Ati mobility radeon hd 5650

my pavillion dv7-4080us popped an error message, " your ati mobility radeon hd 5650 is not enabled or is not running properly" I checked the support assistant, It said - aero status - disabled. How do i enable it, is that my graphics card? or is my "ati" error message something else?

Hi,
It may be a good idea to reinstall the drivers for your graphics card. The latest drivers for your model can be found on the link below. Just select your OS.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=-1&lc=en&cc=us&dlc=en&sw_lang=&product=423058...
Hope this helps,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

[Solved] ATI Mobility Radeon HD 2300 Problem - fglrx not loading

I changed the currently unreliable GS 8600 nvidia card in my laptop to a compatible old ATI HD 2300 card from a similar model laptop but I can't get the Catalyst drivers to work with it. The open source driver xf86-video-ati works well with it for basic use, but is not so good for 3D. This card should work with an Amilo xi-2428 & has done for other people who have developed faulty nvidia cards.
I have the legacy driver installed from AUR (Catalyst-total-hd234k) and have enabled Vi0L0's [xorg112] server properly in pacman.conf & downgraded to Xorg-server 1.12. I also tried downgrading to Xorg-server 1.11 & reinstalling the drivers from AUR. Plus I have enabled and tried Vi0L0's [catalyst-hd234k] repo in place of the AUR package each time too. Made no difference. I've blacklisted radeon too.
When the laptop boots systemd-modules-load.service shows as failed.
$ sudo systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[fyn@Finnix ~]$ systemctl status systemd-modules-load
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Wed, 2012-12-19 15:29:57 GMT; 7min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 121 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
It is only the fglrx module which fails to load:-
$ sudo journalctl -b _PID=121
-- Logs begin at Fri, 2012-10-26 09:21:22 GMT, end at Wed, 2012-12-19 15:38:07 G
Dec 19 15:29:56 Finnix systemd-modules-load[121]: Failed to insert 'fglrx': No such device
Dec 19 15:29:56 Finnix systemd-modules-load[121]: Inserted module 'nfs'
Dec 19 15:29:57 Finnix systemd-modules-load[121]: Inserted module 'vboxnetflt'
I have no idea how to get fglrx to load & since it fails to load so early during boot I doubt the problem lies with my Xorg.conf. Likewise neither aticonfig or the ATI control center work.
aticonfig: No supported adapters detected
amdcccle just give this message
"There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
No AMD graphics driver is installed, or the AMD driver is not functioning properly.
Please install the AMD driver appropriate for you AMD hardware, or configure using aticonfig."
Graphic card info
$ hwinfo --gfxcard
27: PCI 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: VCu0.SZRyUClQNUF
Parent ID: vSkL.rRA4AOLb3d5
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ATI M71 [Mobility Radeon X2100]"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x7210 "M71 [Mobility Radeon X2100]"
SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
SubDevice: pci 0x1107
Revision: 0xce
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
I/O Ports: 0x2000-0x2fff (rw)
Memory Range: 0xcfef0000-0xcfefffff (rw,non-prefetchable)
Memory Range: 0xcfe00000-0xcfe1ffff (ro,non-prefetchable,disabled)
IRQ: 5 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00007210sv00001734sd00001107bc03sc00i00"
Driver Info #0:
Driver Status: radeon is not active
Driver Activation Cmd: "modprobe radeon"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #8 (PCI bridge)
Primary display adapter: #27
my Xorg.conf derived mainly from a newly generated config using Xorg :0 -configure
Section "ServerLayout"
Identifier "Arch"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "ColorTiling" # [<bool>]
#Option "ColorTiling2D" # [<bool>]
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "TVStandard" # <str>
#Option "EXAVSync" # [<bool>]
#Option "EXAPixmaps" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "EnablePageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
Identifier "Card0"
Driver "fglrx" # Essential.
# Driver "vesa"
BusID "PCI:1:0:0" # Recommended if autodetect fails.
Option "OpenGLOverlay" "0" ##
Option "XAANoOffscreenPixmaps" "false" ##
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card1"
Driver "fglrx"
# Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24 # Should not change from '24'
Modes "1280x800" "1280x800" ## 1st value=default resolution, 2nd=maximum.
Virtual 1664 1200 ## (x+64, y) to workaround potential OGL rect. artifacts/
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666 # May help enable direct rendering.
EndSection
Xorg log
[ 22.305]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 22.306] X Protocol Version 11, Revision 0
[ 22.306] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 22.307] Current Operating System: Linux Finnix 3.6.10-1-ARCH #1 SMP PREEMPT Tue Dec 11 09:40:17 CET 2012 x86_64
[ 22.307] Kernel command line: root=/dev/sda3 ro video=vesa:off vga=0x360 init=/usr/lib/systemd/systemd nomodeset
[ 22.308] Build Date: 27 August 2012 08:04:39AM
[ 22.308]
[ 22.309] Current version of pixman: 0.28.2
[ 22.309] Before reporting problems, check
to make sure that you have the latest version.
[ 22.310] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.312] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 19 13:14:33 2012
[ 22.312] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.313] (==) ServerLayout "Arch"
[ 22.313] (**) |-->Screen "Screen0" (0)
[ 22.313] (**) | |-->Monitor "Monitor0"
[ 22.313] (**) | |-->Device "Card0"
[ 22.313] (**) |-->Screen "Screen1" (1)
[ 22.313] (**) | |-->Monitor "Monitor1"
[ 22.313] (**) | |-->Device "Card1"
[ 22.313] (**) |-->Input Device "Mouse0"
[ 22.313] (**) |-->Input Device "Keyboard0"
[ 22.313] (==) Automatically adding devices
[ 22.313] (==) Automatically enabling devices
[ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.313] Entry deleted from font path.
[ 22.313] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.313] Entry deleted from font path.
[ 22.313] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 22.313] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 22.313] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 22.313] (WW) Disabling Mouse0
[ 22.314] (WW) Disabling Keyboard0
[ 22.314] (II) Loader magic: 0x7c8b00
[ 22.314] (II) Module ABI versions:
[ 22.314] X.Org ANSI C Emulation: 0.4
[ 22.314] X.Org Video Driver: 12.1
[ 22.314] X.Org XInput driver : 16.0
[ 22.314] X.Org Server Extension : 6.0
[ 22.315] (--) PCI:*(0:1:0:0) 1002:7210:1734:1107 rev 206, Mem @ 0xd0000000/268435456, 0xcfef0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 22.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.315] (II) "extmod" will be loaded by default.
[ 22.315] (II) "dbe" will be loaded by default.
[ 22.315] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 22.315] (II) "record" will be loaded by default.
[ 22.315] (II) "dri" will be loaded by default.
[ 22.315] (II) "dri2" will be loaded by default.
[ 22.315] (II) LoadModule: "glx"
[ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.315] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 22.315] compiled for 6.9.0, module version = 1.0.0
[ 22.315] (II) Loading extension GLX
[ 22.315] (II) LoadModule: "extmod"
[ 22.315] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.315] (II) Module extmod: vendor="X.Org Foundation"
[ 22.315] compiled for 1.12.4, module version = 1.0.0
[ 22.315] Module class: X.Org Server Extension
[ 22.315] ABI class: X.Org Server Extension, version 6.0
[ 22.315] (II) Loading extension MIT-SCREEN-SAVER
[ 22.316] (II) Loading extension XFree86-VidModeExtension
[ 22.316] (II) Loading extension XFree86-DGA
[ 22.316] (II) Loading extension DPMS
[ 22.316] (II) Loading extension XVideo
[ 22.316] (II) Loading extension XVideo-MotionCompensation
[ 22.316] (II) Loading extension X-Resource
[ 22.316] (II) LoadModule: "dbe"
[ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.316] (II) Module dbe: vendor="X.Org Foundation"
[ 22.316] compiled for 1.12.4, module version = 1.0.0
[ 22.316] Module class: X.Org Server Extension
[ 22.316] ABI class: X.Org Server Extension, version 6.0
[ 22.316] (II) Loading extension DOUBLE-BUFFER
[ 22.316] (II) LoadModule: "record"
[ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.316] (II) Module record: vendor="X.Org Foundation"
[ 22.316] compiled for 1.12.4, module version = 1.13.0
[ 22.316] Module class: X.Org Server Extension
[ 22.316] ABI class: X.Org Server Extension, version 6.0
[ 22.316] (II) Loading extension RECORD
[ 22.316] (II) LoadModule: "dri"
[ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.316] (II) Module dri: vendor="X.Org Foundation"
[ 22.316] compiled for 1.12.4, module version = 1.0.0
[ 22.316] ABI class: X.Org Server Extension, version 6.0
[ 22.316] (II) Loading extension XFree86-DRI
[ 22.316] (II) LoadModule: "dri2"
[ 22.316] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.317] (II) Module dri2: vendor="X.Org Foundation"
[ 22.317] compiled for 1.12.4, module version = 1.2.0
[ 22.317] ABI class: X.Org Server Extension, version 6.0
[ 22.317] (II) Loading extension DRI2
[ 22.317] (II) LoadModule: "fglrx"
[ 22.317] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.333] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.333] compiled for 1.4.99.906, module version = 8.97.2
[ 22.333] Module class: X.Org Video Driver
[ 22.333] (II) Loading sub module "fglrxdrm"
[ 22.333] (II) LoadModule: "fglrxdrm"
[ 22.333] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.333] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.333] compiled for 1.4.99.906, module version = 8.97.2
[ 22.333] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.333] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.333] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.333] (++) using VT number 1
[ 22.334] (WW) Falling back to old probe method for fglrx
[ 22.337] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 22.337] (EE) No supported AMD display adapters were found
[ 22.337] (EE) No devices detected.
[ 22.337]
Fatal server error:
[ 22.337] no screens found
[ 22.337]
Please consult the The X.Org Foundation support
at
for help.
[ 22.337] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 22.337]
Solved. The ATI Mobility Radeon HD 2300 was based on an earlier design & was not really one of the HD 2*** cards, even tho it was released as one (HD 2*** cards are R600 series while the HD 2300 is based on the R500 generation). So the offical drivers for it were relegated to legacy in 2009 with AMD's Catalyst 9.3 release & are no longer supported. Pretty crappy considering the HD 2300 was only on the market from 2007.
To use the official catalyst drivers would require xorg 1.5.3 and kernel 2.6.29..... with no support for newer distros.
Using open source drivers, cannot remember all the packages but have listed some below in case it helps anyone:-
xf86-video-ati
ati-dri
lib32-ati-dri
libtxc_dxtn
lib32-libtxc_dxtn
mesa
lib32-mesa
No xorg.conf needed for it using kms, but can make a config file to tweak if you like in the xorg.conf.d directory called 20-radeon.conf
Last edited by Nixie (2012-12-24 17:21:29)

Thanks for the response. It is not an obvious hardware issue. I would contact HP phone support to get the hardware addressed. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
Please let me know if you have any other questions or concerns. Thanks!
Mario
I worked on behalf of HP.

Flash Player Crashes completely on ATI Mobility Radeon

hello,
I am the administrator of a couple of websites, that share the same AJAX/Flash AS3 basic structures. Normally, everything works fine, but on a few notebooks, every browser crashes at that moment, the flash components start to work.
the notebook:
DELL studio XPS 16
ATI Mobility Radeon HD 3670
Windows Vista
http://www.dell.com/us/en/home/notebooks/laptop-studio-xps-16/pd.aspx?refid=laptop-studio- xps-16&cs=19&s=dhs
an example page:
http://www.thadasuanduanchai.com
i have no idea, why that happens, but i suggest, that a problem with flash-graphics card or flash-built-in camera may be responsable for the problem.
Has anybody an idea?
thank you very much,
C.Brosdau
Germany

If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

Gx623 ati mobility radeon 4670

I have problem with ati mobility radeon 4670, as i can understand full core speed is reached just in 3d mode (675MHz), normal mode 300 MHz.
I made a test with game "Blur" and it seems like something wrong with 3d control, because i got lag. maybe drivers ? or smth ?
Driver version: 8.741.0.0
i guess in 3d mode it should stay stable at 675MHz

The temperatures are a bit high if it is a new laptop. If it's not, there may be some dust inside building the heat up. You should try installing system control manager and using the turbo mode. It improves the performance quite a lot. Also, i would suggest to update the game to the latest version, it may improve the performance too. This issue was really significant with GTA4. With the original version, it lagged with low settings, and with the latest patch i can play on medium settings with no lag at all.

Need driver for display (ATI Mobility Radeon 7000 IGP)

Necessary driver for display ATI MOBILITY RADEON 7000 IGP under operating system Win 98, ME

Hi
Like Joao said try to find necessary drivers on Toshiba download site. All drivers are designed for each notebook model and if you use a driver downloaded from graphic card producer site there is no guarantee that it will work properly.
Good luck!

T42p ATI Mobility Radeon Fire GL T2

When I try to install the ATI Mobility Radeon Fire GL T2 driver from ATI's website, why does it not work? It claims the hardware is not present.
Message Edited by rwing14 on 07-31-2008 12:30 PM

Have you unpacked the driver from the correct directory after downloading it, it should be something like C>Drivers>Win>Video (or Monitor)?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Where do I get ATI mobility Radeon 9600/9700 Driver for Satellite M30?

Hey ho, had to reinstall winxp now i cant get any drievrs for the graphic card, I tried ATI they got the ones i need, but say they dont support toshiba notebooks and i cant install or even download the driver i need.i looked everywhere . on this site in the drivers section i cant find any ati drivers or any graphic drivers at all...Anyone got a Link for me plz?
Ati mobility Radeon 9600/9700 Driver for Satellite M30
Hope this works somehow been looking all day long now :(

Hi,
its your lucky day my friend.
Check this sites and download the drivers you need:
http://www.laptopvideo2go.com/
http://www.omegadrivers.net/
The drivers are native Nvidia/ATI drivers but the *.inf files (the files where the hardware information and the settings for the cards are listed) were fitted for mobile systems. That means you can install them on your machine and by the way you will get the most actual drivers.
Greets

Can not install latest ATI mobility Radeon x1600 display driver for my Satellite A100

Hello,
my Satellite A100-704 PSAA9E is equipped with the ATI Mobility Radeon X1600 display graphic card, for which ATI provides a new driver, named Catalyst 8.3. My issue is that when I run the verification software I get a message telling me that driver is not suitable to be installed on my system.
Is that any information available about it? Can I still install the new Catalyst driver or it's better if I don't? Oh, the current driver I have running on my notebook is the one downloaded from the Toshiba site, 8.292 I believe.
Any information is appreciated. Thank you very much.

> Can I still install the new Catalyst driver or it's better if I don't?
I dont recommend the installation of any 3rd party graphic drivers. The fact is that such drivers are not tested and not certified and nobody knows how such driver would affect the notebooks hardware in worst case it could lead to the GPU overheating and damage
best regards

HP G-72 Video driver UPDATE (ATI Mobility Radeon HD 5470)

Hi...
Pleas I need latest video driver for my GPU Ati Mobility Radeon 5470...win7 64bit
I found only driver of 2010 (sp 50231) and I need the newer...
When I download for example Catalyst 13.9...with graphics driver and install, switchable graphics stop working...
Pleas can you help me? Witch product I can download?
Thx so much
This question was solved.
View Solution.

Hi Sirec,
Please let me know what is your model number and current operating system?
Here is a link that will help you find that out.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en
Please let me know.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Support Windows 10 for ATI Mobility Radeon X2300

Hi Will be any driver how to install ATI Mobility Radeon X2300 for Windows 10 or not? Thank you

look here! http://answers.microsoft.com/es-es/windows/forum/windows_10-win_upgrade/pantalla-ati-mobility-radeon-x2300-no-compatible/83e306a6-979c-4c79-b064-468a8f840fdb Some people said that the driver works!

ATI Mobility Radeon Premium Graphics DirectX 11

Please give a link for DirectX 11 download.

Dear sir,
        Below mention system I Purchased from Doha -QATAR
I Need
ATI Mobility Radeon Premium Graphics DirectX11
                                           For
                  Model No      :- HP Pavilion dv3 4303se
                  Serial No.     :- [edited by Moderator]
                  Product No. :- LE428EA#ABV
   Reply as soon as possible
Thank you

Drivers needed for AMD ATI Mobility Radeon Series

1//
this card is AMD ATI Mobility Radeon™ HD3650/HD3450/HD 3670/HD4570/HD565v/HD4670/HD4330/HD5450/HD5650/HD5470/HD4200/HD5730/HD550v/HD540v/HD545v
Graphics Driver , WINDOWN 10 don't support it ,
pls write to code for it , i'm very like this kernel (win 8.1 ) and want to use it . Thanks
MS .
2//
and :Raster images like JPEG in my computer
http://www.mediafire.com/download/2syw01l9d9i8e6y/Untitled.png

1//
this card is AMD ATI Mobility Radeon™ HD3650/HD3450/HD 3670/HD4570/HD565v/HD4670/HD4330/HD5450/HD5650/HD5470/HD4200/HD5730/HD550v/HD540v/HD545v
Graphics Driver , WINDOWN 10 don't support it ,
pls write to code for it , i'm very like this kernel (win 8.1 ) and want to use it . Thanks
MS .
2//
and :Raster images like JPEG in my computer
http://www.mediafire.com/download/2syw01l9d9i8e6y/Untitled.png
You need to contact AMD directly to advise them of the problem. AMD has sole responsibility for the publication of the hardware drivers for their products. Microsoft does not write hardware drivers for any third party hardware. Drivers
supplied by Windows update are supplied by the original publisher to Microsoft who in turn distributes the drivers via Windows Update.
So, it is your responsibility to report the problem directly to AMD for the ultimate resolution.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

ATI Mobility Radeon X1600 graphics card Windows 8 driver missing

I just installed Windows 8 Enterprise Trial version on HP nx9420 laptop (2GHz dual core prosessor, 4gb memory, ATI Motility Radeon X1600 graphics card with 256mb own memory, 1680x1050 native display resolution) on second partition, side by side with existing
Windows 7.
Installation succeeded perfect, except Windows 8 couldn't install, nor did find from Windows Update display driver for ATI Mobility Radeon X1600 graphics card. Only Microsoft generic display driver was installed and it offered maximum 1450x800 resolution,
so not laptops native 1680x1050 screen resolution.
Windows 7 can install working ATI driver right from Windows Update for that graphics card (version 8.561.0.0 dated 1.12.2008).
Laptop manufacturer HP has latest, old driver for Vista (version 8.453.0.0 dated 22.1.2008), so I installed that, selecting compatibility mode Vista with setup-program in Windows 8. That installed, but seems to have some problems, telling of missing library,
maybe with some ATI extra diplay manager software and C++ 2005 library, that it installed.
MY QUESTION: Is there some problems with Windows 8 and that ATI Mobility Radeon X1600 graphics card? Why isn't the Windows 7 -version of ATI mobility radeon X1600 display driver available in Windows Update for Windows 8 too?

Thank you all of your thanks.
I can confirm that this solution works with Windows 10 Technology/Insider preview too. And surely works with forthcoming Windows RTM too.
Windows 8.1 and Windows 10 TP work both like a charm with nearly 10 years old HP Compaq nx9420 laptop, with Intel Core 2 Duo and ATI Mobility Radeon X1600 display adapter. Nice co-operation of "old" hardware and very Modern Windows OS.
So in brief:
If you have laptop with ATI Mobility Radeon X1600 or other X1000-series display adapter and
you want to install Windows 8, 8.1 or 10, do this:
0) First just install Windows 8.x/10. It will install Microsoft Generic display driver, but that doesn't support full resolution of ATI Mobility Radeon X1000 -series - for example it may show maximum 1400x1050 -resolution, thus your laptop display and Radeon
X1000 may support native 1650x1050, but you can't obtain that resolution with that Microsoft generic driver. So you need ATI-driver and you can get it this way:
1) With Internet Explorer (this doesn't work with other browsers) go to
Microsoft Update -catalog: http://catalog.update.microsoft.com/
2) Search "ATI Mobility Radeon X1600"
(or X1300, X1800 etc)
3) Sort search results by date (last update -column), latest on top. You will see drivers for Windows 7
- they will work with Windows 8.x and 10 too. There is certainly two of them; other is 32 bit only and other is 64 bit dirver.
4) Select proper driver version of them, according your Windows 32 or 64 bit, so click Add
5) At top-right click Show basket and then download those driver packages to your computer. They are cab-file
-packages.
6) Obtain 7-zip -utility, install it and with it unpack that cab-driver package on folder with its package-name.
7) On start of taskbar, right mouse button click Windows-Start and then select Hardware management. On
Hardware management -window open Display adapter -section, then mouse right click Microsoft adapter and select Update driver. Then on next window, select search driver from computer.
8) Browse on folder, where you unpacked ATI driver (on stage 6 earlier) and select Next ... that updates
driver, on the go and you don't need even to reboot Windows.
9) Now you have proper ATI Mobility Radeon -driver in use. It surely sets automatically resolution
according your laptop screen (so recommended native resolution of screen panel) or you can select that on diplay settings.
Extra: For that Windows 8.x/10 boot works fine too, do this too:
Seems that Windows 8.x (and Windows 10 too), with their hybrid-shutdown -functionality, require some support of the display adapter, that ATI Radeon Mobility x1000 -series don't have.
So the solution is to disable that Windows 8.x (or Windows 10) hybrid boot -functionality (that is quicker boot) and to use "normal boot".
You can fix that this way:
- at end of Taskbar click battery/power icon and select Power settings
- navigate to power and sleep settings
- either at bottom of those settings, or in Win10 more power settings, select power buttons functionality/settings (so what power button, sleep button or closing laptop screen does)
- at bottom of those settings is shutdown options (or with similar name). uncheck "use quick boot" -settings (for to uncheck that you may need to click first upper "changing disabled settings" (or similar name) at top or windows)
(I recommend to check Hibernate at the same time too, because that is usefull)
- then Save settings and reboot Windows and you have got rid of that problem that Windows 8.x/10 don't show Lock screen, now it does.
Boot takes just a little longer, so practically no problem. And if you need quicker boot with laptop, use Hibernate-state, so don't shut down your laptop, but instead put it into Hibernate-state (that is better than Sleep mode, because Hibernate-mode doesn't
consume battery-power, like Sleep-mode does)

No hardware video decoding on ATI Mobility Radeon HD 3470

Hi all,
does anybody know why accelerated video decoding isn't avaiable on ATI Mobility Radeon HD 3xxx Series? From what I read in the corresponding KB article it works on the desktop counterparts that are based on the same hardware.
In my case I'm using an ATI Mobility Radeon HD 3470 on a T400 with switchable graphics (same as reported in this thread). When watching a video on Youtube (e.g. http://www.youtube.com/watch?v=eI3f4b-b8ig) and displaying video information it says "accelerated video rendering, software video decoding". So hardware video rendering works, but hardware video decoding doesn't! It's acceptable on my machine since it's equipped with a decent fast Intel P8400 CPU, but since my graphics card supports hardware decoding for h264 video it's just a waste of ressources.
Does anybody know if Adobe plans support forhardware decoding with these graphics cards? Or is there even a way to use hardware decoding although not fully supported?
Thanks
Eduard
System Information:
Windows 7 Prof. x86
Firefox 10.0.2
Flash Player 11.1.102.63
DxDiag report: http://pastebin.com/FKxtBA2i

If you read in graphics hardware support in some previous releases of Flash Player, flash video decoding support a.k.a. h.264 hardware video decoding is supported fully by ATi(or AMD) Radeon HD 4xxx and higher. The Radeon HD 3xxx and lower can't support h.264 video decoding for flash video decoding fully enough.

Will the ATI Mobility Radeon HD 3400 Series Graphics card be capable of outputting at 2560x1440?

I currently have a dell studio 15 laptop with an ATI Mobility Radeon HD 3400 graphics card, i'm planning to upgrade to an iMac with the same 27 inch display as the one in this forum but i was hoping to continue to use this computer and use the iMacs great display as an external monitor whenever i want to use windows, i was wondering if my graphics card supports such a high resolution or not?
Thanks

Since I'm running Windows 7 Enterprise, I cannot use Windows Update as it is controlled by WSUS. Anyway, after hours of discussing with the IT experts at my workplace, none of them could solve the problem. They even said I can never run my video card again as it is not compatible with Windows 7.
But I didn't give up.
After hours of figuring out a solution, I decided to download and try out the "ThinkPad Switchable Graphics Driver for Windows 7 - ThinkPad R400, T400, T500, W500" and guessed what? It worked! The Catalyst center was also installed. Who knew it was the Switchable Graphics Driver when the ATI card was the only one shown in Device Manager to be not working.
Here's the link:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73641
I hope this works for all of you who had the same problems as me. Cheers!

Ati mobility radeon hd 5650

Similar Messages

Maybe you are looking for