Asset transfer from company code to company code

Hi ,
I want to transfer assets from one company code located in India to another company code located in the US. The existing configuration is as under.
Both the the company codes share the same "chart of accoutns" but the "chart of depreicaiton" and the "controlling areas" of the above two company codes are different.
The client wants to transfer the assets at net book value.
In the above scenario (1) is it possible to transfer the assets.
(2) shall we have identical depreciation areas in both COD's
(3) what would be transaction variant should we use? and the its mapping the transaction types in "Define Transfer Variants" node?
Moderator: Please, avoid asking basic questions

Dear,
Please check: Re: asset transfer within company code from one plant to another using STO
Re: how to transfer  an asset from one plant to another plant within comp code
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/asset-transfer-237416
Regards,
Syed Hussain.

Similar Messages

  • Asset transfer from one company code to other

    Hi,
    I have a scenario to transfer asset from one company code to another company code due to merger.
    Say two company codes X & Y. From 01.04.14 onward Y merged with X  only X exists from that date
    So we want to transfer the assets from Y to X as on 01.04.14  and values of those assets should reflect in X with Gross Value and Accumulate dep posted in Y already.
    For that we are trying to post the same through ABT1N by selecting no revenue and tranfer variant as 1. ( i dont want system to calculate and post any reveneue
    I want following entry to be posted during tranfer
    DR Gross value in X CC
    CR Gross value in Y CC
    DR Accmulated dep in Y CC
    CR Accumulated dep in X CC
    system should not post to P&L GL during transfer.
    Or is there any other method through which we can address this..
    Thanks
    Karthikeyan G

    Hi Karthik
    There is more to it than mere asset transfer
    Usually, during merger, the assets are reevaluated . In thatcase, it helps to retire the assets in Y and rrecreate them in X..
    If you are just taking the assets as-is, then do Abt1n.. Note that the acc entry won't match in each company unless the clearing account is brought in..
    In Y:
    It has to be Dr. Accum dep , Cr. APC and the balance goes to a clearing account
    Similarly in X, same thing will happen
    Br. Ajay M

  • Asset transfer from an affiliated company with depreciation

    Hello - Can you tell me how I can translate the following business scenario in SAP ?
    1) An asset is purchased from an affiliated company. This company is represented as an inter-company vendor in our company code.
    2) The initial value of the asset in affiliated company is 100 EUR. And it is depreciated with an amount of 30 EUR in the affiliated company.
    3) In our books we would like to show the depreciation in the legacy system and continue depreciating the asset with NBV 70 EUR.

    hi
    post an FI Document with transaction type 145 or 146 and check

  • Asset transfer from One Business Area to another Business Area

    Hello,
    I am going to transfer my Asset from One Business area to another business area. So, I allready created a new asset and transfer through TCODE-ABUMN. But system gives me this error
    Posting with trans.type 320 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 320 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    can any one please tell me how I transfer my Asset from one business area to another Business area?

    Hi
    First make sure in your company code global setting in the OBY6 for company code wise ..Iin this screen  Indicator: Business area financial statements required if it is ticket
    Please  don't change business area for old asset . because it will effect the Business area balance sheet.  So create new asset and change business area at cost center level
    Finally transfer the balance from old asset to new assets in the ABUMN
                OR
    IF you want solution as per your issue ..Go to SPRO-> Financial Accounting-> Asset Accounting->Transactions-> Specify Default Transaction Types
    Here enter Default Transaction Types  300     Transfer of retir. old assets data from cap.asset
    in the filed of Transfer Between Areas
    I hope it will helps you
    Thanks and Regards
    sudharshana vamsi

  • Asset transfer from one plant to Another plant/Vendor

    Hello,
    Trasfer of asset from one location to another location/ vendor excise impact sholud flow without FI impact.
    Scenario is like this:
    we are creating Capital PO for AsSET procurment from Vendor with A/C  "A",  then in Item level of Delivery adress tab we check the "SC vendor" bcz our intention is to.
    Material directly sent to Different vendor and But stock is Shown in Our stock like "Material provided to vendor". After the GR
    Now this "material provided to vendor " asset we can send to Different plant/vendor with excise impact without FI Impact how to do this?
    Regards
    Mahesh

    Hi,
    Do a return to vendor from the first plant, modify the PO to include another line item to be received by the other plant and you can set the deletion flag for the first line item.
    This assuming that there is no invoice posting is done.. if yes.. then credit memos also come into picture.
    hope this helps

  • Configuration settings Inter Company asset transfer

    Hi
    Can you please give material on Configuration settings Inter Company asset transfer. we have 2 different company codes under same client. we want to transfer some assets from one company code to another company code. please help
    Regards
    Sreenivasulu

    Go to T.code ABT1N
    1. Give transferring cocode and asset number that you want to transfer
    2. Give the cocode to which you want to transfer and select whether you want to transfer to an exisiting asset or create a new asset
    3. Maintain Acquisition from affiliated company and clear revenue sale to affiliated company accounts in AO90 for the contaicode to which u r transferring.
    4. Maintain Company for both the company codes in OBY6
    Assign points if helpful
    Sneha.

  • Asset transfer .. Special depreciation values

    Hello friends,
    I was doing an asset transfer from one company code to another company code.. both belong to same Chart of depr. everything looks fine all APC, ordinary depr values got transfered to the new asset but the special depreciation values for the depreciation area ( 10 federal tax acrs macrs) is not getting transfered.  Is there any setting that I am missing in the config.
    Any help is appreciated
    Thanks

    Can Any one help me regarding this issue

  • Excise asset tranfer from one plant to another within the company code

    Hi All,
    Please provide me the procedure how to transfer an asset from one plant to another.
    The asset is an excisable pls provide the process for accounting in SAP for movement of FA on which we have taken excise duty and further we have to pay duty on removal of FA
    Edited by: siva prasd on Oct 19, 2011 7:11 AM

    Dear,
    Please check: Re: asset transfer within company code from one plant to another using STO
    Re: how to transfer  an asset from one plant to another plant within comp code
    http://sap.ittoolbox.com/groups/technical-functional/sap-acct/asset-transfer-237416
    Regards,
    Syed Hussain.

  • Asset Transfer with two company codes

    Hi
    We have a requirement in which we need to transfer the asset from one company to another. However, there is VAT calulated on the transfer of asset from one company code to another. We need to create an invoice, calculate taxes and then transfer the asset.We do not have SD & MM  Module and we cannot create one company as a customer or vendor
    Regards
    Sanil Bhandari

    hi,
    If the country is same for both the CCs, then you must have been assigned the same COD also to your CCs.
    One thing i didnt understand is that, why this taxation is required while transfering an asset from one company code to another CC within the same country.
    Because the COD will be maintained at country level.
    And one more thing is that if both CCs were assingned to same company ID, then there would be no need of caluculating tax.
    This asset transfer cannot be treated as a new asset purchase in the receiving company code, since it is just a internal transfer within a group company.
    But still if you want to calculate tax, you have to manullay calculate the tax and need to post a JV.
    Please correct if i am wrong....
    Thanks,
    Srinu

  • Asset Transfor from one Company Code to Other Company Code

    Hi i want to know how to transfor total Assets from one company code to other company code
    Ex:
    1 - ABC
    2 - XYZ
    XYZ is my new Company code i have 100 assets in ABC Company Code, i am using that assets since last 3 years how can i transfor total Assets
    Please suggest me,
    Regards,
    Venkat

    hi
    through intercompany transfer it can be possible,first you have to configure two company codes OBYA T-Code,ther you have to give posting keys ,g/l account.
    I hope This will solve your problume.
    assign me points
    Regards
    Ramana

  • Transfer from COmpany code to another Central Person..

    My client req is to transfer one Employee from company code to another COmpany COde
    COmpany COde      Number Range
    HIL1           1000 - 50000
    HIL2          100000 - 200000
    Transfer EMployee 1111 from Company COde HIL1 to HIL2. SInce it is not possible to change his Number from 1111 to 100000 series it is not possible, I suggested to Seprate that employee from HIL1 and rehire in HIL. Now client wants all thta master data to be copied into HIL2 company code. Please adise how to handle this...
    Thanks
    Ravi.

    Hi SAPHCM,
    You are seeing some of the problems when you use Personnel Number to indicate something other than a specific individual.  You should not separate blocks of PERNRs by Company Code or any other grouping for the reasons you are now seeing - people get tranferred and the PERNR should not change.  The Organizational Assignment infotype contains all the fields necessary to separate out employees - PERNR should not be used for this. 
    If the Company Codes are in different countries, you can use the action "Cross Country Transfer".  This will retain all the personal data infotypes for an employee while it terminates him from one country and hires him into the other.  A better way to handle cross country transfers is "Global Employment".  If you are in 4.7 and above you can activate this and it will allow you to have more than one personnel number for an employee.  Here you use CP-Central Person to identify the employee. 
    Again, remove the separate blocks of numbers from being assigned by Company Code and your situation would be resolved by a simple transfer action. 
    Paul

  • Balance transfer from one company code to another company code line item

    Hi
    I have company code A in which Suppose for one GL some balances are exists. Now I have created two different company codes B and C and same GL has been created in both company codes now I have to transfer balance from A to B with all line item wise.
    please tell how to do it.

    ASSUME YOU HAVE 1 GL AS WITH 2500 DR BALANCE AND YOU WANT TO TRANSFER 1000 TO B AND 1500 TO C. CREATE BALANCE TRANSFER ACCOUNT IN ALL 3 COMPANY CODES.
    IN COMPANY CODE A
    BALANCE TRANFER AC DR 2500
    AS AC CR 2500
    IN COMPANY CODE B
    AS  AC 1000
    BALANCE TRANSFER AC 1000
    IN COMPANY CODE C
    AS AC 1500
    BALANCE TRANSFER AC 1500
    YOU CAN CREATE LSMW FOR FB01 AND TRANFER LARGE NO OF GL ACCOUNTS/ LINE ITEMS  IN ONE GO.

  • Exchange Rate Type default different from M for a company code

    Dear SAP guru,
    Would you shed some light on this?
    How would we be able to default/assign a different exchange rate type from M at a company code level?
    I have a company code - finance company - that every foreign currenty transaction needs to be translated using different exchange rate type (i.e. daily hedge rate) than other operating companies.
    The OB22 screen makes it appear as M rate is specificied as 1st currency in company code, but grayed out and not able to change.
    Please help me with your expertise on this.
    Kind regards
    taro

    Hi,
    ExRateType is hardcoded in
    Main Program     SAPL0F03
    Source code of   L0F03I01
    *------- Daten zur ersten Hauswährung -
      rfcu4-curtp = '10'.
      rfcu4-bwer1 = '0'.                                        "AT 23039
      rfcu4-kurst = 'M'.               <<<<<
      rfcu4-cursr = '1'.
      rfcu4-curdt = '3'.
    The reason why the assignment of exchange rate type M to the first company code currency is a historical reason. A lot of coding within the SAP system is directly developed under the prerequisite that the exchange rate type for the first company code currency is M.
    As you described you want to setup several company codes in one client that all have the same first company code currency but should use different exchange rates. To solve that issue there are 2 ways available:
    The first way is that you use the functionality to assign an exchange rate type to a document type. That would mean a lot of work because in that case you would have to define all document types seperatly for
    every company code.
    The second possible solution is that you use different names for the fist company code currency.
    That means for example that you name the first company code currency in company code 0001 USD and in company code 0002 US1. So you can use different exchange rates for the same currency.because in that examle USD and US1 are only different names for the same currency. Using this approach you can have different exchange rates for different companies with the same company code currency by setting only different names even though the exchange rate type M is fix asigend to the first company code currency.
    Best Regards,
    Gladys xing

  • Stock Transfer between company to company(company code to company code)

    Hi Experts,
    I have inventory status report on Inventory cube running fine in Production, i succesfully pulled ASN qty, stock trasnfer between plants, stock transfer between storage locations now i need to pull Stock transfer between Company to compnay (company code to company),Can any one share there experience.
    Thanks In advance
    Ram

    Hi,
    Stock transfer between plants in the same company code is Intra-company transfer and stock transfer between plants in different company code is inter-company transfer and an intercompany as well as customs invoice is generated in this instance.
    Refer the following link,
    http://help.sap.com/saphelp_46c/helpdata/en/fd/45bfe09d6411d189b60000e829fbbd/content.htm
    http://help.sap.com/bp_autov1600/Auto_JP/html/A62_EN_JP.htm
    Regards,
    Ravi.

  • Need to download the data from BSEG based on company code and fiscal year

    Hi All,
              Please suggest me the solution to download the data from BSEG based on company code and fiscal year. As data in BSEG for the fiscal year2009  is 27 lakhs (= 2.7 million) for the specified company code.
    <removed>
    Thanks & Regards,
    Koti
    Edited by: Thomas Zloch on Mar 26, 2010 4:28 PM - please use English metrics only!

    May I ask what you mean by solution?  You can download from SE11, but where are you going to store 2.7 million rows and what tool are you going to use to store it?
    You probably need a (small) program that extracts what you want, then opens a dataset in an appropiate server-system folder, and transfers the data rows to the dataset as fixed-length or tab-delimited file.  It's been done many times, so suggest that you search.

Maybe you are looking for