Attendant Console could not connect to server after upgrade
All,
I upgraded a BE CUCM/Unity Connection server from 6.1.2.1000-13 to 6.1.4.2190-3 and after the upgrade, the AC client software could not connect to the CUCM server. After checking all of the obvious things and rebooting the computer on which AC client was running, I finally figured out a workaround. The CUCM server was configured with a host name of UCM1 and a domain of localdomain. The AC clients were pointing to UCM1. If I added a record in the client's hosts file (%WINDIR%\SYSTEM32\DRIVERS\ETC\hosts) which pointed UCM1.localdomain to the IP address of the CUCM server and then pointed the AC client to UCM1.localdomain, everything worked great. I'm just wondering why this happened. The client must pass the name of the server in the payload (rather than simply using the name to resolve to an IP address). So why, all of a sudden, does the server care about the FQDN? Just curious if anybody knows or has run into this same issue.
Regards,
Steven
Hazel,
Any chance you could send me a Wireshark capture of the traffic coming to/from one of the affected client PCs during the login process? Also, please include any log files in the client's AC application folder (or sub-folders) as well as event log data from the system and application event log for the timeframe spanning slightly before and after the login attempt.
Also before doing any of this please clear the DNS and ARP cache of the client PC:
ipconfig /flushdns
arp -d *
Regards,
Steven
Similar Messages
-
Could not connect to server after OS got blue screen, Pls help.
Hi Expert,
i want to ask about this error.
when i'm trying to log in in BO Universe designer.
I'm getting this error.
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Unable to log on: Could not connect to server ekawati-f4e1e59:6400. Please check that the server name is correct, and that the server is running.
(hr=#0x80042a01)
service database and BO is already running.
it's happening after my os got blue screen.
does blue screen affect that much to BO?
how to solve it?
Please advise.
Thanks.
Regards,
Y Permana.Thanks for your replied.
I checked in manage servers, the [BO server].connectionserver is stopped.
After i checked in services, the database(MySql) service can't turned on if the CMS service is already running.
is that ever happen in your experience?does it happen to other database?
Could you tell me, what priority to turned services whether database, CMS or BO server?
Thanks.
Regards,
Y Permana. -
Network error could not connect to server 127.0.0.1:5900
I have created a virtual machine in VM manager from a template and when I try to view the console I get the error "network error could not connect to server 127.0.0.1:5900"
The way that I have everything set up is this.... I am using Oracle VirtualBox installed on Windows 7 and I have created a virtual machine in VirtualBox with Oracle Virtual Server installed and I have Oracle VM Manager installed on that same virtual machine. After reading some forums I found out that I needed to install TightVNC to be able to use the console from Windows IE. So, I have installed TightVNC on my OVS but I can not even tell if it is running. I have also made sure that in iptables that port 5900 is open. I have confirmed this by using nmap to scan my ports and port 5900 is open for vnc when my virtual machine in vm manager is running. I just can not figure out why I am getting the network error unless TighVNC is not running on my OVS. Does anyone have any ideas for why this might be happeneing. ThanksHi,
it seemed when you registered the OVM server to the OVM manager, it did not deliver the correct hostname, but the local address instead.
See if your /etc/hosts contains the hostname in the 127.0.0.1 line.
Correct the /etc/hosts, remove the OVS server and reregister with OVM manager.
Regards
Sebastian -
EAS - Error: "Could not connect Administration Server
hello All,
i am very new to EPM
i have installed EPM 11.1.2.2 with web application deployed to single manage server
OS : windows server 2008
database : sql server
when i try to connect EAS console it gives me error
Could not connect Administration Server
any idea?If it has been deployed to a single managed server on the default port then you will need to add the server in EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/ -
Ipad 2 can not connect to server after 2 day internet outage
Situation:
Internet access was down 2 days and was just restored
Restarted router
iPad 2 connected to appropriate wifi network, but got error message "could not connect to server" when using Safari. Also, could not access any other internet related service like web email.
Other devices --- iPad air, Mac, PC laptop and 2 iPhone 4s ---- were able to connect and access internet successfully.
Actions Taken:
Powered off iPad 2 and then restarted it. No luck.
On iPad 2, turned off wifi setting and then turned it back on. It connected to appropriate network, but still could not connect to server.
Reset router again --- no luck.
Question:
Any suggestions?Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
Connection test to database failed: could not connect to server
I restarted one of my HPOV NNMi 9.23 servers this morning and NNMi is no longer loading. I am seeing the following errors in the logs indicated:
/var/opt/OV/log/nnm/public/nmsdbmgr.log
04/06/2015 09:28:05 AM Connection test to database failed: could not connect to server: Connection refused
Is the server running on host "127.0.0.1" and accepting
TCP/IP connections on port 5432?
/var/opt/OV/log/nnm/public/postgres.log
2015-04-06 09:25:55.312 EDT: :8580:0LOG: could not translate host name "localhost", service "5432" to address: Name or service not known
2015-04-06 09:25:55.312 EDT: :8580:0WARNING: could not create listen socket for "localhost"
2015-04-06 09:25:55.312 EDT: :8580:0FATAL: could not create any TCP/IP sockets
I checked /etc/hosts and found the following entry:
#; Local
127.0.0.1 localhost
From the command line I can ping localhost with no issue. Not sure why NNMi is not starting at this point.
This question was solved.
View Solution.I also attempted to do a reset using nnmresetebdb.ovpl. I recieved the following:
Attempting to reset the embedded database...
Starting nmsdbmgr process for database reset...
nmsdbmgr process did not restart successfully - please try reset again.
When I run ovstart -c I receive the following:
Name PID State Last Message(s)
OVsPMD 29831 RUNNING -
pmd 29832 RUNNING Initialization complete.
nmsdbmgr - NOT_RUNNING - Exit(1)
ovjboss - UNSTARTABLE -
nnmaction - UNSTARTABLE -
ovspmd: Attempt to start HP OpenView services is complete.
I definitely need some help with this please!
Thanks! -
I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support -
BOXIR3- Unable to log on : Could not connect to server - FWM 01003 null
Hi
I've just installed for the third time BOE Premium Server XIR3
Config:
Windows Server 2008
BOXIR3
CMS on MySQL
Tomcat 5.5
I've installed from scratch my server and I could not connect to any application
CCM : the SIA is up and Running, but I could not manage server to see what is launch on the server
> Error : Unable to log on : Could not connect to server SERVER_NAME:6400. Please check that the server name is correct, and that the server is running
Tomcat Configuration: Can't connect to that services too
-->Error : Unable to open the service BOE120Tomcat
CMS / Infoview : Unable to connect too.
--->Error : The server SERVER_NAME:6400 is not found (FWM 01003) null
(Here I translated the error message because I've got the message in french...)
Concerning the MySQL database, it's seems to be correctly installed as I can access the database via MySQL Admin tool.
I've seen lots of similar issue but I never found any resolution or workaround.
So If you have any ideas to help me it would be great as I must make a demo on customer site on monday morning :o(((
Many Thanks
Anne-MArieHello,
Please refer to the following KBAs, may be this can helps you:
http://service.sap.com/sap/support/notes/1884899
http://service.sap.com/sap/support/notes/1351898
And as Sneha said, make sure that the SIA and the CMS don't use the same port number.
I hope that this helps you.
Regards,
Asma -
Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1Hi there!
I try to use SVN to checkout a project, but command end with error:
svn: OPTIONS of 'http://myserver.com:8081/svn/Project/branches/somedir': could not connect to server (http://myserver.com:8081)
If you use normal port (80) it works. But this is not my SVN server.
In others computers in same LAN, command works fine. So... I think that it is some configuration in my Lion.
ping command show:
$ ping myserver.com
PING myserver.com (200.55.201.69): 56 data bytes
Request timeout for icmp_seq 0
Request timeout for icmp_seq 1
Request timeout for icmp_seq 2
Request timeout for icmp_seq 3
^C
--- myserver.com ping statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss
Need more info? Please ask.
myserver.com IP is already in my /etc/hosts
Specs:
MacBook Air 11" mid 2011
1,6GHz Intel Core i5
128GB/4GB
Fresh install to MacOS X Lion version 10.7.1 -
Ipad2 could not connect to itunes after i restore
ipad2 could not connect to itunes after i restore(newest iO7)
Help in here.
iOS: Device not recognized in iTunes for Windows
Or in here.
iOS: Device not recognized in iTunes for OS X - Apple Support
Mac OS X v10.6: iOS device not recognized in iTunes after ... -
Could not connect to server Ovi Suite 3.1.0.84
when i update my nokia e71, ovi suite asks for login id and when i put username it show could not connect to server check your internet etc.. my internet is perfectly working . i have tried all ways like GTE cerficates removal and rootupdate etc. i m fed up of these.. plzzz help me nokia experts. i m using Ovi Suite 3.1.0.84 and also used .94 version but no help. i m using Xp SP3 with 1.49 gb ram and 50 gb hardisk
Download and upgrade new version NOS3.1.0.86 and try
http://europe.nokia.com/support/download-software/nokia-ovi-suite
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You -
Firefox will not connect to internet after upgrade. The window pops up but shows "connecting " in tab. And then it sit there. Close it down and then try to reopen it and get message " Firefox already running, Exit program or shut down computer" ?????????????????
1st problem see http://kb.mozillazine.org/Firewalls
2nd problem, to close Firefox properly use File > Exit
:not with the [x] in upper right corner which close window
:see http://kb.mozillazine.org/Firefox_hangs#Hang_at_exit
:if restarting use "Restartless Restart" extension as mentioned there.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
Officejet 6700 error while searching for updates: 'Printer could not connect to server'
I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved? -
Could not connect toadministrator server
**Hi,**
**we migrated application dev to prod ....but when i add prod server ip in consol like------enterprise view -> Administrator servers->RC ->Add administrator server.**
**here i add the server ip of production...next ---> exit. and i tried to connect the prod server .......but it is showing the error like =="Could not connect the administrator server".**
**any one help me on it .**
**thanks in Adv.**try to restart your Hyperion server.
-
Administration server error: could not connect to server
I was just viewing some outlines and calc scripts. I got un error trying to close a clac script. It said unable to unlock and then closes EAS. I tried to log back in and I am getting a could not connect error. How do I fix this or do I just recycle the server
A little less drastic is to restart the EAS service. I've had an occasion or two where the service just up and stopped for no apparent reason, leaving me hanging with several hours of work to be redone in an outline... <sigh>
Anyway, restarting the EAS service may be all that you needed to do, it may have aborted or hung itself.
Edit: clearer to say service here rather than server.
Maybe you are looking for
-
Duplicate messages in search results (when using Smart Mailboxes, etc)
I've recently started using Search Folders more and more in Mail.app I've encountered this very annoying bug/feature, where duplicate messages show up in a search (inside Mail). The duplicate messages are showing up multiple times (once, for each Sma
-
Hey, I'm writing a simple client/server app and I'm trying to test it on my local machine. Every time I try to connect to the server I get a ConnectException. I'm running Ubuntu Intrepid (which I suspect may have something to do with my problem). Thi
-
Error loading transcode presets
Hello, After solving the problem error importing transcode presets. I have Mpeg 2 dvd files (.mpg), exported with Premiere CS3. Now I almost finished my project and put an video as background in a menu and now I am getting the following error: error
-
Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?
-
Hello all I have planning sequence, with several planning functions in it. i dont create data in the functions, i only check data. In each function i check different data, and if there is an error, i post error message in the end of the function. The