At the time of creation of POaccount assignment is coming mandatory

Dear all;
At the time of creation of PO system showing the msg that the  account assignment is mandatory for the material ,how to overcome this?
Kindly suggest whre in material master record I can change settings for account assingment ,or the control is somewhere else.
Regards;
Joydeep Mukherjee

Hi
In OMS2 t-code
for your material type and  plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Similar Messages

  • Issue at the time of creation of transfer order for inbound delivery

    Hello,
    I am facing one issue at the time of creation of transfer order for inbound delivery.
    If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
    If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
    Thanks and Regards,
    Nikhil

    Hi
    In OMS2 t-code
    for your material type and  plant ,you have to mark value based and qunaity based updation mark
    Regards
    kailas Ugale

  • Different batch no in prod order at the time of creation of prod order

    Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

    Dear,
    Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
    Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
    Refer this thread,
    Re: Batch creation
    Please try and revert back.
    Regards,
    R.Brahmankar

  • Alert message is needed at the time of creation ,if it reaches ,the maximu

    DEAR SA EXPERTS,
    Can you please me that alert message is needed at the time of creation ,if it reaches ,the maximum stock level (Stock+level)
    Thanks
    Mohit

    Hi,
    Please refer the below links.
    Alert Message
    Re: Alert Message
    Hope it helps you.
    Thanks.

  • Problem at the time of creation order

    Dear Gurus,
    facing update termination error at the time of creation/change the sales order..in development system
    after some analysis,  found one more error due to which above mention error is coming
    report run : "RMCSUTIC" : check utility logistic info system
    after running this report system giving error message "Unit O2 : No DDIC Information for source field OI0BW_ADQN - OIMSEHI1"
    but when but in production server it's working fine without error message
    kindly suggest some solution for the same
    Regards,

    No DDIC Information for source field
    You may have to check the following notes.  Take the help of your basis team.
    1)  542872
    2)  557683
    3)  579022
    4)  645136
    thanks
    G. Lakshmipathi

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Default Header text comes in PO at the time of creation

    Hi Friends,
                   my problem is that a default Header text must come on the PO based on the user or purchasing group at the time Creation (In Transaction ME21N).
    Is there any user exits or badi for it. I have already searched for them but i have not got any thing. Please help me.
    Thanks for ur valuable answers

    yes i know that through copy control we can get default text but it is item level text instead of the header text.and other thing it does not depend on the user or purchasing group. I default header text that is populated imediately when user call ME21N. So is there any BADI or user exit for that.Please reply.
    Thanks for ur reply and valuable answers
    null

  • PROBLEM AT THE TIME OF CREATION OF VALUATION TYPE(SPLIT VALUATION)

    Dear cons
      I want to create a valuation type ( t-code- OMWC) in configuration client. Then I will transport to quality as well as production. but it is a matter of great regret that at the time creation of valuation type no transport request no. is genereted. without TRansport request no. how can I transport to quality as well as production. pl. help me.
    nrk

    Hi,
    This is a client level configuration so Transport Requests are not getting generated directly. Here follow this procedure;
    Go to OMWC, Click on Global types. , Click on Types > Transport in the menu bar
    The sytem will prompt for a request, create the request. A new screen for selcection of Valuation cateogires & valuation types will come. You can select here & transport.
    Click on Save after selection, all the selcted items will be added to the request

  • Ship to record not populated in the CDHDR table at the time of creation

    HI
    I have created the Ship to party in R/3 and automatically i couldnt found the customer number entry with Change object as " I " in the table CDHDR. but ideally all the master data creation entries will be written in the CDHDR table with " I ".
    Please help me out here.
    Helpful answers will be rewarded.
    Regards,
    Ram.

    In that case, try maintaining only the dates in that table and execute.  Once the data is populated, ensure that transaction code is XD01 and not XD02.  Moreover, I am not sure, system will show the creation time there.  May be you can try in KNA1 where also, you can see the creation date but not time.
    As an alternative, execute XD02 for that ship to party where from top menu bar, click on Environment => Account changes => All fields.  Again double click on "Entries", so that system will display the creation and changes made to that customer with date.  Double click on the first record so that system will show when that particular activity was taken place and at what time.
    thanks
    G. Lakshmipathi

  • Automatic creation of BP relationship at the time of creation of BP

    When a user creates a new account using BP transaction we need to create a 'Has the responsible employee' relationship automatically. If we try to create the same on save ( Using function BUPR_RELATIONSHIP_CREATE in BAdI PARTNER_UPDATE ) it doesn't work as the account would not have got created at the time of save. Hence we took a different approach of trying to create the relationship when the user clicks on 'Relationship' button ( in portal it is 'Relationship' tab ). We couldn't find a suitable BAdI which would contain the details of the recently created account as its import parameter.  Is there any other approach we could use to solve this issue? Please let me know your ideas on the same.

    Hi,
    You can implement this functionality using the BDT.
    --> in the PAI event, update the relationships in memory using function BUB_BUPA_RELATIONS_MODIFY.
    For BDT use, take a look at the following thread:
    Re: How do I update custom fields in a partner when I save the record?
    Michael.

  • Problen in assigning partner function at the time of creation of lead .

    Hi ALL ,
              I have requirement , where as soon as bp will be created a lead has to be generated mentioning the BP as sales prospect (partner function) . I have to assign  employee reponsible partner  function too in lead , at the same time .
    I have used BAPI :BAPI  BAPI_LEAD_CREATEMULTI  to create the lead .
    But its not accepting the partner function as well as organisation details , giving error like Ref field for  Partner ,Orgman are not allowed.
    Can any one tell me where and how can I assign the Partner function in case of my reuirement .
    Thanks & Regards
    Debasri sarkar

    Hi Debasri,
    I am able to develop a code to add a partner
    Check this:
    *- Data
      DATA: lt_partner            TYPE crmt_partner_comt.
      DATA: ls_partner            TYPE crmt_partner_com.
      DATA: lt_input_fields       TYPE CRMT_INPUT_FIELD_TAB.
      DATA: ls_input_fields       LIKE LINE OF lt_input_fields.
      DATA: ls_input_fields_names TYPE LINE OF CRMT_INPUT_FIELD_NAMES_TAB.
      DATA: LV_Guid type CRMT_OBJECT_GUID.
      DATA: LV_AddPartner type NOTES-UDATE.
      DATA : lt_orderadm_h TYPE CRMT_ORDERADM_H_COMT,
             ls_orderadm_h like line of lt_orderadm_h,
             gt_obj_guids TYPE  crmt_object_guid_tab.
       LV_Guid = '96CB40512AA2BD4C95EEE26BFD8E6187'.
       LV_AddPartner = '00000012'.
    *- Partner info
      ls_partner-ref_kind = 'A'.
      ls_partner-kind_of_entry = 'C'.
      ls_partner-no_type = 'BP'.
      ls_partner-display_type = 'BP'.
      ls_partner-ref_guid = LV_Guid.
      ls_partner-ref_partner_fct = LV_AddPartner.
      ls_partner-partner_fct = LV_AddPartner.
      ls_partner-PARTNER_NO = '0000409993'.
      INSERT ls_partner INTO TABLE lt_partner.
    *- Input Fields info
    *  ls_input_fields-ref_handle = '1'.
      ls_input_fields-ref_guid = LV_Guid.
      ls_input_fields-ref_kind = 'A'.
      ls_input_fields-objectname = 'PARTNER'.
      CONCATENATE ls_partner-ref_partner_handle LV_AddPartner
                  INTO ls_input_fields-logical_key.
      ls_input_fields_names-fieldname = 'PARTNER_FCT'.
      INSERT ls_input_fields_names INTO TABLE ls_input_fields-field_names.
      ls_input_fields_names-fieldname = 'NO_TYPE'.
      INSERT ls_input_fields_names INTO TABLE ls_input_fields-field_names.
      ls_input_fields_names-fieldname = 'DISPLAY_TYPE'.
      INSERT ls_input_fields_names INTO TABLE ls_input_fields-field_names.
      ls_input_fields_names-fieldname = 'PARTNER_NO'.
      INSERT ls_input_fields_names INTO TABLE ls_input_fields-field_names.
      ls_input_fields_names-fieldname = 'KIND_OF_ENTRY'.
      INSERT ls_input_fields_names INTO TABLE ls_input_fields-field_names.
      INSERT ls_input_fields INTO TABLE lt_input_fields.
    *- Make the changes in memory
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        EXPORTING
          IT_PARTNER        = lt_partner
        CHANGING
          ct_orderadm_h     = lt_orderadm_h
          CT_INPUT_FIELDS   = lt_input_fields
        EXCEPTIONS
          ERROR_OCCURRED    = 1
          DOCUMENT_LOCKED   = 2
          NO_CHANGE_ALLOWED = 3
          NO_AUTHORITY      = 4
          OTHERS            = 5.
      IF SY-SUBRC <> 0.
          Write 'Error!'.
      ENDIF.
    * Get guids
      LOOP AT lt_orderadm_h INTO ls_orderadm_h.
        INSERT ls_orderadm_h-GUID INTO TABLE gt_obj_guids.
      ENDLOOP.
      CALL FUNCTION 'CRM_ORDER_SAVE'
        EXPORTING
          it_objects_to_save = gt_obj_guids
        EXCEPTIONS
          document_not_saved = 1.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    Hope this solves the issue.
    Regards,
    Saumya

  • BED(14%) not appearing at the time of creation of Export Sales Excise Inv

    Dear All,
    While creation of excise invoice for export sales the BED(14%) is not appearing in the excise invoice however Sec Cess (2%)and Higher Sec cess (1%) are appearing.
    If I create an excise invoice for normal sales then all the 3 Values are coming please suggest what needs to be done with regards to my excise invoice for export sales.
    Best Regards
    Atul Keshav.

    Dear Atul,
       Go to tax on good movement, - basic setting - default excise conditions for you procedure ie taxinn or taxinj - maintain your jexp or jex2. same way check your excise group - series group setting and also your delivery and billing condition types for export in taxon goods movement.
    regards,
    Sudhir
    Edited by: Sudhir Nair(India) on Nov 21, 2008 12:08 PM

  • Automatic creation of AUC (CWIP Asset) at the time of creation of IO

    Hello Gurus,
    When iam creating an investment internal order, system is not creating AUC(CWIP Asset),  I have created investment profile and entered the same in internal order, what could be the reason for this.
    Please let me know the missing configuration.
    Thanks & Regards,
    Kapoor

    Have you made the following settings:
    Investment profile:
    Sim. asset class xxxx
    Indent value
    OAYZ Determine Depreciation Areas in the Asset Class   assigned the default value to the asset clas for AUC.
    In the most cases the AUC is created when you release the internal order

  • ATP Check at the time of creation of Opportunity.

    Dear Friends,
    We have a business requirement in which we are supposed to perform the ATP check @opportunity level. When we are trying to assign the ATP Profile to the Item Category OPPT, the ATP profile is not available for opportunity. there is a FM "CRM_ITEM_TYPE_FIELDCHECK_CB" which is responsible for hiding the   ATP Profile field for opportunity "OPPT" Line Item.
    I have update the ATP Profile for opportunity in the Maintenance View "CRMV_ITEM_TYPE"
    I have implemented the 2 Badi's also CRM_ATP_EXTERN_BADI & CRM_ATP_EX_POST_BADI but none of the implementation is being getting called in case of opportunity.
    But when i am creating Quotation the above BADI's are being getting called.
    And moreover, the Availability Check for ATP in customization there is no RFC system maintained neither the Control Information.
    But I am confused, why in case of Quotation the BADI's are getting Triggered and why not in Case of Opportunity.
    Please Advise me on the above and if I am missing something or if there is any alternative for ATP at OPPT level.
    Your answer will be rewarded
    Thanks in Advance,
    Kind Regards,
    Ashraf.

    Hi Ashraf,
    The reason is that ATP is run only for transaction type of category SALES ( BUS2000115 ) but opportunity is a different category. The only possibility you have left over here is to enhance the Event framework in CRM through tcode CRMV_EVENT.
    Add these entries and see if it works, since there are a lot of checks so for beginning you can add these events in tcode CRMV_EVENT.
    ORDERADM_I
    AFTER_CHANGE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    K
    ORDERADM_I
    AFTER_CREATE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    K
    ORDERADM_I
    AFTER_DELETE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    A
    ORDERADM_I
    BEFORE_DELETE
    <*>
    CRM_ATP
    CRM_SOURCE_DELETE_ITM_CHECK_EC
    PRODUCT_I
    AFTER_CHANGE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    PRODUCT_I
    AFTER_CREATE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN
    AFTER_CHANGE
    DLV_GROUP
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN
    AFTER_CHANGE
    ORDER
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN
    AFTER_CHANGE
    ORDER
    CRM_ATP
    CRM_KIT_SCHEDLIN_CHN_EC
    SCHEDLIN
    AFTER_CREATE
    DLV_GROUP
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN
    AFTER_CREATE
    ORDER
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN
    AFTER_DELETE
    ORDER
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    SCHEDLIN_I
    AFTER_CHANGE
    <*>
    CRM_ATP
    CRM_CONFIRM_ADD_ITEM_EC
    K
    /Hasan

  • Restrict process oder type at the time of creation

    Hello SAP Gurus,
    For one material type i am using PI05,PI06,PI09 order type. My requirment is system should restrict user in COR1 & COR7 transaction for order type PI01 only. How can we do that? Please suggest. Right now sysytem allowing PI01 for that material because we have assigned order type on plant leval.
    regards,

    Dear ,
    1.You need to goto CO82-Define Number Ranges -Select PI01 which will be in Internal Number Ranges  -Remove this order type to Not Assinged  at the bottom
    2.Create an screen variant , SMOD-C0r1/C0r7  by appliying the User Exit
        1.ATP_PUBLISH_RESULTS
        2.PPCO0005 Storage location/backflushing when order is created
       3.PPCO0006 Enhancement to specify defaults for fields in order header
       4.PPCO0007 Exit when saving production order
    3.Change the Manula selrtion of order type in OPPQ or OPPR rather automatic selection
    Try and check
    Regards
    JH
    Edited by: Jiaul Haque on Jun 26, 2010 11:25 AM

Maybe you are looking for