Asset Creation with intermediary Asset Holding Account

Hello Gurus,
We are on ECC6.0 and SRM 7.0 , business requirement is to procure the asset from the P2P cycle and have an Asset Holding account as an intermediary account. And at Month End post the balance from the intermediary account to the main asset account after review.
Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same  and than create the asset and than  transfer the posting from Asset holding account  to the Main asset Account.
Can you please provide inputs how do we address the same.
Thanks & Regards
Rutvij

Hi
I understand about the AUC after checking various threads on SDN.
But i am wondering is my requirement addressed
'Business has clear requirement to have the all posting first going from the P2P cycle to a Asset Holding account( intermediary account) and at month end review the same and than create the asset and than transfer the posting from Asset holding account to the Main asset Account"
So if we go with AUC , we need to create a asset number before the procurement process starts.
At the completion of the AUC once the asset is settled, for the new asset  procurement business will have to create a new AUC asset number.
Hope I am able to help you in understanding the requirement.
Any inputs in this regard are helpful
Thanks & Regards
Rutvij

Similar Messages

  • Creation of Asset APC account

    Hi
    Please let me know how to create an Asset APC account with cost element category 90. Since its a balance sheet account, it does not allow me to create the cost element.
    Please guide me how create the Asset APC account with cost element category 90
    Thanks

    Hi,
    It must be created using KA01 followed by message "Account is balance sheet account: cost elemen category is defined" > Enter to continue as this is only information message.
    Hope it helps.
    Kind regards,
    John Chin

  • Asset Reconciliation Account

    Hello Experts-
    I fell in a tricky situation at my work place. We have an asset reconciliation account which has a balance but, this balance does not correspond to any asset. When SAP Fixed assets was implemented here, they had a balance for this account and then have converted it into a reconciliation account. How do I create an asset which represents that balance as APC value? Or how would I transfer it from this reconciliation account to a clearing account so that I can create a real asset and transfer this APC to a real asset?
    Any thoughts on this issue would be really appreciated.
    Thanks in advance.
    RNarayan

    Hi,
    To post the balance values from the take over values from AS91 on the Asset Reconciliation Account
    You can use transaction:
    OASV
    ABFI (use transaction type 100 and don't fill in an asset number)
    The postings on these account are total postings by bussines area and there is no 1:1 relation with assets like with debtors and credititors. (when you run the depreciation it create total amounts

  • How to post externally to asset reconciliation account

    Hi,
    I need to post one entry externally to asset reconciliation account & I dont want to update asset due to that entry. How to do that?
    Pl. help. I will award points for suitable answer.
    Thanks
    Veena

    You are permitted to post the recon account undercertain special circumstances :
    USe the transaction codes OAMK and OASV.
    Kindly read the SAP on line documentation before making a postings directly to the recon account.
    Definition of the Reconciliation Accounts
    You are not allowed to manually post to the reconciliation accounts for Asset Accounting in Financial Accounting. Normally, you designate the corresponding General Ledger accounts in Financial Accounting as reconciliation accounts. This change, however, can no longer be made in Financial Accounting, once these accounts already have balances from the legacy data transfer. However, you can use a special report to assign these accounts the status of reconciliation accounts in Financial Accounting (in Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Set Reconciliation Accounts).
    There is another report for removing this specification (Reset Reconciliation Accounts).
    Subsequent Correction Postings to Reconciliation Accounts
    Suppose you have already defined the asset G/L accounts in Financial Accounting as reconciliation accounts, but still need to transfer balances to these accounts, or make corrections. You can make correction postings to these reconciliation accounts with a special posting transaction in Customizing for Asset Accounting (Transfer Balances), using posting key 40 or 50. You can only postings to those accounts in a company code with implementation status (Customizing for Asset Accounting, choose Preparing for Production Startup ® Production Startup ® Activate Company Code).

  • Asset Cost not transferred from Asset Clearing to Asset Cost Account

    Hi,
    There has been a manual Asset-123 added for which the asset cost has not been transferred from the Asset Clearing to Asset Cost Account.
    While, the other additions done for other entities have been transferred successfully.
    Im trying to figure what could be the issue..
    Thanks in advance.
    Edited by: user645075 on Sep 1, 2008 12:27 PM

    Hi Shrutika
    It appears as is if there is some issue with the configuration of your GL / configuration of GL with AA. Please refer to the following [link|https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting]  on this site. This provides you excellent stuff on Asset Accounting.
    Regards
    Virendra Malik

  • Asset clearing account

    hi,
    when post to asset module from fi, must use asset clearing account right? not able to directly post to asset without clearing account. is that correct?
    what tcode or in spro i can see the asset clearing account being defined.
    thanks

    Hi,
    In SAP Asset Accounting is a Sub Ledger concept i.e we do not disclose each and every asset in the balance sheet.
    Instead we create GL accounts for each particular asset like Building, Plant & Machinery,Furniture etc. and these are assigned to the Asset Class.
    These Gl accounts are defined as Recon Accounts, so that the Total Balance in the Gl account reconciles with the Sum total of all the Individual Asset that fall under that particular asset class.
    When an asset is acquired then we enter the value directly into the Asset Master data,but as the Asset is linked to a Asset Class, the data is also entered in the GL account that is being assigned to it.
    Similarly we also assign the Accumulated Depreciaiton and the Depreciaiton Gl accounts to the asset class for the flow of depreciaiton vales.Depreciaiton Gl is defined *** a P & L account anad Accumulated Depreciaiton Acct is defined as balance sheet account. Data flows into these gl's when we calculate the depreciaiton.
    Hope I have provide the information required by you.
    Regards
    Phani

  • APC Posting to Assets Reconciliation Account

    Hi Experts,
    We are currently working with AS91 and AS94 legcay data Transfer. The acquisition is completed, we gave acquisition values in Dep Area 01 (Book Depreciation Area), Do we also need to reset the Assets reconciliation account and post the APC values to them? Or the 01 acquistion values will automatically post to Assets reconciliation accounts and how?
    What is to be done?
    Please guide.
    Best Regards
    VK

    Thanks Krishna,
    OASV does not provide the option of document and local curreny. We would like to force the values from Local currency to group currency disregarding the exchange rates.
    So after restetting the reconciliation account we will post using F-02.
    Any negative impact?
    Best Regards
    VK

  • Vendor Reconciliation & Asset Reconciliation Account

    Dears
    I am a little confused regarding the reconciliation accounts.
    We are making for Asset Config settings for down payment posting.  I selected downpayment account for Asset Downpayment in AO90; but the system says the GL is not a reconciliation account.
    When I saw the GL account, it is created as a Vendor Reconciliation account.
    But in AO90 I think, we should give an Asset Reconciliation Account, right ?
    If that is the case, why we should have separate reconciliation account for Vendor and Asset in Downpayment posting for Assets ?
    When we post the Vendor Downpayment in F-48 using Spl. GL indicator 'A' , we are assigning the PO number also where asset is linked.
    Spl-GL 'A' is linked to a reconciliation account for vendor.
    Asset downpayment is also linked to a reconciliation account for asset.
    If that is the case, which downpayment account, the advance amount for asset is posted ?

    Hi Niki
    I personally dont like updating the Down Payments for assets in Asset Accounting.. It is inviting troubles w/o much of value-add.. If you post DP to asset, then Invoice and you dont clear the DP, the depreciation is calculated on Invoice amount + DP Amount
    Ofcourse, it gets adjusted in future depreciation runs once you clear DP. But if you clear in subsequent FY, then thats a problem
    In order to avoid updating DP in AA, follow the below steps
    1. Create a new FSG as a copy of G067 in which you will suppress the Asset Number
    2. Assign this FSG in Vendor recon accounts
    3. Do F-47 and enter the PO Number..
    4. System will give an error msg F5 378..
    5. Suppress it in OBA5, and you are done..
    I remember this till date because this was one of my initial findings / learnings in my SAP Career ;-)
    Best Regards
    Ajay M

  • WBS Element Populated on Asset GL Account Line Ledger 90

    Hello All,
    For preliminay settlement of a WBS element to an AuC asset, how do you get the WBS element to populate on the account line for the asset gl account in ledger 90?
    Currently, I'm working in R/3 4.7 and the WBS populates on both sides of the accounting document (on the asset line as well as the settlement line). We are upgrading to ECC6 and this does not work the same. The WBS element is blank on the asset line. I cannot remember how the R/3 4.7 system was configured in order for the asset line to mirror the WBS element on the settlement line. If I can understand how it works in R/3, then maybe I can get it to function the same in the upgrade.
    Any assistance would be greatly appreciated.
    Thanks.

    Hi
    When the WBS element is settled to the Asset, ideally the balance in the WBS element would have become Zero. Then there is no question of calculation of Interest on WBS element. You can change the status of the WBS element to TECO or CLSD if you dont want to use the same WBS element further.
    Regards,
    Lakshmanan Krishnan

  • Asset Sub Account No. in FBL3N Report

    Dear All,
    As of my client requires to display Asset Sub Account No. in FBL3N Report. Can it possible to display the same in FBL3N report?
    If it is possible let me know how to display?
    Regards,
    Mohan.

    Hi Murali,
    I have created nearly 25 Sub Account for main assets.....
    Once i am doing the settings for Asset sub Account No. in O7R3 t.code, in the screen layout the Asset Sub Account No. (BSEG-ANLN2) is coming.....
    Now is it working fine.
    Regards,
    Mohan.
    Edited by: Mohan on Jun 22, 2010 12:44 PM
    Edited by: Mohan on Jul 14, 2010 4:01 PM

  • Tax Category Indicator on Asset Reconciliation Accounts

    Does setting the tax indicator flag to '*' have any affect on reconciliation postings to an Asset Reconciliation account?

    Hi,
    Generally tax indicator "-" (Only input tax allowed) is set in Asset Reconciliation accounts.
    Setting * for the same will also suffice.
    The tax indicator setting is required as the asset acqusition process is done through asset purchase in MM. for that purpose the  input taxes will be calculated.
    I hope this answers your query.
    Regards,
    Ashutosh

  • What is asset reconciliation account.

    What is asset reconciliation account. Is this like other reconciliation accounts like A/P and A/R. How can we use it.

    Hi
    GL for Asset as Reconciliation is defined in FS00
    Account determination rule is defined under SPRO - FAg - AAg - Org structures - Asset classes
    The A/c determination is included in the Asset class
    In AO90 GL a/c is assigned to Account determination rule
    Finally, Asset master is created under a Asset class thru AS01
    Thank You,

  • Assigning Asset Reconciliation Account

    Hi Guys,
    Where do we assign the Asset Reconciliation Account to an Asset?
    Does it flow from the Asset Class? IF so..Where do we assign this GL account..
    Thanks,
    Kris..

    Hi,
    Asset reconcillation account  is determined based on the accoun determination assigned to the asset class and baed on the account determinaton the reconcillation account is being identified

  • Deactivate manual PR creation with account assignment "N"

    Hi experts,
    How to Deactivate the manual PR creation with account assignment "N" in ME51N ,as these PR with account assignment "N" is to be made from CJ20N Tcode.
    Kindly help..
    Thanks

    Hi,
    The above proposed solution is not working.Kindly let me know if can be done through any development.If so,please tell me the USER EXIT for this requirement..
    There is no way through configuration changes to block the manual creation of PR for account assignment "N"
    Thanks
    Edited by: ARITRA MUKHERJEE on Sep 4, 2010 10:13 AM

  • Asset GL accounts not getting picked up in ABST2 run

    Hi,
    There are few asset GL accounts i.e APC and AccDep accounts which are not getting picked up in ABST2 run. What could be the reason? Please advise as to how can we ensure that we get a spool of all the GL accounts post ABST2 run.
    Thanks,
    DP

    Are the missing GL accounts set up as asset reconciliation accounts go to FS03, enter GL account number, and go to control data tab, field recon account for account type should be A for Assets.
    Thanks,
    Tammy

Maybe you are looking for