Assign Task to a specific user based on the value of DDL from the form

Hello,
Can any one please advise me on how to assign a task to a specific user based on the value of the drop down list from the form. E.g. user fills the form and before they submit the form they have to select one of the name from the drop down list so the form can go to that person for approval.
Thanks in advance,
Han

I got it works now by using the xpath expression (in workbench) to assign to the selected user from the DDL in the form.

Similar Messages

How to use adapter to assign task to a specific user

hi all,
I'm currently trying to configure a task in an approval process so that it is assigned to a specific person according to the organization of the requester. I've written a little method which looks up the suitable username for the given organization name from a file (we might change this later, but this is ok for now) an returns it, created an adapter using this method, but it looks like as if I can't map the Adapter return value to the user field to which the assignment will go.
I'd love someone to help me out...

assignRequestToUser
public void assignRequestToUser(long plRequestKey,
long plUserKey)
throws Thor.API.Exceptions.tcAdministratorAlreadyAssignedException,
Thor.API.Exceptions.tcAPIException,
Thor.API.Exceptions.tcInvalidUserException,
Thor.API.Exceptions.tcRequestNotFoundException,
Thor.API.Exceptions.tcUserNotFoundException,
tcAPIException
Assigns an Administrator to a request. This can only be done if the request does not have a current administrator. The user being assigned must be a member of one of the groups assigned with administrative privileges to this request.
Parameters:
plRequestKey - The key for the Request.
plUserKey - The key of the User to assign as an administrator
Throws:
tcAdministratorAlreadyAssignedException
tcAPIException
tcInvalidUserException
tcRequestNotFoundException
tcUserNotFoundException

OIM - Email notification to a specific user based on a dynamic rule

Hello, After creation of account in a particular target resource I need to send an email to a specific user based on the location of the user (e.g area admin).
In the notification tab of process tasks, I see only "Assignee", "Requestor", "User", "User Manager"? How can I achive the above specified requirement?
Before posting this question, I tried to search the forum for any previous posts related to this. But I couldn't find any. May be I was not searching with right key words.
Any help is appreciated. Thanks in advance.

You'll need to custom code an adapter to send the email, then you can send to any user you want. Create a new task and trigger it off the completion response code. You can use the following apis:
tcEmailNotificationUtil sendMail = new tcEmailNotificationUtil(ioDatabase);
sendMail.setBody("Type your body here or use a string variable");
sendMail.setSubject("Type your subject here or use a string variable");
sendMail.setFromAddress("[email protected]");
sendMail.sendEmail("[email protected]");
Just populate the above pieces with the information needed.
-Kevin

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked. What am I doing wrong?

I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?

If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

Is there an easy way to filter a 2-d array based on the values of two of the fields?

Is there an easy way to filter a 2-d array based on the values of one of the fields. In my attached VI the output array has the following format:
TimeStamp        Ident                Frame Type        Bytes    Data
10:57:07.621   3AD00016   CAN Data Frame   8          0000000000000000
10:57:07.622   3AD00017   CAN Data Frame   8          000005E000000000
10:57:07.624   3AD00018   CAN Data Frame   8          0000000003300000
10:57:07.625   2DC00000   CAN Data Frame   8          0000000000000000
10:57:07.626   3AD00019   CAN Data Frame    4         0000030000000000
I would like to delete any rows that do not have an "Ident" between the values of 3AD00000 and 3AD0001E. So for the above data the fourth row would be deleted. The only way I can see to do it is to form a 1-d array. Is there a better approach?
Thank you.
Solved!
Go to Solution.
Attachments:
CMM_SN_MULTI.vi ‏20 KB

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

When I click on the - fire fox disappears from the task bar; it is still open but gone from the task bar, if I click on any icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Question
When I click on the - to minimize fire fox, it does not close the window but the firefox icon disappears from the task bar; it is still open but gone from the task bar, if I click on any other icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

User is unable to appoint an employee from the previous tax year

Hi Experts,
Can anyone resolve this issue please...
User is unable to appoint an employee from the previous tax year ( 01/12/2010), Appointment date 01/12/2010 for an employee Please asist...
Regards
Sav

OK .... last user insalled software that was not owned by company. Software removed bug solved.

SYSADMIN - Assigning printer to a specific user only

Hello,
We use a specific printer for the purpose of printing checks. However, several times it has happened that users select this printer for printing other reports resulting in Spoiled checks.
We want to restrict only specific user to print on this check printer. Is it possible to assign printer to specific user and restrict others from using it.

There is no supported way to do this via the apps. Notes on metalink suggest to change the name of the printer to something to flag the user like "CHECKS ONLY" then assign a printer style to the printer. This causes the user to have to specify the print style when submitting a request.
Note 145070.1 illustrates this.
-Tracy

Assigning different authorization to same user based on Query

Hi experts,
I am redefining my issue,
Is there any way i can assign different authorizations to the same user but based on either Query/Workbook.
lets say i have two Analysis authorizations A & B and two Queries X and Y.
If the Query/Workbook is X then Add Authorization A to user ABC.
else if the Query/Workbook is Y then Add authorization B to user ABC.
this is because i have two set of workbooks the same user can access and authorization for these two set is different based on the workbook.
I tried using the auth objects 0TCTWORKBK,0TCTQUERID OR 0TCTQUERY but no success so far.
thank in advance.
Edited by: youmenbi on Feb 12, 2008 1:20 AM
Edited by: youmenbi on Feb 12, 2008 1:31 AM

Hi
We have set same kind of authorizations based on the users. The Cost Center Manager is assigned a role and the authorizations for each of the Report/Layout/Workbook is based on his/her profile...some are Read only, some or Read & Write...etc.
If you go through that route......and assign each of the Reports/Layouts/Workbooks to Users....you may succeed.
I know it is a bit time consuming but that is one alternative we could think of as it addressed seamlessly any changes in CC Managers.
Regards
Srinivas

How do I run a scheduled task as a specific user (proxy user)

I am a little stumped here.
We have some Taskdefinition that we can schedule so they run every N minutes or once a day and so forth... works fine...
How can I set which user it is supposed to run as?
I dont want it to run as me or any of the other admins, I wan tit to run as a specific proxy user so that it is easy to see which task that did what changes to a user or resource.
I know that the reconcilliations and active syncs can use a proxy account, and I noticed that I can change a tasks user by editing it in debug after it is scheduled.
But I would like to add it in the taskdefinition itself, trying to find info on how to do that....
either I am missing it in the manuals or I am blind...
/dhurgan

1. WARNING: This procedure is for advanced users only. Some third-party software may not work as expected, or may not work at all, if the home folder is moved.
2. Back up all data.
3. Copy your home folder to the desired location, which must be on a volume of type "Mac OS Extended (Journaled)" with file ownership enabled, as shown in the Finder Info dialog. Encryption is optional. The volume must be on a local storage device, not on the network, and it must be mounted automatically at startup — before any user logs in. A disk image will not work.
The name of your home folder is your short user name. Do not rename it. Do not copy the "Users" folder.
5. Select
 ▹ System Preferences ▹ Users & Groups
Click the lock icon and authenticate. Right-click or control-click your name in the account list, and select Advanced options from the popup menu. In the sheet that opens, change the location of the home directory. Log out and log back in.
6. Test. If you have problems, reverse the above steps. If you got this far, you should have no trouble doing that. If everything works as you expect, delete the original home folder.

Does BPC requires a dialog type user because the jobs are scheduled from the BPC interface?

Hi Gurus,
I am a security person and we have a requirement from BPC functional team that they need a dialog user to schedule jobs. Below is the reply from functional team
"BPC supports only a regular user (dialog) for scheduling jobs and this user-id
requires all the data access inside BPC to run the jobs. So long as the user is
of type dialog and has all the access inside BPC, we should be fine."
My question is Why we need a dialog for something in background. BPC does have a automatically created user BPC_SERVICE which is a System user, can't we use this user instead of a dialog user ? Please advise..
Regards,
Salman

Let me put like this.. Requirement is: For Legal Consolidation run, the authorization required is all data access profiles/task profiles must be assigned to a dialog user else it is failing. Functional is stating that without this access assigned to their regular(dialog) user id the legal consolidation is failing and they also mentions that they can't use system user like BPC_SERVICE to complete this task.
My question: Is BPC is designed like this where we need to give full access to a dialog user to complete a task which runs in background ?

User not able to run a report from the portal

Hi Friends,
We have about 15 reports assigned to a Role. When the user logs on to the protal under new analysis --> Role he/she can see all the reports. One of the user is able to run all the reports except one. the user exectutes the report instead of showing the report out put following error meassage is comming "User is not authorized".
Can someone please suggest how come the user is able to see all the reports except this on.
This report is available in the role, i have checked PFCG and the user has the access to this roll.
Your help is appreciated.
Regards
BN

Hi friends,
As suggested I tried ST01, but unfortunately i dont have authorization for st01.
I did get the copy user of the actual user and i exectuted the report using RSECADMIN, I did check the box with Log and able to execute the report from RSRT. In the output was getting No Authorization, so i went back and checked the Log and in the Log it was showing the two Info Objects 0QUOTA and 0TCAACTVT do not have auhorizations.
0QUOTA is available in the cube, so i will ask the security team to include this in the role will *, but 0TCAACTVT is not used in my cube or in MP then why is it showing up in the logs?. Can someone suggest me please?.
Regards
BN

Is there any way to filter the LCCS room console from the list of users?

I want to be able to hide the user that's logged into the room console from the list of users. Is there any way to identify that user?

Hi,
There is no standard way to hide users as such other than using anonymous presence. But the catch is, if you would set any property of change anything from dev console that publishes a message, then you will be noticed.
The user that logs into the room console is always the owner, may be your client app, you can hide based on your both permission level and name/userID by subclassing Roster. I am just throwing up ideas, but as such there is no standard method for this.
Whats your use case ? It's an interesting thought though and something we would think about on our side.
Hope this helps
Thanks
Hironmay Basu

Assign Task to a specific user based on the value of DDL from the form

Similar Messages

Maybe you are looking for