Assignment of Production Order to Internal Order

Can a production order be assigned to an internal order so that the manufacturing costs can be seen in the internal order?
My scenario is such that I want to manufacture sheet metal dies. The various costs involved are design costs, procurement costs and manufacturing costs. The design costs and procurement costs will be captured in the internal order. I want to capture the manufacturing cost through the production order.
Now the problem is how can I see the total of all three costs in the internal order?
Thanks in anticipation.
Sumeet

As I know,
You can assign internal order as a settlement receiver. Since production order itself is a cost receiver.
Why connot you use internal order instead of production order. You can do GR/GI to internal order.
One more option is you can use cost centre/internal order as a receiver, maintain a minimum price (1unit=1$)in production material and when you settle all the cost will be settled against the cost centre/internal order.

Similar Messages

Assignment of production order to network

Hi,
How can we assign a production order to the network or vice versa.
I know the WBS can be assigned to production order through assignment tab in production order.
Thanks,
Santhosh

Thanks for your response
however while creating the planned order iam encountering the below message
"Account assignment category N invalid"
Message no. 61143
suggest me which planned order profile to be used while creating planned order with transaction MD11
Please also explain me where to assign the network in production order
Thanks,
Santhosh
Edited by: SANTHOSHCH on Aug 14, 2010 8:56 AM

Batch no assigning during production order creation

Sir,
We are manitaining the batch management for inut raw materials. During production order creation it is mandatory to assign the batch no for raw materials then only production order releasing is possible.In our case due to batch assignement to production order while order creation,we are facing the lot of problems like batch no not assign for full req qty and also if unavailabilty of stock for particular batch no it will come to COGI.hereby i need experts help for,
1.I want to determine the batch no during confirmation instead of order creation and also allow to release the production order even batch should be in blank.
Kindly help
Regards,
PS

Hi
For Rawmaterials why cant'n you assign Batch nos buring GR of purchase order.
Then you can do automatic batch determination during confirmation of order for mvrmt type ;261...
This is easy to handle.
Please check and come back
Regards,
srihari

Is there any function for the Batch assignment of production order

There is one function in the CO02(Production Order) which named "BATCH ASSIGNMENT".
CO02 -> Components -> Batch assignment
But the function only can assign one material one time.
This is very boring.
So we are planning to create a new program for it.
But I can't find any function moudle or BAPI can be used.
Could anybody give me some function moudle or BAPI for it?
Tks

Hello~~~Is there any body here?

Problem in Fixed Assignment in Production Order

Hi Gurus
please help me , i am doing below mentioned scenario
1) Set the customization such that, when we release the order,
   Material Staging should happen automatically.
2) Create a Production Order and save it after releasing it.
3) In CO02, delete the Fixed assignment for the AFS Raw
   material and save it.
i cann't able to do step 3. while changing the Production order, system donot't allow me to change the Fixed Batch(Reservation) it saying that "Material assign for WM staging" can anybody knows why so?? does i have to change any spro's setting. or does it mean that after Assignment of Material staging , i cann't change the fixed assignment?????
please give me some idea
Thanks

Hello Subham,
Why not to post your question in the group Industries / Industry Solutions General..
With addition of AFS in the subject line..
Regards,
Siva

Batch assignment in Production order

I am using a bulk material M1 and packing it into a finished material F1. Both M1 and F1 are batch managed. The BOM of F1 calls for M1. I create a production order for F1 and assign a batch to M1 in the order. On release of order I want F1 to be assigned the same batch # as M1 in the order. Can I do this? Is there a user exit?
thanks a lot

Hi,
Theres an exit PPCO0007 before saving the Production Order. Perhaps you can do some tweaks there.
Thanks,
Kumar P

MAterial PRT Assigned to Production order

Dear Team,
I have assigned Material PRT to production order now i want to assign counter to that material for maintenance purpose, means after certain operations mainenance people should replace that material.
How can i assign measure counter & maintenace plan to that material PRT?

Dear Nilesh,
                 Material PRT is always is used in Quantities in Production.
                 If u want a counter for PRT then 1) Create PRT as Equipment.
                 2) Create Counter for PRT.
                 3) Create Intitial Measurement Document for Counter.
                 4) Assign Counter in PRT tab of Equipment Master Data.
                 5) Assign Equipment PRT in Production Routing of that Material.
Narendra

Changing the Assignment of production order in sales order in MTO scenario.

Hello all!
I have following problem:
After the MRP a production order was created for a sales order. Because of the production in another plant
the production order which was created automatically had to be technically completed and a new one
created.
If you want to check now the availability, the sales order finds nothing, because it's linked to the one,
which was technically completed. Now is the question how can I change the production order for this
sales order. (In the production order the correct sales order is connected!)
As I found out it's connected to the field AUFNR in the table VBEP. But how can I change this
field within a transaction and not in the database?!?

No replies

Supply area assignment in Production order

Hello All,
Is there supply area available in production order? As per my understanding the storage locations ( either issue or receiving ) data is available in the BOM of the Production order. But is there any field for capturing the supply area in the production order. If so from where is this supply area picked, is it from the Default supply area in the production version maintained in Material master?And in which tab can i see this supply area information in the Production order.
Regards
Divya

Divya,
There is no field for supply area that can be found in production order. However this filed is available in Work center Master data. WC is displayed in the operation screen of production order.
Supply area (SA) is used in the context of material replenishment area and is situated directly on the shop floor. Many work centers (WC) could be located within a single SA. This field is available in WC so that location of WC can be displayed easily on a large shopfloor.
I am sure this helps. For more questions please come back.
thanks,
Ram

Material Wrongly assigned into production order

Dear Gurus,
I have a question to ask to you, we have a MTO production and I phase that during Production order created within a Sales Order Bom and a Routing (N) the production order correctly maintain all information less than one.
The material allocated into the Routing related to the Sales order BOM are not correctly maintain and I have lots of material allocated to the first operation as defined in SPRO.
Why it's happen?
Into the Routing the material are allocated correctly how can I understand how to let during production order creation the material allocated into the right operation?
Many thanks in advance
Regards
Gianluca

Hi
Generally while creation of routing -CA01/CA02 materials are getting alocated .Now when u create production order -CO01 or convert planned order , that routing Counter /routing type is getting copied to PO depending on the setting you provide in OPL8 in SPRO -Order type dependenet parameters.
Now , for Sales Order BOM , you need to alocate the material in CA02.But u have option in Production Order whether the correct component is getting selected or not if you go down to Operation Overview and review that .U have the option to change the componenet even if you did not able to do at BOM level.
Here is the clue , component will be alocated to frist operation depending on the Opreation/Act Increment u have mentioned (0010,0020) in OPL8 at operation tab.But by default it will be set in 0010-frist operation.
Hope this will clear ur ideas.
Regards
Jia

Assign production order number to batch number automatically

Hi All,
I have been trying to assign production order number to batch number when clicked on create icon in t-code CO02, and successfully assigned Production order number to batch number through EXIT_SAPLV01Z_001
Question:
Now i want to assign same production order number to batch number automatically... is it possible"
If yes, provide me the exit or badi.
Best Regards,
Krishna K

Hi,
Try to use any enhancement point in below mentioned FORM.
In Program : SAPLCOKO1
Include : LCOKO1F3J
Inside below FORM.
FORM header_update.
DATA: flg_q_upd.
DATA: quan_old LIKE caufvd-gamng.
ENHANCEMENT-POINT header_update_01 SPOTS es_saplcoko1 STATIC.
ENHANCEMENT-POINT HEADER_UPDATE_05 SPOTS ES_SAPLCOKO1 .
BR,
Vijay

Assign batch number from sale order to production order automatic

Dear all, I have a question for all. Please help me in this case
My scenario is make to order
I have a sale order, when i create sale order, i have assigned batch number at each line item.
When i run MRP for sale order (MD50), the system generate a planned order for it and I've converted to production order.
So when I view production order, I think that batch number what I've assigned to sale order will be assign to production order but that is not happen.
So, can you help me solve this problem. I think that sap can assign batch number from sale order to production order automatic but i don't know how to configure that
Thanks all

Hi,
To the best of my knowledge, when system is generating planned order / production order from sales order system doesnt copy batch number from sales order.
In fact , you are following wrong practice for generating batch no.
Follow procedure like this :
Create sales order without any batch assigning there. Run MRP with MD50 and then convert planned order to Production Order.
While creation / releasing of Production order, you have option to generate batch automatically by following way :
Go to OPKP (Production Scheduling Profile) -> Take your plant & give suitable name to Production scheduling profile-> Batch Management tab -
> Automatic Batch creation in the order maintain this field as
1 Automatic batch creation at order creation
or
2 Autom. batch creation at order release
This will generate batch number automatically at the time of creation or release of order.
Then follow same process i.e. Goods Issue, Confirmation & GR for production order.
So you will get sales order stock in the form of batch managed.
Check & revert if any issue in above flow.
Regards,
Tejas

Sales Order Assignment not seen in Production order after MRP Run

Hi,
I am running a Scenario with Strat 50.
I am maintaining Strat 50 thru MRP Group in MRP 1 View.
Creating Production Order through Sales Order.
When i am running MRP thru MD02 I am able to convert it to Planned Order but when i convert Planed Order to Production Order, i am not able to get Sales Order assignment in production order
Please guide me,
Thanks in advance,
Harris

Dear Harris,
Sales order planning is done via MD50 not MD02.Hence,please execute the MRP run via MD50.
This will copy the requirement from SO and the appropriate procurement proposal will be generated,say planned order.
Here we will be able to view the sales order assignment.
Regards,
Joseph Charles Vaikathussery
Edited by: Joseph Charles on Nov 3, 2010 4:26 PM

User Exit after creation of Production Order

Hello gurus.
I would like to populate a table with the Production Order number once I create the document in transaction CO01. The problem is, I cannot find a user exit that can be executed after I save the Production Order number.
We use internal assignment of production order numbers, so we don't know the number of the document until it's created. I'd like to find a way to be able to get the number of the document, once it's created and add it in a custom table I created.
Is there a User Exit for this? Or maybe an alternative way of achieving this?
Thank you.

Fernando,
I would suggest you to create a custom table and custom program. The program should pick up the all the orders which were created from AFKO table, on successful completion of running the program it should update the custom table with the date and completion time. So next time when this program is run, it should pick up order who's creation date and time is greater than that in the custom table. You can schedule to run this program in background.
Regards,
Prasobh

Adding Labour charge to an open Production order

Hi,
How do I add a labour charge (for time spent on the job) to an open production order created in CO01?

Thanks.
But there were 10 groups look like from 'Series - Group No. 1' to 'Series - Group No. 2', How did I know which one was assigned to Production Order?

Assignment of Production Order to Internal Order

Similar Messages

Maybe you are looking for