Atheros AR9382 cant find any network - its not support ?

hello
i think about new card for my laptop with 5GHz and 300MB/s , i buy new Atheros AR9382 witch is work perfect in windows 7 but i cant start up in my Arch 64Bit, its looks like detect by arch,
lspci -k
06:00.0 Ethernet controller: Qualcomm Atheros Device abcd (rev 01)
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
i can see new (wifi ?) interface - enp5s0
but i cant running any way, i check on http://wireless.kernel.org/en/users/Drivers/ath9k and that card sholud work i think but i no idea how start up... so please let me know is somebody know about this
thanks

sorry for my language, so i have now install in my computer Atheros AR9382, and now i need help how make that card working well , i heck ip link:
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp5s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:1b:38:dd:85:dd brd ff:ff:ff:ff:ff:ff
iw dev:
$ iw dev
$:
so iw dev show nothing,
so now i think i am clear ,
thanks

Similar Messages

  • I have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

    i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??

    Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
    Model Identifier Utility
    rachelfromnorthumberland wrote:
    what apps can i get??
    Finding iOS Apps Compatible with Older Devices

  • I'm having trouble with my  Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my  Ipad. It cant find any networks around it. What do i do?

    I'm having trouble with my  Ipad. It cant find any networks around it. What do i do?, I'm having trouble with my  Ipad. It cant find any networks around it. What do i do?

    Start here:  iPad: Troubleshooting Wi-Fi networks and connections.

  • Wifi cant find ANY network!!!!!!!!!

    My iphone 4s won't connect or cant find any WiFi network, and i know its not my WiFi because everything else in the house connects, I've tried everything, resetting my phone, network everything! still nothing and sometimes it'll even grey out when i reset and when i can finally get it to work, it works for a couple of minutes and lose connection again.

    Try searching this forum for the hundreds of other threads about this very issue.

  • Windows cannot find any networks

    hi all
    my dsl network connection is not being discovered by vista all of a sudden i tried all possible means but in vain any help would be greatly appreciated!
    the error message says "windows cannot find any networks" 
    its an adsl connection connected through a local area network
    Message Edited by samavedam_vijay on 11-23-2008 09:54 PM
    Cheers and regards,
    • » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
    ●๋•کáŕádhí'ک díáŕý ツ
    I am a volunteer here. I don't work for Lenovo
    Solved!
    Go to Solution.

    Hi,
    I think you already have done a Vista system restore?
    Which program do you use for connecting? AC or Vista.
    What have you done before and did this happen all of a sudden?
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Mbp 13", lion 10.7.4 wifi can't find any networks

    i've got macbookpro 13" core i7 for a year . about 2 days ago the wifi cant find any networks, i installed win7 on my mac already & wifi still working good but on mac os lion 10.7.0  can't find anything. when turn mac on , in the first time finds networks but can't join (a connection timeout occurred) after this message can't find anything . i tried to reset the SMC, PRAM,NVRAM & update my OSx to 10.7.4 & remove the contents of Library > Prefrences  but those aren't effective. im so disappointed ( && router works correctly) .... (((( Please Help....

    Hi Lesane,
    It sounds like you have been on the right track in troubleshooting this. If you are still having WiFi issues on your MacBook Pro, you may find the following article helpful, in particular the portion about Wireless Diagnostics:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    - Brenden

  • I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

    i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

    If Join was on then your home wi-fi must be set to Non-Broadcast.  If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used.  The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID .  Basically it is the name used to identify your router/network.  A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default.  Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in.  HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you.  You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files.  Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

  • I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    I backup to an external hdd with Time Machine, when it ran out of space it did not delete old backups, now my internal hdd says its full when before it had heaps of space. I have searched for extra files but cant find any. Can anyone help, please.

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
    You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Proceed further only if the problem hasn't been solved.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
    When you're done with ODS, quit it and also quit Terminal.

  • TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

    my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
    any thoughts anyone??

    Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
    I suggest that you begin by correctly identifying which iPod you have.
    http://support.apple.com/kb/HT1353

  • IPad2 wifi not finding ANY networks on iOS 7.0.4

    I am helping my friend with her ipad2.  I wish she had brought this problem to me before her warranty expired, but she did not.  This problem with the wifi has been going on since before the warranty expired. 
    It had wifi signal dropping and connection issues with iOS6 but they were sporadic or on and off.  So decided to upgrade the iOS to 7.  It was sporadic after updating the iOS to 7, but now it doesn't find ANY networks at all.  I've tried every fix I have found on the internet to no avail.  It is out of warranty.  Any ideas?
    Things I have tried:
    -turning Airplane Mode on and off
    -turning wifi on/off and and turning on Ask to Join Networks
    -turned Bluetooth off
    -reset Network Settings and every other reset setting listed on my ipad
    -restored ipad to factory settings after backing up
    -changed the name of ipad to remove apostrophe
    -turned brightness all the way up
    -tried it in different locations
    Most recently I tried to connect it to my wifi when I am about 8 feet from the router and MY 2 ipads (one of those is an ipad2) work no problem in my house (and don't have to be within 6 ft of the router). 
    I am not sure if there is another 'fix' I've tried that I forgot to list above-I've done so many.  But any ideas I found online I have tried.
    I am at the point thinking of calling in to Apple for support which will cost $35.  But if it's hardware related I am guessing my friend will be $35 poorer and no closer to a fix.  ANY HELP WOULD BE GREATLY APPRECIATED!!!  

    There is out-of-warranty repair which will replace an iPad at a reduced price.
    From here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Out-of-Warranty Service
    If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad, iPad 2,
    iPad mini Retina
    $249
    iPad 3rd, 4th generation,
    iPad Air
    $299
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service.Apple reserves the right to determine whether or not your iPad is eligible for Out-of-Warranty service. Replacement iPads have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare product coverage, whichever is longer. Please see theAppleCare+ for iPad and Apple Repair Terms And Conditions for further details.

  • Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

    hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
    i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
    diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
    when i click the apple in the top left corner the whole menu is greyed out... what to do ?  help me please
    Sincerly AppleNoob92
    p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

    Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

  • I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

    i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

    If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
    You MAY get help at Contact Customer Care
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • IPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

    iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

    iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

  • After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

    After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

    Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

  • TS1398 My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

    My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

    My Ipad 2 can not find ANY networks. All my other devices in my home are just fine. Any thoughts????

Maybe you are looking for

  • OVendor Payments using DTW

    Hello, Can anyone please help me with the templates for importing Outgoing Payments using the DTW. What are the mandatory fields and files? i keep getting an "I/O overlapping error" Confused. Thanks ! Greeshma

  • Can i install quick time 7 pro on a mac book air 10.8.2

    can i install quick time 7 pro on a mac book air 10.8.2

  • SAPGUI for Windows via Portal - problem with frame

    We are launching SAPGUI for Windows via Portal to drive single sign-on via AD.  Our problem is that when SAPGUI launches, it is contained within an IE browser frame that causes some of the SAPGUI screens to not fit on the screen well.  Those same scr

  • Rip of year from date field

    I have a question. I want to rip of the year from date field. For e.g if date is 01/02/2006 I want just the 01/02 which month and date. I tried to use substr function but it;s giving weird result. I used substr(date, 0,5) but not working. Please sugg

  • HTTP request error under HTTPS

    Under the HTTPS, we encountered an issue that the content responed by WebSpwhere would display a http request error in flash, but if the content was compressed the flash works fine, may i know if it is necessory to compress everthing response to flas