Assign WBS AVAC not in the lowest level of WBS elements

Dear SAP Community,
Our client has requirement to have budget availability control in WBS element level 3 while the WBS structure is until level 5 and the actual posting will occurred in WBS element level 5.
Our current setting is to have WBS element level 5 as Planning Element and Account Assignment Element. So, user can upload their WBS planning data from the lowest level of WBS structure. Then we copy the Planning Data as Budget through CJ30 and release it through CJ32.
If we set the value of Budget Data in CJ30 and CJ32 until the level 5, the system check AVAC in WBS level 5 instead of the amount rolled up in WBS level 3. If we set the value of Budget Data in CJ30 and CJ32 in WBS level 3, the system will check AVAC in WBS level 3 (as we expected) but the consequence is comparison of actual vs budget in WBS level 5 will have variance 100%.
Is there any way to define the budget data until WBS level 5 but the AVAC control is in WBS level 3?
Appreciate your inputs
Thank you and best regards,
Fitria

Hi,
>If we set the value of Budget Data in CJ30 and CJ32 in WBS level 3, the system will check AVAC in WBS level 3 (as we >expected) but the consequence is comparison of actual vs budget in WBS level 5 will have variance 100%.
We had similar kind of requirement, we had followed the above process. THis will provide the required functionality except the variance in reports. Try and convince the client to settle for this if this meets your requirements.
As AVAC can't be managed at WBS levels.
Regards,
Harsh.

Similar Messages

How to get BOM compoents at the lowest level using BOM tables?

I am doing a report based on CK13N wherein i hav material and plant as the selection parameters and based on that i get the product costing of the entire BOM.
I pass material to MAST.get the BOM num and usage
Pass it to STAS and get STLKN (ITEM NODE NUMBER)
After that i pass STLKN and STLNR(BOM number) to STPO to get the BOM subitems based on UPSKZ(Sub items indicator). But that fails because UPSKZ is nt set for all the assemblies.
So hw do i get the BOM components at the lowest level USING these TABLES

Ashwin
1) As Taj Said, Sub item is not actually a item or component.
2) The sub item number what we are viewing the sub item sceen will be 001,002 like ,it not mean any item
3) For Example a car has 4 wheels, so the item/component description is WHEEL
4) The BOM Quantity of wheel is 4
5) In BOM General item over view, you can select the wheel then click subitem
6) This will lead to sub item screen
7) There you can see subitem 001,002,003 then installation point,subitem text,qty etc
8) Against installation point you can decalre Front Left,Front Right,Rear Left,Rear Left
9) Against sub item text,qty you can declare Front Left wheel-1,Front Right wheel-1, Rear Left wheel-1, Rear Right wheel-1 no
9) This does not mean there are addition Sub items for wheel (ie) additional BOM component)
10) Just declaring the positions for fitting in the car to ease the Assembly Person for fixing the wheel
11) So if you get the cost for WHEEL as assigned in BOM item then ok, don't worry about sub item cost
Reward me if my answer is helpful
K.Prabakaran

How to obtain BOM componnts at the lowest level based on SUB item indicator

I am doing a report based on CK13N wherein i hav material and plant as the selection parameters and based on that i get the product costing of the entire BOM.
I pass material to MAST.get the BOM num and usage
Pass it to STAS and get STLKN (ITEM NODE NUMBER)
After that i pass STLKN and STLNR(BOM number) to STPO to get the BOM subitems based on UPSKZ(Sub items indicator). But that fails because UPSKZ is nt set for all the assemblies.
So hw do i get the BOM components at the lowest level USING these TABLES..

Ashwin
1) As Taj Said, Sub item is not actually a item or component.
2) The sub item number what we are viewing the sub item sceen will be 001,002 like ,it not mean any item
3) For Example a car has 4 wheels, so the item/component description is WHEEL
4) The BOM Quantity of wheel is 4
5) In BOM General item over view, you can select the wheel then click subitem
6) This will lead to sub item screen
7) There you can see subitem 001,002,003 then installation point,subitem text,qty etc
8) Against installation point you can decalre Front Left,Front Right,Rear Left,Rear Left
9) Against sub item text,qty you can declare Front Left wheel-1,Front Right wheel-1, Rear Left wheel-1, Rear Right wheel-1 no
9) This does not mean there are addition Sub items for wheel (ie) additional BOM component)
10) Just declaring the positions for fitting in the car to ease the Assembly Person for fixing the wheel
11) So if you get the cost for WHEEL as assigned in BOM item then ok, don't worry about sub item cost
Reward me if my answer is helpful
K.Prabakaran

Aggregation at the lowest level in the cube

Hi guys
I designed very simple test cube with one dimension (both MOLAP driven).
The dimension PRODUCT consists of three levels:
- Group
- Category
- Product_detail
PRODUCT_SRC table to load PRODUCT dimension:
PR_GROUP_NAME PR_GROUP_ID PR_CATEGORY_NAME PR_CATEGORY_ID PR_DETAIL_NAME PRODUCT_DETAIL_ID
dairy 1000 yoghurts 1000000 yoghurt_1 1000000000
dairy 1000 yoghurts 1000000 yoghurt_2 1000000001
dairy 1000 yoghurts 1000000 yoghurt_3 1000000002
candy 1001 cookies 1000001 cookies_1 1000000003
candy 1001 cookies 1000001 cookies_2 1000000004
candy 1001 cookies 1000001 cookies_3 1000000005
beverages 1002 juices 1000002 juice_1 1000000006
beverages 1002 mineral water 1000003 mineral_water_1 1000000007
beverage 1002 energy drink 1000004 energy_drink_1 1000000008
The cube SALES has one measure:
- Value_of_sales (sum aggr)
SALES_SRC table to load SALES cube:
VALUE PROD_ID ID
1236 1000000002 2
115 1000000006 3
1697 1000000005 4
12 1000000004 5
168 1000000008 6
1984 1000000005 7
9684 1000000004 8
84 1000000002 9
8 1000000007 10
498 1000000006 11
4894 1000000008 12
4984 1000000004 13
448 1000000003 14
4489 1000000004 15
13 1000000001 16
879 1000000004 17
896 1000000006 18
4646 1000000007 20
I created the dimension PRODUCT and a mapping which loaded the data into the dimension. It worked perfectly. The hierarchy was created as I expected.
Then I created cube SALES and a mapping which should load the data into the cube. It is very very simple mapping - there were just only two items on the canvas:
- SALES_SRC table
and
- SALES cube
and two lines:
- from SALES_SRC.VALUE to SALES.VALUE_OF_SALES
- from SALES_SRC.PROD_ID to SALES.PRODUCT_NAME
Then I deployed everything and ran mapping, which loaded cube. But in my opinion the cube was not populated in a proper way, because it was no aggregation performed at the lowest level of product hierarchy - there was only a value of the first occurence of certain product. I mean:
In SALES.SRC we have for instance:
VALUE PROD_ID ID
1236 1000000002 2
84 1000000002 9
For me the the value in the cube should be 1236 + 84 = 1320, but the value in the cube at PRODUCT_DETAIL_LEVEL for yoghurt_3 is only 1236 - first occurence of this product in SALES.SRC.
Why hasn't been the data aggregated at lowest level of PRODUCT dimension hierarchy - is it the way OWB does such things?
Should I manually aggregate the data before loading to cube (just to use Aggregator to aggregate the data at lowest level)? If yes - what about incremental loading of data to cube (the old value value is simply replaced by new one and not summed in the cube)
In data warehouse solutions of other vendors the cube in such situation is loaded as I expected here.
I really don't know what to do. I do really appreciate any help from you.
Thank you in advance
Peter

Hi David
Thank you very much.
Now I'm sure that I have to aggregate facts by myself at the lowest level of hierarchy in a dimension.
Regards
Peter

How to include non-joining records from level one in the lowest level?

As an example the dimension has three levels with data coming from three source tables. The relationships between these tables are zero to many. As a result of this e.g. there are records at the first level that do not join to the second table for level two, i.e. there is a customer entry but the customer has not acquired any products. However, we would like to see in the query for the lowest level also the customers that didn't acquire any products. They are there when there is no filter for the lowest level, but that returns duplicate data. I was hoping I could accomplish this by using outer joins when loading the dimension, but it loads the same as without the outer joins. Hopefully, this trivalized example describes what I am trying to accomplish.

You won't be able to have a true "default" value in the various cascading levels, since there aren't default values in a dynamic cascading parameter. That being said, I've created a sample report in Crystal Reports 2008 that has a Command-driven DCP with '*' values for the 2nd and 3rd levels of my 3-tier DCP and have accounted for them in the record selection criteria. You can find the sample here at https://www.box.net/shared/mav5qp337j

Hierarchy drill down issue at the lowest level

Hi,
In OBIEE 11.1.1.5 I face an issue with drill down to lowest level of presentation hierarchy (expanded by "+" in report). It happens only for combination of 2 dimensions presentation hierarchies in analytics report (parent-child organizational structure + level based product categorization). Aggregated date comes from OLAP but lowest level product information comes from relational database and this details are not displayed.
First I drill to particular sales rep in organizational structure. Then for that sales rep I need to drill down product hierarchy and it works except lowest level of details. At the lowest level of product hierarchy, query sent to database (I have it from logs) return proper results (checked directly in db) but report behaves the way like there are no details at the lowest level and product details are not displayed.
Both (Organizational structure, Product) dimension presentation hierarchies works ok at all levels when used separately. Also product hierarchy works well at all levels (including OLAP->relational drill) when used togather with other level-based hierarchies in subject area.
I am wondering what I could have done wrong...
Advices are very welcome!

Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Why do we need to plan promotions at the lowest level of aggregation

Hi,
The documentation says that we need to plan the promotions at the lowest level of aggregation i.e., the material level. Why? Is there a specific reason for this? Can we plan at other levels of aggregation as well? What happens if we plan at higher level;s of aggregation?
Thanks.

I think it is possible to do it in an aggregated level however you need to define your distribution rules in order to get the desired result, you need also to consider that if distribution rules changes and the value after promotional planning returns the same value, it is possible that detailed level are not realigned to the new distribution rule (e.g. regarding another ratio).
Maybe this is one of several causes.
Regards,
Carlos

Delivery address at Item Level and not at the Header Level

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

It is standard process only.
In Po delivery address is maintained at item level because to which address perticular material to be delivered,
this may change from material to material or may not change

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

Components in the lowest level of costing structure in SO

Hi,
Could you please let me know is any function module to get Components in the lowest level of costing structure in Sales order.
Thanks,
Harinath

Yes, you can manipulate your components any way you like. Becareful about the layout manager though as it likes to handle the positioning and sizing, so there is an intimate relationship there.
Also call validate() on the container after you make your changes.

Brightness in the lowest level still very light, any suggestion ?

brightness in the lowest level still very light, any suggestion ? imac 24" intel

I've installed Shades - works very well:
http://www.charcoaldesign.co.uk/shades#download

Can not change the control level of item attribute "Inventory Asset Value"

I can not change the control level of the item attribute "Inventory Asset Value" from Master Level to Org Level. It's show me the message "FRM-40200: Field is protected against update".
Version is below:
Oracle Application: 10.7SC
Form: INVIDCTL 6.0.26

I did a trace when I chage the control level. the SQL is below:
SELECT COUNT(*)
FROM CST_ITEM_COSTS CHILD
, CST_ITEM_COSTS MASTER
WHERE MASTER.INVENTORY_ITEM_ID = CHILD.INVENTORY_ITEM_ID (+)
AND MASTER.COST_TYPE_ID = 1
AND CHILD.COST_TYPE_ID (+) = 1
AND NVL(MASTER.ITEM_COST,0) != NVL(CHILD.ITEM_COST (+) ,DECODE(MASTER.ITEM_COST, NULL ,0,-99999))
AND MASTER.ORGANIZATION_ID IN (SELECT MASTER_ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE ORGANIZATION_ID != MASTER_ORGANIZATION_ID )
AND CHILD.ORGANIZATION_ID IN (SELECT ORGANIZATION_ID
FROM MTL_PARAMETERS
WHERE MASTER_ORGANIZATION_ID = MASTER.ORGANIZATION_ID )

Warning: Could not find the customization level value for document

Hi All,
I am trying to upload the translation for one of the page at responsibility level.
I am getting following warning when running the below command.
java oracle.jrad.tools.trans.imp.XLIFFImporter $APPL_TOP/xmci/12.0.0/fr-CA/Translated/ARIACCTDETAILSPAGE.xlf -username apps -password apps -dbconnection "$AD_APPS_JDBC_URL"
Warning: Could not find the customization level value for document "/oracle/apps/ar/irec/accountDetails/webui/customizations/responsibility/51688/ARIACCTDETAILSPAGE".
The same is working fine if the translation is for some attribute at site or function level.
Did anyone faced this kind of issue.
Thanks,
Anoop

Anoop,
I am sure you would have verified the responsibility id in the target instance is 51688(may be source instance your resp id is 51688 and in target it is different).
Have a look at this below notes, it might help.
1077267.1 - Unable To Move Resp Level OA Personalization From 1 Env To Another
848851.1 - Attempting To Upload XML File Generates Error: Could not find the customization level value for document
Thanks.
With Regards,
Kali.
OSSI.

Notes at the Item level is not getting Copied

Hi All,
When a quotation is copied by clicking on the "Copy" button, the new quotation has all the Notes copied at the header level. But all the Notes maintained at the Item level dosent get copied.
The Copy control has been maintained between the Item Category (ZAGN to ZAGN) and a Copy Routine 9REVQT is maintained.
Help in this regard would be appreciated.
Thanks
Srinivas

Hi Thomas,
Thanks for the reply.
I tried that but looks like it doesnt work as we are not creating the follow up but copying a quote. Once copied the new quote doesnt have the notes maintained at the item level.
Could you please tell me what would be the "Reference Text Type" for the notes maintained at the item level (As shown in the attachment)?
Regards
Srinivas

Content Area: Cannot edit/drill down to folders at the lowest level

URGENT: Need your help.
I am using Oracle Portal 3.0.6 (Production) installed on Win NT 4.0 Server with Oracle 8.1.7. I am working on hosting a website for my development group.
I created a Content Area and associated it with a page style. Then I created numerous folders to meet the requirements of the various product teams working in my team. Under each folders, I created various sub-folders. Now I want to add items under each folder I created. Earlier, using the link "Edit Folder", I could do by clicking on the folder under which I wanted to create an item. Now when I click on the folder, it returns back the same page showing all the folders along with the icons meant for "Edit", "Add", "Delete", "Move" and "Copy". Nothing is happening and I am stuck here. It displays all the sub-folders with links upto 2-level, since I set the navigator property to the level 2. But I cannot navigate to the sub-folder created at the third level by clicking on the sub-folder link above it (at the 2-level) and add any items under the clicked folder.
Only mistake I could think about was by mistake, I tried to delete a content area which was created for test purpose. There were folders created under this. But I attempted to delete the content area directly without deleting the folders underneath. I got an error saying ".... child records exist". Later while clicking on the tab "content area", I was getting the following error:
An unexpected error ORA-06503: PL/SQL: Function returned without value occurred when executing action of the SITE datasource. (WWC-38130)
(WWS-00000)
Error:No data found (WWS-32101)
ORA-1403: ORA-01403: no data found
ORA-01403: no data found (WWC-36000)
normal, successful completion (WWS-00000)
All product teams already submitted the contents they want me to put on the folders but I am unable to resolve the above problem. Any help / pointer to the above issue will be highly appreciated.
Thanks in advance
Jay

Hierarchy keys are set properly and "use for display" is checked.
Dimension presentation hierarchies does not work only when I use particular two hierarchies togather in one report table. When each of hierarchies is displayed separately it works ok.

Assign WBS AVAC not in the lowest level of WBS elements

Similar Messages

Maybe you are looking for