Attempting to copy to the disk "OS" failed. There is not enough memory available

I am trying to synch my ipad 2 with a dell studio windows 7 PC.  The synch failed with the following error message: attempting to copy to the disk "OS" failed.  There is not enough memory available.  Any suggestions/  Thanks

Take a look here and see if anything in this will work for you.
http://support.apple.com/kb/ht1207

Similar Messages

  • Itunes error message "file name here cannot be copied because an error occured. There is not enough memory available."

    Hello,
    I have an iPad 64gb. Been trying to load files on it with plenty of memory to spare. generally though i cant load more than about 35mb at a time before the message "file name here cannot be copied because an error occured. There is not enough memory available." pops up. I keep needing to close itunes, unplug my ipad, and restart it again. but the issue remeains the same.
    when i open up task manager i notice that memory usage by itunes goes from 95,000K to 1,750,000K in under 30sec which is when i get the error message. any solutions? currently running itunes on Vista.
    Thanks in advance.

    trash stuff form your computers hard drive to free up space.

  • "Could not be copied because an error occured. There is not enough memory."

    Hello,
    I recently got an iPad 64gb. And have since been loading all of my Comic backups onto it (Via Cloudreaders). I've got 32.5gb used and 26.4gb Free. Every 20-30 issues or so I get an error that says "Comic book name here" cannot be copied because an error occured. There is not enough memory available.
    Now the easiest way to fix this is to close iTunes and restart it - This will allow me to add another 20-30 so issues before having to do it again. However that doesn't seem to be right expecially when i'm unable to backup my ipad because I get this error.
    Is there anyone out there who can help me?
    Thanks in advance.

    Update:
    I upgraded to iOS 5. Same problem.
    New information:
    I've noticed my iTunes use from around 65,000 K int he Memory section of Processes (Windows 7). However right before the crash it's using almost 2,000,000 K in the memory section.

  • "attempting to copy to the disk C:\ failed. the file name was invalid or...

    "attempting to copy to the disk C:\ failed. the file name was invalid or too long." This was the message that I keep getting after trying to "add folder to library" of multiple tracks from an external hard drive. it only happens after a certain period of time.. i get about half of my tracks added before this message pops up. when i first got my i pod it worked fine. but after i hooked up my i pod several times without having that external drive on... the i pod took over that drive letter that my external drive used to use. so.. when i turned on my external drive, it was given a new letter.. then i tunes would not recognize those 1500 tracks that came from my external drive (explanation points listed next to tracks). so.. I deleted all of those files manually, then tried to add folder to library again from the new letter coordinating to my external hd. I kept getting that message above. after that i deleted all files associated with i tunes.. and uninstalled i tunes.. then did a reinstall.. did i tunes update from site... and tried to just add the set of tracks from that external hd... still same **** error. only now.. after i say ok to error... i tunes continues for like 2 seconds.. then has to shut down... ****!!! can anyone help me with this... anyone?

    just to update my problem... I finally figured out that i had to disable the "copy to my itunes folder from my library option. just so you know. apparently i tunes cant handle the large transfer to itunes and also at the same time copy it to your itunes folder... APPLE fix this!!!!!! this suxxxxx....

  • Attempting to copy to the disk " ipod " failed. Cannot read or write BS

    First please don't give me this link:
    http://support.apple.com/kb/HT1207
    Second my ipod worked fine until about a few hours ago, when i was adding new files now i get this error:
    " Attempting to copy to the disk " ipod " failed. The disk could be read from or written to. "
    I tried removing the files i just added but it didnt help. I tried restoring the ipod but it doesnt help. I know its not hardware problem. How do I find out what files are messing up my ipod.
    It works fine with everyhting but music. Also it will start syncing then randomly give me this message, i got up to 500 songs (that play fine, but then it stops and gives me this bs. i hvae 3000 + more that wont sync. Can someone please help me before i smash this thing?

    Eh, there could be an issue with one of the audio files it is trying to sync over. Best bet is to do a fresh restore on the iPod and then follow the steps in the following article to see if it addresses your issue. (and yes, I know it's not the exact error you're receiving, but try it)
    iTunes displays a -69 error when syncing iPod

  • How can i fix this for my iPhone4? "attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to. "

    i keep gettign this message when trying to drag music in itunes.
    attempting to copy to the disk "iPhone" failed because the disk could not be read from or written to.

    Can apply to iPhone as well >    'Disk cannot be read from or written to' when syncing iPod or 'Firmware update failure' error when updating or restoring iPod
    If you are using a Windows based computer >  iTunes for Windows: Gathering and using iTunes Diagnostics
    Ignore:  To repair an iPod disk—Restore the iPod or iPod shuffle using the latest version of iTunes.

  • Attempting to copy to the disk "IPOD" failed.

    message on comp:
    Attempting to copy to the disk "IPOD" failed. The disk could not be read from or written to.
    help?

    The quickest way to correct this error USUALLY is to restore your iPod. Make sure you have all your Music and stuff on your PC for a restore will wipe clean your iPod and then use iTunes to transfer everything back to the iPod off your PC. follow the link below on ways to correct this and links to info about "Restoring" your iPod
    http://docs.info.apple.com/article.html?artnum=301267
    Post back and tell us if this fixes your iPod or if you have other questions, I or someone else will be more than glad to try and help you

  • Help - Attempting to copy to the disk "J" failed. An unknown error occured

    pls help I get the above error Attempting to copy to the disk "J" failed. An unknown error occured (-69) when I connect my ipod nano 8GB Gen 3 and try to synch. Ive got the latest Itunes software, Ive done the 5 r's, Ive tried a different USB cable. I can't think of anything else left to try, when I d/c on my computer it doesn't bring up my ipod but under device manager its there, says its working properly

    This is the same thing that just happened to me. My error message reads as follows: "Attempting to copy to the disk "C's IP" failed. The disk could not be read from or written to". I've reset and restored. It still will not add the last 3 songs that I have purchased from Itunes. I have completely read the manual and can't find anything that deals with this problem. I have only had my ipod for 10 months. I hope someone can help with this.

  • Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

    Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

    Purchased film from itunes and want to download to ipad. Getting error message. Attempting to copy to the disk "OS_Install" failed. You do not have enough access priveleges for this operation.. Any ideas?

  • After trying to sync my ipad to a new pc, i get this error message "Attempting to copy to the disk "windows" failed.  the device is not connected."  but it is connected.

    I have been trying sync my ipad to a new pc and I get this message after the sync fails:
    "Attempting to copy to the disk "windows" failed.  The device is not connected."
    The device is connected, what is wrong here?

    This is a common problem that is most likely caused by files that are not marked to have proper read/write permissions.
    To solve this problem, follow these steps.
    1. Close iTunes.
    2. Using the finder, Ctrl-click the folder that contains your music files, then select Get Info.
    3. Ensure that the Owner is set to have Read & Write privileges. Choose to Apple to enclosed items…
    Once you have modified permissions, fire up iTunes and try to sync your music again. If it throws the same error message and still doesn’t work, research more about permissions in Mac OS X, as there could be something else not right with the permissions of your music files.

  • HT203390 when I try and sync my ipad 2 with my new XPS laptop i get a message that says "attempting to copy to the disk os failed." what should I do to sync my ipad?

    when I try synching my ipad 2 with my xps laptop i get the following message. "Attempting to copy to the disk os failed." How do I resolve the problem?

    It would be useful to you if they had a different name, but the computer knows they are different. Create separate sync playlists for each device and go to the Music tab when it is connected and specify which playlist should be used for the sync.

  • Attempting to copy to the disk "C" failed

    Hello everyone. Trying to sync my 3G and once it gets to synching purchased songs and applications an error box pops up with:
    Attempting to copy to the disk "C" failed. The disk could not be read from or written to.
    I have no idea what this means or what I can do about it. Help please.

    This article has a good set of troubleshooting steps: http://support.apple.com/kb/HT1207
    Have you tried them yet?

  • The iPhone could not be restored. There is not enough memory available.

    Hi guys,
    you all seem the be fairly acquainted with all possible iPhone problems. I was searching this forum for an answer to my problem. iTunes won't restore my iPhone because of an error mentioned in the title of this topic - The iPhone could not be restored. There is not enough memory available. I haven't found anything on the net that I haven't tried yet.
    Am using Windows XP, iTunes 7.4.3 and the iPhone used to be on the firmware 1.0.2. I was trying to do the restore but it gave me that error message. I tryed uninstalling everything with WinASO registry cleaner, iTunes, apple device thing(or whatever), installed it 3 times, tried to force the previous firmware with Shift+restore, but nothing. I also tried to switch USB ports. I followed the instruction on how to remove iTunes exactly like it was described in another thread - no success.
    Is there any help you can maybe provide, but don't tell me to go/send it to an Apple Store, since I live in Europe, where there is no official iPhone yet.
    PLease help

    iohen wrote:
    Hi,
    is there a newer version of iTunes than 7.4.3, which I am already using ?
    I don't think so.
    And no, the iPhone has not been hacked before, I was using it like iPod, internet browser and stuff. But no calls.
    My version of iTunes say 7.4.3.1.
    I assume that by saying that your iPhone has not been hacked before means "it has never been hacked."
    Are you paying AT&T for monthly service?
    I would still try to download a fresh copy of iTunes if possible.
    If it does not work, I think that you need to take the iPhone back to the Apple Store or call AppleCare for assistance. The store, and AppleCare, has a number of software tools to potentially diagnose the problems you are encountering.

  • I have been coping my cds.  Now I get this message:  The iTunes Library file cannot be saved.  There is not enough memory available.  How can I proceed?

    I have been copying my cds into my iTunes library.  I lost all my folders 2 years ago when I replaced my laptop and just now have the time to do this.  Right in the middle of copying my christmas cds I get a message that the iTunes Library cannot be saved. There is not enough memory available.  Help  How can I proceed?

    trash stuff form your computers hard drive to free up space.

  • Fork Function Failed.  There is not enough memory available.

    Hello I have gotten the following error with my Application 10g AS server:
    Fork Function Failed. There is not enough memory available.
    I have set the ulimit to unlimited for all categories for the Oracle User. I have set the number of processes per user to 2048 processes. I have 4GB of RAM and 6GB of paging space.
    I have also noticed that once I open the opmn services, even if no one is executing any commands, the Oracle User's processes are growing. I ran the following command to determine it: ps -ef | grep oracle user | wc -l. I also monitored some of the processes for sometime and they are not terminating in order to release the physical memory or the paging space.
    Can you please assist me with this problem?

    user483766,
    You will probably want to file a TAR and work through this with Oracle Support.

Maybe you are looking for

  • Cannot locate file, even after it's copied to itunes

    I download a mp3 from a radio show I like everyday. I use to be able to download the file to my desktop, and then drag it to the right playlist in itunes. After it's in itunes, I would delete the one on the desktop and I would have it in my library a

  • What's wrong with my drive? Dead Drive? ATA controller? Logic Board?

    Hi! I have had a problem with my iBook G4 1.33GHz for a while now. I've tried a few times to fix it and then have given up thinking replacement was the best option. I'll try to be brief but this saga has actually been going on for over 2 years. The b

  • Upload of Expenses and Revenues in Trail Balance

    Hi, We are in the cutover phase now and how we ulpoad the expense sand revenues in trail balance becz my client is insisting on this and while I doing the same the system is asking the cost object for the same how we will give this which does not exi

  • Probability Distribution Functions in Oracle PL/SQL

    Hello, I have the need to calculate some standard probability distribution functions as part of my PL/SQL code. Does Oracle DB offer any packages that will enable such calculations to be performed? In parituclar, i am looking for cumulative distribut

  • BDC uploading on the basis on first row

    hi experts, my requirement is, i have a flat file in excel with csv format, and i have the details of bank details with company name and debit account number and etc., in the first row, and from second row all the transactions done in that debit acco