Asset Tables for legacy data takeover

Dear Friends
We've to take assets data from one client to another and hence would be using Legacy assets.
Could you please let me know from which tables / reports i should extract the data related to master & transaction data from the legacy system which is also on SAP.
ANLA - master data and to take those assets which are not deactivated
ANLB
ANLC - asset accumulated APC & dep. And current yr dep
ANLZ - dep terms data
ANEP - asset transaction data for current year acquisitions
I dont have the system in from of me and i hope the above tables are correct.
1. Please let me know if other tables are required?
2. Should the dep area data be posted with remaining useful life & expired life in legacy asset?
Regards
Kapil

Hello Kapil,
I invite you to carefully review the attached SAP notes which should
provide you with the necessart answer:
68802   Legacy data trnsfr: diff.fields n.ready f.input
550176  FAQ note legacy data transfer asset master records
373894  Collective note: introdctn to prblm solutn in FI-AA
Further I also attach the following 6 notes that provide further
informative details regarding legacy transfer, and also some specific
only for legacy transfer during the year:
729164  AS91/AS92: Incorrect ready for input status for prop. values
29706   AS91/92/94: Dep. area fields not ready for input
4206    Net book value input at old data transfer
50607   Depreciation during old assets data takeover
26240   Reconciliation of posted depreciat. after takeover
For further information, please review the information for asset data
transfer in the R/3 Library:
FI-AA - Assets -> Legacy Data Transfer -> Special Considerations for
Asset Data Transfer -> Time of Transfer...
thanks and regards
Ray

Similar Messages

  • Asset table for plan data

    hi,
    may i know which table i can get the asset base value for yr 2008? i able to get 2007 data but not able to get 2008 in the asset table.
    thanks

    Hope Table ANLC Asset Value Fields can help you !

  • Asset depreciation for legacy data

    Hi,
    I encounter the following problem, please input some advices.
    An asset from legacy system needed to be migrated into SAP.
    In the old system, it starts to depreciate at rate of 20% per year, but after a period of time, it changes the depn. rate into 14%, and will keep using 14% in SAP.
    My question is how to handle the changed of rate in SAP during migration? As the lump sum depreciation figures in old system in higher than 14% per year which calculated in SAP, SAP would calculate an adjustment figure and post in coming period during depreciation.
    Is it possible to maintain 2 items of depreciation attributes? Specifying the starting dep date and the rate for each period.
    Best Regards,

    No, I understand it is not possible to have one depreciation key to have different rates in it.
    The following are some examples
    17% --> 6%
    17% --> 14%
    15% --> 14%
    20% --> 14%
    Since the depreciation keys have been created for those on left hand side, I'm thinking is there a possibility that I just created two more for 6% and 14%, and telling system change of depreciation rate by specifying the date of change on each asset... Just wonder got this kind of setting or not.
    Thanks!

  • Tables for Credit data

    Hi all,
    please tell me the tables  for Credit data.
    Thanks,
    kishore.

    1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
    hope it helps

  • Tables for Contract data

    Hi all,
    if you know any tables for contract data(For Contract report),
    please tell me.....
    Thanks,
    kishore.

    VBAK-contract header
    VBAP-contract item
    VEDA-changed contracts
    KONV-condition records
    MARA-material related to contract

  • Tables for Budget data

    Hi,
    Please provide the base tables for Budget data
    thanks

    hi Arun,
    check these
    BPGE (overall budgets),
    BPJA (annual budgets) and
    BPPE (period budgets).

  • The table for storing data for infocube and ODS

    Hi all:
        could you please tell me how to find the table for storing data for infocube and ODS?
    thank you very much!

    Hi Jingying Sony,
    To find tables for any infoprvider go to SE11.
    In database table field enter the following
    Cube -
    Has fact table and dimension table
    For customized cube - ie cube names not starting with ' 0 '
    Uncompressed Fact table - /BIC/F<infocubename>
    Compressed fact table - /BIC/E<infocubename>
    Dimension table - /BIC/D<infocubename>
    For standard cube - ie cube names  starting with ' 0 '
    Uncompressed Fact table - /BI0/F<infocubename>
    Compressed fact table - /BI0/E<infocubename>
    Dimension table - /BI0/D<infocubename>
    Click on display.
    For DSO,
    For standard DSO active table- /BI0/A<DSO name>00.
    You use 40 for new table.
    Click on display.
    For customized DSO use- /BIC/A<DSO name>00.
    An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
    Double click on the name and choose display.
    Hope this helps,
    Best regards,
    Sunmit.

  • Method :Want to Use Z-Table for Accessing Data

    Dear All,
      I am new to BADI. I have implented one HR-PAYROLL Badi.
      In this BADI I am having one method . I want to Use One Z-table for accessing data from
      that table . Not able define the table in method.
      Kindly tell me how to do it .
      Thanking you in Advance
      Siladitya

    Hello Siladitya
    I assume your problem is the definition of an itab for selecting data from your Z-table. In case of classes you have to use table types and workareas, e.g.:
    METHOD name_of_interface_method.
    DATA:
      lt_itab    TYPE TABLE OF <name of z-table>,
      ls_record  TYPE <name of z-table>.
      SELECT * FROM <name of z-table> INTO TABLE lt_itab.
      LOOP AT lt_itab INTO ls_record.
      ENDLOOP.
    ENDMETHOD.
    Regards
      Uwe

  • Dynamic Internal Table for reading data from external file

    Hello All,
    The task was to create a internal table with dynamic columns,
    Actually this is my first task in the WebAS 6.20, my program is based on input file provided by user with certain effort. this file can have different effort for a one yr to five year frame..
    I needed to read the raw data from file, based on months create a internal table to hold the data, after this i need to validate the data...
    I have browsed thru dynamic internal table topic, but couldn't find any dynamic appending structure, the dynamic structure would contains 12 month fileds.
    can any one help me in getting my task completed..
    Thanks
    Kumar

    Hi,
    I see that you posted the same question a couple of days ago at Dynamic Internal Table for reading data from external file Didn't Charles's response address your problem?
    Regards

  • System table for Additional Data - Basic data text (MM03)

    Hi
    How can I get the system table for stroring data in MM03 in "Additional Data" the "basic data text" ?
    Thanks in advance.

    Hi,
    CALL FUNCTION 'READ_TEXT'
             EXPORTING
                CLIENT                  = SY-MANDT
                ID                      = 'Z610'
                LANGUAGE                = SY-LANGU
                NAME                    = V_TDNAME
                OBJECT                  = 'VBBK'
                ARCHIVE_HANDLE          = 0
             IMPORTING
                HEADER                  = I_TEXT_HEAD
             TABLES
                LINES                   = I_TEXT_LINE
             EXCEPTIONS
                ID                      = 1
                LANGUAGE                = 2
                NAME                    = 3
                NOT_FOUND               = 4
                OBJECT                  = 5
                REFERENCE_CHECK         = 6
                WRONG_ACCESS_TO_ARCHIVE = 7
                OTHERS                  = 8.
    Regards,
    Bharani

  • Error while filling set up tables for 2LIS_11  data sources

    hello All ,
    I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
    Job started
    Step 001 started (program RMCVNEUA, variant &0000000000005, )
    Start of order processing
    Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
    Job cancelled
    Is there any setting required in R3 side before filling setup tables of SD ?
    I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
    Regards ,
    Amol Kulkarni
    Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
    Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

    Hi,
    one of the sales document currencies is not maintained properly in the system and therefore its failing.
    you need to correct those documents before filling the set up tables.
    Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
    This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
    generally you will see the sales doc number in the error for which its failing.
    May be at the time of filling some óne was working on some sales document and tried it save it.
    correct that doc and fill the set up tables again.
    Thanks
    Ajeet

  • Table for material data tab

    HI,
    what is the table for material data tab in PO?
    Regards,

    Data at item level i.e. may be material data, invoice data is stored in EKPO.
    Regards,
    Sarang

  • Table for Sales datas assinged to Equip/Floc

    Hi
          I need a table for Sales datas like sales org,distribution channel,divition,sales office,sales group assigned to equipment master,
    Points assured
    Thanks
    Seenu

    hi seenu
    yes you are wright the sales organisation, DC,Divison is strored under the ILOA table only , since in equipment its being picked from the view table,you can interrelate with FL and equipment
    regards
    thyagarajan

  • TO FIND TABLES  FOR MASTER DATA TRANSACTIONS

    HI , When we create a customer, the information is updated in structure RF02D and some tables like KNA1 are updated ..
    How can we find the tables for master data transactions.?
    please reply...
    thanks.

    Hi,
    I entered into the TC : ST05, Activated the trace then I created a customer, then I came back and deactivated trace, then I clicked on display it gave me a list ( yellow color list ) ... Wat do u mean by update methods here ...
    Thanks
    SK SIDDIQUI

  • Table for Plan Data

    Hi Experts
    Created Cost Element Groups and Cost Center Groups and have Uploaded Plan data in KP06.
    Kindly provide me the Table Names for Cost Element groups,Cost Center groups and Plan Fixed Costs.
    Thanks & Regards
    KumarRaja
    Edited by: Kumar Raja D on Oct 7, 2009 2:36 PM

    Hi,
    Tables for groups are SETNODE and SETLEAF. Select by object class the required group (cost centres, cost elements, etc.) The tables for planning are COKP (primary) and COKS (secondary).
    Regards,
    Eli

Maybe you are looking for