Asset field blank in FS10N (Drilldown to line item level) report layout

Hi all,
i ahve posted a Retirement transaction to an asset and when i went to see the line item on the GL using/executing report FS10N for asset transactions GL and drill down to the line item level by double clicking on the period balances and I choose field "Asset" to be displayed in the layout, it is blank. How can I get report FS10N to display the asset number from the transaction?
the field is available in the layout but when i pull it into the report it is Blank in the report.
Any help would be appreciated. Thanks
Jay

Hello,
FS10N shows only balance, FBL3N shows the line details.
Add the asset as a special field via OBVU  (Table:  BSEG, Field: ANLN1).
Regards
Waza

Similar Messages

  • Amount field to be non editable at line item level in MIRO

    Hi,
    Plz let me know the steps, how to make the "Amount" field at line item level to be non editable in Invoive verification (MIRO).
    Regards,

    Create a screen variant for MIRO and make DRSEG-WRBTR filed output only.
    Program: SAPLMR1M
    Screen no : 6000

  • Add field(Text-Field) in SAP Adobe form (SFP) @ line item level

    Hi All,
    I have copied SAP Standard Travel Request Form (FITP_REQUEST_FORM), and modifying it according to client's requirement.
    The requirement is to display Comments field
    I need to display some more details under Travel Itinerary & Services
    Eg: Comments field for > Outbound Train , Outbound Flight etc.
    The problem I am facing is unable to filter data in Node Request > Data > Car, Flight, Train, Hotel and others.
    I have added text field in the Car node but its not retiveing data related to Car Comments its showing for Flight.
    Regards,
    Shree Wadekar
    Useful answers will be rewarded

    Solved by my own

  • Asset number at the line item level

    Hello,
    to a recent client I have 2 depreciation areas - the first one is the statutory one and the second one is for the group. I have different accounts for each depreciation area and at the level of the first one the accounts are asset reconciliation accounts and for the second one the accounts are GL accounts.
    All the postings (depreciation, retirements) are made correctly in both depreciation areas except the fact that at the level of the second depreciation area (with GL accounts) the asset number is missing at the line item level.The field status group is the same for the accounts involved.
    Please, can somebody advice?
    Thank you very much,
    Claudiu

    Hi Mark,
    thanks for answering me and trying to help me. Regarding your questions - the posting on the second GL account are line by line, this landscape don't work with group of assets. This field ANLN1 is empty for this depreciation area, like I said the values are correct in asset explorer but in Fi for report reason the field is not available - that's my problem
    Hope that I was more clear this time.
    Thanks and hear you soon!
    Claudiu

  • In report painter report, line item level drilldown report requirment

    Dear All,
    I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
    Please sugget anyone, where I am doing mistake in report creation level.
    Thanks
    M Srinivasa reddy
    Ph : 9637399076

    Thank you,
    I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
    Thanks
    M Srinivasa reddy

  • Which table for the field "Net due date" of customer line items?

    Hi All,
    In which table could I find the field "Net due date" of customer line items?
    Thanks
    Gandalf

    I don't think there is a field for that.  In various SAP screens where you see this field, I think it is a calculated value (baseline date ZFBDT + days ZBD*T).

  • Problem with cents:"G/L Account Bal. Display (FS10N)  vs. Line Item Display

    Dear colleagues,
    We have used BSIS table within a batch input program using standard transactions such as F-02 and OASV, in order to leave several "old" G/L accounts completely up to zero, and therefore transferring their complete amount to "new" G/L accounts.
    What we see in several "old" accounts after doing the transfer is that system still displays me 1, 2 or 3 cents in transaction FS10N......but if I double click for its G/L account line item display, system correctly tells me that the old g/l account is completely balanced. Logically, for I have checked in BSIS table through program which is the necessary amount to balance the old g/l account.
    So we can say there is a lack of coordination between what I see in the first screen of FS10N and the Line Item display screen of the g/l account. No doubt, old account is completely balanced and well transferred to new g/l account (checked in BSIS table), but FS10N still reports few cents.........isn´t it somehow mischievous?
    Does anyone know how to clean those cents (which actually are virtual cents)? Is there any sap note reporting this bug and providing the solution?
    Thank you so much for your kind attention on reading my post and best regards.
    F. Albisu

    Dear Neeraj,
    Yes you are right, there a lots of notes related to this issue.
    I have found note 595776 which I think best fit with my problem. Would you hindly read it and confirm to me, from your point of view, I am in the correct track?
    (Of course, the system I am talking to you abput, proceeded to the Euro Conversion in 2002)
    Thanks!

  • Query : Custom field at line item level in SRM 7.0 .

    I was going through a document which instructs on how to add a custom field at line item level in SRM 7.0.
    I found this code :
    CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
    I_GUID = IV_DOC_GUID
    I_WITH_ITEMDATA = 'X'
    TABLES
    E_ITEM = LT_ITEM
    E_MESSAGES = LT_MESSAGES
    E_STATUS = LT_STATUS. . 
    LOOP AT LT_STATUS INTO WA_STATUS.
    IF WA_STATUS-STAT EQ 'I1015' AND WA_STATUS-INACT IS INITIAL.
    LV_STATUS_APPROVE = 'X'.
    ENDIF.
    ENDLOOP.
    I wanted to know what is 'I1015'  and what is its significance .
    please advise .
    Ambar

    HI
    This speaks about the status of the Cart. This means that the Status of the Cart is AWAITING APPROVAL...I dont know which document you have gone through but procedure for adding a Custom Field in SRM 7.0 is:
    1. Create a Custom field in the Database in SRM. Preferrably add the field in an include and extend thta include to the table in SE11.
    2. Go to Portal Login of SRM and right click the part of the screen where you want to add the custom field. Click on More Field Help. The popup will give you the name of WebDynpro Applicaiton which controls that area.
    3. Login to SRM via GUI and display the webdynpro application using SE80. Enhance the Webdynpro application.
    4. Add the custom field to the Context of the WebDynpro Application View. You will be selecting the field from the database table while adding the custom field to the context
    5. Add the field at the specified place in Layout Tab of the WebDynpro View,
    6. Create a binding between the Layout Field and the Context
    7. Activate the changes.... you will see the field in Portal login of SRM....
    For more details , refer to the Webdynpro help of the application...
    Regards
    Virender Singh

  • How to control Payment Block field at line item level

    Hi Experts,
    Could anyone please let me know how to control payment block and payment method fields at line item level.
    I have checked field status at posting key (OB41) and GL (OB14) level but didn’t get any parameter to control these fields.
    I need your expert guidance.
    Regards,
    Mohammed Kalim

    Hi Mohammed,
    Please go to OB24/
    Select * (for all co.codes) default field status.Or Create new entry and input your co.code, Save it. Come back to co.code.
    Go to payment transaction
    Payment block and payment method display can be controlled from here for vendor master data
    Thanks and good luck.
    Regards,
    Sam

  • F4 Help in Personnel no field  at line item level

    Dear All
    I made personnel no field  mandatory at line item level. i want f4 help options at that field ,presently its not coming.
    advise on same.
    Jain

    Hi,
    Check with ABAPer for enabling Search help.
    Regards,
    Sridevi

  • Customized drill-down report cannot go to line item level (FGI4 and FGI1)

    Hi Expert,
    I created a customized drill-down report using New GL features, as follows:
    FGI4 create form, with reference to form: 0SAPBLNCE-01
    FGI1 create report for the form created.
    After that I set some things like characteristic, variables, and output type.
    When I execute the report, the data shown cannot be drill-down to line item level:
    Goto > Line Item (this function is disabled).
    Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
    Thanks
    sbmel

    Hi sbmel,
    For calling up a line item report in a drill down report you need to make the below settins:-
    - You first have to generate the line item report with program RGRGENSI for your summary table.
    - Then assign the generated line item report to the summary report.
               Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
                In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
    Regards,
    Gaurav
    Edited by: gka2707 on Jul 19, 2010 8:07 AM

  • Substitution and activated the same at the line item level in order to subs

    I have created a substitution and activated the same at the line item level in order to substitute the ZRSPL (Payment Block) field by a constant value and a vendor invoice is posted using Transaction FB60. But the same is not working. When I post a vendor invoice using FB60, Payment Block field is being shown as blank instead of the constant value which I want to substitute.
    >
    > My prerequsite is mentioned below :
    > BKPF-TCODE = 'FB60' AND BKPF-BUKRS = 'ABC' AND ( BKPF-BLART = 'KR' OR
    > BKPF-BLART = 'KY' ) AND BSEG-DMBTR > '10000'

    Hi,
    I am not understanding the logic behind the prerequisites mentioned in your query.
    Payment block field exists only for vendor related line item.  However, you have not mentioned vendor reconciliation account in the prerequisites.  It means, this substitution will trigger for all the line items which is wrong.
    Or try following  options.....
    1) Substitution->Simulation
    2) Extras->Expert Trace
    Best Regards,
    Madhu

  • Custom filed at line item level in order.jsp

    Hi,
    I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
    similar to the below mentioned Standard functionality:-
    In order.jsp when we enter a valid item no in the item text box
    and press enter then the related data of the item is populated in order.jsp.
    Is this possible ??
    If yes please let me know how can we achiese this.

    Satish,
    the problem with product search is that ....
    custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
    so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
    but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
    can you tell me how is the item search done when we enter the item number and press enter?
    please suggest

  • Fixed Value Date at line item level is not in changable mode when copied

    Dear SDN Team,
    Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
    The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010).  In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
    But i would like to have the fixed value date in the return order as 10.03.2010  but the field is greyed out.
    But normally when the sales document is created with reference to the preceding document the same will be copied.  But field is greyed out and it is not in changable mode.
    Can any one help how to solve this.
    I have checked also SAP Note where i did not find any messages.
    In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
    Pleas help me to resolve this.
    With Regards,
    Jai

    Hi Lakshmipathi,
    I am sharing the resolution which was done to this requirement.
    We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
    Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document.  Once this is done.
    We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
    Thanks and Regards,
    Jana

  • WHT (Witholding Tax / TDS) at PO line item level

    Hi
    There is one new functionality in SAP where i can enter WHT (Witholding Tax / TDS) at PO line item level. This functionality is introduced by SAP.
    I searched PO line item for WHT code field in PO. But i didn't got this field. Please let me know how can i activate WHT field in PO line item level itself.
    We are on SAP EHP5.

    Dear Deepak,
    WHT is basically add in vendor when you are creating. Goto XK03 select he WHT view.
    for more information please check following URL
    http://sapdocs.info/sap/fico/sap-extended-withholding-tax-configuration/
    Regards,
    PK.

Maybe you are looking for