wireless internet connection for the very first time. B43 driver got installed and I assume it is working correctly - at least no errors are logged, but I cannot find any 'b43' or 'broadcom' hint in the log files either to confirm success. This was done as per part i of http://wiki.archlinux.org/index.php/Wireless_Setup
As per part ii I am now trying to get wifi working using netcfg2 http://wiki.archlinux.org/index.php/Network_Profiles but failing already on the pre-requisits, "Gather information":
ifconfig shows me 'lo' and 'eth0' interfaces. The same are shown using iwconfig, obviously both without wifi:
[root@limob ~]# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
What happened to my wifi interface?
Appreciate someone can give me a kick-start. No idea how I can get the wifi interface to work.
My config:
Kernel 2.6.24
BCM4312
> hwd -s
Ethernet : MCP65 Ethernet module: forcedeth
Network : BCM4312 802.11a/b/g module: b43-pci-bridge
B43 modules loaded
[root@limob ~]# lsmod | grep b43
b43 108320 0
ssb 29188 1 b43
rfkill 5904 1 b43
pcmcia 32556 2 b43,ssb
mac80211 117132 1 b43
input_polldev 3720 1 b43
pcmcia_core 32664 2 b43,pcmcia
rc.conf
MODULES=(dm-crypt aes-i586 sha256_generic forcedeth b43 ppp-generic snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore powernow-k8)
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.5 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
I know that there must be at least two or three hubs around - I can see them when logged on with Vista, but nothing with Linux (iwscan).
Thanks in advance,
Jochen
Last edited by schimpfj (2008-03-23 08:50:55)

Thanks for the feedback so far, but there was no joy: I have added eth1 and wlan0 manually to rc.conf but just getting errors when re-booting (eth1/wlan0 unknown).
The firmware got installed into /lib/firmware/b43:
[jochen@limob ~]$ sudo ls /lib/firmware/b43
Passwort:
a0g0bsinitvals4.fw a0g1initvals13.fw b0g0initvals4.fw ucode11.fw
a0g0bsinitvals5.fw a0g1initvals5.fw b0g0initvals5.fw ucode13.fw
a0g0initvals4.fw b0g0bsinitvals13.fw lp0bsinitvals13.fw ucode4.fw
a0g0initvals5.fw b0g0bsinitvals4.fw lp0initvals13.fw ucode5.fw
a0g1bsinitvals13.fw b0g0bsinitvals5.fw pcm4.fw
a0g1bsinitvals5.fw b0g0initvals13.fw pcm5.fw
lsmod shows no bcm43xx driver loaded in parallel, hence there should be no interference.
Because ifconfig cannot even identify the wlan I have not event tried to proceed, i.e. use any netconf2 scripts/config.

Asking for Slideshow Help

Similar Messages

Maybe you are looking for