Assingment of Internal Number Range to different type of Maintenance Order

Hi..
We are implementing SAP Plant Maintenance. We have created 10 order type. We want to assign 10 number ranges to the order types. During "Configuring of Number Range" t.code OION , when I am inserting new groups for all 10 type of order, it is not accepting by the group name. Number range which i am giving to the desired group is saved in other groups.
Can anybody help to adopt the right process sothat I can assign the correct internal number range to different order types.
Thanks in advance.
Regards
TP

Hi Pramod,
               Please follow the procedure mentioned below:
              Configure number ranges.
              1. In the menu bar go to Group & Insert
              2. Enter the Text & the interval i.e number range.
              3. Now add the new group using the symbol ( + )
              4. once this is done the new group will be reflected.
              5. Then select the element ( order type) i.e to be assigned using F2 key.
              6. Enable the check box against the new group ( respective group)
              7. Now in the menu bar press Element/Group tab ( or Use F5 key)
              8. The selected element(order type) will be assigned to the particular group that you have
                  selected.
              Hope this will help you resolve the problem.
Thnaks & Regards
Arun Vijay D

Similar Messages

SALES ORDER INTERNAL NUMBER RANGE

Hi friends,
I have a problem with Sales Order Number Range with Doc Type SO(Standard Order) its about internal number range OBJECT ASSIGNED in document type is 01
In VN01 for object 01 range assigned is from 01 to 999999 & current number range is 976832 which is about to finish ,
Help me in this regards what r the steps involved in this as while saving order its already showing a warning error that number range is about to finish your earlier help will be appreciated & rewarded.
Regards

System will not allow overlaping of number range. As the number range is nearing to end of redefined, followinwing are the options:
Option 1:
Set number range for number range object 01 is 01 to 999999 . Check if the number range starting from 1000000 is free or already being used. If it is free & that number range is not being used else where, you can reduce the number range in it say number range object 02 is assigned number range from 1000000 to 1999999, you amend the number range to 1500000 to 1999999 & extend the number range fornumber range object 01 as 01 to 1499999.
Option 2:
If the following number range is in use, go to VOV8 --> select the Sales Document Type SO --> change number range object say 01 to say A1 & transport the same from Development to Test (QA) & then to Production Server. In the next step step maintain new number range (not overlaping) to say A1, number range being 10000000 to 19999999. The imapct of transporting the reauest of VOV8 transaction will be that you will have to maintain the new number range immediately & from very next Sales order, the new number range will be active.
Hope this is useful input for you.
Regards,
Rajesh Banka
Reward point if helpful.

Lsmw - Internal number range

Dear Gurus,
I have an issue with LSMW.
Initially for our client, we used to generate material codes with Exernal number ranges.
Now, the client needs internal number ranges for the material (ROH) created.
I removed the Filed MATNR (material number) from the list in "Maintain Source fields".
And in "Maintain Field Mapping and Conversion Rules", i made MATNR as initial. After running the LSMW, i am getting the material code as !000000.
please advice.
Thanks in advance.
SGS

1.Maintain internal number range to material type ROH - MMNR
2.USe LSMW direct input method (not recording method)
Refer this link for moreinfo http://wiki.sdn.sap.com/wiki/display/ABAP/LSMW
In the Bottom you could see useful link go to that website saptechnicaldotcom and learn all the methods available for materil master load

Number range for different order types

hi
pl tell me how to create the number ranges for production order s and how to assign this number ranges to different order types in production server.
thanks and regards

Dear ,
Goto CO82 ,
1.Frist you should review in the Overview Screen (Hit the Orview in CO82) wether you have option to create the group as per required number ranges for two order type
2.Hit the Pencil Button of the Group : It will take you "Maintain Number Ranges Group" and Select Group on the top -
Insert.It will pop up with Inser Group Window .Enter the Text , Enter Number Ranges (From no /To No) and then hot the insert button (+ sign) .You have to create two number ranges group as per your requirement
3.Now select you order type and hit the Select Eelement (Nip symbol) , select the resepctive group , then Hit Element/Group Tab .Once you follow this steps , you will find your Oredr type assigned to respective number ranges group.
4.To cross check , you select the number ranges group and hit the Spec button to see the correct number ranges .
5.MAKE SURE THAT YOU HAVE ORDER TYPE CREATED BEFORE YOU CREATE THEIR NUMBER RANGES -OPJH
Revery back if u need any help
Regards
JH

Diiferenet Internal Number Ranges by Depot(Plant) wise

Hi Experts,
I have a requirement in SD for Different Internal Number ranges by Depot(plant wise.
For example, my client having 8 depots(Plants). For each Depot client need different number range, means for depot 1 client need one range that is 9000 to 10000. For depot 2 client need number range like 10001 to 20000 like this for 8 depots but document type(sales order, billing, delivery, invoice) is same for 8 depots. How can i achieve this?
As I am fresher I am not getting any clue. If any one did this please provide me the details how to achieve this.
Thanks & Regards,
Muralikrishna
Moderator Message: Do some R&D of your own first.
Edited by: kishan P on Nov 15, 2010 2:24 PM

Hi Gnana Kumar,
I seen this link, here mentioned that develop the z table with fields like VKORG, FKART, NUMKI. Can I add Depot(plant) filed also?
and here client is having only one Sales Organization.
Thanks & Regards,
Muralikrishna

Different Number range for different objects

HI Gurus
Could you please explain how can we make different Number range for different objects(O,S,P).Can we do with standards or we can go for UserExit??.
Your early Advise will be appreciated.
Thanks
Chandra

Hi Chandra,
SM31 -> T77IV : 01S -> Number Range Maintenance.
(or SPRO -> Pers Man -> Org Man -> Basic Settings -> Maintain Number Ranges)
For the subgroups
01C (plan variant 01, Object type C) Job
01O (plan variant 01, Object type O) Org unit
01S (plan variant 01, Object type S) Position
Define the following number ranges respectively.
(EX 60000000 69999999)
(EX 70000000 79999999)
(EX 80000000 89999999)
Regards,
Dilek

Number range for document types

Hi everyone,
I want to have anumber range 3200000000----3299999999 for my PO document type ZEOH which is a copy of NB. The number range for NB starts with 45. Now when i am inserting the 32 series & than assigning to the doc type ZEOH system is giving error " insert valid intrernal number range". Please suggest what internal number range can i use or how to use the 32 series.
Thanks

Dear John,
Check if you have maintained proper entries in:
ItmInt - Item Number Interval
NoRgeInt - Number Range Internal
You should be able to save without any errors.
Also, are you able to see the number range in the F4 help for ItmInt.
Regards,
Naveen.

Defining Internal Number Ranges

Hi,
I am looking for a good solution for internal number ranges generation in MDM, I haven't find any solution for this number ranges in any of SAP MDM ref. guides and any other SAP standard documentation.
Business requirement:
1)Based on Account Group we have different internal number ranges for Business Partner.
2)Once the user select a Acct. Grp for Business Partner in MDM corresponding sequential number range should generate and assign to that BP.
3) the solution should work in both Data manager and in Portal.
Appreciate all valid suggestions and helpful answers.
Thanks,
Pooja Varma

Hi Anita,
I am not looking for Remote System key generation.
I need a solution for the internal number range generation for any new BP or Material creation within MDM and there is no data model provided by standard SAP MDM on this.
- I am wondering how all other clients are implementing this kind of requirement?
- this is very crucial and important for any client in the BP.
Hi All,
Kindly share some of your experiences and provide solution in this regard.
Highly appreciated all helpful answers and suggestions.
-Full Points will be given all valid answers.
Regards, Pooja

External number range for Billing type

Hi
In standard we can only enter internal number range. Is it possible to enter external number and assign it to billing type.
Regards
Debasish

Hi
Please reward the points if you feel this answer help ful for you.
Go to transaction snro. in that maintain number ranges what eve you want and mark as extenernal in that after that go to vofa in that select the tab as number range inter assingmeent in that assingn your number range what you assign in that.
Please reward help ful
Thanks & Regards
rack29

To swap internal number range with an External number range

Hi SAP Guru's,
We have a a landscape with SAP which is divided in 2 ERP's.
One being the Central server and other the Local.
The scenario is that when ever i create a maintenance order in the central server a replication should happen in the local server and the order number should be same as that of central server.
And the scenario should be Vice versa i.e whenever the order is created in a local server it should be replicated in the central.
Both the number ranges used in central and local server are different.
I am not able to find out how we can achieve the above stated scenario.
Please advice what should be my POA.
Regards,
Ankit

Hi ,
1.You have to find the Difference that Wether the order is created using Integration or Manually from the System.
2.The Standard SAP uses Function Module Number_get_next or Badi to fetch the Number and the number is assigned to Order.
Thats how the internal number ranges works .
3.Now your Scenario is to Owerite the Original number given by system by the function module or BADI .
4.Now you find that Plug in Point and Write an Implicit enhancment Point and Owerite the Original value given by System.
So then only you can Owerite the Original Value.
Let me know if you are not clear .
Regards,
Kishor

Me_process_po_cust badi for generating internal number range in me21n tcode

Hi all,
I have requirement while creating purchase order my client want to generate internal number range based on company code,document type and plant.here, we are making one custom table to hold compny code,plant,doc.type and Number range number.I am using me_process_po_cust badi for the same.I got the po header and item data from this badi.my problem is how i can pass this number range number in me21n to respective fields.
Regards,
Sleela Patil

Hi,
Thank u both of you..I tried that exit.following is the code I have written for that exit.
TABLES: T001K,NRIV,EKKO,ZVS_MM_RANGE.
DATA: WA_TAB TYPE ZVS_MM_RANGE,
      WERKS LIKE T001W-WERKS.
GET PARAMETER ID 'WRK' FIELD WERKS.
SELECT SINGLE * FROM T001K
                WHERE BUKRS EQ NEKKO-BUKRS.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM ZVS_MM_RANGE
                  INTO WA_TAB
                  WHERE BUKRS EQ NEKKO-BUKRS
                  AND WERKS EQ WERKS    "T001K-BWKEY
                  AND BSART EQ NEKKO-BSART.
IF SY-SUBRC EQ 0.
    MOVE: NEKKO-EBELN TO NUMBER,
          WA_TAB-NRRANGENR TO RANGE.
ELSE.
    MESSAGE 'Please maintain Number range in table zvs_mm_range' TYPE 'E'.
ENDIF.
ENDIF.
Here, I am getting data as I needed but problem is client having multiple plant for single company code.I am not able to capture plant in this exit.as, it is in item level.so,later on tried to do it using me_process_po_cust badi.
Now my problem is that how to pass this number range number in me23n tansaction.
Regards,
Sheela Patil

Wrong internal order number for internal number range

Hi,
I have created an internal order type and assigned the internal number range 450000-459999. When we checked the numbers given for the system there are missing numbers. For example; the numbering is OK up to 450013 numbered order and the next order has 450020 number, and next one has the 450040
number.
I checked the COAS table and there are no number used by any other order. What can be the reason for this situation? How can we fix the problem? Is there any one who face the same problem?
What are your suggesitions...
Thanks in advance
Ahmet

Hi,
I have similar kind of query. How to use the numbers that the system jumped? Is there any record/history of unused numbers present in any table? Thanks in Advance!
Regards,
Nidhi

Can we use same number range for different fields

can we use same number range for different fields. how can we see the number range defined for a particular field

Hai,
Yes you can have same number range for different fields by using the same domain to the data elements that are user to your two fields.
To see the range:
Go to SE11,Type table Name open it-->double click on the DataElement adjasent to the field name ,You will get Domian ,Double click on Domain You will get Domain.There See Value range option .Value range cam also be defined by Value Table which will also at the Doamin level.
Reward points if it helps you.
Regds,
Rama.Pammi

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Create vendor in ERP R/3 with internal number range

HI,
When I create a new vendor from MDM in R/3 with internal number range ADRMAS is processed OK but CREMDM is in status 51 because of missing address data.
According to sap note 1052964 (se below) ADRMAS must be the first IDOC and it should contain the vendor number, but this is not possible with internal number range. How do you overcome this problem and how do I get the vendor number back to MDM?
ALE inbound needs the customer / vendor account number within the ADRMAS IDoc to link the ADRMAS IDoc to the follwing DEBMAS / CREMAS IDoc correctly. Therefore field <OBJ_ID> in ADRMAS segment <E1ADRMAS> must contain exactly the same value as fields <KUNNR> / <LIFNR> in the corresponding DEBMAS / CREMAS IDoc. If this value is not provided, the Business Address Service stores the address but is unable to link the address later on to the corresponding Customer / Vendor.
Kind regards
Jonna

We have worked around these problems in the past. These are the steps we took:
1. We created a custom program to process a CREMDM IDOC. This custom program was pretty simple. It called the function module to process a CREMAS IDOC (IDOC_INPUT_CREDITOR) then did a committ. The program captured the vendor number and then called the function module (IDOC_INPUT_ADRMAS) that processes an ADRMAS IDOC (It plugged in the previously captured Vendor number in the ADRMAS).
2. Using this custom program, it is not necessary in PI to split the CREMDM into a CREMAS and an ADRMAS.
3. The last step in the custom program kicked off transaction MDMV to trigger an outbound CREMDM IDOC back to MDM. This was necessary to update the vendor number in MDM.
Tom Belcher

Assingment of Internal Number Range to different type of Maintenance Order

Similar Messages

Maybe you are looking for