Asset master data issue

HI  All
While i am creating the asset through AS01 with out giving the useful life in depriciation tab
its not allowing me to save
can anybody tell me where do i need to make this field as optional
PS: i have already checked the screen layout of this asset master and i havent found anything relating to depreciation tab

HI All
While simulating the issue in quality(where same settings have been maintained( wrt OAYZ, AO21), In asset master, neither the EXp. UL field is diplayed, nor promts for value when trying to change. Only in Production the error is there.
Any specific reasons? We thouroughy compared screen layout for asset master and depricaition both and there is not defference.
Regards
Prasad

Similar Messages

  • Import fixed asset master data

    When I try to import fixed asset master data from an excel file to the Sap Business, a problem that I cannot identify occurs, and as a result, data is not imported. The process runs normally, data is processed but at the end an informational message says that zero data was imported. I would like to have help on this to solve this issue.

    Hi all
    Message was edited by: JEAN PIERRE LANCEAU
    Problem resolved : see the addon logfile in %temp%/sap business one logs/addonlog.txt to show errors

  • Fixed asset Master Data import

    Please can anyone help me resolve this error messages when importing Fixed asset master data
    "Net book value of asset must be greater or equals to zero"
    Am using SAP Business one version 9.0 pl9

    Hi Bright,
    Please check below link.
    Error message during Import of Fixed Assets after Upgrade of SAP 9.0 to PL10
    Hope this help
    Regards::::
    Atul Chakraborty

  • DI API to import fixed  asset master data and acquisition.

    Hi,
    Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
    Have been used to add fixed assets, and would like to perform using the API to import fixed  asset master data and acquisition.
    The commands to access the table of fixed assets related to the API that is available?
    Thanks.

    I have the same problem...
    Is there anyone who have tried these things?

  • About settlement, asset master data's amount column value

    Dear Experts,
    I  build an aseet master data :   A (the amount column's value is 0 in asset master data)
    Then, I build an asset purchase order  assign to A , after I  do GR,  A's amount column's value change to 1.
    But if as follows,
    I  build two asset master data :  B and C ,
    B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
    Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
    I  do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
    but the asset value certainly has transfer  from B to C......
    why B's amount column's value doesn't be changed?
    I can't figured out.
    Thanks a lot in advance.
    Best Regards,
    Yacoa
    Edited by: Yacoa Chen on Mar 15, 2011 9:14 AM

    Hi
    If B is still showing value - It means values are not settled
    After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
    Br, Ajay M

  • Master data Issue  ---   materials have unassigned or # values ...!!

    Hello Experts,
    I am facing an issue that the Customer Data is missing in a BEx Report.
    Data Flow is   2LIS_13_VDITM  --> DSO1 --> Merging DSO -->  Cube --> Multiprovider --> Bex Report.
    Exact issue is Customers in the Bex Report  has unassigned to Sales Office, Sales Group, Sales District.
    The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
    customers are assigned with two values. one which has data and the other which has unassigned value.
    I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
    Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
    After that checked the Cube data values are displayed except the Master Data values.
    I guess..its completely related to Master data. I would like to know how can i resolve this issue.
    Please reply me if you face this kind of master data issue in your expeiriance.
    Thanks,
    SN.

    Hi,
    Are Sales Office, Sales Group, Sales District are attributes of Customer?
    In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
    and also check if the customer characteristic is properly assigned in the multiprovider.
    Check if it helps.
    Regards,
    Joe

  • Attaching document in the Asset master data

    Hi All,
    If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this  in SAP?
    Also while doing asset transfer, how can we transfer the attached documents?
    Please provide inputs.
    Regards,
    Jayasudha

    Hi ,
    Below is the configuration steps
    Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
    · Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
    · Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
    Procedure
    Then if you check the service object in AS02 it will be in active status.
    Regards,
    Jayasudha

  • Creation of asset master data

    hi sap gurus,
    i have a problem regarding saving of asset master data.
    while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
    you cannot save the asset(correct depreciation error)
    Diagnosis: you have choosen the function save.the system found an
    internal problem when calculating depreciation for a check document.
    sys responce:The asset cannot be created
    procedure:1 check the error from depreciation calculation by
    performing the function "Test doc.'again.
    2 if you cannot correct the error ,contact your sys specialist.you
    must then cancel your current processing.
    please help me regarding the problem......

    hi
    check your depreciation area settings for the asset class

  • Modify fixed asset master data thru migo

    Hi experts,
    I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
    In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
    Do you think a way to call AS02 (change asset master data) thru MIGO exists?
    Best regards,
    Ruben

    Hi Ruben,
    Did you find a solution to your problem? I have a similar requirement.
    I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
    Cheers
    Wayne

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • Custom Field in Asset Master Data

    Dear Experts,
    I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
    I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
    I'm using a new installed SAP GUI 7.3 .
    The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
    The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
    Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
    Thank you.

    Hi Karim
    You can go through the steps below to customize the field u2018Planned. retirement onu2019
    1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
    Alternatively
    2, Use AO21 to customize the field as above.
    Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
    Hope itu2019s helpful
    George

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • Changes of asset master data - S_ALR_87012037

    Hi Colleagues,
    Could please help me by settings in order to see changes of asset master data ?
    I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
    There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
    In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
    is there any another option to get request display of data ?
    Thanks a lot for your response

    HI Gora,
    Standard report is the best option, but you can also use Table CDPOS:
    S_ALR_87012037 Output:
    You can also use Table CDPOS/CDHDR, in se16n.
    Regards
    Javed

  • User Exit - Create Asset Master Data from MIGO

    Hi Experts,
    I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
    Cuold you help me?
    Thank a lot.
    Kind Regards
    Giampaolo

    Hi,
    Why you want to create the Asset master at the time of MIGO.
    Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
    If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
    If it is that important in your business process then give the authorization of Asset Master data creation to User.
    I personally feel this requirement is not feasible.
    Regards,
    Shayam

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

Maybe you are looking for

  • Dynamic Subject Line not appearing in PO mail

    Hi Experts, In tcode ME28 when i get the list of POs to be released , I click on the release possible icon against the PO number. On clicking of this, a mail goes to the vendor of the PO. My requirement is to change the subject line of this mail. I h

  • Driver problem with 60GB fifth generation Video iPod

    I am trying to sync up my iPod for the first time. I already had itunes on my computer and used the install CD that came with. My computer recognizes that is an iPod that is connected through the USB port. In device manager it shows a yellow question

  • How to write the output of an SQL query to a text file?

    I am using Oracle 11g and SQL plus. I have a large table called rating. Whenever I do SQL> select * from rating; The output goes much beyond what the SQL Plus screen can show. I want to therefore store the output of this query into a text file. How c

  • BI Publisher - Stop hyperlink underlining in html

    Hi, My users are developing many templates using the word plugin and uploading the rtf files to publisher. We can create hyperlinks to other web pages and they work correctly BUT they always come out underlined in the html document we are generating.

  • SELECT option question....

    Hi all, What is the meaning of FOR ALL ENTRIES IN.. as in the code below: where can I find the documentation of FOR ALL? Code: SELECT * INTO CORRESPONDING FIELDS OF TABLE L_SPETAB           FROM VBAK           FOR ALL ENTRIES IN LVBUK           WHERE