Ata 4.01 Failed to resume link (SControl 0)

::Loading initramfs
::Startx udevd
ata 4.01 Failed to resume link (SControl 0)
These are the starting 3 lines of my boot process. I am not facing any problems but want to know why is the link failing to resume. I understand that this is with respect to the SATA link. Can anyone explain?

Not a problem, it's just a warning.
I have that on my old dell when the SATA BIOS setting is set to IDE i.o. AHCI iirc (which I have to left unchanged due to the dual boot with windoze which doesn't boot in AHCI).
Anyway, it looks like a patch might come http://permalink.gmane.org/gmane.linux.ide/49813

Similar Messages

The server failed to resume the transaction. Desc:d200000003.

Hi,
We recently migrated our application from SQL Server 2000 to SQL Server 2005 and we also migrated from WAS5 to WAS6.
We are getting the following exception when we call any of the stored procedures.
The server failed to resume the transaction. Desc:d200000003.
I guess this is the problem with the drivers.We use JDBC 2005 driver Version 1.1.
But we didnt face this problems when we use JDBC 2000 driver when we used to connect to SQL Server 2000
The Microsoft says that it has fixed the date problems as well as the transaction problems in the version 1.1.But still are facing the issues.
Can anyone of you please help me in getting the solution for the same?

This appears to be an error message which has it roots in MS DTC, Microsoft Distributed Transaction Coordinator.
This indicates that you somewhere manage to get a distributed transaction. This could be because of two things:
1) There are triggers on the tables that accesses linked server.
2) Your client code dabbles with some transaction class, like TransactionScope or similar.
Erland Sommarskog, SQL Server MVP, [email protected]

The server failed to resume the transaction. Desc:4500000006

I am calling single store procedure from asp.net C# which basically insert/update data in two different tables. I am using SQL transaction in store procedure.
I am getting exception
THE SERVER FAILED TO RESUME THE TRANSACTION, DESC:4500000006. THE TRANSACTION ACTIVE IN THIS SESSION HAS BEEN COMMITTED OR ABORTED BY ANOTHER SESSION.
Exception which I get its not frequent messsage.
Any Idea!!!!
ALTER PROCEDURE [dbo].[ssp_UpdateActivity]
@ActivityID uniqueidentifier,
@MasterCustomerID bigint = NULL,
@MasterCustomerAccountNumber varchar(30) = NULL,
@MasterIdentifier varchar(30) = NULL,
@UpdateDateTime datetime,
@UpdateBy varchar(100),
@ActivitySDRecord dbo.ActivitySDRecord READONLY
AS
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRAN
UPDATE Activity
SET MasterCustomerID = @MasterCustomerID,
MasterCustomerAccountNumber = @MasterCustomerAccountNumber,
MasterIdentifier = @MasterIdentifier,
UpdateDateTime = @UpdateDateTime,
UpdateBy = @UpdateBy
WHERE ActivityID = @ActivityID
IF EXISTS (SELECT * FROM @ActivitySDRecord)
BEGIN
MERGE ActivitySubDisposition AS TRG
USING @ActivitySDRecord AS SRC
ON TRG.ActivityID = SRC.ActivityID
AND TRG.ActivityTypeID = SRC.ActivityTypeID
WHEN NOT MATCHED BY TARGET THEN
INSERT (ActivityTypeID, ActivityID)
VALUES (SRC.ActivityTypeID, SRC.ActivityID)
END
COMMIT TRAN
SELECT @ActivityID
END TRY
BEGIN CATCH
-- Rollback any uncommited transactions before rethrowing the error.
IF XACT_STATE() <> 0
BEGIN
ROLLBACK TRANSACTION;
END
DECLARE @ErrorMessage NVARCHAR(4000)
, @ErrorNumber INT = ERROR_NUMBER()
, @ErrorSeverity INT = ERROR_SEVERITY()
, @ErrorState INT = ERROR_STATE()
, @ErrorLine INT = ERROR_LINE()
, @ErrorProcedure NVARCHAR(200) = ISNULL(ERROR_PROCEDURE(), '-');
-- Build the message string that will contain original error information.
SET @ErrorMessage = N'Error %d, Level %d, State %d, Procedure %s, Line %d, ' + 'Message: '+ ERROR_MESSAGE();
-- Raise an error: msg_str parameter of RAISERROR will contain the original error information.
RAISERROR
@ErrorMessage,
@ErrorSeverity,
1,
@ErrorNumber, -- parameter: original error number.
@ErrorSeverity, -- parameter: original error severity.
@ErrorState, -- parameter: original error state.
@ErrorProcedure, -- parameter: original error procedure name.
@ErrorLine -- parameter: original error line number.
END CATCH

This appears to be an error message which has it roots in MS DTC, Microsoft Distributed Transaction Coordinator.
This indicates that you somewhere manage to get a distributed transaction. This could be because of two things:
1) There are triggers on the tables that accesses linked server.
2) Your client code dabbles with some transaction class, like TransactionScope or similar.
Erland Sommarskog, SQL Server MVP, [email protected]

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

The SMB client failed to resume a handle on a file share with continuous availability

Hi.
We have a 2-node WS2012 cluster that has a file server role with couple shares configured.
We're however constantly getting spammed by the following errors in the eventlog:
1) event 1002, source: SmbServer, message: "RKF failure - SRV2 failed to get acknowledgement from Resume Key filter for persistent handle request."
2) SCOM has an alert opened with this description: "SMB client failed to resume Continuously Available (CA) handle as Resume Key Filter is not acknowledging the handle." Per the alert knowledge, we've inspected ResumeKeyFilter eventlog, but it
contains only informational message and warnings and none of those are from the time the alert was created.

Hi,<o:p></o:p>
Please try applying the following hotfixes.<o:p></o:p>
Update that improves cloud service provider resiliency in Windows Server 2012<o:p></o:p>
http://support.microsoft.com/kb/2870270
<o:p></o:p>
Physical Disk resource move during the backup of a Cluster Shared Volume (CSV) may cause resource outage<o:p></o:p>
http://support.microsoft.com/kb/2869923
<o:p></o:p>
Can't access a resource that is hosted on a Windows 8 or Windows Server 2012-based failover cluster<o:p></o:p>
http://support.microsoft.com/kb/2838043
<o:p></o:p>
Best regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

DAG Cluster Failed to Resume Primary Active Manager

Hi there,
I ran the StartDagServerMaintenance.ps1 script on our SiteA Exchange server then updated it and rebooted. SiteB Exchange server now has active Mailbox Database and is doing Client Access etc. After reboot of SiteA Exchange we had network issues and in the
process of troubleshooting I deleted the network adapters from Device Manager, and ran netsh int ip reset, then reconfigured them with their static IP's, and static routes for the Replication network.
Site A MAPI Network - 192.168.1.0/24
Site B MAPI Network - 192.168.2.0/24
Site A Replication Network - 10.10.1.0/24
Site B Replication Network - 10.10.2.0/24
Each site has one Exchange Server running all Roles and is in DAC Mode, on Exchange 2010 SP2.
Right now I cannot run the StopDagServerMaintenance.ps1 script because it says
Failed to resume the ability of the server SiteA-EX1 to host the Primary Active Manager, 'cluster.exe /cluster:SiteA-EX1 node SiteA-EX1 /resume' returned 5050.
In the EMC, Organization-Mailbox-DAG Networks, DagNetwork03 and DagNetwork04 say subnet 192.168.1.0/24 and 10.10.1.0/24 are Down and Unavailable.
In Failover Cluster Manager, Cluster Network 3 and Cluster Network 4 are in Status: Down.
I can ping all the subnets and Exchange IP addresses from both Exchange server.
SiteA Database copy is Healthy and no copy count. SiteB is Mounted.
EDIT: Networks are all up, question now is how do I move the PAM to the SiteA?
I tried this command:
Cluster.exe DAG1 group "Cluster Group" /moveto:SiteA-EX1
I get System error 5012 has occurred
The cluster group cannot be found.
The AlternateWitnessShareInUse is the alternate in SiteB.
When I run the command "cluster group" I get this:
Group Node
Status
Cluster Group SiteB-EX1
Online
Available Storage SiteB-EX1
Offline
I dont see the Node for SiteB.

I tried this command:
Cluster.exe DAG1 group "Cluster Group" /moveto:SiteA-EX1
I get System error 5012 has occurred
The cluster group cannot be found.
The AlternateWitnessShareInUse is the alternate in SiteB.
When I run the command "cluster group" I get this:
Group Node
Status
Cluster Group SiteB-EX1
Online
Available Storage SiteB-EX1
Offline
I dont see the Node for SiteB.
Hi,
Have you tried to run Cluster Group "Cluster Group" /move
Martina Miskovic

Failed to resume automatic updates error 0x8024afff

I am running SCCM 2012 R2 with only one primary site. Windows updates seem to synchronize ok and i can manually push out updates and they install correctly. My issue happens when i try to deployed Automatic Updates for the first time. When i check the
ruleengine.log on the site server. i see that the rule doesn't find a single update to install even when i pick very simple parameters for the ADR to pick up. When i look at the updatehandler.log on the client side all i get is "Failed to resume automatic
updates error 0x8024afff" and it is unable to resume. our site only has 150 devices including servers. I'm only trying to configure an ADR for workstations. I have WSUS installed locally on the SCCM server and I am using a Remote Distribution point on
a Windows Server 2012 R2. I haven't been able to find much on this error code other than "0x8024AFFF WU_E_AU_UNEXPECTED An Automatic
Updates error not covered by another WU_E_AU * code." and no forums have been very helpful. Any help would be appreciated thanks!

Here's what i get in the ruleengine.log when i start an ADR. The parameters i have set have been simple. such as choosing "security" updates when there are a few security updates that are required. I have tried to choose almost every single category minus
products.
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:14 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4328 (0x10E8)
CRuleHandler: Need to Process 0 rules SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4324 (0x10E4)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:14 AM 4324 (0x10E4)
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
Constructing Rule 6 using Auto Deployment Rule Factory
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Populating Rule Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Populating Criterion Skeleton
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4328 (0x10E8)
Populating Action Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Populating Action Skeleton SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Need to Process 1 rules SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Processing Rule with ID:6, Name:Server Updates.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluating Update Criteria for AutoDeployment Rule 6
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluating Update Criteria... SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Rule Criteria is: <UpdateXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="SMS_SoftwareUpdate" LocaleId="1033"><UpdateXMLDescriptionItems><UpdateXMLDescriptionItem PropertyName="CustomSeverity"
UIPropertyName=""><MatchRules><string>'10'</string><string>'8'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="NumMissing" UIPropertyName=""><MatchRules><string>>=1</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem
PropertyName="Severity" UIPropertyName=""><MatchRules><string>'10'</string><string>'8'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="_UpdateClassification" UIPropertyName=""><MatchRules><string>'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4'</string><string>'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b'</string><string>'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f'</string><string>'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441'</string><string>'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828'</string><string>'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f'</string></MatchRules></UpdateXMLDescriptionItem></UpdateXMLDescriptionItems></UpdateXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:CustomSeverity, PropertyValue:'10'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:CustomSeverity, PropertyValue:'8'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:NumMissing, PropertyValue:>=1
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:Severity, PropertyValue:'10'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:Severity, PropertyValue:'8'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Inserting PropertyName:_UpdateClassification, PropertyValue:'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f'
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Query to run is: select CI_ID from dbo.fn_ListUpdateCIs(1033) ci~where IsExpired=0~ and (CustomSeverity in (N'10', N'8'))~ and (exists(select 1 from vSMS_UpdateComplianceSummary where CI_ID=ci.CI_ID and NumMissing>=1))~ and
(Severity in (N'10', N'8'))~ and (CI_ID in (select CI_ID from v_CICategories_All where CategoryInstance_UniqueID in (N'UpdateClassification:e6cf1350-c01b-414d-a61f-263d14d133b4', N'UpdateClassification:e0789628-ce08-4437-be74-2495b842f43b', N'UpdateClassification:b54e7d24-7add-428f-8b75-90a396fa584f',
N'UpdateClassification:0fa1201d-4330-4fa8-8ae9-b877473b6441', N'UpdateClassification:68c5b0a3-d1a6-4553-ae49-01d3a7827828', N'UpdateClassification:28bc880e-0592-4cbf-8f95-c79b17911d5f')))
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Rule resulted in a total of 0 updates
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Evaluation Resultant XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DefinitionUpdates/><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Enforcing Content Download Action SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Download Rule Action XML is: <ContentActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PackageID>CCC0001A</PackageID><ContentLocales><Locale>Locale:9</Locale><Locale>Locale:0</Locale></ContentLocales><ContentSources><Source
Name="Internet" Order="1"/><Source Name="WSUS" Order="2"/><Source Name="UNC" Order="3" Location=""/></ContentSources></ContentActionXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Criteria Filter Result XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DefinitionUpdates/><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
0 update(s) need to be downloaded in package "CCC0001A" (\\configserver\Source Files)
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
List of update(s) which match the content rule criteria = {}
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
No new update was added to the package. Package "CCC0001A" would not be updated.
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Download action completed for the AutoDeployment
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Enforcing Create Deployment Action SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>CCC00010</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>7</Duration><DurationUnits>Days</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>false</AllowRestart><DisableMomAlert>false</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>false</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>false</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>false</AllowInstallOutSW><EnableAlert>false</EnableAlert><AlertThresholdPercentage>0</AlertThresholdPercentage><AlertDuration>2</AlertDuration><AlertDurationUnits>Weeks</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>DisplayAll</UserNotificationOption><LimitStateMessageVerbosity>true</LimitStateMessageVerbosity><StateMessageVerbosity>1</StateMessageVerbosity><AllowWUMU>true</AllowWUMU><AllowUseMeteredNetwork>false</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Server Updates</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Server Updates</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
Parsing Rule XML... SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element DeploymentId SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element UpdateGroupId SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Could not find element UpdateGroupName SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 7/17/2014 8:37:29 AM
4324 (0x10E4)
CRuleHandler: Rule 6 Successfully Applied! SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Updated Success Information for Rule: 6 SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
CRuleHandler: Deleting Rule 6 SMS_RULE_ENGINE
7/17/2014 8:37:29 AM 4324 (0x10E4)
Found notification file D:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\6.RUL
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4324 (0x10E4)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
CRuleHandler: Need to Process 0 rules SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4324 (0x10E4)
Refreshed ScheduleList instance for Rule (6) from schedule string (01317B0000100038) with next occurence (7/17/2014 9:00:00 AM)
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4324 (0x10E4)
FindNextEventTime found next event for RuleID 6 as :7/17/2014 9:00:00 AM
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
RuleEngine: Got next rule execution time successfully. Next event is in 22 minutes
SMS_RULE_ENGINE 7/17/2014 8:37:39 AM
4328 (0x10E8)
Sleeping for 15 minutes SMS_RULE_ENGINE
7/17/2014 8:37:39 AM 4328 (0x10E8)

X301 - Fail to resume from hibernation

Hello,
this failure to resume from hibernation mode is actually the only problem I have encountered so far but it does actually annoy me. The BIOS-Update or this (http://www-307.ibm.com/pc/support/site.wss/MIGR-70477.html) update did not help either.
Do you need any more specifications?
Any suggestions? Thanks in advance for your effort!

I have the same problem too. Almost the system fails to resume from sleep mode everytime. I changed my power setting, when I close lid, it will go to hibenation mode, but the situation does not become much better. It is really annoying. I lost my current session, if I forget to shut down my system, before I close the lid.
This problem did not happen so frequently, until I updated the audio driver and turbo memory driver on aug. 30. The dear Thinkpad team, could you take a deeper investigation and make a solution for us?
In windows event logger, I find the following error message:
Description: The last sleep transition was unsuccessful. This error could be caused if the system stopped responding, failed, or lost power during the sleep transition.
Source: Kernel Power
Level: Critical
If you need further information, I will be cooperated.

Task sequence fails to resume after first reboot - Post Installation Task Sequence

Hi everyone,
I am unable to deploy a Post Installation Task Sequence whenever I add an application to the "custom tasks" folder in the task sequence. If I create a blank Post Installation Task Sequence w/o making any changes, it deploys fine and gives
me a summary page w/ no errors. Just to be clear, Litetouch runs fine when I kick off "cscript litetouch.vbs" from an elevated cmd prompt when logged in as administrator, but after reboot it boots to windows and does nothing.
I know it's not deploying because it's leaving around a mapped drive to the share, a SMSTaskSequence folder and MININT folder on the target machine. My understanding is that those are supposed to get cleaned up by LTIcleanup.wsf at the end of the
task sequence.
The BDD.log doesn't seem to be of much use. The last line of the log says "sms task sequencer already found on c:\minint\tools\x64" and then it does nothing.
FWIW, I'm able to deploy using the standard task sequence and also able to sysprep and capture. The application that I am trying to install is just a batch file that adds the reg key to hide the start menu, then reboot. I am not rebooting in the script,
I'm telling the application to do the reboot in MDT.
I know to a certainty that the target machine (a VM) has been sysprepped and am able to establish a connection to the deployment share so I'm kind of at a loss. Also looked over Keith's FAQ on the subject and couldn't find any similarities to my issue.
Any help is appreciated. I can provide logs if necessary. Thanks!

Well, I created a fresh deploymentshare on a fresh windows server 2012 VM and am still having the same problem. If I create a blank Post OS Installation Task and make no changes, it deploys fine to the target vm (win8.1). If I have an app (chrome)
that I have set to reboot after installation, it always (tested this 30+times) fails to resume the task sequence. I get no final confirmation page and a big mess that I clean up with LTIcleanup.wsf.
The deployment share has full (everyone) permissions to the share and I have full perms set to domain admin group for ntfs. It seems like something goes wrong with the reboot cycle, but autologin seems to work fine with the admin pw so I'm really confused.
Like I said, the bdd.log in c:\windows\temp\deploymentshare doesn't have any errors. I've tested this both on joined and unjoined (workgroup) machines and it makes no difference.
I should note that I can deploy Chrome and other apps sequentially as long as reboots are not involved. So far, I've only had this problem if the reboot occurs with the first application. Haven't yet tested on reboots w/ other apps in the sequence.
FWIW, this is starting to look like this:
https://social.technet.microsoft.com/Forums/en-US/2db5f184-8332-4f63-b1ad-385a6d893f8c/mdt-2013-windows-81-application-install-with-reboot-problem?forum=mdt
Can someone tell me why this might be happening? Is this a bug with this task sequence? Would someone mind testing this to see if there's just something wrong in my environment?
I'd appreciate it. Thanks.

KP "ATA Device recovery failed"

I am experiencing very disturbing behavior of my Mac since upgrading to Leopard: *clean new install* on a new SATA HD using *Sonnet Tempo SATA Adapter*. Repairing the permissions was not helpful.
Any help is more than welcome, I want my stable and solid Mac back!
*1) Sometimes my Mac freezes during the startup:*
a) grey screen with no spinning, I have to restart
b) a couple of times the Apple logo is not shown correctly (pixel soup) with sporadic freezing
*2) Sporadic KP during startup:*
Fri Nov 9 18:08:07 2007
panic(cpu 1 caller 0x3C0E56B4): "ATA Device recovery failed\n"@/SourceCache/IOATABlockStorage/IOATABlockStorage-200.1.8/IOATABlockSt orageDriverV2.cpp:2325
Latest stack backtrace for cpu 1:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x3C0E56B4 0x3C0E58D4 0x36D8B0E8 0x3BD59B5C 0x3BD5E1E4
0x3BD5C648 0x3BD62AB0 0x3BD62A14 0x003566B8 0x3BD629A0 0x3BD3AC64 0x3C0E5624 0x3C0E5748
0x3C0E58D4 0x36D8B0E8 0x3BD5DE8C 0x3BD5DAF8 0x36D960B0 0x0003F8D8 0x000AFE54
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.0)@0x3c0e2000->0x3c0f4fff
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x3c085000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.firmtek.driver.FTATASil3112(5.1.3)@0x3bd57000->0x3bd69fff
dependency: com.firmtek.driver.Sil3112DeviceNub(5.1.3)@0x3bd39000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x35614000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.firmtek.driver.Sil3112DeviceNub(5.1.3)@0x3bd39000->0x3bd3cfff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x35614000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000
com.apple.iokit.IOATAFamily(1.7.3f1)@0x36d88000->0x36d99fff
Proceeding back via exception chain:
Exception state (sv=0xc58000)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
Message was edited by: MacOne

I'm finding this error happening on my 12" PowerBook G4. It started happening just a day or so ago and the machine has been running Leopard since Sunday.
I've run the ADT program and that has found no issues with the machine (ran the long and short test) so far.
The machine was an Erase/Install and a Migration Assistant from a SuperDuper Image to restore apps and accounts. My other machine is the PMac G5 and it has had no issues like this so far (fingers crossed).
I'm taking the PB back to Tiger to see if the issue is OS related or not. If it's HW - I would expect it will show it's head again.
Apple is advertising a sale tomorrow for Black Friday - maybe it's time to upgrade to a MBPro...
My KP is pasted below in case the fact that my PB is suffering the same issue and my KP data helps.
Thu Nov 22 16:52:39 2007
panic(cpu 0 caller 0x010606B4): "ATA Device recovery failed\n"@/SourceCache/IOATABlockStorage/IOATABlockStorage-200.1.8/IOATABlockSt orageDriverV2.cpp:2325
Latest stack backtrace for cpu 0:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x010606B4 0x010608D4 0x0098F0E8 0x0098F81C 0x00992CF8
0x009A0170 0x009A10DC 0x00992AF0 0x00992774 0x00992704 0x003566C0 0x009926AC 0x009994C0
0x0098DBAC 0x01060624 0x01060748 0x010608D4 0x0098F0E8 0x0098F81C 0x00992CF8 0x009A0170
0x00992F20 0x009991D8 0x009A01A0 0x00992E24 0x0099A0B0 0x0003F8D8 0x000AFE54
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOATABlockStorage(2.0.0)@0x105d000->0x106ffff
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000
dependency: com.apple.iokit.IOStorageFamily(1.5.2)@0x832000
com.apple.driver.AppleKauaiATA(1.2.1f4)@0x99e000->0x9a2fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x7a5000
dependency: com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000
com.apple.iokit.IOATAFamily(1.7.3f1)@0x98c000->0x99dfff
Proceeding back via exception chain:
Exception state (sv=0x2a7efc80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9B18
Kernel version:
Darwin Kernel Version 9.1.0: Wed Oct 31 17:48:21 PDT 2007; root:xnu-1228.0.2~1/RELEASE_PPC

Fan Control fails after resume from pm-suspend

Hi,
i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
pm-suspend.log:
disabled, not active
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Don Feb 3 09:16:21 CET 2011: Finished.
Any ideas where to look for the problem?

I have the same problem with 2.6.37.1-1: suspend do not work.
The sceen goes blank then returns to X. The log shows the followings:
Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
Feb 21 15:50:33 localhost kernel: Device: misc
Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
Feb 21 15:50:33 localhost kernel: Call Trace:
Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
Revert or wait!
Or rmmod tpm_tis.
Last edited by daroczig (2011-02-21 21:55:10)

Adobe Media Encoder CC Fails To Dynamically Link Embedded AE Comps Within PR.

When launching a PR project in Media Encoder to kick off a render. The dynamic link engine loads the PR sequence just fine but during the render it fails to read any clips that were "relaced with AE comp", instead inserting an "offline media" plate. Launching the PR project and reviewing as well as rendering from within PR works fine. Please note that this worked fine in Adobe Media Encoder CS6.
*****Edit
In doing some tests to consistently replicate the problem, it turns out that AE CC has to be open WITH the replaced clip comps loaded at the time PR OR Media Encoder is running with projects that contain the "replaced with AE comps" footage. Repeating the test with AE CC closed at the time yields the "offline media" result. This is definitely a bug I'd say. AE should not have to be launched with the project files loaded up in order for any dynamically linked comps to work.
****Edit
Please note the entire product chain is CC. Thank you.

Update.....
Problem solved.
It turns out that any dynamically linked CC apps must be run by the same user on the same machine in order to work properly. In this case, PR and AME were being run as a standard user on the workstation while AE was being run as administrator via the shortcut launch properties. The latter being necessary to have certain plugins function properly in AE CC. Modifying the AE shortcut to not run as administrator resolves dynamic linking issues.
Although it can be argued that logically all Adobe apps should be run by the "same user" on the workstation, it would be nice for the dynamic link engine to be more "real world" about linking projects on the same workstation in the case where a particular resource needs to be launched as an administrator. Security considerations in towe, this ain't top secret government or banking data risk management folks. Lighten up. Maybe a little warning box that pops up and says "such and such needs to be run as administrator....do you allow?".....after all this is EXACTLY what the OS does anyway when you launch as anyone other than the administrator from a shortcut. Quite reasonable for you (Adobe) to simply cascade the behavior.

Failed to open links on the Intranet.

Hello!
In the technical support page for my company there are several links that allow access to files stored in folders on the server, however when the user gives a click on a link, the browser can not open the corresponding file.
Example:
Link: Technical Support.
Path: ... <a href="file://\\srvbvmg2\support"> ... </ a> ...
At first, I noticed that in the status bar is showing the following information: "http://intranet\\srvbvmg2\support". How do I make Firefox read the path of the shared network folder without displaying the words "http://intranet"?
NOTE: The procedure that was posted in the forum (Firefox fails to open Locan based intranet server files) did not solve my problem.

usbiksc,
Give the steps outlined in this article a shot and let us know if it helps. Best of Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728195&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=4083977
I work with HP my posts and opinions are my own.

Fails to resume after pm-suspend after changing graphics card.

Hello, i earlir had an ATI card, but it broke a few days ago. I got my hands on a very cheap second-hand nvidia card, and put it in my machine. After installing the correct driver, everything worked smooth until i tried to wake my computer from suspend. The screen is black and i can hear system beeps when pressing buttons causing system beeps, and can reboot with the help of my magical sysrq key.
The card is a Geforce FX 5950 and i fail to find a single complain about suspend not working with it.

This is my pm-suspend log after a failed awakening.
Initial commandline parameters:
Thu Aug 27 19:35:47 CEST 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux tukumon 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 18:04:53 CEST 2009 i686 Intel(R) Pentium(R) 4 CPU 2.66GHz GenuineIntel GNU/Linux
Module Size Used by
ipv6 277908 14
ext2 69036 2
jfs 180492 1
xfs 578752 1
exportfs 4260 1 xfs
snd_seq_dummy 2696 0
snd_seq_oss 31168 0
snd_seq_midi_event 7012 1 snd_seq_oss
snd_seq 53744 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 6768 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 40352 0
snd_mixer_oss 17540 1 snd_pcm_oss
snd_intel8x0 30592 1
snd_ac97_codec 106088 1 snd_intel8x0
usbhid 40608 0
fan 4392 0
ac97_bus 1540 1 snd_ac97_codec
hid 42496 1 usbhid
snd_pcm 73672 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 21100 2 snd_seq,snd_pcm
snd 58436 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
i2c_i801 9656 0
nvidia 7095560 24
ppdev 7656 0
battery 10984 0
uhci_hcd 23540 0
psmouse 59644 0
dcdbas 7876 0
e100 33420 0
mii 4804 1 e100
lp 9700 0
parport_pc 36964 1
parport 34380 3 ppdev,lp,parport_pc
iTCO_wdt 10952 0
iTCO_vendor_support 3080 1 iTCO_wdt
ac 4360 0
evdev 10176 10
sg 27928 0
soundcore 6848 1 snd
snd_page_alloc 8876 2 snd_intel8x0,snd_pcm
thermal 13888 0
processor 35800 0
button 5556 0
ehci_hcd 35664 0
i2c_core 22776 2 i2c_i801,nvidia
usbcore 150192 4 usbhid,uhci_hcd,ehci_hcd
serio_raw 5704 0
pcspkr 2372 0
intel_agp 27484 1
agpgart 32756 2 nvidia,intel_agp
shpchp 34328 0
pci_hotplug 28964 1 shpchp
rtc_cmos 11212 0
rtc_core 18048 1 rtc_cmos
rtc_lib 2500 1 rtc_core
ext4 237988 1
mbcache 7080 2 ext2,ext4
jbd2 57756 1 ext4
crc16 1636 1 ext4
dm_mod 60836 12
sd_mod 27328 4
ata_piix 23080 3
pata_acpi 4228 0
ata_generic 4680 0
libata 168012 3 ata_piix,pata_acpi,ata_generic
floppy 55780 0
scsi_mod 110708 3 sg,sd_mod,libata
total used free shared buffers cached
Mem: 3374324 236056 3138268 0 27856 116256
-/+ buffers/cache: 91944 3282380
Swap: 524280 0 524280
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Thu Aug 27 19:35:47 CEST 2009: performing suspend
Thu Aug 27 19:36:00 CEST 2009: Awake.
Thu Aug 27 19:36:00 CEST 2009: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Thu Aug 27 19:36:01 CEST 2009: Finished.

Backup failed: can't link file

Hi,
Somehow one hard disk went south, one that I luckily used to backup with Time Machine, so no harm done there, and now after bringing a drive up again, using the very same volume name, restoring with Time Machine was a piece a cake.
But, on the other hand, now whenever I try to have this new "old" volume being backed up with Time Machine, the latter reports a failure due to not being able to link files (something about UUIDs or similar).
How can I resolve this and get everything working as smoothly and neatly as before without loosing any of my backups or having to use another disk for the backup?
- MMHein

Hi,
Well my environment consists of:
*) Mac Mini (internal HD, 120GB, 42GB free, name "S" = System)
*) USB HD (external HD, Maxtor OneTouch 750GB, 408GB free, name "B" = Backup)
*) USB HD (external HD, Maxtor 250GB, 61GB free, name "D" = Data)
When volume/drive "D" got corrupted and couldn't be repaired or recovered, I had to sweep the partition, re-partition the drive and format it again, using the very same name for the volume as before ("D").
Next step was to perform a restore of the previously backed up contents of the former volume "D". As all my Time Machine backups are done exclusively to volume "B" it was rather a piece of cake, only a bit time-comsuming as I had something around 120GB to restore.
Having successfully accomplished this I now wanted to configure Time Machine to backup volume "D" again (which I have disabled for the duration of the restore). At first it seem to work just as intended (and it actually took quite a long time), but in the end Time Machine quit with an error message, saying it couldn't complete the backup ("...can't link files..."; so unfortunately an error message not found under the link you posted ).
In the system log the following entries can be found:
Jan 6 14:55:03 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Starting standard backup
Jan 6 14:55:03 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Backing up to: /Volumes/Backup/Backups.backupdb
Jan 6 14:55:06 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Event store UUIDs don't match for volume: MH Mac Mini
Jan 6 14:55:06 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Event store UUIDs don't match for volume: Data
Jan 6 14:55:06 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Jan 6 15:16:35 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Node requires deep traversal:/Volumes/Data reason:kFSEDBEventFlagMustScanSubDirs|
Jan 6 15:17:19 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: No pre-backup thinning needed: 192.30 GB requested (including padding), 248.81 GB available
Jan 6 15:20:13 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Copied 5361 files (61.3 MB) from volume MH Mac Mini.
Jan 6 21:38:10 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Copied 34905 files (158.7 GB) from volume Data.
Jan 6 21:38:10 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Error (12): Link of previous volume failed for Data.
Jan 6 21:38:16 MH-Mac-Mini /System/Library/CoreServices/backupd[4434]: Backup failed with error: 12
Jan 6 21:39:59 MH-Mac-Mini com.apple.launchd[134] (0x10e440.Locum[5039]): Exited: Terminated
Cheers,
MMHein

Ata 4.01 Failed to resume link (SControl 0)

Similar Messages

Maybe you are looking for