ASSERTION_FAILED runtime error
Hi,
We are working on BI7.0 and updated the patches just yesterday to Support Package 17.
Today i tried to upload the data we got the short dump ASSERTION_FAILED error.
I checked on SDN , there were suggestion to apply note 998730.
in that we have to delete the data in a table RSTRANRULE with entries *.
what this * means does it mean any value.........?
please suggest.......its really urgent.
Regards
Archana W.
Hello,
Have you done any full and then Init/delta?
What are the loading you have performed before and after SP upgrade?
If you can identify that some request would have caused, you can perform a selective deletion.
if the volume is less better you can go for a new Init / delta.
Thanks
Chandran
Similar Messages
-
Runtime Error during Creation of Asset (AS01)
Hello Everyone !
I have been trying to CREATE ASSET for a long time but unfortunatly land up on ..... RUNTIME ERROR. I used all the possible ways to get it solved but i am stuck. Error analysis says The ASSERT Condition was violated.
Hope you guys would help me out and push my knowledge further. Answers would be highly appreciated.
Srinivas.Hi Srinivas,
I found more information about your issue. These are notes that have been given by SAP in regards to the "ASSERTION_FAILED" runtime error in AS01 or also AS91.
931764 Runtime error ASSERTION_FAILED
989402 Expand/Collapse All events in planning hang t
951191 AA 908, AA 698, AA 475, incorrect ANLC values
932560 ITAB_DUPLICATE_KEY runtime error
971300 AA610 for fixed asset creation, change or recalculation
988238 FAQ New depreciation calculation
949802 AS91: Dump ASSERTION_FAILED in CF_FAA_CFG_TRANSACTION
Please be aware of note 988238 which is a composite note with many erros in FI-AA when in ECC 6.0 It advices to:
"Implement the following notes or import at least Support Package 6 for the components EA-APPL and SAP_APPL (available as of October 2006)."
Check also note 949802.
I hope this helps.
Best Regards,
Vanessa. -
Runtime error assertion_failed
hello,
i am getting a runtime error 'assertion_failed' while activating the transformations.
it says the assert condition was violated. i am attaching the error message here.
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
i need help regarding this.
thanks in advance.
muralikHello MuraliK,
Plz apply note :998730.
U need to check RSTRANRULE table with certain combination and delete inconsistent records.
-- Plz assign points if helpful --
Regards,
Mainak -
Runtime Error : ASSERTION_FAILED while resubmit the SC to create FOD
Hi
We are using SRM 5.00 classic scenario.
When i am clicking on resubmit button to create follow on document getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "CL_BBP_BS_MAP_SC2RQ===========CP" -
in "MAP_DELIVERY_ADDRESS".
The main program was "SAPLBBP_MON_SC ".
In the source code you have the termination point in line 20
of the (Include) program "CL_BBP_BS_MAP_SC2RQ===========CM00J".
Please suggest what should i do ?
Thanks and Regards
Ruma Paul.Hi Ruma,
Please check the following OSS Notes:
Note 1169451 - ASSERTION_FAILED: Shopping stuck in Error in transmission
Note 980296 - ASSERTION_FAILED dump upon resubmitting the shopping cart.
Note 996674 - Check status of shopping cart raise short dump
Note 1027966 - ASSERTION_FAILED dump for shopping cart items in spool
Thanks,
Pradeep -
Runtime Error : ASSERTION_FAILED while clicking on shop button to create SC
Hi Experts.
We are using SRM 7.0
When i am clicking on shop button to create shopping cart getting
RUNTIME ERROR : ASSERTION_FAILED
Termination occurred in the ABAP program "/SAPSRM/CL_CH_WD_GAF_FACTORY==CP" -
in "SET_GAF_PROVIDER".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 29.
Please suggest what should I do ?
Thanks and Regards
Bumhwan ohHi Venkatesh.
Thanks for your reply.
But Note 1341605 has nothing to do with what we are discussing.
My problem is why runtime error result when I click Shop button in Employee Self-Service.
Here is source code in method SET_GAF_PROVIDER.
IF io_fpm_gaf IS NOT BOUND. "SRM 6.0 coding (without FPM)
Get Class Name from explicit configuration (stored in mapped context)
lo_context_node = io_wd_context_node->get_child_node( name = 'CONFIGURATION_NODE' ).
lo_context_element = lo_context_node->get_element( ).
lo_context_element->get_attribute(
EXPORTING
name = `CLASS_NAME`
IMPORTING
value = lv_class_name ).
CATCH SYSTEM-EXCEPTIONS create_object_class_not_found = 4.
CREATE OBJECT lo_gaf_provider
TYPE
(lv_class_name)
EXPORTING
io_wd_context_node = io_wd_context_node.
ENDCATCH.
" Cause: The class specified in the TYPE addition does not exist
" [..] handle exception / abort use case
ASSERT FIELDS 'GAF Provider Class Name is not valid' lv_class_name
CONDITION sy-subrc = 0. -
Dear Experts,
We are Facing a problem with BS_MAT_OVP_03, We have done some enhancements and it is working very much fine in development and when we move it to Quality we are getting runtime errors, they are not with the enhancements but with in standard code itself.
"ASSERTION_FAILED" " ""CL_USMD_ACC_FLD_PROP_DATA=====CP" or "CL_USMD_ACC_FLD_PROP_DATA=====CM009" "VALIDATE_RETURNED_FLD_PROP"
we are getting above runtime error, Please let us know the reason for issue, If some one have come across.
Regards
SukumarHi Sukumar,
It's because of few generated structures could be in "Inactive" mode for your data model when you move to quality system.
Refer each generated structure from SE11 and activate them individually..this can be a post processing activity everytime you move data model structures from one ECC to other ECC.
Thanks
Praveen -
Assertion_falied runtime error is ESS
Hello All ..
I am getting a runtime error assertion_failed when i am clicking on "exit" button in my trips and travel in ESS.
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
it clearly says it is not assigned to any checkpoint so I am not sure how to deactivate it . Below is the code which is generating this dump.
class : cl_fitv_navigation.
method : get_resource_key.
METHOD get_resource_key.
DATA lv_area_key TYPE XSS_SER_AREA.
DATA lv_service_key TYPE xss_ser_resobject.
DATA ls_message TYPE bapiret2.
IF i_operation = gc_op_callareapage.
lv_area_key = cl_wd_runtime_services=>get_url_parameter( gc_param_menuarea ).
CALL FUNCTION 'HRXSS_SER_READTABAR'
EXPORTING
area = lv_area_key
IMPORTING
arlinktype = e_service_type
arlinkressource = e_resource_key
EXCEPTIONS
no_subareas_in_area = 1
area_not_found = 2
OTHERS = 3.
ASSERT sy-subrc = 0.
RETURN.
ENDIF.
Thanks.Did you check for notes yourself?... theres quite a few that match your criteria.
Theres not enough infomation on this thread to help you any further.
Read the "Rules of Engagament"
Regards
Juan -
Depreciation Key - Runtime error
Hi everyone,
In AS02, in depreciation area, I was trying to change depreciation ket assignment. By default it is coming 0000, when I am tring to select some other dep key, it goes into runtime error.
I am getting following message. Please guide me.
Runtime Errors ASSERTION_FAILED
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.Hi,
what is your support package stack for software component EA-APPL?
Have you searched for notes already? You find several ones where this runtime error goes along with the new depreciation calculation functionality as of ECC 6.0.
Regards,
Markus -
Runtime error in starting Lightroom
I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff CulpAha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am -
Runtime error while executing rule
Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type TRFN
Error Location: Object Name 0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID 00034 0000
Error Severity 100
Original Record: Segment 0001
Original Record: Number 557
and Also descripton is :-
Diagnosis
An error occurred while executing a transformation rule:
The exact error message is:
Division by zero
The error was triggered at the following point in the program
GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
Transformation ID
Data record number of the source record
Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas. -
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
RunTime Error while saving a Sales Order
Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
PavanHi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR
hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situat
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the cur
screen.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENT
SourceCde
message e001(zm) WITH text-335 ltab-kunnr text-334.
else.
if ktab-jkunnr <> ltab-kunnr.
ktab-jkunnr = ltab-kunnr.
jobsitecode = ltab-kunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode
IMPORTING
output = jobsitecode.
SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
IF sy-subrc = 0.
ktab-jname1 = kna1-name1.
ktab-jstras = kna1-stras.
ENDIF.
chg_flg = 'X'.
endif.
endif.
else.
message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
* if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
* message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
* endif.
custcode1 = ktab-ckunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = custcode1
IMPORTING
output = custcode1.
jobsitecode1 = ktab-jkunnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = jobsitecode1
IMPORTING
output = jobsitecode1.
SELECT SINGLE * FROM knvp
WHERE kunnr = custcode1
AND vkorg = vbak-vkorg
AND vtweg = vbak-vtweg
AND spart = vbak-spart
AND parvw = 'WE'
Error analysis
The program attempted to issue a " " message during "Exit Command"
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
Trigger Location of Runtime Error
Program SAPMV45A
Include MV45AFZZ
Row 370
Module type (FORM)
Module Name USEREXIT_SAVE_DOCUMENTHi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj -
WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"
Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
Screen: Illegal message
What happened?
The current screen processing action was terminated since a situation
occurred where the application could not continue.
This is probably due to an error in the ABAP program or in the current
screen.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The program attempted to issue a " " message during "Exit Command" processing.
This is an illegal operation.
The program was terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
How to correct the error
The program must be modified to correct the error.
The modification must be made in "Exit Command" processing.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
Source Code Extract
Line SourceCde
1 *---------------------------------------------------------------------*
2 * FORM YVBEP_LESEN *
3 *---------------------------------------------------------------------*
4 * Lesen der Tabelle YVBEP (nicht sortiert) *
5 *---------------------------------------------------------------------*
6 FORM YVBEP_LESEN USING US_POSNR
7 US_ETENR
8 CHANGING CH_TABIX.
9
10 YVBEP = SPACE.
11 YVBEP-MANDT = VBAK-MANDT.
12 YVBEP-VBELN = VBAK-VBELN.
13 YVBEP-POSNR = US_POSNR.
14 YVBEP-ETENR = US_ETENR.
15 READ TABLE YVBEP.
16 IF SY-SUBRC > 0.
17 MESSAGE E506 WITH US_POSNR US_ETENR.
18 ENDIF.
>>>>> CH_TABIX = SY-TABIX.
20
21 ENDFORM.
Could you please help on this issue.
Thanks
SrinuHi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus -
Portal runtime error while selecting page layout in WPC editor
Hello,
in web page composer, editing page, when i click on "select page layout" I have a portal runtime error popup.
The logfile shows the following :
#1.5 #005056834112005E0000000C00000FA800048E28A94966CC#1282205196819#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#1016#149##n/a##7ff9c93eab6811dfa9c70000003307de#SAPEngine_Application_Thread[impl:3]_15##0#0#Error##Java###10:06_19/08/10_0010_3344350
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: E:
usr
sap
EPD
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.netweaver.bc.util
lib
bc.util.public_api.jar(com/sapportals/wcm/WcmException.java):24: class WcmException is public, should be declared in a file named WcmException.java
(source unavailable)
1 error
I have the same by clicking on "check assignments"
Any help ?
ThanksHello Jego.
We faced the same issue after upgrade to EHP1 SP07 last week and managed to solve it by modification of layout.jsp and com.sap.nw.wpc.layoutmanager.LayoutBean within com.sap.nw.wpc.designtime.par. SAP's code requires an additional catch handler, so it is better to rise an OSS message.
As a workaround you may change a default layout for wpc main page (good for new pages) or manually edit output.xml for existing pages.
Best regards,
Aliaksandr Zhukau
Maybe you are looking for
-
Error message FVD_BILL017
Hi experts, I am not very familiar with SD billing domain, i am getting this error message when try to create a billing document. Number range for bill number is missing; enter a number range Message no. FVD_BILL017 For you info the number rnge of th
-
Can't update ipod (windows-mac issue)
My mom got a MacBook on sale so this is now what I use for everything; it is faster and more efficient than the PC that we own. On my iTunes, I can do everything exceptupdate my iPod nano. It simply says "Only Macintosh-formatted iPods can be updated
-
Swatch Library: Windows not opening
Illustrator CS v.11.00 This suddenly started happening only on Pantone solid uncoated and Pantone solid coated - all the others are fine. The window flicks and then nothing......any ideas? I have reinstalled the disc and same problem persists with ne
-
Tabs keep showing that they're loading, but when selected show that they are fully loaded
Here's my problem - happens in Firefox 4 both at home and at my office. When I open the browser some tabs fully complete loading, the others appear fully loaded when selected, however each tab shows the spinning 'loading' icon and says 'loading'. I h
-
Windows % QT 7.7.6: How to associate file types
How do I make certain file types always open with Quicktime? I tried to do it through windows, but I cannot find the Quicktime executable because the QT shortcuts don't list the filepath. I tried to do it through Quicktime control panel and/or prefe