Attribute dimension in the planning Web form
Hi All,
Is there any option to populate attribute dimension as a drop down in the Planning web form, I see option to show attribute dimension in the Other Properties page in the web form, But attribute dimension is not showing in the drop downs. Any help will be greatly appreciated.
Thanks in advance.
KGP
I don't think there's anything specific one does to make the attribute dimension show up on the form.
When I look at the Member Selection Entity window on my form, in the upper left hand side I see a box labelled "Members in Entity".
Directly below that is another box labelled "Attributes".
Are you sure that you really have the attributes assigned?
You can check in Classic Planning, by managing dimensions, selecting Entity, and then clicking on the Custom Attributes button. You should then see the attribute dimensions/members assigned to Entity.
You can also check in EAS.
I believe the association also appears in EPMA but it's been a while since I looked at it.
Regards,
Cameron Lackpour
Similar Messages
-
Attribute Dimension members in Planning Data form
Hi All,
Can we see Attribute dimension members in Planning data form ? Pls. helpYes it is possible in 11.1.1.3, for example in your row select a dimension that has attributes associated with it. select dimension properties next to the down drop.
Tick "Enable custom attribute display (setting applies to all dimensions with associated attributes): "
Select the attribute dimension
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while opening planning web Forms
Hi ,
I am facing the below error whenever I am trying to open the planning web form.
"Target Unreachable, 'formManagement' returned null
ADF_FACES-60097:For more information, please see the server's error log for an entry beginning with: ADF_FACES-60096:Server Exception during PPR, #40"
Could you please help me on this?Have a read of the following support doc which is pretty much the same - "Hyperion Planning Error "Target Unreachable, 'getFormsForFolder' returned null -- ADF_FACES-60097" When Opening Web Forms (Doc ID 1527253.1)"
Cheers
John -
Labels before Page dimensions in Planning web form
Hi,
Is it possible to have the labels before the page dimensions in Planning web forms?
Eg: Entity <Entity dropdown in Page view> Products <Product dropdown in Page view>
I am using EPMA 11.1.1.3 version
Thanks,
Naveen SuramHi,
This sort of question was asked before, have a look at Data form customization
There is nothing available out of the box
Cheers
John
http://john-goodwin.blogspot.com/ -
Restricting the values of a dropdown in Hyperion Planning web form
Hi,
I have two dimensions(Entity and Project) represented in the page of a Hyperion Planning web form.Is it possible to constrain the values of a dropdown(Project) based on the value selected in another dropdown(Entity) in a data form in Hyperion Planning 11.1.1?
Best Regards,
MaliniThe short answer is no.
You could make separate forms per entity which could be cumbersome to manager or pershaps do something with a suppress missing form by filling in say BegBalance with a value and suppressing the intersections that were not valid.
-John -
How to lock the month in Planning web forms
Hi all ,
we r using the web forms in planning for inputting the data .
we had a problem here.
ex:
User is giving the in put for the month Dec..and again in he is changing the data..so how to lock the in web forms month wise.
thanks in AdvHi Bunny,
Do you mean to say that , once the user inputs the values for the month of Dec,after that , you dont want the user to change the values of dec which he had provided.
Is that what your montly locking means?
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/ -
How can I change the default blue colors of Planning web forms?
Hi,
how can I change the default blue colors of Planning web forms and the Logon screen colors?
thanksThat PDF file mentioned updating file HspCustomImgs_en.template in D:\Hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\HyperionPlanning\custom folder:
But for what I needed to do, here's another undocumented file to change color in right side menu: Update global.css file
in D:\Hyperion\deployments\WebLogic9\servers\HyperionPlanning\webapps\ HyperionPlanning\ui_themes\tadpole -
Member selection (Member + UDA) on Planning Web-forms
Hi all,
Is it possible to select members and UDAs together on Planning Web-forms similar to member selection on Financial Reports?
Example:
Members: ILvl0Descendants ("Total Net Income")
UDA: ALLOCACT
I didn't see this option on the member selection window, but I wanted to make sure that I am not missing anything.
Thanks,
MehmetHi,
UDA does not work in data forms. If you want that property to be there in the data form, please create an attribute dimension with the same children as UDA and attach the attribute members to that dimension.
Thanks. -
Planning Web Forms Performance
Hi,
I am working on a Planning app that has a very large "Products" dimension. It has around 26000 members in it.
I have a web form in which Market is in Page & Products in rows. I also display the attribute association Product Type for Product.
Both Product & Market are sparse dimensions.
I tried both Suppress Missing Data & Missing Blocks in the Form definition.
Suppress Missing Block is a bit quicker (as expected), but it doesn't display the attribute associations for Product.
Suppress Missing Data on the other hand displays attribute associations, but it is very very slow because of the Products dimension size.
Suppress Missing Block doesn't display attributes, is this correct? I don't see this in the documentation? Am I missing anything?
If I have to go with Suppress Missing Data, Is there a way to increase planning web form performance by adding cache or any tweaking similar to Essbase Reporting?
Appreciate your thought.
Thanks,
Ethan.
Edited by: Ethan on Jul 10, 2012 12:10 PMCameron & David,
Yes. This is a very strange req. The Product line (26K) are all Level-0 members & there is no fixed Product to Market mapping. Any combination is possible.
Each market will have only few Products presence. I can say around 100 is the max I have seen, but the requirement is any product can come in any market.
I load the cube with actuals from a different source system & users update the forecast data/ drivers to calculate the data.
So the web form itself is not huge. It is just the potential number of possible combinations that is slowing down the web form.
I am still in the initial stages of Development. I am sure I'll have tough time in Calcs, Aggs & Reports by Product.
Appreciate your thoughts.
Thanks,
Ethan. -
I've tried several things, but can't get a percentage to show up on my planning web form. I've tagged the member as a percentage, which based on documentation says it will then show as a percentage on the web form.
Any ideas would be appreciated?
Thanks!Hi,
First make sure the member has a data type of percentage (which you have done).
Then you will need to set the evaluation order - Administration > Dimensions > Evaluation Order then select the dimension and move it to the right move window. Save.
You should then be able to enter in percentage on the data form.
Cheers
John
http://john-goodwin.blogspot.com/ -
Scaling to millions in Planning web forms
How do I scale a Planning web form to show in millions? We are using Planning 11.1.2 and using custom currency dimension.
Hi,
Rahul & John Thank you very much for the help provided.The Web forms have been developed in version 9.3.1 so creating dynamic members will not be possible.I will create a member in the cube itself to meet the requirements.
Regards,
Proteem. -
Planning web forms are not opening in EPM11..
Hi Gurus,
Planning web forms are not opening in EPM11..
What logs i need to check in these case, what should be the path of the logs.
Here i am accesing web forms on my local system through workspace web link
We have 2 essbase server and three application server..
PLease suggest...In Windows the apth that u have maentioned there are two log files :
HyS9RaFrameworkAgentErr and HyS9RaFrameworkAgentOut
In application unix servr i tried at the following path :
/xxxxxx/xxxxxx/hyperion/Oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/planning :
there are following files there :
calcmgrdeploy.log calcmgrexecution.log calcmgrlaunch.log -
Need a process to update BSO Planning Web form into an ASO Cube
Need a process to update information from the BSO Planning Web form into an ASO Report Cube every (5) five minutes.
Please adviseThanks here is Part 2 of my questions
Details:
User Input data into a web form for Intersection are the following:
Dim1,Dim2,Dim3,Dim4 , Account AAAA, 1000
Dim1,Dim2,Dim3,Dim4 , Account BBBB, 2000
Dim1,Dim2,Dim3,Dim4 , Account TTTT, 4000
Dim1,Dim2,Dim3,Dim4 , Account ZZZZ, 7000
Design Question:
In the ASO Reporting Cube
AAAA and BBBB are both at level 0 in both cube
TTTT and ZZZZ are being loaded to a parent which is Level 1
MY Issue with the Design Question ???
ASO Cubes can only be load at a level 0.
So how can I complete this task, what are my option:
My thinking process is the XRef Calc Script could push data the cube, than by built a maxl scripts that would run the Calc script and put this scripts into some kind of system scheduler running the Maxl Scripts Every (5) Mintues
or am i way off base here ????
Please advise
Thanks in Advance -
Hiearchy in Planning Web Form Collapes after user Submits in SmartView
We currently have Hyperion Planning 11.1.1.3.0 & SmartView 11.1.1.3.00
I have a end user who opens a Planning Web Form via SmartView. When form is opened the Hiearchy in the rows are fully expanded.
When the user hits "Submit Data" the hiearchy collapes to the top Parent level.
I have confirmed that the Planning Webform does NOT have suppress hiearchy selected.
Is there some setting in SmartView or Planning that I am missing that would account for this?
I would appreciate it if anyone had any suggestions.Hi,
I faced some issue similar to this in past with version 9.2, As iam updating security on planning and it works fine for data forms when i perform security refresh.
but when user access those from excel the filters doesn't get update on EAS filters. after two hours investigation even though i update some filters on planning
side after security refresh it doesn't get affected on essbase filters. the reason when security refresh is done the filters getting in to cache memory and doing nothing on essbase, so work around is to delete one particular filter on essbase and then perform security refresh so that it gets updated.
Let me know if this is helpful and works.
Thanks,
Red -
Planning Web Form Differences with SmartView Form
We have a planning form that "hides" (hide the segment on the data form option enabled) a couple of columns. This works fine when we open the planning form via the planning web application. However, if we open the same form via Excel/SmartView the form shows the columns that should be hidden. Has anyone come accross this issue? We are on Hyperion Planning/Essbase v11.1.1.3.
Hi,
Planning web and smartview front ends have not walked at the same pace so far. You are facing one of the many variations between web and smartview. Another critical difference is the lack of composite forms in smartview which made us decide to rule out the usage of smartview in number of cases. However, luckily this is bound to change in 11.1.2 release as I see from the way things are happenning.
Cheers,
Alp
Maybe you are looking for
-
Need help opening a file in a new window
I'm creating an interactive PDF in InDesign CS5.5. This PDF contains buttons I've made that link to other, separate, PDF files using the open file method. This is all working fine - trouble is, when I click the button to open the second PDF file, the
-
My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!
-
Authorization object M_MATE_STA problem at MM17.
Hi, experts! I have a problem of Mass change (T-code:MM17) authorization. I want to control our user that only can change data through MM17 and not allow to create new data to prevent accident. So, I set an authorization obj. M_MATE_STA(Material Mast
-
DVD-RW formating problem ?
Hi ALL, funny problem i have, a friend of mine gave me a CD full of Wedding photos, he asked me to put them onto a brand-new DVD-RW+ disc, easy job i thought. I copied all the photos to a folder on my Hard Drive, inserted a blank DVD-RW+, selected al
-
Oracle LOCATOR - Standard Edition
Hello, Can you please to tell me if there is any customer using Oracle Locator with Standard Edition? Regards, Andre