ATI Display settings not adjustable

Hello again,
I purchased a new Monitor and also purchase the DVI to VGA adapter from the apple store. Now i would like to use 1 monitor and have 2 machines hooked up on a KVM switch. My true issue is i cannot adjust the 19" Veiwsonic. Below are the settings and you will see that my old one is working just fine, but the new monitor won't adjust from the 640 x 480 and i think i need somewhere in the 1900x1400 range.
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 256 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A73503-202
Displays:
Display:
Resolution: 1280 x 1024
Depth: 32-Bit Color
Core Image: Software
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported
Display:
Resolution: 640 x 480
Depth: 32-Bit Color
Core Image: Software
Mirror: Off
Online: Yes
Quartz Extreme: Not Supported

I'm starting to think my the card is some how been damaged
I am inclined to agree.
You will need to look on eBay for a Mac compatible graphics card.
Retail sites that have Mac compatible cards are few, and they are scary expensive.
Besides, no one makes new cards any more. All OEM cards are used.
Here's how G5 options stack up:
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html
On eBay, the same Apple OEM 9600 runs about $150.
Mac compatible Radeon 9800 Pro cards run from $100.
An OEM Geforce 6800 GT or Ultra is over $200.

Similar Messages

Safe mode display settings not 'sticking' after restart?

Hi
I used a display setting not supported by my Mac mini and consequently had a 'out of signal' error on my monitor and restarted in safe mode, logged in and altered the settings.
When I restart the display settings do not 'stick' and I get the same error. How do I get the settings to stick? Have tried logging in as administrator and user with no joy!
Thanks Nigel

Hmm. Maybe that combination of changing resolution in Safe mode and resetting PRAM have a combined effect of some kind? Worth remembering for the future. Thanks for posting.

Folder Display Settings Not Saving

Searched forums with no luck, anyone run into this problem?
I have a user who likes to set up folders in his GroupWise 2012 client (on Windows XP) to show To and From columns as the first two columns in his folder view. When he changes a folder and saves the changes in the Properties/Display/Custom Settings, everything looks fine. The next day when he gets into his client and goes to the folder he changed, the changes (adding the To/From columns) are gone. The really strange thing is they are only gone "most of the time", at other times the changes stick and do not have to be redone. User has found nothing consistent about why changes are sometimes forgotten and other times remembered.
Thanks ahead for any ideas.

MarkMoorhead wrote:
> I have a user who likes to set up folders in his GroupWise 2012 client
> (on Windows XP) to show To and From columns as the first two columns
> in his folder view. When he changes a folder and saves the changes
> in the Properties/Display/Custom Settings, everything looks fine.
> The next day when he gets into his client and goes to the folder he
> changed, the changes (adding the To/From columns) are gone. The
> really strange thing is they are only gone "most of the time", at
> other times the changes stick and do not have to be redone. User has
> found nothing consistent about why changes are sometimes forgotten
> and other times remembered.
When saving the changes, instead of taking the default name of <Folder
Custom Settings> try changing the name to something like <Folder Custom
Settings2>. While I haven't seen this with the 2012 client, I have
seen it with GW8 and earlier and usually saving the display settings
with a different name would get the changes to "stick."
Also if this is just the 2012 client and not 2012 SP1, you could try
upgrading to the SP1 client.
We're your Novell--again. http://www.novell.com/promo/backtobasics.html
BrainShare 2013 is coming! http://www.brainshare.com

6303i - display settings not saved!

Hello - I have updated my 6303i to the latest firmware from the nokia site.
Everything works fine but now any chance I make to my display settings (e.g. wallpaper) are not saved, i.e. the change is being populated until the next reboot of the device. Once I rebooted the device, all my display settings changes are lost and e.g. I am back with a device with no wallpaper.
Any idea what is going on?
thanks

The problem came back a while after installing 10.10.2.
However, it does seem to have been fixed by 10.10.3. Hooray.

Hide Display Settings not applied in User GPO

Hello,
I am trying to hide the display settings via a GPO so folks can't change the resolution. I set the "Disable the Display Control Panel" setting to enable, but users can still go to the Control Panel and change the display settings. Other parts of
the GPO are applying, like the Ctrl+Alt+Del settings. The GPO has the loopback function set to replace. From my understanding, that should force all user settings in that GPO on everyone who logs into the computer, whether they are in that OU or not.
Some settings apply, just not the Display settings. Is there something else I have to enable to get that working?
Thanks
Jason Watkins MCSE, MCSA, MCDBA, CCNA

Hi Jason,
It's been a while. How is it going? If it still doesn't work out, we can run command
gpresult/h report.html to collect group policy result to check this. Note: to collect computer part group policy settings, we need to run the command with administrative privileges.
In addition, regarding troubleshooting group policy issues, the following thread can be referred to as reference.
[Forum FAQ] Common steps to start troubleshooting Group Policy application issues
https://social.technet.microsoft.com/Forums/windowsserver/en-US/382c97e8-93c8-4022-b8fe-22401037d14c/forum-faq-common-steps-to-start-troubleshooting-group-policy-application-issues?forum=winserverGP
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Display settings not saving

I have just bought a Touchsmart 14-n055sa and I'm having problems with linking my laptop to my tv using the HDMI lead. When I choose the "duplicate" option in display settings, I get a message saying that it is unable to save my settings. I have contacted Microsoft who have told me that I need to download some drivers, but I'm not sure which drivers to download. Anyone got any ideas??

Hi claudsmum,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Object-level display settings not working in CS5

I can't change display settings at an object level in an InDesign document, if I want to change display settings it will only work at the document level. If I try to change at object-level nothing happens. This is on a high-spec Windows 7 64bit with Nvidia GeForce 470, with up-to-date software & drivers, running InDesign 7.0.2.

Since I can't reproduce the problem here, at least so far in limited testing, I don't know where to point you or what might be affecting the frames in question. Can you copy a few of these frames onto a new page, verify that the problem still exists, then zip the page (you can delete the images, just leave the frames), and post it on a server someplace like YouSendIt.com, then post a link here?
It might not be something that you can fix except by replacing the frames. If that's the case, it might be possible to script the replacement.
Oh, I just thought of one other test. Have you tried cutting the image itself, using the direct select tool, and pasting into a new frame? that also will help isolate the problem as the frame.

Os x 10.10 display settings not remembered

New Mac Pro 12-core running 10.10.2, main monitor is LG UM95 connected via thunderbolt, also a Panasonic TV connected via HDMI to the HDMI port. At every restart, the display settings revert to "mirrored" mode. How do I fix this?

Try resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Display settings not reatained

I'm runing my thinkpad with dual monitors when docked, and it doesn't retain the resolution I set for either monitor when the system is restarted. Is there a way I can set a mandatory display resolution for both monitors?

Hi claudsmum,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I will be happy to help you with the “unable to save display settings” error message. To find the correct graphics driver for you to install I will need to know your operating system.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Nvdia geforce display settings not avilabe in screen resolution

I bought a NEW HP 15 r0022tx note book i am having windows 8.1 64 bit operating system
i just installed a nvdia driver. when i open the screen resolution it showed that display is using intel hd integrated graphics.
and i uninstalled the intel hd graphics driver and restarted my pc. but I am not able to see nvdia display graphics option neither in screen resolution settings nor in nvdia control panel.
Please help me(reply me) fast....

Hi @v95 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with your HP 15-r022tx Notebook and issues with the graphics card. I would do a system restore.
Once that has completed I would just go to the Device manager right click on the drivers for the graphics card and update the driver.
If this does not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Snow Leopard: Display settings not working anymore. DO NOT LOCALIZE

Hello,
the following message was posted in the MacBook Pro Display forums and i was suggested to write it here:
I purchased a MacBox Set and upgraded from Tiger on a MacBook Pro 15" (2007). I did a clean install. That was two weeks ago.
Today i went into System Preferences>Displays (not my first time there) and a window oppened by itself saying that the display setting was about to be changed and maybe certain software would not be showed properly in a resolution below 800X600 (sorry, that's my translation. I use a Spanish SO).
After that, the resolution changed to 640X480 and the Display panel became useless. It's impossible to set any other resolution and on the refresh settins apears that message: <<do not localize>>. Under the Resolutions Field appears <<<DO NOT LOCALIZE>>> as well.
I tryed:
* Repair disk Permissions
* Reset PRAM
* Reset PMU
* I did a hardware test (the long one). No problems found.
I was not able to use the system disks (the ones that came with my computer) because the image on the screen appears completly distorted and i am not able to navigate through the menus. I was able to use Hardware Test because the buttons where showed in the middle of the screen.
I tryed to use the Snow Leopard DVD, but the part of the welcome window in wich the buttons are was out of the screen and i had no chance to click on them.
I have temporarily fixed that using a ten days trial version of SwitchRes X. Everything works fine now, but the Display preferences panel from MacOs stays "in coma". So i guess it's not a hardware problem, but a Snow Leopard Problem. If in ten days i don't find a fix for that, i'm gonna be forced to buy the program, a really good software, i have to say, but a software i shoulnd't need.
After been able to recover my original resolution via SwitchRes X, I checked the disk and it was ok. I repaired it anyway. Back to my desktop, i checked the permisions and everything was fine except for this message:
"Advertencia: el archivo SUID “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgen t” se ha modificado y no se reparará."
I got this message since the first time i checked permissions and its well know by other users. It is supposed to be normal.
Anyway, it didn't worked.
I'll appreciate any help. Thanks!
Message was edited by: ignatius j.Reilly

"I was not able to use the system disks 'cos the image on the screen appears completly distorted and i am not able to navigate the menus."
Never ran across that type of problem on Apple's message boards.
"I have temporarily fixed that using a ten days trial version of SwitchRes X. Everything works fine now but the Display preferences panel from MacOs, wich stays "in coma"."
In that case, are you now able to boot off your install DVD? If so, run the +"repair disk"+ option, when done boot back to desktop & run repair permissions.
"So i guess it's not a hardware problem, but a Snow Leopard Problem."
Post in the Mac OS X v10.6 Snow Leopard Forums where the SL users hang out at.
!http://i50.tinypic.com/izvwo1.gif!

B540P Display brightness not adjustable

Hello,
i have just bought the Lenovo B540P VDZ9EGE (i5, GT650M, Windows 8 64bit)) and i have a problem. I can not change the screen brightness, neither with touch on the button of the screen, nor in Windows 8. In Windows 8 it says: not available and I can not click on it. The screen brightness is always on the highest setting I think. It would be nice, if you could help me. Thank you very much. I apologize for my english.

hi BK86,
If you have the IdeaCentre™ B540p (3363) with the NVIDIA® GeForce® GT650M, can you try to :
1. Update the display driver to GeForce 314.07 DriverVersion 314.07 - WHQL from the nvidia website.
2. Run Windows Update to get the latest patch and bug fixes.
After doing the steps above, try to press the brightness Up or Down button on the LCD panel
Spoiler (Highlight to read)
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

1080p 50 Hz display settings not appearing

I have 1080i and 720p 50 Hz but not 1080p why???

I'm able to confirm that the only option at 1080p is "1080p HD" on all my tv's, although the tv doesn't actually say what frequency it is using, the tv's themselves denote 60 Hz.
I don't really know why this is, but have always assumed the tv manufacturers have catered for mainstream devices only such as blu-ray players etc which I'm not aware are available with 50 Hz output.
It's more than likely that you aren't actually missing all that much and it isn't something that has concerned me all that much.

My iPhone display will not adjust to landscape

Can't get my phone to adjust to landscape

Is it possible you've locked it into portrait mode? If so, icon in topbar, instructions here:
http://www.tech-recipes.com/rx/6125/iphone-ios4-lock-orientation-but-where-is-th e-horizontal-lock/

2 year old 30" Cinama HD Apple display, brightness not adjusting properly..

My monitor has been off for about a week and a half and now this morning it is dark and the brightness control won't stay up where it should be, it keeps sliding back down. Anyone experience this before? What should I do? The screen is so dark...

Working now, guess it just needed to warm up after the long holiday break.

ATI Display settings not adjustable

Similar Messages

Maybe you are looking for