Attachment Links are Not shown in Equipment After System Copy

We had recently a system copy from Pxx Client to Sxx Client.
On the P client we had attachments to equipment which was attached using IE02. We did a system copy but we could not find the attached links in the equipment on the S client.
The Content Server was also copied accordingly and an interface is already present between the S Client and Content Server.
Refer the screen shot to see the difference
This is source
This was in the target.
Can someone help why this difference is happening.
Thanks

If you are using ad block, ads won't be displayed.

Similar Messages

"Table VSEOPARENT is not in the database" after system copy to x64

Hi SDNners,
We've just completed a system copy of our SolMan 3.1 system onto a new
(Xeon x64 based) server. This system copy is part of the process of
moving SolMan 3.1 from an old server onto 64bit hardware and then
upgrading it to SolMan v4 and Oracle 10G.
Although the system appears to start properly in the MMC, we are unable
to log into the system through SAPGUI - we get a SYNTAX_ERROR window
instead of a logon screen.
I've checked the SysLog from within the MMC and noticed a number of
errors stating:
Database: Table VSEOPARENT is not in the database
Database: Table VSEOIFIMPL is not in the database
Database: Table VSEOIFCOMP is not in the database
I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
it confirmed that the table didn't exist. I then ran the same command
on the source SolMan system and it showed that VSEOPARENT DID exist. I
don't understand how these VSEO* tables could have gone missing between
the source and target systems.
I've searched OSS for VSEO* and cannot find anything. Please help!
Thanks,
Arwel.

Hi Arwel,
how exactly did you copy the database to the new server?
the tables you stated are an essential part of the ABAP runtime environment, so the syntax error is surely because of these tables are missing.
Regards,
Pascal

Fuiji RAF pictures are not shown in LR6 after import.

All Metdata is there but Histogram shows "data are calculated...". In LR5 imported pictures are shown in LR6. Does someone know what I Need to check?

I guess you mean this Icon Actually it means that the Picture is synchronized with LR mobile, but did not sync These Pictures, but had them uploaded on my iPad while I was travelling. Will do new Pictures and see what happens, when I Import These in LR w/o checking them before on my iPad.

GOS - Attachment - Link is not deleting from SRGBTBREL

I have created custom transaction and this have option to attach desktop files (ie Word, Xls, PPT, PDF) etc into this transaction. For this i am using class CL_GOS_MANAGER.
After the attachment sometimes users will delete the attachments from attachment list.
My problem is some attachment links are not deleted completely from SRGBTBREL (Link Table) . Because of this next time users displaying the attachment list still the deleted entries are showing in the list.
If users double clock it is giving a error message "Document does not exist" ( message class SO and message Number 006) .
Any body come across this kind of scenario?
Given below is the code for deleting the attachments
* Object creation of GOS View
    create object gos_view
      exporting
        ip_mode = 'D'.                     " Display Mode
* Start GOS Service for attachement view
    i_viewobj-objtype = 'YATT_ATTA'.
    i_viewobj-objkey = yatthdr-docno.
    call method gos_view->start_service_direct
      exporting
        ip_service = 'VIEW_ATTA'
        is_object = i_viewobj.
a®s.
Edited by: a®s on Feb 18, 2008 3:20 PM

Mylene,
Thanks for your info. I already saw this note. Please share if you any info how we can delete the SRGBTBREL links completely using class CL_GOS_MANAGER?
I already run the program RSGOSRE01 (suggested in the note 569123) But nothing is shown. But the document showing in the SRGBTBREL links it have attachment
For example , the following are the links from SRGBTBREL
BRELGUID                         RELTYPE      INSTID_B
475E7A046A581C0EE1000000A3F331A3 ATTA         FOL27000000000004EXT32000000033688
475E828FD2561C0DE1000000A3F331A3 ATTA         FOL27000000000004EXT32000000033775
476515A0A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034502
47651683A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034503
Here the last link still showing in the table , but i find there is not attachment
47651683A02A0E78E1000000A3F331A3 ATTA         FOL27000000000004EXT32000000034503
Any more Info?
Edited by: a®s on Feb 19, 2008 8:58 AM

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Images in mail are not shown after ios8 update

After update iOS8 the images attached in mails are not shown constantly, I configured my iPhone and iPad to show the images in mails but it is not working all time.
The issue is with photos sent from my ip cameras, these are showing for one mail and for other not.
Thanks in advance.

Actually yes!
I'm not familiar with fuse, but I found the action in line one of your third frame (on the main timeline) dubious, and a quick search lead me to try "portfolio._brightness = 0;" as first line (and I commented out the original line) that worked.
My quess is that whatever template or original file you've been modifing/adjusting used some kind of color-fade in at that point, and you somehow broke it.
To me it looks ok without it, but you let me know if you need further guesswork from me.
cheers
M

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Close, new, back, forward icons are not shown

Close, new, back, forward icons in firefox are not shown, so it makes difficult to use firefox. I am using latest firefox in ubuntu 11.04.
Already asked here but no response :( superuser.com/questions/559381/in-firefox-back-tab-close-new-tab-icon-is-not-shown I have posted screenshot there, It will be helpful so posting the link here.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

PDFs are not shown correctly at more than 150% size

Hi,
we use Adobe Reader 8.1.2 and we can´t change it in our company.
we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
Does someone have the same problem AND a solution?
Hajo

Hi,
I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

Embedded Fonts are not shown anymore

When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

Permissions are not shown correctly in Get Info on Snow Leopard client, using Tiger server w/ ACL's

Invoking "Get Info" on a file or folder which is on a shared volume hosted by a G5 running Server 10.4 fails to show meaningful permissions when done from a 10.6 iMac. It says only that the user has "custom permissions", which is true since there are ACL's in operation. However, the Owner and Group POSIX settings are not shown, only the Everyone setting shows, making it impossible to determine which user created the file (in order to resolve issues when permissions prevent intended action). The same file or folder will show Owner and Group on 10.5 systems, as well as at the 10.4 Server itself, so we do have a workaround. I have noticed, though, that I have run into permissions restrictions where I should not, such as creating a folder on a shared volume using a 10.6 system, and then not being able to save into that folder from the same system/user.
Is there something about the implementation of ACL's in Tiger that confounds Snow Leopard's Finder?

Hi,
I did two things to get it working, and haven't taken the time to sort out which did it. But it is working so it's good enough for me.
First I followed TeenTitan's suggestion, and also checked "Allow printing from the internet". I'm behind a firewall so not too concerned I'll get someone's odd photo on the printer.
Second I went back to server admin, selected the queue under queues in the Print service, then selected IPP and deselected LPR. Bonjour went grey but stayed checked.
After this I see the printer with "@ server name" appended, and it added the printer drivers like it should.
So all working well.

Input and output varaiables are not shown

Hi,
I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are greyed out. I am not sure whether am missing any configuration. Please let me know if anyone have workaround for this issue.
Thanks,
Sivakami - SEMC SAP team

That is interesting. The first (AES) is producing a 128-bit key, the second (aes) is producing a 256-bit key.
Producing a 256-bit key should not be possibe without the JCE/JCA Unlimted strength policy files installed, I have those files, installed, do you?
If someone who doesn;t have ththe policy files installed tried it, what do they get?
I would suspect that the case-sensitive nature of the underlying JVM is causing it to choose a different Crypto Provider when you use aes than when you use AES. The JVM that ColdFusion ships with (and the standard JVM) have severa crypto providers to choose from, plus ColdFusion Enterprise and Developer addition also include the BSafe Crypto-J provider), I think there are 10-11 total.
I would log a bug for this.
FYI, you can control this by using the optional keylength argument in generateSecretKey()
These two statements will produde keys with the same length.
#arrayLen(binarydecode(generateSecretKey("AES", 128),"base64") )#
#arrayLen(binarydecode(generateSecretKey("aes", 128),"base64") )#

Downloaded iOS Dev videos but some are not shown as downloaded in iTunes U collection

This is a 2 day old Mac Mini so maybe something is not set correctly.
I chose to download the iTunes U collection of iOS Development videos.
12 videos downloaded OK and I have been watching, the others downloaded but are not shown as downloaded (the 'Get' is still shown).
An example is the Effective iPhone App Development - Part 1
I have downloaded this now 3 times and logged out and back in, closed all applications and opened them again with no effect.
There was a comment in one Apple forum that suggested video restrictions may be preventing some downloaded videos from being displayed.
As far as I can see there are no restrictions set.
Must admit to being a bit stuck on this one.

I had the same problem. This seems like a bug.
I discovered a workaround for this problem:
Open your "iTunes Media" folder (usually at /Users/YOURUSERNAME/Music/iTunes/iTunes Media).
Inside "iTunes Media" should be a folder called "Downloads". Open it.
Now switch over to your iTunes application and start downloading the video.
Now switch back to the iTunes Media "Downloads" folder. A folder named "iTunes U" should appear. Open it. Now open the next folder which should be called "Effective iPhone App Development - Part 1 _ iOS Development Videos.tmp". Inside this temp folder you should see a file called "download.m4v" which we will deal with later.
IMPORTANT. While the video is still downloading, drag and drop any file (like a random text file) from a different location into that temp folder. If you don't drag and drop a file into the temp folder, iTunes will automatically delete the "download.m4v" video file right after it finishes downloading.
After the iTunes application is finished downloading, you can drag the "download.m4v" file out of the temp folder and onto the desktop or a different folder of your choosing. This file can now be viewed with Quicktime or any other video player.
Hope this helps!

KM content exoport with ICE: External Links are not transported

Hi,
We have to move KM content from DEV->QUA->PRD, so we've set up ICE. ICE is working without any problem. All Objects are transported, but there is an exception,External Links are not moved. (Internal Links are transported correctly!)
We are using Portal 2004s (sap.com/SAP-JEECOR 7.00 SP8, sap.com/SAP-JEE 7.00 SP8)
We tried it with Portal Drive, but External Links are not possible to be copied. (I can see the file for a short time(1-2 sec) in the target folder, but after refresh it disappears from the folder.)
Does anyone have experienced such an issue, do you know any ideas to resolve this problem?
Any help is greatly appretiated
Best regards
Richard Palotai

Seems to be the same for me.

Attachment Links are Not shown in Equipment After System Copy

Similar Messages

Maybe you are looking for