Assignments to collection with user groups seems to be failing

We have a collection with users and a collection with groups. We assign a simple application to a collection with users, that seems to be fine, we can see the app in the application catalog. We then assign the same app to a collection with just a security
group in the collection, the members of that security group cannot see the app in the application catalog.
I am trying to trace what the server does when a the request user policy comes in, to see if there is a disconnect between the assignments and the members of the group.
Any ideas how to debug/troubleshoot this issue?

Hi,
Some troubleshooting tips for client communication to the Application Catalog:
Ensure that the Configuration Manager client is successfully assigned to a site and operational by checking LocationServices.log and ClientIDManagerStartup.log.
Verify that the client can communicate with the management point. For example, check out any HTTP errors in the CcmMessaging.log file.
Check the LocationServices.log file for any errors during the time you browsed to the Application Catalog. One typical reason for Application Catalog failures in this log is client communication failures to the management point, indicated by the following
error: “Failed to send web service info Location Request Message.” In this case, verify that the management point is operational and reachable from the client computer.
If you have recently installed the Application Catalog roles, the configuration on the site system server might take some time to complete. If you have a central administration site, make sure that sites are replicating successfully. In this scenario, information
about the Application Catalog roles must replicate to the central administration site and then back to the primary site before the Application Catalog is fully operational. For example, until the replication is complete, users will not be able to request or
install applications from the Application Catalog.
Ensure that the domain and user name that is displayed in the top right corner of the Application Catalog matches the user that is logged in to Windows, especially if Internet Explorer prompts the user for credentials.
Ensure that any required Internet Explorer plugins are enabled and not explicitly blocked in Internet Explorer. For more information, see
Prerequisites for Client Deployment in Configuration Manager on TechNet.
If you have configured client settings to add the URL to the trusted sites and the URL is not added to the trusted sites zone, check whether the client successfully downloads client policy and also check group policy settings in your environment to ensure
that the Configuration Manager client can add the URL to the trusted sites zone.
If the Application Catalog shows an error page, the error will also be displayed in the ConfigMgrSoftwareCatalog.log. You can find the log file by searching the user profile folder. For example, in Windows 7, you can find the log file inside the following
folder:
%systemdrive%\Users\<username>\AppData\LocalLow\Microsoft\Silverlight
For more infomation, please review the link below:
Tips and Tricks for Deploying the Application Catalog in System Center 2012 Configuration Manager
http://blogs.technet.com/b/configmgrteam/archive/2012/07/05/tips-and-tricks-for-deploying-the-application-catalog-in-system-center-2012-configuration-manager.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

OIM 10g Event Handler : Integrated with User Groups.User Members

I have created custom event handler and integrated it with User Groups.User Members data object.
here is my code od event handler class:
public class GroupEventHandler extends tcBaseEvent {
     public GroupEventHandler() {
          this.setEventName("Event Handler Sample");
     protected void implementation() throws Exception {
          System.out.println("============@@@@@@@@ IN EVENT HANDLER ");
          try
          String groupKey = this.getDataObject().getString("Groups.Key");
          writeToFile(groupKey);
          catch (Exception e)
               e.printStackTrace();
But I am getting this exception :
ERROR [ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcTableDataObj/getString encounter some problems: Column 'GROUPS.KEY' not found
com.thortech.xl.dataaccess.tcDataSetException: Column 'GROUPS.KEY' not found
     at com.thortech.xl.dataaccess.tcDataSet.getColumnIndex(Unknown Source)
     at com.thortech.xl.dataaccess.tcDataSet.getString(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.getString(Unknown Source)
     at oim.GroupEventHandler.implementation(GroupEventHandler.java:19)
     at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcUSG.eventPostInsert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.ejb.beansimpl.tcGroupOperationsBean.addMemberUsers(Unknown Source)
     at com.thortech.xl.ejb.beans.tcGroupOperationsSession.addMemberUsers(Unknown Source)
     at com.thortech.xl.ejb.beans.tcGroupOperations_ejm77u_EOImpl.addMemberUsers(tcGroupOperations_ejm77u_EOImpl.java:1671)
     at Thor.API.Operations.tcGroupOperationsClient.addMemberUsers(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.security.Security.runAs(Security.java:41)
     at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
     at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
     at $Proxy66.addMemberUsers(Unknown Source)
     at com.thortech.xl.webclient.actions.UserGroupMembersAction.assignMemberUsers(Unknown Source)
     at com.thortech.xl.webclient.actions.UserGroupMembersAction.assignGroupMembers(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
     at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
     at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)

Anyone have idea about why "Groups.Key" not found exception thrown here..
I have assigned this event handler at postinsert event of User Groups.User Members Data Object.

Problems with user group

Hi, i created a new user group with some administrative rights:
Access Administration
Advanced Document Submission
Create Communities
Create Community Infrastructure
Create Folders
Create Portlets
Edit Own Profile
Then, i created a user and added to this group.
When i login with the user i created, the Administration Tab doesn't appear.
Somebody can help me please.
IT'S URGENT !!!!
Thanks

I thought access administration was all that was required. Did you get it resolved. Usually these things clear themselves up with time.

Problem with user group querys in transaction Ad-Hoc-Quey

Hello experts.
I have one doubt, i need to know how when I execute transaction S_PH0_48000510 (Ad-Hoc-Quey), like obtaining that by defect appear querys of a certain user group. I have tried with the user's parameters AQB, AQQ, AQW but nothing works. Can help me somebody?
Thank you very much.
Regards.

Hi Marcos,
Your approach is correct. You set the User Parameters AQW for the Query Area (Standard or Global)AQB for the User Group and AQS for the Infoset. This is set for each individual in their own User Parameter tab (System --> User Profile --> Own Data). This will default the infoset and queries you want. The first screen will appear blank as you enter Ad Hoc Query, but if you click on the Open Folder icon you will see the list of saved queries for that User Group and Infoset. AQQ will give you a particular query every time.
You must make sure the User is assigned to the User Group via SQ03.
Paul

Variations issues with User & Group Site Column value

Hi all,
I have created variation sites. e.g. http://mydomain/en-us for english & http://mydomain/de-de for german language. I have created custom page layouts. This page layouts are based on custom content types. I have created a column called "User"
which is type of "User/Groups". I am registering this column to my page layout. http://mydomain/de-de is my default site.
Now I am editing column called "User" on page & save it. It saves data properly. But when I am propagating these changes to another site that is http://mydomain/en-us. It shows me all controls with values filled. but with "User"
column, its showing me blank value.
Any suggestion. ?
Thanks in advance.

http://webcache.googleusercontent.com/search?q=cache:kNlxGIj5f1kJ:sjoere.blogspot.com/2007/11/5-reasons-why-you-should-not-use.html+&cd=2&hl=en&ct=clnk&gl=in
Content types not propagated
Risk
When you add a content type to a page library in the variation source, this type is not automatically propagated to the other labels (see
my previous post). If you then create a page with that content type in the variation source, it does get published to the other labels but loses its content type field values.
Proposed solutions
Set up your site via a site definition that already contains the proper content type bindings to the page libraries. All labels will use the same content types
Put a good governance plan in place to make sure manual changes are done in every label
If this helped you resolve your issue, please mark it Answered

HT3231 Problem with User & Group panel

I cannot open the 'User & Group' panel. I get Could not load Users & Groups preference pane." How do I fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

List of users with user group

Hi,
I wonder why in all existing users lists I know I don't see the user group they are assigned to.
I have no problem to get the users by user group (su10) but what I need is a list of all users (name,adress,...) + user group they are created in.
I have tried RSUSR002 without success.
By the way, what's the difference between "Group for Authorization" and "User Group (General)". My user groups appear in both.
Thanks in advance to help a security officer rookie.
Regards,
Julien

Hi julien,
Please have a look at BAPI_USER_GET_DETAIL. Its a function module so execute it using se37.
i.e., SE37->BAPI_USER_GET_DETAIL->EXECUTE.
Type the userId in the Username field (In Import Parameters), than execute. Expand LogonData (In export parameters), this would display the usergroup as well.
Please award points if it is useful.
Thanks & Regards,
Santosh

Improve Auto-Stack and Process Collections with user settings

I have read through all of the Bridge request discussions, and encountered a few comments on the stacking process but nothing to explain my critique and feature request. My apologies for any redundancy.
Bridge CS4 includes two features that would (virtually) streamline my entire photo-organization workflow. Brilliant! Except that they offer zero configuration and my default scenario is very different from Adobe's, so these two would-be-wonderful features are pretty much useless to me, and to anybody else who doesn't happen to shoot in the way the presets are configured.
The first feature is to automatically group images into stacks, based on their similarity, exposure settings, and timestamps. Unfortunately Bridge considers no minimum or maximum amount of photos per stack, and has a fixed timestamp window of 18 seconds. I shoot everything in three-exposure bursts and sometimes multiple shots in less than 18 seconds, so being able to say "process collections in 3-item stacks only" would be absolutely perfect. For other people, being able to limit the timestamp range or other min/max exposure options would work great.
The second feature, which could save me hours every week but is equally useless, is to automatically process collections in Photoshop. My biggest ire about this function is that it completely ignores stacks that I have manually created AND stacks that were previously created using the auto-stack feature. Every time this function is run, it re-runs the auto-stack process from scratch and then delivers the collections to Photoshop. Not only is this made useless by the previously mentioned inflexibility of the auto-stack process, but even if auto-stack worked perfectly, this would waste time by doing the entire thing again and denying the user the option to review the stacks before committing to the Photoshop processing. The process collections feature would also be much improved if the option were given to process ONLY panoramas or HDR photos, or auto-detect. I have never shot a panorama in my life and I'm sure plenty of people have never shot HDR, but Photoshop isn't capable of knowing our intentions and there's no reason why we shouldn't be able to instruct it.

Agree. It is an interesting capability that falls short of being really useful. I feel like an ingrate to complain, but ...
I'd also like to see the capability to specify something than "Auto" for the panorama option. My experience is that most of my panos work best with "Cylindrical + Geometric Correction".
My experience is that once you get past 5+ images in a pano, it becomes very tedious ... and then 20+ images in rows is painful. Unlike a single image that you can quickly evaluate, with panos I find I need to make the pano to tell if it going to turn out. I have been generating smaller 1800x1200 or 1200x1800 files to speed up the evaluation process, but it is still very manual and tedious.
The Auto-Stack generates a AutoCollectionCache.xml, but I haven't found it workable to edit this. I'd like to be able to modify it to "force" my knowledge of what is in a group. It seems to check the time-stamp, and re-do the Auto-Stack, thus ignoring my changes. Sigh.

SCCM 2012 Query to populate collection with users of 3 similar characters

Hi,
I'm trying to create a query to populate a collection for my QA users. I have 5 QA users and about 10,000 users on the domain. Those users are inside a "TQA" group so I just need to know a way to create a dynamic collection that will be populated
automatically with this TQA users and because of more people will be joining the ranks of QA testing the collection will help to mitigate maintenance.
At the moment we have a query that doesn't works at all so I had to manually update my collections every time we test a product. My query code does not seems to populate with the info I need.
This is the code:
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserPrincipalName = "TQA%" order by SMS_R_User.UserPrincipalName
Any thoughts ?
Kind Regards.

If you're using % in the value field the operator must be "Like" . In your case, the query should look like
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserPrincipalName Like
"TQA%" order by SMS_R_User.UserPrincipalName
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Deploy authenticate VPN using LDAP AD (with user group)

Hi,
I'm stucking in configuration of LDAP Server with authenticate for VPN user using group in Windows Domain. I would like to create a group like "vpn-group" in Domain. If someone want to vpn, I just have to add that user in the group "vpn-group" then I can connect to the company.
Here is my configuration
aaa new-model
aaa authentication login userauthen local group ldap
aaa authorization network groupauthor local
ldap attribute-map map1
map type sAMAccountName username
ldap server server1
ipv4 192.168.0.5
attribute map map1
bind authenticate root-dn cn=administrator,cn=users,dc=test,dc=local password 7 0235114B0E144E621518
base-dn cn=vpn-group,cn=users,dc=test,dc=local
Please advice me.

I got it working by including the AD security group in the search-filter
search-filter user-object-type User)(memberOf=CN=vpn-group,OU=Security groups,OU=company,DC=test,DC=local

SCCM Compliance Targeted to User Group Not Working

Due to the limitation in SCCM on working directly with DLs, I have found a work around that is posted in following blog
http://myitforum.com/myitforumwp/2012/02/11/collection-based-on-distribution-lists-2/
I tried to take this approach to deploy a compliance base line setting but it does not seem like doing anything. Its been nearly 2 days but the users in DL are not getting any settings. The DCM baseline is targeted to an AD security group that has DL as
its member.
Does anyone know if its never going to work or its now just waiting game? I have been waiting over 24 hours and logged on and off several times with user account but with no luck.

** Resolved **
I used following query which populated collection with users from desired DL and finally users got their DCM policy.
select SMS_R_USER.ResourceID,SMS_R_USER.ResourceType,SMS_R_USER.Name,SMS_R_USER.UniqueUserName,SMS_R_USER.WindowsNTDomain from SMS_R_User where SMS_R_User.UserGroupName like "%ConfigMgr_Compliance%"
Note: the DL is member of ConfigMgr_Compliance Security group.

User groups and permissions problem

Hello everyone,
I've been running Arch Linux for about a month now and I have noticed a few things related to permissions associated with user groups that annoy me. My user is part of the storage, wheel and network groups, amongst others. I can see this when I run the `groups` command. From what I could read on the Wiki, the storage group should allow me to mount/umount drives such as my USB key and my iPod when they are plugged in and access the files from my user account without using sudo. The network group should let me manage the network connection via ifconfig, iwconfig, etc. once again without using sudo.
However, when I run iwconfig as my normal user, I get incomplete and inaccurate information. I get about 2 lines telling me essentially that I am not associated with any Access Point, which I clearly am. When I run it with sudo, I get the full information, including my Access Point's ESSID. iwconfig does not get the same data when run with and without sudo. Same goes with ifconfig. Also, I can not run dhcpcd or wpa_supplicant at all as a normal user.
I get a similar problem with the storage group. I can not mount or umount drives without sudo and I can not write to mounted drives that I've mounted with sudo. This is particularly annoying when I try to manage my iPod.
Does anyone have a clue what could be causing this?
Thanks a lot

I have searched Google and the Arch Wiki, have tried a lot of the suggestions from the forums, such as the 'how I beat policykit and hal' forum post. Nothing seems to let me mount my drives. I can see them in Nautilus, I click them but they don't mount. I can do it as root. It's really frustrating because I can't figure it out. I haven't filed a bug report because I thought it was a problem that I was having.
I haven't tried the iwconfig or network yet.
This is pretty much the only thing holding me back from everything working.

Welcome to the new Oracle User Group Community

Welcome to the new Oracle User Group Community. Whether you landed here via the redirect from the previous community site - IOUC.org - or navigated here directly, welcome. This new platform brings new community features to enhance the way you connect with user group peers and with Oracle, as well as make it easier for you to find information through a more intuitive interface. We invite you to provide your feedback on the new site. Log in using your OTN Forum credentials and join the discussion here. If you do not yet have OTN Forum log in credentials, navigate to http://community.oracle.com/community, click on the "Register" link in the upper right corner of the page and create your account.
We look forward to hearing from you.

Hi Kashif,
Glad you like the new Community. Communication among user group leaders works a little differently on this site than on the previous site. Rather than having communication focus around e-mail distribution lists, communication now is focused within the site itself. The intent is that this will provide users the one place to come for information, rather than having to sort through lots of e-mail threads. That doesn't mean that e-mail is completely out of the picture though. Users can opt-in to receive e-mail notifications when an individual piece of content is changed, or when content is posted to a space. Look for the "Receive email notifications" link under "Actions" to start receiving notices. To stop receiving notices, go back to the same content/space and click "Stop email notifications".
Your Relationship Manager will be talking with you and the other leaders in your region over the next few days and weeks regarding how you and your group of leaders want to communicate.
Best regards,
Oracle User Group Team

New York Logic Pro Users Group – Meeting Announcement

_*New York Logic Pro Users Group – Meeting Announcement_*
The next meeting of the NY Logic Pro Users Group will be next Tuesday, October 21st, 6PM, at Dale Pro Audio in Manhattan.
Dale is located at 22 W. 19th St., Manhattan, NY.
This meeting will allow users to share their favorite tips and techniques in Logic, as well as their projects, with User Group members.
Jonathan and Steve will cover special topics, in particular how to deal with manage and synchronize multiple cues when scoring to picture.
The local NYC Apple Store's Logic guru will be in attendance as well.
If you plan on attending, and haven't done so already, please RSVP to [email protected]
*NYLPUG is brought to you by Mac Audio Trainers.*

I can't say enough good things about Redmatica, and Andrea in particular.
I've found and reported a handful of issues I found in Keymap, and in each case I had the issue confirmed, and a new build sent to me at most within a couple of days, often much sooner, with the issue fixed. If only Apple were more like that...
Keymap is a stunning piece of software that, in conjunction with Logic (or other soft samplers) make creating sampled instrument content (almost) a pleasure.
Have a good one - do you video these sessions for people who can't attend..?

Problem with users accessing sharepoint 2013 site collection

I have an unbeliveable problem..
I have a sp site with several site collections..
I have around 15 users.. Everybody have access to the root site. Two users do not have access to site collections even though they are in EXACTLY same permission groups like other users who can access those site collections!
I tried to delete them from all user groups in SP, then delete their user profiles in Central Administration, and delete them from Active Directory. After that I recreated their profiles in Active directory, readded them to Central Administration, and again
added them to coresponding groups in SharePoint site collections. They again CAN NOT ACCESS site collections.
What should I do.. This is incredible that 5 users with the same user privileges can access site collections, and 2 can not, even though they are all created in the same way..
Regards,
Srdjan

Hello,
Have you found a solution for this problem? I have the exact same problem with 2 users accessing a site collection (access denied). I found also this row on uls log:
Access Denied. Exception: Attempted to perform an unauthorized operation., StackTrace:   at Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(Exception ex)     at Microsoft.Office.Project.PWA.PJBaseWebPartPage.OnPreInit(EventArgs
e)     at System.Web.UI.Page.PerformPreInit()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionSt... 6955b79c-c42c-50fc-84f8-2b68f97002ea

Assignments to collection with user groups seems to be failing

Similar Messages

Maybe you are looking for