Attach new monitor

I have a white MacBook (small) and want to purchase a new, large monitor. Will I be able to connect the new monitor to the MacBook? Do I just have a mini display option at present? What should I specify in terms of the monitor and connection? Is there something else I should do?

uhh unless ur macbook comes with other jacks other than the mini display port, i would say that is your only option.
so assuming that ur gonna go with hidef monitor, you will need...
the mini display to hdmi adapter like this (of course there are much cheaper options out there)
and the actual hdmi cable
and enjoy!
EDIT: link fixed

Similar Messages

  • Is it possible to attach 2 monitors or TVs on a MacbookAir?

    Hi all,
         Could you help me please?
         Is it possible to attach 2 monitors or TVs on a Macbook using HDMI/DVI-D Cables and split the macbook's image on these devices?
         Thanks in advance!

    JasonFear wrote:
    I've got a Matrox Dual Head 2 Go hooked up to double 24" monitors on my 13" MBA as we speak (over MiniDisplay Port). So it'll absolutely work. Thunderbolt will allow you to daisy chain devices over a single outbound wire, whereas with the Matrox setup you have a rather large box that interfaces between the displays and the machine. That's what is doing the heavy lifting and allows two (and even three) external monitors over a single MiniDisplay Port.
    Very glad to hear this.  Is this a Matrox Dual Head 2 Go DP Edition?  I have the Digital Edition (which has VGA in and DVIx2 out) and with my 2006 MBP, I was able to use the DVI-VGA adapter, and get two 19" external monitors at 1280x1024 each (total rez 2560x1024) to work just fine.
    I just upgraded to the new 13" MBA and got a MiniDisplay Port -> VGA adapter, hoping it would just work. But it doesn't.  The resolutions that are in the drop-down are for the most part all single-screen resolutions.  If I choose 2048x768, both screens fire up, but 1024x768 looks fairly horrible and I'd rather do just the single screen at 1280x1024.  But I sure am missing two screens right now
    Thank for your help.

  • New monitor sleeps and causes computer shutdown

    My system was working fine until I purchased and installed a new HP Pavilion 23bw monitor. We've got the monitor set for maximum resolution (1920 x 1080), which should be well within the capability for the dual ATI Radeon HD 5670 graphic cards we have installed.
    The monitor has been going to sleep at strange times while the computer is up and running, often in the middle of a browsing session. The monitor loses a signal and cannot find one, cycling through them all and coming up empty even though it was JUST talking to the computer.  I haven't noticed any common thread as to when it loses the connection... it can be anytime while I'm doing anything.
    Probably a related issue... I've got an old game called Stalker that I was using to test the monitor, and if I run it long enough (in any resolution), the computer shuts down.  The monitor goes dark and then the computer powers down. Usually on reboot, the monitor initially works but "sleeps" and loses connection before the windows login screen is reached... a second reboot is necessary to bring the system back up properly.
    Let me be clear, this is behavior that wasn't happening two days ago with our old monitor... the odds are that something with the monitor is the issue, as that's the only piece of hardware that changed.  To clarify: the computer shuts down while playing a 1st person shooter game, and the monitor "goes to sleep" and loses signal during more normal operations.
    I originally attached the monitor using the VGA cable, but I have switched that to the DVI cable and am seeing the same behavior.
    I'm running Windows 7 SP1, and the driver information is as follows:  Driver date: 3/20/2013, Version 3.0.0.0 (monitor.sys version 6.1.7600.16385).  
    I would appreciate any help, as this is incredbily frustrating.  Thanks in advance...

    Hello,
    What computer model do you have?
    If you use your old monitor now, does this problems go away?
    Can you try to make a monitor reset on the menu of the monitor? Its called factory reset.
    Have  you installed HP Driver for the monitor and HP My Display that comes on the CD?
    If you havent install the driver, try to do it and if you have installed HP My Dispplay, do remove it.
    Let me know.
    THanks,
    I work for HP! Please remember to provide and if this helped click ON

  • New monitors resolution effects on block diagram

    I recently got a new PC from IT with quad display outputs.
    I got new monitors with different resolutions from the old monitors I was using.
    Has anyone noticed when opening old projects on a new display that the block diagram layout becomes a lot different ?
    For example, look at the attachment, look how large the "Bundle by name" box is, and how it has consumed all objects around it.
    Solved!
    Go to Solution.

    Did you go from a PC that was running WinXP to Windows 7?
    The default system fonts for Windows 7 are a size larger than the WinXP fonts.  And generally LabVIEW uses one of the system defined fonts on the block diagram.  (Also, on the front panel.)  So when you make the change from XP to Win7, everything looks larger, and stuff that was lined up neatly before is no longer lined up and can overlap.
    Search the forums for Win7 fonts.  There are several threads that discuss this.  You can add some items to the LabVIEW.ini file to define the block diagram, front panel, and the system, application, and dialog fonts to be related to a specific font rather (such as Tahoma 8 in XP, rather than the windows defined font which changed over to Segoe UI 9 on Windows 7.

  • DULL colors only on  Adobe photoshop CS2 after buying a new monitor

    Hi,
    I'm hoping someone can help me!
    Recently I bought a new widescreen LG monitor L206WTQ - which I had plugged in and installed the drivers etc etc! The screen works fine.
    I decided to open up my Adobe photoshop CS2 for the first time, to do some photoshopping (also to see what adobe would look like on my new monitor) ...and when I opened the my adobe, a error message popped up saying something like "your monitor 'LG monitor L206WTQ' is defected ... ..." - Now because I wasnt too sure what the message mean't, I just closed the message window and continued to work on adobe - which actually seemed to be running fine - only untill i relized that I could not get the true color WHITE on my color palete!
    I searched google for the problem and to my amazement ... I found a forum that answered my question. The forum told me to go to CONTROL PANEL > DISPLAY > COLOR MANAGEMENT > and then once I was here, click ADD to add the AdobeRGB1998.icc file and set it as the default color profile.
    I accepted these settings and opened up my Adobe to find that it WORKED ... I could get the true color white again.
    BUT! ... now I have found another problem and this is where I need your help. I was searching for photographs on my computer to photoshop on Adobe and when i opened up an image on adobe ... I noticed that the color of the photo is SLIGHTLY DULL compared to the original - Almost as though Adobe made the image a little less brighter. I double clicked on the photo in my MY DOCUMENTS FOLDER, so that i could compare the image to the one on adobe and I was right ... the image did look a bit more dull on Adobe. I thought maybe it was that particular image but every photo I open up on a Adobe now, becomes slightly dull.
    Strangely enough ... when I edit a photo in Adobe and save it under these "dull" conditions ... and open the edited image in my MY DOCUMENTS folder, the images color is back to normal!
    Why do all my images get this 'dull' condition only when I view / open them up in adobe???
    I can't find a forum that has an answer to my question and I'm just hoping one of you experts can help me out, thanks in advance!!

    Dale,
    Photoshop is colour managed. This means when sending RGB to the monitor it uses a profile that describes the monitor's behaviour.
    In order to display colours properly it has to change the RGB values sent to that specific monitor. The device profile is a set of offset values that is typical for that one monitor.
    Your current profile probably belongs to your previous monitor. Recalibrate an profile your monitor.
    Read this:
    http://www.computer-darkroom.com
    Rob

  • Where can I find a new monitor for my older MacBook Pro 13.3" laptop?

    Any help for finding a place to buy a new monitor for my older Apple Pro 13.3?

    Do you need a new screen? Visit ifixit.com.
    Clinton

  • Recommendations for a new monitor?

    Greetings,
    I'm looking for a new monitor for my Powermac G4 450 MHz AGP (sawtooth).
    I'm currently using a Formac Gallery 1740 after 6 years it's starting to faded out on me.
    I'd really appreciate any suggestion or Recommendations for a new one.
    Aisha K.

    I'm using a 17" LCD, Acer model AL1706 on my G4 400MHz AGP. Was plug 'n play and has been flawless over the years. I'm sure the current model numbers are different.
     Cheers, Tom
    Here's some Acer model LCD monitors.
    http://www.amazon.com/Acer-19-inch-Flat-Panel-Monitor/dp/B0002X8TVW
    Message was edited by: Texas Mac Man

  • Mac Pro (Early 2008) failing with new monitor

    Hi All,
    I am having a strange problem with my Mac Pro and new display (ViewSonic VX2703MH-LED 27-Inch LED-Lit LCD Monitor). I first noticed some strangeness when I attempted to temporarily run the maching on a new Samsung HDTV that doubles as a computer monitor. I am using a Mini-DV to HDMI adapter, which worked great on two Samsung monitors I'd previously purchased. Anyway, I returned those because I needed ones with standard VESA mounts. So when I plug any of the new monitors in, I am getting some very unstable behavior. Sometimes the mac won't even start up, not even in safe mode. I was able to check all of my disks and zap the P-RAM, and all seems OK, yet every time I am able to startup and login successfully, it crashes after a short while after the display starts acting up. Horizontal and vertical lines come through and all of the color gets messed up. Sometimes my startup screen looks like this:
    I found a table on apple.com that shows which Mac models can use Mini DVI --> HDMI adapters, but it is incomplete - it doesn't mention the Mac Pro from early 2008 at all. I was going to install Mavericks, hoping that might help, but I couldn't burn a bootable DVD copy of Lion because it is a tad too large for a DVD, even though I've read on several sites that this is possible! I am scared to blindly do the upgrade, because I am pretty sure this is some kind of hardware issue. Anyone have any experience with this? I don't think it can be just the Viewsonic monitor because I had similar troubles on the Samsung TV...however the previous Samsung monitors are not here to test. Any insight appreciated!

    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • HT3014 my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.

    my mac has the VGA port and I need a newer monitor for it. what do I use that will connect it. I had a new dell monitor and none of the things that dell said worked. so I am going to get a mac monitor for a second unit.
    my laptop is a 2008 model

    Hmmm... 2008 MBP has...
    Video (Monitor):     1 (DVI)
    Details:     Supports external display in dual display and mirroring modes. VGA output provided by included Apple DVI-to-VGA adapter, S-video output provided by optional adapter (sold separately).
    http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2 .5-15-early-2008-penryn-specs.html

  • Please help.  Photoshop isn't displaying colors correctly after new monitor/calibration

    When I open JPEGS or RAW images in photoshop they have a dull, flat color to them.  This is happening after recently buying a NEW PA271W wide-gamut display and calibrating it using Spectraview 2.  It doesn't matter whether I have the Working Space in PS set to Adobe RGB or sRGB under color settings... The only way I can make my image look normal is to go under settings and ASSIGN PROFILE to Adobe RGB.  It looks fine then.  I could live with that, except the bigger problem is that I begin my editing process in RAW, where the colors are also looking flat.  The best I can tell, there is no way to assign a profile at this stage... and I don't even know if that would help. 
    I've been working in photoshop many years and I do know that RAW images have a 'flatter' appearance to being with, but this is something completely different.  For example, when I slide photoshop onto my other monitor next to it (I have multiple monitors) - the color reverts to the normal color I want .  And if I then slide photoshop back onto my new NEC monitor, the normal color actually stays intact for about two seconds, then reverts back to the dull color.  So I am unable to begin my work process in RAW since the colors are wrong.  Also, I know that my new monitor is capbable of displaying my images in their proper colors because when I use any of several different image viewers I have - irfanview, etc. - everything is fine.  It's only in photoshop.  Any help will be greatly appreciated.  Thanks, Chance.  Oh, and I have CS5 and I'm using Windows 7.

    What you're describing sounds like your display profile is incorrect.
    Don't mess with the working space, don't assign profiles -- just fix the display profile.

  • New Monitor, Old Computer Compatibility

    I have a new(ish) Acer monitor. It's only 17.5" apparently, but its native resolution is something like 1600 x 900 and 32-bit colour, though I think it can handle lower resolution if need be.
    I have a Sawtooth with a Rage 128 Pro graphics card.
    Will the latter be able to handle the former? I have the DVI cablery necessary to connect them, I'm just concerned that Sawtooth's antiquated graphics card won't want anything to do with the new monitor (even if my Intel Mac Mini can set it to a lower resolution as desired).
    Additionally, the Sawtooth will be running OS 9 and will need to boot off an external hard drive or install CD.

    OK, thanks. The monitor worked after all. (Once I finally requisitioned it for the afternoon.)
    Sawtooth is now running Mac OS 9.0.4 (found a copy on Macintosh Garden; my own CD is long since lost to the mists of time.)
    Sawtooth briefly ran OSX 10.4.11 since I had to boot it off my external drive to reformat its internal drive (which was pulled from a PC; Windows NT format, and had some X86-friendly version of Linux on it). It was a somewhat aggravating experience trying to run Tiger on a 400 Mhz processor.
    For some reason, it wouldn't boot off the install CD, though. (I booted it into OS 9.2.2 off the external drive and it mounted the install CD; it just wouldn't boot off it. Luckily, OS 9 doesn't need to boot off the CD to install.) I wonder why that is.
    PS— Seems they redesigned the support forums. The old one was better.

  • New monitor now screen way off center at proper resolution

    Hi
    After my monitor died I got a 24" LED Combo Television/DVD player FLDC2400 60hz, 1080p resolution by Fluid.  The guy in the shop said it would work as a computer monitor.  The only problem is that when I have it set to the recommended resolution (I clicked on that 'detect' button in the control panel display settings) the image is clear and sharp but waaaaay off to the right, cutting about 1/8 of the display and leaving a thick panel of black over the other side.  If I make the resolution lower it centers again but then everything has that low quality fuzzy bloated look to it.  Is there something I can do so that the proper resolution screen works?
    Thanks!  And if anyone is kind enough to answer please know I am a computer dummy so explain things as you would to a five year old!!! :-)

    Hello @rachel_maria,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your new monitor displays the desktop screen at an improper screen resolution to the far right. Does this issue occur when connected to a different computer? What is the resolution set for your desktop? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. 
    How Do I Find My Model Number or Product Number?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I want to have Mail list Received e-mails chronologically without attaching new e-mails received to older e-mails from the same recipient.  Is their a Preferences setting or a toggle to set this?

    I want to have Mail list Received e-mails chronologically without attaching new e-mails received to older e-mails from the same recipient/with the same title.  Is there a Preferences setting or a toggle to set this?

    View menu.
    Uncheck "Organize by Conversation."
    Regards,
    Barry
    BTW: Mail is part of the bundled "System software" and is discussed in the community for your version of OS X:
    Mac OS X v10.7 Lion
    The link will take you there.
    Edit: I see someone has requested a transfer, and this conversation is now in the correct space.
    Barry

  • I need a new monitor

    Can anyone give me some advice on buying a new monitor? My Apple 17" has sadly died and looking for a 19" screen. I have been advised to go for a Samson but with so many brands Im a bit confused about which way to go... Also do I go for a VGA or DVI input? My graphics card is a a radeon 9600 pro-hope some one can help

    John
    I was using two large vga monitors for video editing cause I thought they mimic tv colour more closely.
    two monitors has its advantages and disadvantages, I still use dual leds on my pc - great for when you have to compare documents and ultimately you get more "real estate" BUT an individual ap (or picture) can only be as large as one screen....
    ok, you can set it so you stretch an app across two screens but thats really not kewl IMO.
    So I got a 24in Acer for the Mac. It allows me to have FCP (or apps that have small characters) to use the whole screen
    I got Acer model. X243w. Im my brief research, I thought this was the best bang for the buck and Im happy with it.
    M/

  • Images look too light on new monitor

    Hi,
    I hope you can help me. I've been working in CS5.5 on two Dell desktops, using two Dell Ultrasharp monitors. The color was consistent on both. I created files on the newest of the two computers, viewing them on the Ultrasharp 2311 monitor. The files were used to produce both printed and digital books, and everything looked good. Note - I'm not a graphic designer. I never calibrated the monitors or made any adjustments to the settings, either in the system display or in PS.
    I just retired the oldest computer and bought a new Dell computer, along with the Ultrasharp 2711 monitor, which has excellent reviews. The files that look fine on my two-year old computer/monitor are too washed out on the new monitor. Dell couldn't figure out the problem and sent me a new monitor, which didn't change anything. The technician at Adobe could see the problem and we played with the settings, but couldn't fix it. If I go to Proof Setup/Monitor RGB it gets closer, but it's still too light. I never made this adjustment on the older monitor.
    I KNOW the files produced on the older monitor work, because I've seen the finished printed and digital books. Manipulating the file on the new system isn't the answer. There must be some setting that needs to be adjusted, but neither Dell nor Adobe can help me.
    By the way, my older monitor looks fine connected to the new computer, so it's not a computer issue.
    Can anyone point me in the right direction?
    Thanks so much,
    Chris

    Thanks Peter & Sid. I appreciate the advice, but it doesn't match our experience over 12 years of designing web applications so I'm having trouble understanding what's different, can I ask for any more advice you might have?
    If we calibrate the monitor using the recommended tools, will Photoshop images look 2-3 f-stops brighter (i.e. as they should look) and will images in all other apps (which look fine now, have always looked fine) look 2-3 f-stops too bright? Or would we be changing JUST the way Photoshop sees the images?
    Through probably a dozen different previous CRT and LCD monitors, we've never calibrated anything. Even on our immediately-previous Samsung 213T monitor, images appear pretty much the same in Photoshop as they do in all other places. That includes published web sites viewed with several popular browsers and viewed on literally hundreds of different systems inside and outside of our office.
    The previous monitor was being used with exactly the same software and hardware as the new one. The only thing that's changed is the monitor.
    Peter asks about brightness or white point luminance. I haven't used any tool to determine that. The monitor is set to 50% brightness, for whatever that's worth, but I can tell you that it is substantially BRIGHTER on white than the previous monitor. The previous Samsung monitor is being run side-by-side with the new one, and it looks quite dull and yellow beside the new one (and we thought it was a great monitor!) The new 30" Samsung has MUCH whiter whites. Does that help even a little?
    Thanks for any further advice.

Maybe you are looking for