ASSERTION FAILED error while migrating update rules
Hi all,
We are migrating the 3.x datasource for sd - lo cockpit.
Migration steps are as follows...
1. Make a copy of the infosouce. Activate it.
2. Migrate transfer rules. Activate it.
3. Migrate datasource.
4. Migrate Update rules for the respective info providers.
But while migrating update rules ASSERTION_FAILED runtime error occurs.
the assert condition was violated.
CL_RSTRAN_TEMPLATE========CP or CL_RSTRAN_TEMPLATE======CM003
Please help i tried all the means to rectify but none succeds.
It is occuring for each datasource .
Thanks in advance.
aravind
Hello
Assertion statement is like a conditional break point in ABAP. When you are trying to migrate the update rules,it is failing with Assertion statement it means there is some error with your update rules. Either the mapping is wrong or the the target to which it is mapped is in inactive state. Please check these and retry your migration.
Regards,
Krishna Tangudu
Similar Messages
-
Error while activating update rule in Inventory
I was working with migration of datasource 2LIS_03_BF from 3.x to 7.0 in MM module.
Recieved an error while activating update rule 0RT_C17 2LIS_03_BF in Inventory module.
When I checked the routine ,it shows the following error.
Errror:E:The Dictionary structure or table "/BI0/PMAT_SALES" is either not active or does not exist.
I am not usre how to resolve this.
Kindly reply asap.1. Activate the master data infoobject for 0MAT_SALES at info object level of RSA1
2. Replicate and Activate the data source once again by using the program > SE38 : RS_TRANSTRU_ACTIVATE_ALL
3. Then try to migrate you datasource and activate you update rules.
it may help you
Regards.
Rambabu -
Error while migrating business rules
While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
Error while migrating business rules.
Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
Detail:Exception occured. Please check your log file for details.
I am pretty sure I used the inherent format specified for exporting the business rules.
Both the old and new systems are version 11.1.2.
The LCM method also failed for the business rules migration.
Any suggetions?
Thanks,
SujaniWhen you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while transporting update rule.
Hi experts
I am trying to transport one update rule to production..
But it is ending with error code 8 n it is giving me following error :
Errors when activating update rule XXX
IC=0PP_DS03 IS=0CO_OM_OPA_6 error when checking update rules
Kindly tell me what need to be done now.
Regards
SwatiHi Swati,
Before transporting the update rule, in the present scenario, you have to transport the infosource which contains the corresponding "0recordmode".
Whenever you transport anything into the quality or production, the list should be as followed in the given manner :
Seq No Objects in Request
1 Package(DEVC), InfoArea(AREA), Application Component(APCO)
2 Function Modules
3 Keyfigure Catalog(IOBC), Keyfigures(IOBJ), Units(IOBJ)
4 Characteristic Catalog(IOBC), Characteristic Infoobjects(IOBJ)
5 Infosources (ISCS, ISTD, ISMP, ISTS, ISFS, ROUT) and
Generic Data Sources(DataSrce Active Version(OSOA), ISMP, ISTS,DataSourceReplica (ISFS)
and Tables (TABL)
6 Infoproviders(ODS(ODSO), Cube(CUBE), Infoset(ISET))
7 Update Rules(UPDR, ROUT)
8 Infopackages(ISIP)
9 Queries(ELEM)
10 Webtemplates(TMPL, BLTM, BPTM)
Just transport all your things in the above sequence, and it will be done successfully.
Also, remember there should not be any data in the corresponding infoprovider while you transfer the update rule, else it will fail.
Hope it helps,
Regards,
Neha. -
DSO error while creating update rules
Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
PeddintiHi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar -
'L_CHAVL_IN' Error while Activating Update Rules.
Hi All,
when i am tring to activate my update rules, it is giving error, field "L_CHAVL_IN' in unknown. I dont have that field in my objects.
i found that field in 'Progarm' for the update rules. that field is used in the exit of one of the feild in the update rules.
Please give me a solution how to solve this.
Regards,
Ramana.Check the following SAP Note (# 782858)
<b>Symptom</b>
When you activate the update rules, the system issues a syntax error: 'Syntax error: Field "L_CHAVL_IN" is unknown'.
<b>Other terms</b>
Syntax error; generation; l_chavl_in; update rules
<b>Reason and Prerequisites</b>
This is a program error. The error only occurs under the following circumstances:
You generate an optimized update rule;
An alpha conversion is required.
<b>Solution</b>
BW 3.0B
Import Support Package 25 for BW 3.0B (BW3.0B Support Package 25 or SAPKW30B25) into your BW system. The Support Package will be available once note 0723254 with the short text, "SAPBWNews BW3.0B Support Package 25", which describes the Support Package in more detail, is released for customers.
BW 3.10 Content
Import Support Package 19 for BW 3.10 (BW3.10 Support Package 19 or SAPKW31019) into your BW system. The Support Package will be available once note 0723261 with the short text, "SAPBWNews BW 3.1 Content Support Package 19", which describes the Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 10 for BW 3.5 (BW3.50 Support Package 10 or SAPKW35010) into your BW system. The Support Package will be available oncenote 0763336 with the short text, "SAPBWNews BW Support Package 10 NetWeaver'04 stack 10", which describes the Support Package in more detail, is released for customers.
Assign pts if helpful.<b></b> -
Error while transfering update rules
Hi all,
I am trying to transfer business content for 0SRCT_DS1(Contract Management) from D to Q in BW3.5.
Everything went through except for the update rules.
I checked and rechecked if all the infoobjects are active.
But still am getting the following error:
Start of the after-import method for object type R3TR UPDR (Activation Mode)
Update rules CB1GEUI48SB210JQAYD68E74J read in version M
Error when activating update rule CB1GEUI48SB210JQAYD68E74J
Activation of the update rules for 0SRCT_DS1 2LIS_02_SCL
IC=0SRCT_DS1 IS=2LIS_02_SCL error when checking the update rules
any suggestions?Hi ,
Just check whether update rules has any routines or fomula, or constant.
If so collect that in a request and transport it.
Assign points if it is helpful.
Thanks
Shanba -
XD01 assertion failed error while updating customer master data
Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards, -
Error while Transporting Update Rules.
hi xperts,
I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
thanking you,
with regards,
Narendra.Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya -
Getting error while activatinb update rule 2LIS_02_SCL
Hello BW gurus,
I have activated and replicated datasources for PP and activated the 0PUR_C01 infocube now I am activating the update rule 2LIS_02_SCL but while activating the update rule iam getting error message
"Object UPDR CD2NYEJKIIFCCFA9FW1OQRONE could not be found"
which is nothing but the technical name of 2LIS_02_SCL. in GROUPING TAB I have selected " only necessary objects" option.
Any help on this is greatly appreciated can you please suggest me how I can troubleshoot this.
I will assign points to all appropriate answers.
Thank you,
KrishHi Krish
Don't worry about the error message.
RSA1-> Business content-> here select the update rules from 2LIS_02_SCL to cube 0PUR_C01 and with only necessary objects option-> Install update rules with applicable routines. Then refresh RSA1 and check for update rules. If still you don't get update rules, please let me know
Regards
Pradip -
ABAP Runtime error while activating Update rules.
Hi Gurus,
Actually we are in NW 2004's SP9.
While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
"%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
Can any one give correct NOTE number that can fix it or any suggestions.
Thanks in advance.
Thanks
Raju.kHi Sven,
Now we are also in SP11, But the thing is all the other UR are working fine Except
this UR. Even there is no perticular NOTE number for this.
Thanks
Raju.k -
Assert Failer Error while installing the Trial Version
Hi,
I am getting the following error while installing the trail version. any help is greatly appreciated. I am also not able to find XCMDOUT.LOG.
ERROR 2005-01-27 11:59:43 [iaxabactorext.cpp:420]
CIaSdbActorExt::sdbSessionExecute_impl
MDB-07001 No action defined for actor.
ERROR 2005-01-27 11:59:43 [iaxxinscbk.cpp:223]
abortInstallation
CJS-00081 Assertion failed: in
function sdb_inst_enum() {
var actn = "SDB_INST_ENUM";
var call_arr = sdb_action_with_info(actn, "75");
ASSERT(arguments.callee, call_arr != undefined, "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
ASSERT(arguments.callee, call_arr[0] != "false", "ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILE");
var e_arr;
e_arr = new Array();
for (var a_cnt = 1; a_cnt < call_arr.length; a_cnt++) {
e_arr.push(call_arr[a_cnt]);
return e_arr;
ERROR WHILE EXECUTING dbmcli COMMAND! CHECK THE XCMDOUT.LOG FILEHi Lakshmi,
Were you ever able to resolve the problem?
-wael -
Error while copying Update rules from One Cube to other
I am getting the following error message while I was trying to copy an existing update rule from an existing InfoCube to a New InfoCube. Has anyone experienced this before? Please let me know how to resolve this.
Formula 3ZKQ....... (Object version M) could not be read.
The new and original cubes are custom cubes.
Thanks!Hi Vinod,
Check the update rules for the original cube. Are they active? It appears that they contain a formula...check this too.
Hope this helps... -
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
==================================================I don't know what could cause this error.
I would suggest you take this upto [email protected]
Kumar
Ajay Jadhav wrote:
Hi,
I am getting following error while starting WebLogic Server 7.0 for the first
time. Can anybody help me it this?
Error is:
==================================================
Enter username to boot WebLogic server:system
Enter password to boot WebLogic server:
Starting WebLogic Server...
<May 9, 2003 4:27:47 PM IST> <Notice> <Management> <140005> <Loading configurati
on C:\bea\user_projects\mydomain\.\config.xml>
<May 9, 2003 4:28:04 PM IST> <Notice> <Security> <090082> <Security initializing
using realm myrealm.>
<May 9, 2003 4:28:04 PM IST> <Notice> <WebLogicServer> <000327> <Starting WebLogic
Admin Server "myserver" for domain "m
ydomain">
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<May 9, 2003 4:28:14 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to
initialize the server: Fatal initializatio
n exception
Throwable: weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot
intialize Resource Manager Connection Fac
tory resources because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.
UnknownHostException: Unknown protocol: 'JNP'] ]
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Cannot intialize
Resource Manager Connection Factory resour
ces because could not get JNDI context: javax.naming.ServiceUnavailableException
[Root exception is java.net.UnknownHost
Exception: Unknown protocol: 'JNP'] ]
at weblogic.j2ee.RMCFactoryDeployer.<init>(RMCFactoryDeployer.java:50)
at weblogic.j2ee.J2EEService.initialize(J2EEService.java:93)
at weblogic.t3.srvr.ServerLifeCycleList.initialize(ServerLifeCycleList.java:54)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:782)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
================================================== -
Microsoft Visual C++ Runtime Library Assertion Failed error after Adobe update
After the last update of Adobe, I get a Microsoft Visual C++ Runtime Library
Assertion Failed
File: common\npn_gate.cpp
Line: 267
How do I fix this?I followed the instructions from this page:
http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/microsoft-visual-c-r untime-library-error-assertion/b06cb36b-6d13-4aad-9971-6476892767c1
It isolated the problem and it is gone. It took about 1 hour of time to go
through it all, as I had not done anything like this before. I hope this
helps!
Maybe you are looking for
-
Date format in PO printing.
We developed a abap program, I copy the form MEDRUCK to a new form ZMEDRUCK, in ZMEDRUCK, I want to display the PO date and delivery date. All of these date is in format MM/DD/YYYY. Now the buyers want see the delivery date in the format DD.MMM.YYYY,
-
ITAB to PDF without spool request
Hi Experts, I have a requirement where I need to convert internal table data into PDF format and send it as an E-Mail with PDF attachment. How do I achieve this . I dont have any smart form or SCript... In Fact I don't want to use SPOOL.... Is there
-
Hello - First post Every now and again my phone just stops sending email... All appears fine the only reason I realise it is happening is that I get no responses. I check my sent and those messages do not appear. I reboot the phone all works again. R
-
Sync Manager Not Finding Outlook d
I have a 6GB Zen and Outlook 2003. When I access the Sync Manager and it goes through the part where it is searching for music, pictures, videos, contacts and calendar info, the sync manager does not find my Outlook data to sync with. I'm not sure wh
-
HT201505 my guest is not connecting with wifi. it keeps restaring my computer
I have my friend tying to use my computer since i dont want her to us my name shes trying to log with guest but guest kicks me out because it says is not connecting to wifi??????