Attachment through interface table (OE_HEADERS_IFACE_ALL)

Dear,
i have make customization in Order Management Module
currently i am loading data through interface tables i.e
OE_HEADERS_IFACE_ALL
OE_LINES_IFACE_ALL
now, a new requirement is generated by the management to make the attachment in the customized application. User will write the long text in the text field and after the interface table has been processed through ORDER IMPORT request. text will be saved in the attachment tables i.e
fnd_documents_short_text
fnd_documents_tl
fnd_documents
fnd_attached_documents
Kindly Guide,
Regards

See Add Attachement to Sales Order
Sandeep Gandhi

Similar Messages

How to update Supplier and Supplier Sites through interface tables

Hi All,
Working on EBS Version 11.5.10.2
I have a requirement to update flags in Supplier and Supplier Sites.
Interface Tables : ap_suppliers_int
ap_supplier_sites_in
1. ap_suppliers_int :
Field name : hold_unmatched_invoices_flag
2. ap_supplier_sites_in :
Field name : hold_unmatched_invoices_flag
The Flags to update in base tables
1.base table name : po_vendors
Field to Update : hold_unmatched_invoices_flag
2. base table name : po_vendor_sites_all
Field to Update : hold_unmatched_invoices_flag
Please let me know is there any API for updates.
Thanks and Regards

Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=ap_supplier_sites_in+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=po_vendors+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=po_vendor_sites_all+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=hold_unmatched_invoices_flag+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to Find PO Number after Importing PO through Interface Table

Hello All,
I am Importing PO through an Interface. now I wanted to find PO Number(Segment1) which has been created.
Please tell how to find PO Number....?
Thanks in Advance
Regards
Ravi Raj.

Got Answer

AR customer creation through interface tables

Hello Gurus,
In an R12 upgrade, we are planning to import customers/sites into Oracle AR from a third party system.
Can you point me to an example or a good documentation that talks about which columns are mandatory etc.
Thanks,
Vinod

Pls refer:
AR: SAMPLE DATA TO INSERT NEW CUSTOMER USING CUSTOMER INTERFACE RACUST [ID 1070155.6]
How to insert a customer via Customer Interface [ID 176863.1]
thanks

EPMA 11.1.2.1 Interface Tables Aliases are added as orphans

Hi,
I am setting up an EPMA shared library through interface tables and my aliases are not being recognized as aliases. EPMA is trying to import them as members and cannot find a hierarchy, so it is adding them to my shared dimensions as orphans.
In my database, I have it set up as follows (for simplicity I will only use 1 dimension (Years) and the alias for that dimension).
IM_DIMENSION
LOADID-----C_DIMENSION_NAME-----C_DIMENSION_CLASS_NAME-----C_MEMBER_TABLE_NAME-----C_HIERARCHY_TABLE_NAME
NULL-----------YEARS-------------------------YEAR-------------------------------------NULL---------------------------------YEARS_VW
C_PROPERTY_ARRAY_TABLE_NAME-----C_DIM_PROPERTY_TABLE_NAME
YEARS_ALIAS_VW-------------------------------NULL
In my YEARS_VW I have
LOADID-----PARENT-----CHILD-----ISPRIMARY
null-------------YEARS--------FY09----- 1
null-------------YEARS--------FY10----- 1
and i have this for FY09- FY16 (The alias will be the year written out 2009, 2010, 2011, 2012, etc)
My alias view looks like this:
LOADID------PROPERTY------NAME------KEY------VALUE
null--------------Alias---------------2009-------Default---null
I have a row for each year 2009-2016
Within EPMA, I created the alias dimension and the years dimension. I associated the alias dimension to the years dimension. I also created the import profile for the years dimension (PROF_YEARS). In the Map Dimensions section I have the dimension Years mapped to the Years shared library and selected replace as the process type. In the mapping options, only the alias column shows up and it is automatically mapped to Alias.
When I run the profile, I get the following errors:
"Member '2009' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2010' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2011' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2012' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2013' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2014' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2015' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
"Member '2016' will be added but it is an orphan. Please check the Hierarchy Section/Table for member"
(I get this error for each alias that I have)
The members all get added correctly, but the aliases are not being added as aliases, but as orphan members.
Any help you can provide would be greatly appreciated.
Thanks,
Daniel

If you are just using the default alias and you want to put an alias against a member then you include it in your hierarchy table.
You would have a column called ALIAS=DEFAULT e.g.
LOADID-----PARENT-----CHILD-----ALIAS=DEFAULT------ISPRIMARY
null-----------YEARS-------FY09----- 2009----------------------1
You would then map the column in the import profile
Cheers
John
http://john-goodwin.blogspot.com/

Release Sales Order through Interface ?

Hi
Anyone can guide me that How to Release the Sales Order through Interface table .
This is an urgent need.
Thanks in Advance to all of you.
regards
Sanjay

Hi,
Your question : What is the difference between Release Sales Order Form & Shipping Transaction Form?
In Apps, Release Sales Order Form is basically used to move Material from Inventory to your staging area e.g stock yard (pick release activity), at this point the material is still inside your premises..
Shipping Transaction Form is basically used to move material from staging area to customer site..
Your 2nd question is : Pick Release can be done from both the forms.What is the difference.??
Through Pick release form you can do pick release where you don't need any grants... and to do the same through Shipping Transaction form you need to have access rights to do ship confirm and pick release.. In other words, Through Shipping Transaction form you can restrict/allow user to do pick release where as in Pick release form no such restrictions are there..
Shipping Transaction form is basically a combo package :) through which you can control Pick release, Ship confirm, Delivery etc..
For the Grants and Role you can check details under : Setup --> Grants and Role Definitions --> check Grants & Define Roles form..
Roles form will let you what are the actvities can be done and can be assigned to users..
Hope this will help...
Regards
S.P DASH
Edited by: spdash12 on Oct 27, 2009 10:43 PM

Why Base and interface tables mandatory column are differant ?

Hi guys , i have load supplier into AP(ap_suppliers) through Interface table(ap_suppliers_int) but my confusion is that ap_suppliers have 8 mandatory columns but it's interface ap_suppliers_int have only 2 mandatory column.why?and also with these 2 columns record is successfully loaded into base so how it's get other mandatory columns value in base table or leave it .
Regards,
Shakeel khan
Edited by: shakeel khan on Mar 14, 2010 8:32 AM

Hi,
Refer to Oracle Payables Reference guide, section "Understanding the Suppliers Open Interface Tables"
Here is an extract:
The intent of the Supplier Open Interface Import is to emulate the entry of Suppliers,
Sites, and Contacts through the Supplier Entry form as closely as possible. As such,
there are many values that will be automatically defaulted if not provided by the user.
These defaults for Suppliers can come from AP_SYSTEM_PARAMETERS_ALL,
FINANCIALS_SYSTEM_PARAMS_ALL, PO_SYSTEM_PARAMETERS.ALL,
RCV_PARAMETERS, or hard-coded values. As these source tables are organized by
operating unit and the supplier data is not, the Suppliers Open Interface Import
program assigns a default organization to each run based on the responsibility of the
user initiating the concurrent request. This is necessary in order to determine which
default values to assign to supplier records.
The defaults for Supplier Sites generally come from the Supplier record. However, in
certain cases due to multiple organizations considerations, it is necessary to default
values for Supplier Sites from AP_SYSTEM_PARAMETERS_ALL or
FINANCIALS_SYSTEM_PARAMS_ALL.
J.

Limits on number of invoices put through AP Open Interface Tables

Hi,
a quick question.
We have multiple AP systems which we are thinking of interfacing directly with eBusiness Suite. With a potential of approximately 20,000 invoices per night/batch (each invoice will have on average two distribution lines). All invoices are going into a single organisation.
Does anyone have experience of this number of invoices (or greater) going through the AP Open Interface tables?
Steve
nb

This should certainly be possible - we process about 15000 invoices every night in under 2 hours.
HTH
Srini

Creating RMA Order through OE Interface Tables

Hi,
We are needing the ability to create RMA orders using the OE interface tables but we are running into an issue. The SOURCE_DOCUMENT_ID that is populated in Oracle Apps to link the RMA back to the original order does not get populated and there is no source_document_id column in the interface tables to populate manually. Does anyone know how we can get the SOURCE_DOCUMENT_ID populated for RMAs?
Thanks in advance for your assistance,
Troy

Hi Nagamohan,
I entered the reference_type, reference_header_id and the reference_line_id in the OE_LINES_IFACE_ALL (and a record in the headers iface, of course) and ran the Order Import. I set the reference_type to 'ORDER' but it didn't populate that on the new line record in oe_order_lines_all. And the source_document_id still is not populated. It did populate the referehcen_header_id and reference_line_id on the line, but we don't use those fields. We use the 'source' fields.
I also noticed that the source_document_type_id is populated on RMA order headers and lines that are copied and created in Oracle Apps but there is no place to pass this column to the interface. Do you know how this value and the source_document_id and source_document_line_id can be populated when creating the RMA through the interface?
Thanks
Troy

Bank Branch upload through open interface Table

Hello All,
I am currently doing Bank and Branch Conversion. My question is , is there any Open Interface Table available for bank and branch upload although there is api available .Please let know if any interface table and seeded program is available for bank and branch import.
Version : 12.1.1
Thank & Regards
Aboo

But RA_CUSTOMER_BANK_INT_ALL is not existing in the 11.5.10, 12.0 and 12.1.1.
One more thing, I am able to create bank, branch and bank account (for customers), once the bank account is created i am able to see in the database
select * from iby_ext_bank_accounts where EXT_BANK_ACCOUNT_ID = <ID> but when i am looking into the customer screen, i am not able to see the bank account data added to the customer account.
But i clicked on the Add button and looked for the bank account, it is showing. So every time when i am creating bank account for a customer, once created , do i need to add in the screen?
please provide any sugession , its confusing.
Thanks & Regards
Aboothahir

How to upload records in two different interface tables through WebADI.

We have created custom integrator with two different interfaces to insert records in AP_INVOICES_INTERFACES and AP_INVOICE_LINES_INTERFACE. Also defined the custom layout in which we mention the header and lines column info to be displayed in the spreadsheet. When I tried to create document to upload the records into the interface tables, could find two different interface for header and lines , when we select the header and upload records into the AP_INVOICES_INTERFACES table it was successfull. But couldn't upload records inserted in Lines interfaces tables. How do we upload records in both the table do we have constraint with Web ADI can insert records to only one interface tables. Any recommendation highly appreciated.

Raghu,
Thanks for the reply,
I have a concern, But if you are connecting a another database you have to create one more subreport and each time am creating connections across databases we have to create subreport and go for the design to show the record. Is it any way to have a common field or union records approach in crystal report 2008.
For Example :
Approach 1 :
Emp name Emp salary (Common Header)
Variable Field1 Variable field2 ( Iterations to be done here for records)
Variable field 1 contains ---> emptbl(employee name), b.emptbl(employee name) (A database, b database, c database or any .db)
Variable field2 contains ---> emptbl (salary info between databases)
Approach 2:
getting all the records and union all the records
Thanks
Murali Sri

How to populate DUNS_NUMBER in AR through Customer Interface tables

Hi,
We are working on Customer Interface using custome Interface tables and run the standard Customer Interface program.
As part of source data, we have data for D-U-N-S number, which should be populated to D-U-N-S number field displayed under Profiles Tab in Customer screen.
I believe that field refers to DUNS_NUMBER_C or DUNS_NUMBER in HZ_ORGANIZATION_PROFILES base table.
My question is what is the column(field) in Interface table to be populated which maps to the D-U-N-S number on the screen said above. ?
Appreciate your quick response.
Regards,
Ram

what you did?

Order Entry Interface table error handling through Form after Orderimport

Hi Gurus,
We are on Oracle Apps 11.0.3.
I'm just curious to know that is there any form available to correct error records in SO_HEADERS_INTERFACE, SO_LINES_INTERFACE, SO_LINE_DETAILS_INTERFACE, SO_PRICE_ADJUSTMENTS_INTERFACE, SO_SALES_CREDITS_INTERFACE, SO_SERVICE_DETAILS_INTERFACE, SO_LINE_ATTRIBUTES_INTERFACE, SO_HEADER_ATTRIBUTES_INTERFACE tables after running orderimport.
Most thread says that set REQUEST_ID, ERROR_FLAG and INTERFACE_STATUS columns to NULL in each interface tables. Is there any oracle standard form available to accomplish this in Oracle Apps 11.0.3 or 11i?
Thanks
-Manish

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

How to send zip file as attachment through email

Hi All,
I am having a requirement that I need to download the internal table data into .txt file and I need to zip the text file. And this zip files needs to send to the customer through email.
I am able download the data into .txt and able to zip the file. But I am not able send the .zip file through email.
I know that we can send .xls, .txt, .csv and also .ppt, .doc file types we can send as an attachement through abap program. But I don't know about .zip files. Is there any possibilty to send .zip file as an attachment thorugh email.
Can any one help me how to send a .zip file thorugh email as an attachment.
Regards,
vinod

hi Vinod,
Can you please tell me how you have zipped the file.
I am having a text file in application server. I need to zip that file. Then the middleware moves it to Legacy system.
I used the following code. With this I am having the data in Binary format which my midleware cannot understand.
What I need on the whole is just to reduce the size of the file.
form ZIP_FILE .
DATA: lt_data TYPE TABLE OF x255,
lt_textdata TYPE TABLE OF x255.
DATA: ls_data LIKE LINE OF lt_data.
DATA: lv_dsn1(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEX.TXT'.
DATA: lv_dsn3(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEXZIP.zip'.
*DATA: lv_dsn3(100) VALUE '/interfaces/SM5/test.zip'. " Contains sample1.xls and sample2.xls
DATA: lv_file_length TYPE i.
DATA: lv_content TYPE xstring.
DATA: lo_zip TYPE REF TO cl_abap_zip.
CREATE OBJECT lo_zip.
Read the data as a string
clear lv_content .
OPEN DATASET lv_dsn1 FOR INPUT IN BINARY MODE.
READ DATASET lv_dsn1 INTO lv_content .
CLOSE DATASET lv_dsn1.
lo_zip->add( name = 'sample.TXT' content = lv_content ).
lv_content = lo_zip->save( ).
*clear lv_content .
Conver the xstring content to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = lv_content
IMPORTING
output_length = lv_file_length
TABLES
binary_tab = lt_data.
OPEN DATASET lv_dsn3 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT lt_textdata INTO ls_data.
TRANSFER ls_data TO lv_dsn3.
ENDLOOP.
CLOSE DATASET lv_dsn3.
IF sy-subrc EQ '0'.
MESSAGE s999(zfi_ap_gl) WITH text-t10.
ENDIF.
Can you please help.
Thanks Aravind

How to send SMARTFORMS output as attachment through?

how to send SMARTFORMS output as attachment through e-mail?
after executing SMARTFORMS how to send that output via e-mail.
Help me.
thanks
surya.
Moderator Message: Please search for available information first
Edited by: kishan P on Nov 7, 2010 7:19 PM

hi Vinod,
Can you please tell me how you have zipped the file.
I am having a text file in application server. I need to zip that file. Then the middleware moves it to Legacy system.
I used the following code. With this I am having the data in Binary format which my midleware cannot understand.
What I need on the whole is just to reduce the size of the file.
form ZIP_FILE .
DATA: lt_data TYPE TABLE OF x255,
lt_textdata TYPE TABLE OF x255.
DATA: ls_data LIKE LINE OF lt_data.
DATA: lv_dsn1(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEX.TXT'.
DATA: lv_dsn3(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEXZIP.zip'.
*DATA: lv_dsn3(100) VALUE '/interfaces/SM5/test.zip'. " Contains sample1.xls and sample2.xls
DATA: lv_file_length TYPE i.
DATA: lv_content TYPE xstring.
DATA: lo_zip TYPE REF TO cl_abap_zip.
CREATE OBJECT lo_zip.
Read the data as a string
clear lv_content .
OPEN DATASET lv_dsn1 FOR INPUT IN BINARY MODE.
READ DATASET lv_dsn1 INTO lv_content .
CLOSE DATASET lv_dsn1.
lo_zip->add( name = 'sample.TXT' content = lv_content ).
lv_content = lo_zip->save( ).
*clear lv_content .
Conver the xstring content to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = lv_content
IMPORTING
output_length = lv_file_length
TABLES
binary_tab = lt_data.
OPEN DATASET lv_dsn3 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT lt_textdata INTO ls_data.
TRANSFER ls_data TO lv_dsn3.
ENDLOOP.
CLOSE DATASET lv_dsn3.
IF sy-subrc EQ '0'.
MESSAGE s999(zfi_ap_gl) WITH text-t10.
ENDIF.
Can you please help.
Thanks Aravind

Attachment through interface table (OE_HEADERS_IFACE_ALL)

Similar Messages

Maybe you are looking for