Assignment Field Get Cleared(blank) During Automatic Payment Run(F110)

Hi all,
We have a senario that during the creation of AP invoice, the Profit Center is entered in Assignment field ( BSEG-ZUONR) in FB01.In the invoice document the assignment field value correctly copied into Profit center (BSEG-PRCTR) based on a subsititution rule.
But during the payment document run (F110) the assignment field is get cleared (Blank).and in REGUP table, the Assignment field get populated correctly.
By displaying the payment document using transaction code FB03, the assingment fields is empty.ie field BSEG-ZUONR is empty. .
We have checked all the subsititution rules defined in the system and none of these causing the problem. We suspect there are some hidden subsititution or configurations in SAP that affect the assignment. We also checked the sort key is not the cause of it.
Have anyone encounter the same scenario why the Assignment field get cleared(blank) in Payment document. Please kindly share.
Regards
Riaz

Hi,
I think you are trying to Run Automatic Payment Programme with Check Management and you want to Print check and payment summary.
Kindly check if you have defined SAP Scripts in FBZP Payment Method in Company Code.Select a Co Code and double click on payment method eg C-Cheque, their is a section called FORM DATA you need to input Scripts for the same so that the Payment Programme prints output as defined in the SAP Script for Checks and payment advice
Regards
Rahul

Similar Messages

Automatic Payment Run (F110) posting key setting

HI,
I would appreciate very much if someone could advice me about the posting key setting for Automatic Payment Run (F110). Where is the config done?

Hi Vani,
I am of the view that the solution to this issue would be :-
Moving to transaction FBKP.
Posting Key Allocating/checking.
Defination of each posting key and it field status
PL ASSIGN POINTS, IF USEFUL
Regards
Vivek Sahni

Automatic Payment Run-f110 Reg

Hi,
I am not FICO Guy.But,I need to run the Automatic payment Run -F110.
Can you please explain step by step procedure how to run the F110.
Thanks in advance.

Select run date and enter and identification
Enter your parameters, company code payment methods, next pmt date, select the vendors and/or customers
On the free selection screen you can select values which can be included or excluded
On the additional log screen select the type of logging that you require along with the vendors and customers
On the printout data medium screen youcan select a variant to use when running the program
Save the parameters
Schedule the proposal and run it
After proposal has been created verify it is correct
Schedule the payment run, run it and note posting orders carried out
You can use SP01 to faciliate the printing of checks
Then you can create a payment file - FCHX
Print a list of checks from the check register FCHN
The following link may also assist you...
http://help.sap.com/saphelp_47x200/helpdata/EN/01/a9c079455711d182b40000e829fbfe/frameset.htm

How to get the profit centres determined in automatic payment run - F110

Hi,
In F110 - Automatic payment run, is it possible to get the profit centres determined ?
While doing manual payment, system gives the option to enter the related profit centres.
But in F110 how can I get the profit centre (cost obect) selected ?
Could anyone help ?

Hi
I assume you are referring to the PC for the Bank account?
You can define the default PC in 3KEH.
Rgds
Nadini

Automatic payment run - F110 for range of periods

Dear Friends,
In Automatic Payment Run - is it possible to run for the particular period or range of periods as i need to take 14 days data .
As i need to take only previous 14 days data only
Say for eg. I have customer who is having open item from Period 01-02-2011 to till date 27-03-2011.
eg : it should take the open item in between period of 13-03-2011 to 27-03-2011.
as this need to dymanic
Help me to solve this issue.
Kind Regards,
sarfraz

If you can't use the fields on the Parameter tab, then try the Free Selections tab. If that doesn't suffice, then use the BTE for payment blocking and item exclusion - Process 1820.

Deletion of automatic payment run - F110

Hi,
I have executed a automatic payment run using F110. Many postings have been saved in the system. Is there any way I can cancel this automatic payment run or do I have to cancel the postings one by one with transaction FB08?
Thanks for your help,
Ronan

Hi
If you have done proposal run , and want to cancell the saved proposal then go to F110 --your identification EditProposal--delete proposals.
If you have already executed payment run and system has generated document number against it , then you need to reverse the documents as well as have to voide checks as system has already assigned checks against these payments ,if your payment method is Check for this payment run.
cheers
Mukta

Automatic Payment Run (F110) Logs

Hi,
I want to know whether there is any log/table where I can get details at what time the proposal was executed for a payment run.
Thanks
Suresh

HI Suresh,
Go to Tcode SM37 and you wud find all relevant log details.
Cheers
Megha

Automatic payment run F110

Dear SAP GURU,
When i Run F110 with selection all parameter , that time sys given the error , -Payment proposal could not be carried out
In detail description
Overlap with payment run 15.01.2009 OTV01
Message no. FZ358
Diagnosis
Accounts to be processed in this run have already been processed in payment run or proposal run 15.01.2009 OTV01.
System Response
The run is terminated to avoid double payments.
Procedure
Either narrow down the accounts to be processed or wait until the payments for the 15.01.2009 OTV01 have been carried out.
Please le me solution
I also checked in program RFEWC110 any pending & uncomplited payment run but there also not show any uncompleted payment run .

Hi Milind,
You can delete the previous Run for which the parameters have been saved and also the proposal has been run.
The new run is giving the error because the transactions are already blocked by previous run 15.01.2009 otv01.
Go to the F110 screen.
Enter the Run Date and Identification for previous run, which in this case would be 15.01.2009 and OTV01.
Press Enter
Click on the Edit Button
In the Proposal part click on the Delete option.
Select yes.
Do same for the Parameters option in Edit option.
Now the invoices have been unlocked and you can run using your new parameters.
hope this solves your problem.

Error in Automatic payment Run F110

Dear experts,
I made proposal through F110, when I tried to run Proposal then the message "Proposal has been released " appears.
can any one help me.
Thank you!
Murali

Hi Murali,
There can be several reasons why a proposal is showing released and not otherwise.. Investigate as follows:-
1. Check the status of the background job in SM37. when you start a proposal, the system issues a job in the background probably it was not started and is still waiting there.
2. Probably you did not check "Start immediately" when running the Proposal. Please go to "System\Own jobs" , find there the job and release the job there.
3. You might not have the authority to do payment run. Go to SU53 and check the object for which you dont have the authority.
Hope this helps..
Regards,
SAPFICO

Automatic payment run error

Hi All,
I need help in Automatic payment run (F110). When I am giving the house bank and Account ID I am getting this error.
Bank data for house bank xyz been deleted
Message no. FZ 038
Diagnosis
Under the bank key specified for the house bank, no bank data could be determined.
System Response
The required processing cannot be carried out.
Procedure
Correct the bank key for the specified house bank or create the bank data for the presently valid key once more.
Thanks in advance

Check your bank account and bank keys in FI12 and FI03 respectively.
Thanks
Ashok

Getting extra charge from bank during Automatic Payment Program

Hi All,
Can anyone pls tell me why Getting extra charge from bank during Automatic Payment Program.
Regards,
Ajay

Dear Diwakar,
It is certainly possible to create a transaction variant in SHD0 for the transaction FBZ0. Create a scrteen variant like ZFBZ0. I have done and tested the same and its working fine. When you are creating the screen variant, system issues certain warning messages when you are out of the reallocated option. Just ignore them and create the screen variant.
Once you save the variant, you have to assign it to a package, 6-7 times the system will prompt for this depending on the number of screens in the transaction.
Assign the screen variant ZFBZ0 to FBZ0 transaction using SHD0.
Please let me know if you need further help.
Thanks
Aravind

Automatic Payment Run - Alternate Bank Account in Vendor Master

Dear Forum,
We have a situation where the users want the alternate bank accounts to be maintained in the Vendor Masters and also to select this alternate bank account while doing the automatic payment run thru F110. While we can maintain more than one bank account in the Vendor Master, but how to select the alternate one during payment run. Your help would be highly appreciated.
Regards

Hi...
As per your issue while runing APP in F110 once complete parameters
And go to Edit praposal and double click vendor and double click on line items than it will displays the one more screen there select Reallocate button there you can enter your respective bank details.
Otherwise there is a Business Transaction Event 1810. You can see the code, looks like you need to replicate the vendor bank details with link to a company code.
Note:
Assign Multiple Bank Accounts in the Vendor Master
Your SAP system provides the functionality to store and use
information from multiple vendor bank accounts in the Payment
transactions screen of the vendor master general data via
transaction FK03 (Figure 1). Figure 1 reflects the bank type
determination logic I used in the vendor master, using the
three-digit International Organization for Standardization (ISO)
currency code as the Bank type.
Figure 1 Bank details vendor master
You can use the BnkT (bank type) field in the vendor master to
enter text differentiators for identifying the vendoru2019s bank
accounts. If you leave the bank type field blank against a bank
account in the vendor master, then it serves as the default bank
if the bank type information is missing in the vendor invoice.
You may want to leave this field blank if the vendor has only
one bank account and you want the system to select that bank
account for all payments.
If the bank type is blank for multiple bank accounts, then the
system looks for the first bank account with the blank bank type
in the vendor master to use as the default. You are not required
to define the text values u2014 in my example, INR, SGD, and USD u2014
elsewhere in your SAP system. The field allows any value up to a
length of four characters. Iu2019ll demonstrate the use of bank type
with vendor invoice later on.
The system performs a check at the time of invoice creation on
the bank type value used in the vendor invoice against the bank
type values used in the vendor master. If you have not defined
the bank type value in the vendor master prior to using it in
the vendor invoice, the system shows an error message. The
system performs the check to ensure that you are using a bank
type value in the vendor invoice against which it can find a
bank account in the vendor master. Otherwise, the system cannot
determine a bank account for making payments to the vendor.
Prerequisites for Vendor Bank Selection
You need to take care of a few configuration prerequisites before
you can use vendor bank selection in the automated payment
functionality.
1. Check the Bank details check box in the payment method as
defined at the country level in transaction FBZP. This ensures
the selection of the bank details from the vendor master at the
time of the automatic payment run. If you donu2019t do this, the
system does not copy the bank details into the payment IDoc that
it creates as a result of the automated payment run (transaction
F110).
2. Make the Bank Business Partners field optional in the field
status group attached to the vendoru2019s reconciliation G/L account
by selecting the button under Opt. Entry for this field. This
field maps to the Part.bank type (partner bank type) field in
the vendor invoice. If the Bank Business Partners field is not
optional and is in a suppressed state, then you cannot input the
partner bank type field in the vendor invoice.
I hope it will helps you....
Regards
vamsi

How to generate checks when executing Automatic Payment Program (F110)

Is it possible to generate checks automatically when I execute the automatic payment program? Will reward points to any suggestion. Thanks!

hi patrick
try this.....ur problem may solve.....
Create Automatic Payment Transactions (F110)
Purpose
Use this procedure to generate checks proposals or ACH proposals and then subsequently issue checks or set up ACH files to be transmitted to the bank.
Trigger
Perform this procedure when through either an ACH or a check, a creditor of the University needs to be paid.
Prerequisites
Open invoices with reached due dates have to be present in the SAP system.
Menu Path
Use the following menu path to begin this transaction:
·         Select Accounting Financial Accounting Accounts Payable Periodic processing Payments to go to the Automatic Payment Transactions: Status screen.
Transaction Code
F110
Business Process Information
The automatic payment process will be centrally managed in the Accounts Payable Office. The automatic payment program will be executed each day for all open invoices (across vendors) in the system. There will be separate payment run execution corresponding to each payment method category:
Check payments: clears the open invoices and issues a check output
ACH payments: clears the open invoices and issues an ACH file output
Foreign currency payments: clears open invoices but no output is issued
State/Grant payments: clears open invoices but no output is issued
The process steps executed during the automatic payment program are:
Enter Payment Parameters
Edit/review Payment Proposal
Post Payments
Generate Payment Medium (print checks or create ACH payment file)
Generate Positive Payment File
The payment parameters are entered in order to limit the open invoices and credits selected for payment. It is important to note that the payment terms that are defined on the invoice will drive whether a invoice is due for payment during the current payment run. During the payment program execution, the invoices that are due for payment will be presented to the user on a payment proposal list.
The payment proposal is a list of expected payments grouped by vendor account. Invoices that are due for payment but cannot be paid due to some kind of accounting or system error are listed as exceptions. Examples of typical exceptions are missing banking information (for ACH payments) and blocked invoices. Some payment exceptions will be resolved at the Accounts Payable Office. However the Department must resolve some exceptions. When these types of exceptions appear on the payment proposals, the Accounts Payable Office will inform the Department of the blocked payment in order to get a resolution. Key personnel in the Accounts Payable Office will be the only resources to have access to the editing function of the payment proposal processing. Typically, there is no business reason the edit or change a payment proposal. Editing options for a payment proposal includes: changing the default disbursing bank account information or changing the payment method.
After the payment proposals have been reviewed and edited, the proposals are posted as payments. It is important to note that any open credit on the vendor's account is also taken in consideration when creating the vendor's payment. The payment method supplement defined on the invoice will drive the check sorting.
In addition to the printed check output, the payment program run produces an ACH file and a Positive Pay file. Both files are sent to the bank for further processing. The ACH file contains the vendor's payment and banking data. The Positive Pay file contains the check data (check processed, voided, etc) and is used for confirmation of payments.
Helpful Hints
·         The R/O/C column in the field description tables below defines whether the field is required (R), optional (O), or conditional (C).
·         On certain screens you may have to scroll to view some data entry fields.
·         Click the tab to view the current overall status of the payment process by viewing the informational messages.
Procedure
1. Start the transaction using the menu path or transaction code.
    Automatic Payment Transactions: Status
2. As required, complete the following fields:
·         Run date
·         Identification
3. Click the tab.
The payment program parameters are used to limit the program's selection of open invoices and credits.
    Automatic Payment Transactions: Parameters
4. As required, complete/review the following fields:
·         Posting date
·         Docs entered up to
·         Company codes
·         Pmt meths
·         Next p/date
·         Vendor
5. Click the tab.
Free selection criteria are extended parameter selection criteria used to limit the open invoices and credits selected in the payment run.
    Automatic Payment Transactions: Free Selection
6. Perform any of the following:
If You Want To
Then
Select data by a particular field value; use the match code on the Field Name field to obtain the required field
Enter the required field value to be considered in the payment program selection of open items. The field value is entered in the Values field
Payment selection can be based on fields on the invoice or credit memo document or fields on the vendor master.
Example: A (AP payment block)
Exclude the open items that match your field value
Select to the left of Exclude values.
Include only those open items that match your field value
Deselect to the left of Exclude values.
7. Click the tab.
This information is used to expand the information that is automatically recorded in the payment run log. The payment run log is used to diagnose any program errors during the payment run.
    Automatic Payment Transactions: Additional Log
8. Perform the following:
If You Want the Payment Program Log to Record
Then
Information on due date check
Select to the left of Due date check.
Activate this option.
Any payment method selection data
Select to the left of Payment method selection in all cases.
Activate this option.
Line item information the payment documents generated upon posting the payment proposal
Select to the left of Line items of the payment documents.
Activate this option.
9. As required, complete/review the following fields:
·         Vendors (from)
·         Vendors (to)
Enter the same vendor account number range for Accounts required section of the transaction.
10. Click the tab.
The specifications defined in this section of the transaction inform the payment program the correct form to use for check printing and the correct payment file format to use for ACH payments.
    Automatic Payment Transactions: Printout and DME
11. As required, complete the following fields:
·         RFFOAVIS
·         RFFOUS_C
12. Click the tab.
    Exit editing
13. Click to save the data.
If you want to delete the payment program parameters entered, select Edit Parameters Delete.
    Automatic Payment Transactions: Status (2)
The system displays the message, "Details have been saved for the run on XX/XX/XX XXXX."
14. Click .
If you want to refresh the screen in order to view the current status (processing step) of the payment program click at any time.
    Schedule Proposal
15. Perform one of the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
16. Click to process the payment parameters and create a payment proposal.
While the payment program is selecting and processing data, the status will display the message, "Proposal is running." When the payment proposal has completed and is ready for review/edit, the system will display the message, "Payment proposal has been created."
    Automatic Payment Transactions: Status (3)
The system displays the message, "Proposal run has been scheduled."
17. Click .
    Automatic Payment Transactions: Status (4)
The system updates the status, "Payment proposal has been created."
18. Perform one of the following:
If You Want To
Then
Go To
Execute the payment run
Click .
Step 19
Edit the payment proposal
Click .
Step 43
Display the payment proposal
Click .
Step 54
Display the payment proposal run log
Click .
Step 57
Delete the proposal
Select Edit Proposal Delete.
Step 60
Display the proposal list in a printer friendly format
Select Edit Proposal Proposal List....
Step 62
Display only the exception (error) invoices or credits
Select Edit Proposal Exception List....
Step 67
Exit this transaction
Step 72
    Schedule Payment
19. Perform the following:
If You Want To
Then
Execute the payment program (i.e. process the payment parameters entered and create a payment proposal) immediately
Select to the left of Start immediately.
Activate this option.
Designate a target computer
Enter the name in the Target computer field.
20. Click to process the payment proposal and post the payment documents.
While the payment program is selecting and processing data, the status will display 'Payment is running'. When the payment proposal posted the status will display 'Payment run has been carried out. Posting orders X generated, X completed. (X will represent the total number of checks produced).
    Automatic Payment Transactions: Status (5)
The system displays the message, "Payment run has been scheduled."
21. Click .
    Automatic Payment Transactions: Status (6)
The system updates the status, "Payment run has been carried out." If you click after seeing the status update, "Payment run has been carried out", the system will display an update to the status, "Posting orders: XXXX generated, XXXX completed."
22. Perform one of the following:
If You Want To
Then
Go To
Review the payments posted
Click .
Step 23
Display the payment proposal
Click .
Step 26
Display the payment proposal run log
Click .
Step 29
Display the payment list in a printer friendly format
Select Edit Payments Payment List.
Step 32
Display only the exception (error) invoices or credits
Select Edit Payments Exception List.
Step 36
Print the payment run information
Click .
Step 40
Exit this transaction
Step 72
    Job Log Entries for F110-XXXX-XXXX / XXXX
23. Review the displayed information.
24. Click .
25. Return to Step 22.
    Display Payment Proposal: Payments
26. Review the displayed information.
27. Click .
28. Return to Step 22.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (2)
29. Review the displayed information.
30. Click .
31. Return to Step 22.
    List Variant
32. Click .
    Payment list
33. Review the displayed information.
34. Click .
35. Return to Step 22.
    List Variant (2)
36. Click .
    Payment list (2)
37. Review the displayed information.
38. Click .
39. Return to Step 22.
    Schedule Print
40. As required, complete/review the following fields:
·         Start date
·         Start immediately
·         Start time
·         Target computer
·         Job name
41. Click .
42. Return to Step 22.
    Accounting clerk
43. Click .
    Edit Payment Proposal: Payments
44. Review the displayed information.
45. Perform one of the following:
If You Want To
Then
Go To
Continue with the payment process
Click .
Step 18
Review/edit invoice information for the payment (invoice numbers, discounts, payment amounts, etc).
1. Click on the line you want to select.
2. Click .
Step 46
Change the key payment information (payment method, house bank, payee name and address, etc.)
1. Click on the line you want to select.
2. Click .
This option does not work for lines that have exceptions.
Step 51
    Edit Payment Proposal: Open Items
46. Double-click on the line you want to choose.
    Change Line Items
47. As required, complete/review the following fields:
·         Payment block
·         Discount amount
·         Cash discount %
48. Click .
49. Click .
50. Return to Step 45.
    Change Payment
51. As required, complete/review the following fields:
·         Payment method
·         Pmt meth.supl.
·         Due date
52. Click .
53. Return to Step 45.
    Display Payment Proposal: Payments
54. Review the displayed information.
55. Click .
56. Return to Step 18.
    Job Log Entries for F110-XXXX-XXXX-X / XXXX (3)
57. Review the displayed information.
58. Click .
59. Return to Step 18.
    Delete proposal
60. Click .
    Automatic Payment Transactions: Status (7)
The system displays the message, "Data and log deleted."
61. Go to Step 72.
    List Variant (3)
62. As required, complete the following field:
·         Variant
63. Click .
    Payment list (3)
64. Review the displayed information.
65. Click .
66. Return to Step 18.
    List Variant (4)
67. As required, complete the following field:
·         Variant
68. Click .
    Payment list (4)
69. Review the displayed information.
70. Click .
71. Return to Step 18.
72. Click until you return to the SAP Easy Access screen.
73. You have completed this transaction.
Result
You have executed a payment proposal, executed and posted a payment run and printed checks.
reward me points.......dont forget

F110 - Automatic Payment Run - Checks Will Not Print!!

Hi!
My client executed transaction F110 - Automatic Payment Run for a range of vendors (100000 - 599999). He was able to execute the run but could not print checks and found out that payments weren't assigned check numbers in the system. However, payments were cleared off the vendors account as if they had been paid.
Please help!!
Tks,
Deki

Hello
did you assign a variant in the prinout/data medium tab?
you need to assing the proper house bank, account id and check lot in this variant.
If this is correct then you should get the check number assigned to the payment
document #.
Points will be appreciated
Regards,
Zaid Azam

Automatic payment run

Hi
One of the User run the F110 on some date and gave vendor numbers from 1 to 99999 with AP wire payment. Finally it showed 11 posting orders generated and completed. When I see the FBL1N for the vendor # 10346, it is showing under open only not cleared.
Could you please advise me what should I do for this.
Regards
Murali

Here are a couple of things that you can check.
1. Go to FBZP and check if the payment method is in the country of the company code in which you are running the automatic payment run (also check in 'payment methods in country' if you have anything in allowed currencies. If you have none, all currencies would work. If you have specified any, it will work only for that currency).
2. FBZP - Payment methods in company code - Check if the payment method is assigned to the company code and in the same option (payment methods per country) check if foreign business partner allowed checkbox is checked in case your vendor's country is other than the country of your company code.
3. FBZP - Bank determination - Check if the payment method is having (a) ranking order and CoCd, (b) housebank/payment method (here again the same rule above applies to currency) is assigned to bank account ID and GL account, and (c) available amounts. Value Date and Expenses/Charges are not important.
Good luck!
Assign points if it helps!!!

Assignment Field Get Cleared(blank) During Automatic Payment Run(F110)

Similar Messages

Maybe you are looking for