Asset Fiscal Year End Closing - Depreciation not posted completely in 2010

Hi Experts,
I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year.
This happened because of the following situation:
Vendor Incoice was posted in 30.12.2010, with a document date 31.03.2010 (meaning that for this asset the depreciation calculation start date was 01.03.2010). Then, in 30.03.2011 someone post the reversal document, with posting date 31.12.2010.
So for this asset I donu2019t have any depreciation posted in 2011 and no values in depreciation book, for the asset, meaning that even if I change the depreciation calculation start date for 01.01.2011, it will still be necessary to run depreciation in Dec.2010.
However I cannot run depreciation for this asset for 2010 because it will have impact in 2010 balance sheet, which cannot happen.
Do you have any ideas to solve this problem?
Thanks!
Best regards,
Andreia Nascimento

Hi,
As i have already suggested you for the [SIMILAR THREAD|Re: Asset Fiscal Year Closing not possible], which you have only posted in FI forum, there is no other alternative than running the repeat dep run for FY 2010 for period 12.
Please do not cross post your questions.
REgards,
Srinu

Similar Messages

AFAB-Depreciation not posted completely - URGENT

Hi All,
I tried to execute AFAB and i got an error for 69 assets saying that "depreciation not posted completely". So i tried to repeat run the depreciation and only out of 69 only one asset is only coming into the screen while doing test run. Can any one tell me how to overcome this issue.
I am getting an error - the message is 'Last posting run terminated (Restart in period 2008 012)'
Thanks in advance
Sri

Hii
U getting this message means when u run depreciation run due to some reason it was terminated and the run was not carried out completely... so due to this basic reason it showing this ,,,,,
for this u need not to do repeat run instead u need to do restart. the option below the repeat run..
Repeat run is used when some additions or adjusments are there after the depreciation run is completed sucessfully...
but in your case i think it was terminated before it was completed sucess fully
so go to AFABN and run restart
i think this will solve ur problem
thanks
sejal

Regarding AJAB Asset accounting year end closing.

Dear All,
We need to close the Period end closing for the Year 2008. When I am executing AJAB i had found that F Y 2007 is not yet closed in Asset Accounting.
I am just wondering how should I proceed? If I want to close 2008 I should compulsorily close 2007. What happens if i close 2007 now? I tried to close in our test server and there are various errors being popped up?
Any gnan on how to proceed? What happens if I don't execute AJAB?
Regards,
Sri.

Hi,
Actually i also faced a similar issue and i had wriiten to SAP for a solution.Actaully its the Table T093B where we can see the closed fiscal year that has to be updated with closed Fiscal Year as 2008 for the particular Company Code.
We had to execute the program for all deprecation areas.
Regards
Rahul

Asset accounting year end closing.

hi guru,r
i have one issue with asset account fiscal year clsoing. when we run the AJAB,it was throwing error, saying that one of the asset is not posted depreciation completely.
for this message there is an asset which was disposed off in period 12 2007 after the Dec'07 depreciation run.
To correct it repeat the depreciation run in period 12 2006 or adjust in period 13 of the previous Fiscal Year.
advise me as early as possible
value points assigned
regards
nandini

Hi Nandini gaaru
Pls send me screen shot and what is error and explain me
[email protected]
or u add me
[email protected] (in g-talk)
regards
Mallikarjuna
vuntaa maree

Post to Asset ( f-90)--Fiscal year already closed--

Hi SAP Gurus,
The below error is coming while posting the asset purchase (F-90), with back date & also if I am giving current year date giving the same error
Error :
You cannot post to this asset (Fiscal year already closed)
Diagnosis
The fiscal year 2007 is already closed for area 01 in company code xxxx.
Procedure
Check the depreciation area specifications in Customizing. If the specifications are correct, use a transaction type that does not post to the depreciation area mentioned above.
Thank you,
Ramakanth

Hi Sunoj,
Were Do we do that customization...?
is it in Periodic Control method
Can you please help me
Thanks
Ramakanth

Asset year end closing issue

Hi, I run ajab to close year 2010 (not 2011)and encounter below issue:
Asset 004110000555-0000 in company code 0000 (depreciation incomplete)
Message no. AU070
Diagnosis
The planned depreciation was not completely posted to Financial Accounting for asset 004110000555-0000 in company code IN00 in depreciation area 90.
System Response
Year-end closing cannot be carried out for company code IN00.
Procedure
Post the depreciaton using the appropriate posting program (Periodic processing) in Financial Accounting. Then start a repeat run for this asset, if necessary
My depreciation area 90 is "Post assets periodically in General Ledger", what should I do?

Hi
Is depreciation fully posted for the year 2010. Try to run AFAB in repeat mode for the last period of 2010 in test run to see if any values are coming for posting.
If depreciation values exist, then same needs to be posted before you close the Asset fiscal year.
Also please note for posting the depreciation your Fiscal year and period should be open in accounting.
Regards
Malathi

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

Year-End Closing Asset Account - AJAB

Hi,
While executing year end closing for fiscal year 2005, system gives following error message :-
"Depreciation not posted completely"
Since, there is unposted planned depreciation in period 12 / 2005, system is not allowing to close the year.
But since the financial year 2005 has already been closed, we can not open it back due to other legal issues and financial impacts, user wants to have any other work around solution to close the year 2005 without posting the depreciation.
Please send us your ideas or expert comments.
Thanking you in advance.
Thank You & Best Regards,
Naresh B. Pandya

Hi,
At last we opened FI Year 2005.
We run the depreciation for 12/2005 (31/03/2006), posted depreciation reversal entry on 31/03/2006 to nullify effect on B/s and P&L account and the same was reversed on first day of next fiscal year i.e. 01/04/2006.
Regards,
Naresh

FI Year End Closing

hi...
pls tell me t.code for following List for FI Year End Closing
1 Execute Report for InterCompany Activity & Journal Entries
2 Open posting period for next yr
3 Run Business Area's Assignment report.
4 Review list of recurring journal entries
5 Execute Recurring Entries for A/R, A/P, G/L
6 Process Parked A/R, A/P, G/L accounting documents
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8 Run Depreciation in Test Run and post
9 Verify Display Log for Depreciation Test Run
10 Capitalize AUC Assets if needed
11 Enter Payroll Data to SAP
12 Verify Depreciation Balances with GL balances
13 Post Depreciation
14 Execute Asset History Report, and retire assets if needed
15 Adjust specific depreciation areas if necessary
16 Reconcile AM subledger with GL
17 Check Bank Data
18 Review AR Open Items
19 Review AP Open Items
20 Execute Pending Invoices
21 Clear Open Item for GRIR, freight
22 Reconciliation of Financial Documents and transactional figures
23 Open new CO Posting Period
24 Compare current (cost estimates) with last current price (Moving Avg)
25 Update current cost price to material master price field.
26 Process Freight charges, Match SD freight to actual
27 Review Internal Order Postings
28 Settle All Orders
29 Verify All Post Goods Issue have been Invoiced (Billing Due List)
30 Review SD Billng Doc from prior mth that have not yet been released to accounting
31 Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32 Reconcile PI Inventory with SAP
33 Perform Manual Adjustment if needed
34 Verify balance of the GR/IR account
35 Post Accruals and Deferrals
36 Clearing of Cancelled Documents
37 Check Profitability Segment Adjustment
38 Aging Report-Reconcile GL balances with subledger balances AP
39 Check the check run numbers
40 Bank reconciliation Data
41 Enter Tax Journal Entry
42 Reconcile GL balances with subledger balances AR/MM/AP
43 Display Balance Sheet Adjustments
44 Post Balance Sheet Adjustments
45 Post Foreign Currency Valuation (foreign exchange)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area
49 Check COGI--for both month end and year end
50 Doubtful receiviables
51 Verify In-transist Inventory
52 Reconcile PA to G/L
53 Post Cost Centre Assessments and Distributions
54 Run CO-FI Reconciliation to balance
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant
57 Fiscal Yr Balance carryforward AP/AR/AM
58 Fiscal Yr Balance carryforward CO
59 Fiscal Yr balance carryforward FI
60 Fiscal Yr balance carryforward PCA
61 Set Document number ranges - FI - new year
62 Set Document number ranges AP/AR - new year
63 Generate Financial statement Reports
64 Change Fiscal Year For Assets
65 Year end Closing-- Asset Accounting--final for year end
66 Close CO Posting Period
67 Close Prior A/R Posting Period
68 Close Prior A/P Posting Period
69 Close Prior MM Posting Period
70 Reverse accruals and deferrals for the new month
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd
Thanks & Regards
Rekha Sharma

Hi,
Please check this
1 Execute Report for Inter Company Activity & Journal Entries
2 Open posting period for next yr (T.Code: OB52)
3 Run Business Areau2019s Assignment report. (T.Code: F.50)
4 Review list of recurring journal entries (T.Code: FBD3)
5 Execute Recurring Entries for A/R, A/P, G/L (T. Code: F.14)
6 Process Parked A/R, A/P, G/L accounting documents (T.Code: FBV0)
7 Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire (T.Code: ABUMN)
8 Run Depreciation in Test Run and post (T.Code: AFAB)
9 Verify Display Log for Depreciation Test Run (T.Code: AFBP)
10 Capitalize AUC Assets if needed (T.Code: AIAB, AIBU)
11 Enter Payroll Data to SAP (T.Code: CAT2)
12 Verify Depreciation Balances with GL balances ( T.Code: ABST2)
13 Post Depreciation (T.Code: AFAB)
14 Execute Asset History Report, and retire assets if needed (T.Code: S_ALR_87011963, ABAVN)
15 Adjust specific depreciation areas if necessary (T.Code: ABCO)
16 Reconcile AM sub ledger with GL (T.Code: ABST2)
17 Check Bank Data (T.Code: S_P99_41000212)
18 Review AR Open Items (T.Code: FBL5N)
19 Review AP Open Items (FBL1N)
20 Execute Pending Invoices(T.Code: MRBP)
21 Clear Open Item for GRIR, freight (T.Code: F.13)
22 Reconciliation of Financial Documents and transactional figures (F.03)
23 Open new CO Posting Period: (T.Code: OKP1)
24 Compare current (cost estimates) with last current price (Moving Avg) ( T.Code: OKBH)
25 Update current cost price to material master price field (T.Code: CK11N, CK24)
26 Process Freight charges, Match SD freight to actual (T.Code: V-31)
27 Review Internal Order Postings(T.Code: OKSA)
28 Settle All Orders (T.Code: KO88)
29 Verify All Post Goods Issue have been Invoiced (Billing Due List) (T.Code: VF04)
30 Review SD Billing Doc from prior month that have not yet been released to accounting (T.Code : F.2D)
31 Reconciliation of MM movements in Transit Intra-SAP to Non SAP
32 Reconcile PI Inventory with SAP (T.Code: MI07)
33 Perform Manual Adjustment if needed (T.Code: F-02, FB50)
34 Verify balance of the GR/IR account ( T.Code: MB5S)
35 Post Accruals and Deferrals (T.Code: FBS1)
36 Clearing of Cancelled Documents (T.Code: F-03, F-32, F-44)
37 Check Profitability Segment Adjustment (T.Code: KISR)
38 Aging Report-Reconcile GL balances with sub ledger balances AP ( T.code: FBL1N, FBL5N, FBL3N)
39 Check the check run numbers (T.Code: FCH1, FCHI)
40 Bank reconciliation Data (T.Code: FF67 & FEBA)
41 Enter Tax Journal Entry (T.Code: FB41)
42 Reconcile GL balances with sub ledger balances AR/MM/AP ( T.Code: F.03)
43 Display Balance Sheet Adjustments (T.Code: F.5F)
44 Post Balance Sheet Adjustments (T.Code: F.5E)
45 Post Foreign Currency Valuation (foreign exchange) (T.Code: F.05)
46 Check generic cost centers for posting with wrong accounts
47 Correct wrong postings on generic cost centers
48 Check Validation dates for Cost Centers, Cost Elements, CO area (T.Code: GGB0)
49 Check COGIu2013for both month end and year end
50 Doubtful receivables (T.Code : F104)
51 Verify In-transit Inventory
52 Reconcile PA to G/L (T.Code: KE5U)
53 Post Cost Center Assessments and Distributions (T.Code: KSU5 & KSV5)
54 Run CO-FI Reconciliation to balance (T.Code: KALC)
55 Run BW reports P&L and Balance Sheet
56 Maintain CO yr variant (T.Code: KCRQ)
57 Fiscal Yr Balance carry forward AP/AR/AM (T.Code: F.07,
58 Fiscal Yr Balance carry forward CO (T.Code: CXS1)
59 Fiscal Yr balance carry forward FI ( T.Code: F.16)
60 Fiscal Yr balance carry forward PCA (T.Code: 2KES)
61 Set Document number ranges - FI - new year (T.Code: OBH2, OBA7)
62 Set Document number ranges AP/AR - new year (OBA7)
63 Generate Financial statement Reports ( T.Code:OB58) OR (T.Code: FSE2)
64 Change Fiscal Year For Assets (T.Code: AJRW)
65 Year end Closingu2013 Asset Accountingu2013final for year end (T.Code: AJAB)
66 Close CO Posting Period : (T.Code: OKP1)
67 Close Prior A/R Posting Period ( T.Code: OB52)
68 Close Prior A/P Posting Period (T.Code: OB52)
69 Close Prior MM Posting Period (T.Code: OMSY)
70 Reverse accruals and deferrals for the new month (T.Code: F.81)
71 Reconciliation of Financial Documents from old fiscal year and new fiscal year ( T.Code: FNSL)
72 Load Balances, Budget Data for Cost centers, sales
73 Update Retained Earning Account , balance carry fwd (T.Code: F.16)
Regards,

Year ending Closeing

Hi all,
i want Year ending procedure steps help me any one plz.
Thanks in advance
regards
gvr

1     Execute Report for InterCompany Activity & Journal Entries
2     Open posting period for next yr
3     Run Business Area's Assignment report.
4     Review list of recurring journal entries
5     Execute Recurring Entries for A/R, A/P, G/L
6     Process Parked A/R, A/P, G/L accounting documents
7     Final Cutoff for the Maintenance of Fixed Asset- Add Transfer and Retire
8     Run Depreciation in Test Run and post
9     Verify Display Log for Depreciation Test Run
10     Capitalize AUC Assets if needed
11     Enter Payroll Data to SAP
12     Verify Depreciation Balances with GL balances
13     Post Depreciation
14     Execute Asset History Report, and retire assets if needed
15     Adjust specific depreciation areas if necessary
16     Reconcile AM subledger with GL
17     Check Bank Data
18     Review AR Open Items
19     Review AP Open Items
20     Execute Pending Invoices
21     Clear Open Item for GRIR, freight
22     Reconciliation of Financial Documents and transactional figures
23     Open new CO Posting Period
24     Compare current (cost estimates) with last current price (Moving Avg)
25     Update current cost price to material master price field.
26     Process Freight charges, Match SD freight to actual
27     Review Internal Order Postings
28     Settle All Orders
29     Verify All Post Goods Issue have been Invoiced (Billing Due List)
30     Review SD Billng Doc from prior mth that have not yet been released to accounting
31     Reconciliation of MM movements in Transit Intra-SAP to NonSAP
32     Reconcile PI Inventory with SAP
33     Perform Manual Adjustment if needed
34     Verify balance of the GR/IR account
35     Post Accruals and Deferrals
36     Clearing of Cancelled Documents
37     Check Profitability Segment Adjustment
38     Aging Report-Reconcile GL balances with subledger balances AP
39     Check the check run numbers
40     Bank reconciliation Data
41     Enter Tax Journal Entry
42     Reconcile GL balances with subledger balances AR/MM/AP
43     Display Balance Sheet Adjustments
44     Post Balance Sheet Adjustments
45     Post Foreign Currency Valuation (foreign exchange)
46     Check generic cost centers for posting with wrong accounts
47     Correct wrong postings on generic cost centers
48     Check Validation dates for Cost Centers, Cost Elements, CO area
49     Check COGI--for both month end and year end
50     Doubtful receiviables
51     Verify In-transist Inventory
52     Reconcile PA to G/L
53     Post Cost Centre Assessments and Distributions
54     Run CO-FI Reconciliation to balance
55     Run BW reports P&L and Balance Sheet
56     Maintain CO yr variant
57     Fiscal Yr Balance carryforward AP/AR/AM
58     Fiscal Yr Balance carryforward CO
59     Fiscal Yr balance carryforward FI
60     Fiscal Yr balance carryforward PCA
61     Set Document number ranges - FI - new year
62     Set Document number ranges AP/AR - new year
63     Generate Financial statement Reports
64     Change Fiscal Year For Assets
65     Year end Closing-- Asset Accounting--final for year end
66     Close CO Posting Period
67     Close Prior A/R Posting Period
68     Close Prior A/P Posting Period
69     Close Prior MM Posting Period
70     Reverse accruals and deferrals for the new month
71     Reconciliation of Financial Documents from old fiscal year and new fiscal year
72     Load Balances, Budget Data for Cost centers, sales
73     Update Retained Earning Account , balance carry fwd
Month end closing Activities
1. All the expenses including amortization, prepaid expenses, Preliminary expenses and accruals have been booked.
2. Complete Bank Reconciliation
3. Make sure that Sum of Inter company balances is Zero
4. Suspense Accounts should be cleared regularly.
5. Ensure that all documents related to MM & SD have been entered in system.
6. Ensure that all billing documents are released to accounting.
7. Calculate Overheads on all process Orders (CO43)
8. Technically complete all process orders which are fully processed (CORM).
9. Calculate Variance (KKS1)à (Relevant only if Standard cost is calculated).
10. Settle all process orders which are technically complete (CO88).
11. Close All settled Process Orders
12. Close MM period (Transaction Code: MMPV).
13. Carry out GR/IR clearing (F.13) transaction
14. Depreciation Run (AFAB) has been carried out for the month
15. Close FI Posting period after the month end closing activity is over.
Year end closing Activities:
1. Calculate production work in progress on process orders which are not technically complete.
2. Carry out Assessment cycle for Cost Centers.
3. All month end closing Activities should be carried out.
4. Carry Forward Balances to next year
(With TC: F.16 we can carry forward the balance to next year.
With TC: OBH2 copy the number ranges to next year
Open next year periods by selecting the Posting Period Variant.
then test by posting the transaction in F-02)

Problems with year-end closing FI-AA

Hi Experts,
I'm trying to close 2008 year in AA (tr. no.: AJAB). I'm getting the list of assets and "Depreciation not posted completely" for each asset. Then I tried to post this depreciation for those assets (tr. no.: AFABN) and got "The entered fiscal year 2008 is in a closed time period." (comm. no.: AA-692). I've chcecked last closed year in FI and found that it is 2008. So I tried to reopen 2008 (tr. no.: OB52) and a special period no.: 13 and post the depreciation once again to that special period (tr. no.: AFABN) and get the same error (AA-692).
Is there some additional procedure I must accomplish to post depreciation to closed FI year ?
Please help.
Thanks in advance,
Konrad.

Hi,
Check in OAAQ which Asset fiscal year is closed. probably it is referring to closed Asset year.
Check once and revert and also write down the detail message of AA-692 here so we can get some clue..
Regards,
SAPFICO

Year end closing error

Hi All,
We are trying to change the fiscal year in asset accouting to 2010 but cannot do it.
fiscal year 2008 in asset accounting is still open and cannot close it, when trying to close 2008 system give error message as "Depreciation not posted completely" for some assets.
when trying to run depreciation for 2008 getting error message as "Only an unplanned posting run is possible in this fiscal year."
We do not have any unplanned depreciation process configured.
Could any one please help on this error.
system is not allowing any asset transaction in the current year 2010, need some suggestions ASAP.
thanks

Hi Ramesh,
Yes i agree that planned and unplanned depreciation are different, we do not want to skip any planned depreciation we want to process planned depreciation but system gives mesage as
Message no. AA693 "Only an unplanned posting run is possible in this fiscal year."
As there is planned depreciation to be processed in previous year we want to process the planned deprecciation and carry out year end closiing for that previous year in asset accouting so that the current fiscal year can be opened in FI-AA for asset transactions processing.
Thanks

Change fiscal year to 2006 in Asset Management : error in year-end closing

SAP version: 4.0B
Transaction Codes used: Year-end closing AJAB, Fiscal year change AJRW
We are trying to change the fiscal year to 2006 in Asset Management.
I tried to change the fiscal year to 2006 for the company code 0055 using transaction code AJRW. The test run has displayed an error message Fiscal year change in co. code 0055 1 possible only after year-end closing 2004 2.
I have used the transaction code OAAQ to find the out the fiscal year, the closing for depreciation area is successfully performed.
Unfortunately it is still showing 2003 which should have been 2004 for company code 0055.
I tried to close the fiscal year 2004. The test run has completed successfully. I have scheduled the RAJABS00. The program has executed successfully with no errors or warnings.
The closing for depreciation area (Transaction OAAQ) is still showing 2003 for company code 0055, which should have been changed to 2004.
I am new to Asset Management. Can you please give some suggestions on how to fix the problem and change the fiscal year to 2006.
Thank you,
Vidya

Hi,
Thank you very much for your prompt reply.
I have used transaction OAAR to check if any area is still open for previous years.
Surprisingly! The areas are closed only till 2003.
Can you please let me know what to do (transaction codes - programs) to close the areas for fiscal year 2004.
I am new to Asset Management. I think you are good in Asset Management. Can you please give some suggestions on how to close the fiscal year 2004.
Can you please let me know if I have to run any other transactions other than closing the areas before running the transaction to close the fiscal year 2004.
Thank you very much.
Sincerely,
Vidya

Assets Year-end closing

Hi
One of our group companies are facing the issue below.
*. When trying to run any asset transaction the error message "Fiscal year change in co.code J002 possible only after year-end closing 2008" . We are currently in 2010 in financial accounting.
AJRW -Change to new FY 2009 was successful, but for 2010 the same error msg above is displayed.
*AJAB -FY close
- 2008 : The planned depreciation was not completely posted to Financial Accounting for asset 000000300090-0000 in company code J002 in depreciation area 01.
When I check AW01N, there is a planned depreciation amount for 2008 period 12. However, depreciation has been completed for 2009. If I try to a repeat run for 2008 in test mode there is a value coming up. The issue is posting periods are close. Current financial period is in 2010.
Your assistance is greatly appreciated.
Thanks
Nadini

The following are the important steps you must keep in mind while closing asset accounting.
1. Recalculate all asset values AFAR
2. Run program RAUNVA00
3. Run program RAANLA01
4. If you find any unposted assets in step 3 delete them if you do not want in AS06 / AS26 (group assets)
5. Update your insurance index OAV5 (if necessary)
6. Run your regular month end closing process.
7. Reconcile FI-AA with GL accounting - transaction code ABST
8. AJRW - Fiscal Year change
9. AJAB - Close fiscal year
10. reopen the fiscal year OAAQ (if only necessary)
11. Perform all year end closing steps.
Thanks,
Ravi

Asset accounting - asset year end closing

Dear Experts,
For the year 2008 the depreciation was not processed in asset accounting and now i processed depreciation for the total year from 1 period to 16 th periods by keeping FI period 2008 open and documents were posted successfully. Now i want to close the 2008 period for asset acccounting and i want to open 2009 period for asset accounting .
But i am getting error like Transactions not completely periodically posted. It is taking to 2 paths.
One is Define How depreciation Areas post to General Ledger
Here for my client 3 depreciation areas are there 1) book depreciation 2) Tax depreciation 3) Delta depreciation.
Second is Start APC Posting Programme: When i try run this programme "i am getting message like there are no documents to be posted"
Please help me
Thanks
Balu

Hi,
please read the WIKI guide [Year-End-Closing in Asset Accounting (best practices)|/people/javier.reviriego/blog/2008/07/09/year-end-closing-in-asset-accounting-best-practices].
Even if there are no transaction to be posted, you have to execute the periodic posting run. The run itself will create a protocol entry in any case, if there are values to be posted or not. The fiscal year close process checks thit protocol entry.
Regards,
Markus

Asset Fiscal Year End Closing - Depreciation not posted completely in 2010

Similar Messages

Maybe you are looking for