Assign Gift Items and qty to a product in BCC

Hi,
I am facing an issue with repository design and BCC UI for assigning a gift items and qty to a product. Basically i dont want to maintain Gift items in scenario files for adding/deleting/updating. I am customizing cartmodifierformhandler to do that. But the requirement is i want to configure Gift SKU and qty to a product.
So for product item descriptor. i added a table like this
<table name="dcs_product_gift_item_cbi" id-column-name="product_id" type="multi" multi-column-name="sequence_id">
<property name="giftList" display-name-resource="giftList" data-type="list" column-name="gift_sku_list" component-item-type="sku"/>
<property name="quantity" display-name-resource="quantity" data-type="list" column-name="quantity" component-data-type="long"/>
</table>
But in BCC UI, qty property is not displaying. Can some one suggest a solution for it. Here is the BCC UI that looks in ATG 2007.
[http://img846.imageshack.us/img846/6459/bccui.jpg]
I initially planned to add a Map property (SKU, qty) instead of data-type list. But the problem is part of the map i.e key value should be of component-item-type="sku" and value should be of component data type long which I am facing difficulty to design the repository.

OK, here is the definition file:
<item-descriptor name="product">
<table name="dcs_product_gift_item_cbi" id-column-name="product_id" type="multi" multi-column-name="sequence_id">
<property name="giftList" display-name-resource="giftLists" data-type="list" column-name="gift_sku_list" component-item-type="giftlist" />
</table>
</item-descriptor>
<item-descriptor name="giftlist">
<table name="gift_item_cbi" id-column-name="gistlist_id" type="primary" >
<property name="sku" item-type="sku" column-name="sku_id" />
<property name="quantity" display-name-resource="quantity" data-type="long" column-name="quantity" />
</table>
</item-descriptor>
I hope it helps.
Peace
Shaik

Similar Messages

STO or PO for multiple line items and multiple destinations

I am working in retail enviornment and I have folloowing two questions:
1- we need to push articles( materials) to approx 1400store- we need to create STO with approx 10 line items and send materails to 1400 stores- this happens several times a year.
what is the easiest way to create this document without having to create either 1400 documents or create one document for all stores and enter 14000 lines? (Sames items/ and qty going to all stores)
2- We also have to send approx 600 items to one or two stores at a time ( when a new store is opened)- these items are same.
Is there a way to create this STO/ PO and keep reusing this document again and again withoiut entering 600 line items everytime this requirement comes up ( this requirements comes up anywhere from 10 times per year to 50 times/yr
Does anyone have any idea on how to simplyfy this process. Any help/ idea would be of great help.
Thanks
Raj

A PO once entered can be copied in ME21N, by drag-n-drop into the shopping cart. The problem might be changing delivery dates and delivery plants.
Another option is to use BOMs.

Minimum and Multiple Order Qty attributes by product

What are the options for managing Sales Order Multiples. Would like to have the option of setting required or optional quantities. For example, Product A is shipped on a pallet with 12 units. Would like orders to be managed as 12, 24, 36 etc. In other words, the 12 would also become an order minimum. In some cases this should be mandatory. Is this an item master field? If not, how is it normally managed? As an added bonus, the ability to flag these multiples as mandatory for only certain customers or sales channels would be better still. Any ideas?
Thanks,
Chris

Hi,
This is the definition of your questions:
Order Multiple u2013 you can set a multiplication factor for ordering the item e.g. in
case you define 5 in this field and14 items are required, the MRP will recommend to
order 15 items (3X5=15). If 18 items are required, the recommendation will be to
order 20 items (4X5).
Minimum Order Qty u2013 you can type a minimum quantity for ordering items by the MRP.
The planning data is apply when there is a requirement (sales order, forecast, production orders (for the child item) and reserve invoice.
JimM

Serial Number assignment for main items and sub items

Hi
All, good evening, i need clarificaction on the serial number assignment. My client's requirement is to maintain the serial numbers, so in this regard when i am confirming production order in this i need some information how the serial numbers are picked and consumed for main items and the sub items.
I need someone to help me in solving this.
Regards
Narsing

dear Narsing,
please look here:
http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c817b3f911d1896e0000e8284931/frameset.htm

ITunes account to pay for gift apps and Apple Store items

Is there a reason why i cannot use my iTunes account funds to pay for gifted apps and Apple Store items?
it only make sense.

You can use your iTunes Store balance to purchase from the Mac App Store, but not from the Apple Online Store.
From http://support.apple.com/kb/HT4463, "Note: If you have an existing credit balance on your iTunes Store account, that balance will be shared across the iTunes Store and Mac App Store."

How can we transfer product attributes from an already existing site? We have thousands of items and it would be tedious to do them one at a time. Is this possible through a CSV?

How can we transfer product attributes from an already existing site? We have thousands of items and it would be tedious to do them one at a time. Is this possible through a CSV?

There are two parts to this:
1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

How do we define the state of Product Backlog item and Task?

Hi,
I am new to TFS Test management, can any one tell me when do we define state (New, Approved, Committed, Done and Removed ) for a Product Backlog Item?
When we define the state (To Do, Done, In Progress, Remove) for a Task?
Thanks.

Hi,
You erroneously posted your question on the Project forum which is dedicated to the Microsoft scheduling and planning enterprise solution.
Please go to the following
TFS TechNet forum.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Hi experts how to see Main items and subitems of a configural product

Hi CRM experts
Can please tell me how to check the Main item and subitems of the business transcaion of configurable product in CRM.
what is the key field to check subitems for particular main item.
eg:
1. main iteam
1.1 subitem.
1.1.1 subitem1.

Your question is not very clear.Can you please write in detail giving an example.
From what I gather, you probably have 2 blocks.
One will be a query block where you have a list item(countries) , when you select a country, you want data to be retrieved in Block 2(Detail block).
Based on this assumption, you will have to code on when-list-changed trigger.
go_block('detail_block');
set_block_prooperty(...to set the where clause for country)
execute_query;
This is based on my assumptions of 2 blocks.
DK

Missing Parts in production Order no committed date and qty

Hello Guru,
May I ask your help to check our issue when we create a Production order, we got an error Order has missing parts. When check the Availability Check view, most of the components do not have committed date and qty even there are available stocks on them.
Can you help check what went wrong and its possible solution already check OPJK and OPJJ seems we have correct set up for this.?
I tried to check in CO09 on one component. from there there is also 0 committed qty and date. While the other component has OrdRes with 0 committed qty and date and there are some with values. Please help thanks.

Hi Ramagari,
OPJK
Plant AAAA
Ord Type: YYY1
Avalability Check: 2 (Check availability during order release)
Material Availability Part
Check mat. availability when saving order (tick)
Checking Rule : YP (PP checking rule - Production Order rel.)
Component Check Type : ATP Check
Release Material: 1 (User decides on release if parts are missing)
PRT Part
Checking Rule : 02 (Status check and inventory audit)
PRT Release : 1 (User decides to release when there's no PRT)
Capacity Part
No check (tick)
OPJJ
Availability Check: 02 (Individ. Reqs)
Checking Rule: 01 (Checking rule 01)
Stocks parts:
Include safety stocks (tick)
Missing parts processing part:
Checking period: GR : 0
In/outward movements part:
Incl. Pur Ord : X
inlc. pur Req (tick)
incl. dep req (tick)
Incl. reserv (tick)
incl. sales req (tick)
incl deliver (tick)
incl. ship notif (tick)
incl rel ord reqs : X
incl pld ord : X
incl prd ord : X

Assignment of leads and opportunities by product

Hello everyone,
I need to assign leads and opportunities by product to selected personnel, is there anyway to detect more than 1 product in the lead or opportunity? This is because a lead and opportunity may have several products bundled together and it would be very repetitive for the sales person to create one lead\opportunity for each product they sell to the same customer.
Any ideas on how to accomplish this? I was initially thinking of using Books, but it allows for only field comparisons of single values and not multi-picklists. So in the end the problem still comes back to having more than 1 product in a lead\opportunity.
Hope you guys here have some suggestions. Thanks again!

Hi Venky,
Yes, the initial thought here is to use a multi-picklist; but unfortunately I don't think the assignment manager supports multi-picklists.
And yes, I would like to make it accessible to multiple people, not only one.
Basically, the process goes something like the following:-
1) Marketing obtains lead and enters into the system
2) Lead is channeled to a product manager
3) Product manager reassigns the lead to a salesperson
4) Salesperson converts the lead into an an opportunity - Product Manager should be able to view this opportunity
My question here is would the product manager still gain access to the lead once it is reassigned (salesperson is not reporting to the product manager in anyway)? And how can the product manager be able to view all opportunities which have the product he\she is in charge of?
My initial thought here is that we have to fall back on using Books?
Thanks.

Procedure to Assign Inspection Plan and to Execute it

Dear All,
pls explain me the step by step procedure to ceate an inspection plan and assigning it to an manufactured item and also explain me how to clear the goods from QM after the production confirmation.
Regards,
Srini

Hi muthu
First include quality view in material master. There assign inspection type 04. Inspection during GR. Then activate this.
Then in QA 32 assign inspection characterstics with UD code and set release to this.
Once you do GR for production in MB 31 goods will be automatically posted to inspection stock.
Then double click on that in MD 04 screen and do UD with good quantity and scrap qty with correct storage location.
after savings this goods will be automatically posted to unrestricted stock.
Hope this will clear
Regards
J . Saravan

Line item wise Qty in Handling Unit Management

Dear All,
I am working and testing Handling Unit Management. As per the client requirement, he wants Multilevel Packaging (Manually) for materials as-
E.g. 100 Pieces will be packed in 1 Small Carton.
       100 Small Cartons will be packed in 1 Big Carton.
       10 Big Cartons will be packed in 1 Pallet.
Now while creating delivery I packed 2 materials separately. And in the item level it is showing as a whole, means total 1100 PC packed in 11 Small carton, 11 Small cartons packed in 5 Big cartons and 5 Big cartons packed in 2 Pallets. Please find the below screen shot.
Now when I check this delivery number in tables LIPS-VBELN, it is showing the entire qty of Small carton, Big carton and Pallets as 11, 5, 2 respectively. But actually it has show each material or line item wise No. of Small carton, Big carton and pallet used.
E.g. For 1st material Small Boxes = 5
                               Big Carton = 2
                               Pallet = 1
      For 2nd material Small Boxes = 6
                               Big Carton = 3
                               Pallet = 1
My question is, is there any table or logic where I can fetch all these details for all material that how many packaging material and qty has been used. Because in packing list the same needs to get printed each line item wise. I checked in VEPO and VEKP table as well but not getting any input.
Kindly help.
Regards:
Abhishek

First of all, why you don't have any quantities assigned against Small cartons, big cartons and pallets?
Well, for your requirement. As functional consultant, you should be smart enough to interpret & analysis the data when you have tables and data in hand. Anyways, in your case,
As Pallet is the highest level pack material.
Pass HU no of pallet in VEKP- EXIDV, in your case for one of the pallet, it is 1000013558.
For that you will get, Internal HU no. VEKP-VENUM, say, 86.
Pass VEKP-VENUM = VEPO-VENUM.
With that you will get Lower-level HU, VEPO-UNVEL, that will be internal HU No for Big Cartons & VEPO-VEANZ for packing material quantity.
Then pass VEPO-UNVEL = VEPO-VENUM, by this you will get internal HU No for Small Cartons in VEPO-UNVEL & VEPO-VEANZ for packing material quantity.
Again, pass VEPO-UNVEL = VEPO-VENUM, by this you will get following info:
Table - Fields
Field Desc
VEPO-VEPOS
HU item
VEPO-VBELN
Delivery
VEPO-POSNR
Delivery Item
VEPO-VEMNG
Packed quantities
Try and share your feedback.
Thanks, JP

Error while editing PO - deleting service line item and creating material line item.

In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?

PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L   (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
                            Available = 0      (Carry Forward done for Budget & Commitments)
2011:                   Budget = 75.15 L
                            Actual = 53.86 L
                            Comm = 21.01 L   (Same as Remaining Commitment)
                            Avai = 0.28 L
Hope this will help.

Can't add a goods-issue with more than one item and one is serial managed.

Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006        with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
          .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
          .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
          .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
          .SetCurrentLine(n)
          .Add()
          rs.MoveNext()
          n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

Hi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick

Gift item

Hi,
My client is delivering some product to the customer and with that product he gives a gift to the customer.... gift are maintained as inventory. so first item will be the product and next item will be the gift in sales order or invoice... now when i make a pld design i should not see the gift item in it only the first line item(product) should be displayed.... any ideas..
regards,
Vignesh.R

Hi,
In PLD, you can make use of the linkTo in the field properties.
Assuming the Item code = GIFT.
When it is normal item, you want to display Itemcode (F_001), Quantity (F_002), LineTotal (F_003)
You can create a formula field with the content F_001!='GIFT'. And this formua is F_004
In the General tab of field F_001, F_002, F_003, you can see something called LinkTo. Put in F_004 for all these 3 fields.
Hope that help.
Edited by: Shwu Hua Gan on Apr 9, 2011 12:24 PM

Assign Gift Items and qty to a product in BCC

Similar Messages

Maybe you are looking for