Assigning Exceptions in BPM Integration Process

hello,
Does any body have an idea regarding how to assign an exception in the control step.
I want to raise an exception in the BPM
Thanks in advance

Hi
If You still have the question unanswered then:
1) In a surrounding block you must define names for exceptions.
2) In the control step you can then pick one of defined exceptions...
3) For the surrounding block you must add "Exception Branch" from block context menu and assign it to the same exception.
Then You can handle the exception there.
Best,

Similar Messages

BPM Integration Process that correlates 2 messages.

I have an BPM Integration Process defined that collects Deliveries for an Order number and when an Invoice arrives for the same Order number it merges the messages to produce another file that is for a 3rd party.
I correctly receive in the Delivery and the Invoice u2013 I can see them in SXMB_MONI with a checkered flag and they are directed to my BPM. I can see this also in SXMB_MONI_BPE. I can also see the correlation correctly found in both messages. No error is reported by either SXBM.. transaction.
However it does nothing except receive the files u2013 I am expecting a transformation and then the send step to execute.
Start > CollectIDOCBlock > Collect Fork
Fork1
Infinite Loop for Receive Delivery (Start process) and Collect in Container. It uses and activates Correlation OrderNum
Fork2
Receive Invoice uses Correlation OrderNum (it does not activate the correlation)
At the end of the Fork (when Delivery collected and an Invoice is received)
It will then do the Transformation and Send Step.
<End
I have tried various combinations of the correlations and which receive step starts the process. Any ideas ?

Yes that did work. Now does somebody know what exactly the FORK parameter number of branches does ?
The SAPHelp is here
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
+You can specify the required number of branches and then define whether the process must run through all branches, or just a particular number of branches+
But it does not explain why you need to have 1 as necessary branches rather than 2. There are 2 branches in the FORK - so why does having 1 as the parameter work and not 2.
In this SAPHelp for Message-Dependent Loop
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
it indicates to me that the parameter should be 2.
BUT the SAP pattern (BpmPatternCollectMessage) I have used as a base for mine has this as 1 and not 2.
Why is 1 the correct value and not 2 ??

Question on BPM Integration Process

Hello Experts,
I am following this BPM article which is very similar to what I want to do.
We are using PI 7.1 without EP1.
I have an XML to IDoc scenario where my XML's external definition resides in a seperate SCV (SCV1) and my imported IDoc resides in a seperate SCV (SCV2). We did this to follow the Sender-Mapper-Receiver model. We have a different SCV for Mapping which holds MM and OM (SCV3). Now, I have my Abstract Service Interfaces for external definition in SCV1 and abstract interface for IDoc in SCV2. And, Integration Process in SCV1 (no good reason). But, now I am not able to access SCV2 abstract interfaces (IDoc abs) in my Integration Process since it sits in SCV1. I am thinking if I have to crate my external definitions, idoc, abstract service interfaces, MM, OM and Ingtration Process in one SCV instead of having them in three different SCVs. I was trying to follow sender-mapper-reciever model but seems like for BPM you need to have all your stuff in one SCV. Please help if you know how to resolve this issue wiithout getting rid of sender-mapper-receiver concept.
Thank you in advance for your help.
- Mayur

Thanks Jose. I think creating dependencies is a away to go. I also found this this where Stefan suggested same thing.
So, now Sender (SCV1) and Receiver (SCV3) have been added under Mapper (SCV2)'s dependencies list and I will have my BPM Integration Process in the SCV2 which will give me access to both sender and receiver abstract service interfaces.
Re: Software Component Dependencies PI 7.1
Thanks,
Mayur

Rfc Jco communication channel error in BPM integration process

Hi,
when we are processing the records some records are processed succussfully some records does not in integration process view. when we restart the workflow we can able to process the error messages succussfully.
but here not understanding how to reprocesse automatically error messages in the BPM integration process level.
thanks and regads,
krushi.

Hi
re-submission of messages after corrections that were failed
Reconciliation of Messages in BPM
Reconciliation of Messages in BPM Contd. - Restart Workflow

Exception handling in integration processes

Hi,
I have a very simple question but I can't find an answer. I have designed an integration process that upon several other things send synchroneously a message to an ABAP proxy. Sometime the ABAP proxy generates exception. In my integration process these exceptionx are catched in a specific branch.
My question is: how to access the data contained in the catched exception (message, text....)?
Regards,
Yann Le Blevec

Hello Yann,
There is no solution for your problem, I guess. I didnt try it on my own, but in my own research on sdn I found two experts positions to that issue:
"you cannot catch the exception's value in the XI "
(see posting from Michal Krawczyk, Jun 12, 2006, in thread catch the exception)
"The content of a fault message are not accessible inside a BPM."
(see posting from Bhavesh Kantilal, Oct 3, 2007, in thread Notify user about Exception in BPM)
Regards,
Dennis

Exception in Integration Process?

Hi,
How can I create an exception in the integration process?
Thanks for yiur help.
Regards.
Stefan

hi Stefan,
While designing ur Integration Process , u have a step called "BLOCK" . In which u have to types of branches 'Exception Handler' and a 'Dead line Branch'.
U can design ur Exception handling steps in the 'Exception handler' branch and move the control to that branch in case if some Exception Occurs.
For Further Information
http://help.sap.com/saphelp_erp2004/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
Regards
Shailesh

Return-Code 99 of integration-process in TR SXI_CACHE

Hallo,
in TR SXI_CACHE my integration-process has the return-code 99 (process cannot be activated). On selecting in the tree (left side) and dobble-click of my process following comes up:
</properties>
- <lines>
<line id="208" predid="207" succid="5" parentid="207" order="0" linetype="DEFAULT" />
<line id="213" predid="7" succid="13" parentid="207" order="0" linetype="DEFAULT" />
<line id="214" predid="13" succid="9" parentid="207" order="0" linetype="DEFAULT" />
<line id="215" predid="9" succid="59" parentid="207" order="0" linetype="DEFAULT" />
<line id="217" predid="59" succid="97" parentid="207" order="0" linetype="DEFAULT" />
<line id="219" predid="97" succid="89" parentid="207" order="0" linetype="DEFAULT" />
<line id="220" predid="89" succid="21" parentid="207" order="0" linetype="DEFAULT" />
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End tag 'prperty' does not match the start tag 'property'. Error processing resource 'file:///C:/W2KMF/Profiles/schmitf/Loc...
<property id="59" guid="d56d20d4195e11daafd60003ba0ff8f5" name="SendMsgSyncResponse" counter="0" type="EXPR" valueType=""...
n-left:1em;text-indent:-2em"> <line id="222" predid="21" succid="23" parentid="207" order="0" linetype="DEFAULT" />
<line id="224" predid="23" succid="25" parentid="207" order="0" linetype="DEFAULT" />
After activating the process once more the detail-information comes up. Then i see the error steps (Message-Type = E). So for example:
Der Wert des Ausdrucks '&CH_EVENT_TAB_DATA.PAYLOAD.ERROR&' kann nicht als Quelle einer Zuweisung dienen (expression cannot be the source of an assignment)
But in the integration-process this seam to be good. What can i do? Delete the container-element and create a new one?
Thanks in advance,
Frank

Hallo,
when i have a look at the details after acitvation my integration-process (with returncode 99) I make changes in my process. But after refresh there are the old items are still there. What´s about the Button "delete runtime Version" in the acivation step? Can i so delete this process in my cash? Have i to make a new integraion-process-object? After copy one process and giving a new name the same problems occures? What is the best solution?
Thanks,
Frank

Adapter Specific Paramters for Integration Process in Configuration

I want to send the data from flat file to idoc through BPM
While doing configuration do I need to explicitly give Adapter specific parameters(Logical System Name) for BPM(Integration Process) or not?
Is it mandatory to give Adapter Specific Parameters for this scenario?
FILE-->BPM--->IDOC(R/3)
Thanks & Regards
Katta Mohan Reddy

Hi,
why would you require Adapter specific parameters (I assume you mean Adapter specific Attributes) - Logical System should be there through the routing (Receiver Determination). What exactly do you want to accomplish by that?
regards,
Peter

Line Split Interface to feed Integration Process - Performance Issues

Hi All
We have a scenario whereby we receive an XML message from a 3rd Party through an exposed SOAP Adapter service. The XML Message has multiple lines that need to be split up and processed as individual messages. We need to create a Line Splitting interface in order to achieve this. The Line Split interface would feed different Integration Processes depending on a specific payload value. The Integration Processes would then perform certain specific logic & Rules as well as transformations to specific message formats (e.g. idoc, xml, flatfile). The Line Split interface also maps from an xml structure that caters for multiple lines, to a flatened xml structure which only contains one line. The uper range of a message we may need to split into individual messages is 30 000 lines.
We first used an Interface Map and used SplitByValue to achieve this, however we ran into the constraint that we could not feed the output split messages to an Integration Process - you can only feed it to Adapters that reside on the J2EE engine.
We then decided to build a seprate Integration Process thats sole purpose was to split the message and route the indvidual messages to other integration processes to perform the logic, business rules and specific transformations. However, the performance of the ccBPM line splitting Integration Process was nowhere near the Interface Map.
e.g. Interface Map Split 1000 Lines = 13 seconds - BPM Integration Process 1000Lines = 100 seconds.
Does anybody have any suggestions on how we can perform the line split outside of BPM, or how we can improve ther performance of the line splitting within BPM?
Thanks for your assistance.
Edited by: CostaC on Aug 24, 2009 11:53 AM

hi,
>>>We first used an Interface Map and used SplitByValue to achieve this, however we ran into the constraint that we could not feed the output split messages to an Integration Process - you can only feed it to Adapters that reside on the J2EE engine.
the easiest (not the only) way :
do the split as you did here and post the results in different folders (file adapter)
then set up scenarios that will get the files from those folders
(many additional objects but will be much much faster and better then a BPM)
you could also split the messages in the adapter module but this is more advanced
and officially SAP does not recommend it - even though it's possible
Regards,
Michal Krawczyk

Multiple Queue Assignment for Integration Process - PI 7.11

Hi,
I am trying to configure multiple Queues for an Integration Process.
The Integration Process is straight forward, except for a Asynchronous Request Response pattern with correlation. (A asynch send step - immediately followed by a asynchronous receive step with Correlation)
I have done the following
1) In IR set the Queue as Multiple - Content Specific
2) In SWF_INB_CONF transaction reconfigured Multiple Queues - Content Specific without buffering
But when I trigger the message, the message is not at all triggering/entering the Integration Process. The error message is BPE Internal Failure.
But if I reconfigure the IP as One Configurable Queue & "Without Buffering", it is working. But we want multiple queues assigned to this Process.
Thanks in advance.
Regards,
Sudharshan N A

Bjoern, there are blogs/wikis available which should be searched before a question is asked on forum. The information you need is quite basic one and I will therefore lock this thread.
Regards,
Prateek

Handling fault messages in an Integration Process (bpm)

I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when a fault occurs my handler is not being invoked and thus the bpm process stops/errors. When I look at the underlying process (via txn swi1), I see the exact error text:
"No exception defined for fault message ObjectNotFoundFault http://www.companyb.com/services/olsa_v1_0/"
From what I understand within the bpm synch call step to the webservice I need to do the following to handle the exception/fault:
- put the synch call (to the webservice) into a block
- add an exception branch to that block named let's say A & set the exception handler of that block to be A
- in the exception setting of that synch step, select A
In my case, I don't care about the fault details other than to ensure it does not stop the whole Integration Process, so in my exception branch I don't do anything. I did try adding a control step within it too (as per SAP Press text book).
Is there anything else I need to do here? I am not mapping the returned fault - does the fault need to be mapped (not sure how I would do this given that the synch step uses an abstract interface and therefore to my knowledge no fault mapping can be done)?
There are 2 Notes that describe my issue exactly:
https://service.sap.com/sap/support/notes/1484903
https://service.sap.com/sap/support/notes/1158699 <-- this one refers more to me, but we already have in 7.11
Can anyone let me know exactly the steps I would perform to handle these faults - does the exception name / handler A above need to be named the actual exception / fault ObjectNotFoundFault?
Any help appreciated.
Thanks,
Keith)?
Any help appreciated.
Thanks,
Keith

Thanks - my scenario I guess is #2 of that blog. But is your take that even if I don't care what is in the fault message, i.e. I don't care about the contents of it but rather I just want to continue on from it, that I still need to perform this java coding? It's not clear to me from what he says - it seems to me he does the java coding to actually capture the contents of the message. I am in fact using the soap axis adapter too, as he is. The screen shot showing the exception branch is basically what I have.
Regards,
Keith

Integration process in File to BPM Scenario

hi,
gud morning. i got a problem while designing a BPM. in designing the integration process in IR, i am not able to get both the abstract interfaces to select from, while defining the container. plz post a solution for this. thank u.

Hi,
In this blog, I have used Business Service created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

Alerts in Integration Process (BPM)?

We are just beginning to use Alerts in PI 7.1. If an error occurs in an integration process (BPM), will it trigger an alert if the Alert Rule is defined wide open? Or do you actually have to trigger the alert in the integration process with an additionl step to trigger the alert?

The Alert has to be defined in ALRTCATDEF.....no matter where the alert comes from (IE, AE, BPE)
If an error occurs in BPM and you have not mainatined proper exception handling for it then....and if the processing shows in red in SXMB_MONI then the alert will be raised as IE alert
However if you have implemented exception handling for a step and then in that exception branch you raise an alert then your BPM will raise alert....the subject of your alert email will be Process <ProcessID>
BPM related alert can be either with static text (using Alert Container Variables) or Dynamic text (using some value from payload)
Please note that to raise an alert from BPM it is not compulsory to only raise it as a Dynamic Alert......static alert can also be raised.
The documents which are available for lower releases are still applicable in alert creation.....so existing blogs/ docs should work
Regards,
Abhishek.

Integration Process - Exception Handling

Hi,
I have developed an integration process, which call web-service, and catch it's exception. The problem is that the WS returns generic exception (SYSTEM) for all exceptions, but with different text for each one.
Is there any way to get the exception text (the text itself and not the type), analyze it and handle the process correspondingly?

Hi Shai,
When you are calling the web-service method in BPM, put it in a block.....in the exception branch of the block, the control will go when the web-service will give exception.........so then put a switch in the exception branch - put the exception message as a condition for switching - do switching on basis of message text - and in the switch branches, do what you want to do for those exceptions.
Hope it solves your query.
Thanks,
Rajeev Gupta

Performance tuning in objects involving Integration process (BPM)

Hi,
We are facing a performance problem in one of our objects having integration process. The messages are getting processed sequentially instead of parallel processing within the integration process. As a result, the messages are getting queued up in the queue waiting for processing. Thus by the time all messages get processed, the time taken would have been alarmingly high. There is no correlation involved in the int process. My questions are
1. Is there any performance related best practices/checklist/config steps available for BPM related implementation. If so, please furnish/provide the links if any.
2. If it is not related to BPM , but related to tuning up of the queues, please provide the guidelines for queue tune up.
3. How to ensure that the messages are processed in-parallel within BPM ?
Regards
Ganesh

Hi,
Am not sure whether this would help you. By any chance did u use For Each instead of Par For Each.
Cos, when u use For each in an container step, all messages would be processed sequentially.
Do let me know if it helps you!
Regards,
B.Anandh

Assigning Exceptions in BPM Integration Process

Similar Messages

Maybe you are looking for