Attribute error

Hi ,
Please can anyone will help its an urgent and critical issue in production..
we have object x in the infoprovider but in SAP EP it says the object does not exists in the infoprovider ... and when i clicked on the error it says delete the object from the query but we have hold that object kindly anyone can help he its an urgent issue how to resolve it

Hello Anjali,
What is the Object and is it a Multiprovider/InfoCube/DSO?
Make sure the object exists in the InfoProvider and is not in Inactive version.
You can also goto RSRV check the Invalid Object Version of the Characteristic Value If any object is Inactive in the InfoProvider then activate it.
Thanks
Chandran

Similar Messages

  • When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported.  Is this a bug in Mavericks?

    When I check my boot SSD drive using Disk Utility under Mavericks, I often get "Incorrect number of extended attributes" errors.  But if I boot off an external drive and check the same SSD, no errors are reported. 
    This happens not just with the SSD in my Mac Mini, but with another SSD in my MacBook (both now running Mavericks).  So far as I know, all of the kit I am using is in good order (despite the file corruption reports).  So I am beginning to wonder if it could be due to a bug in Mavericks?  Both SSD drives have been formatted to MacOS Extended (journaled) format.  Should I have used a different format, I wonder?
    Has anyone else encountered this issue?
    Does anyone have a solution?
    Or an explanation that might help my investigation of the issue?
    Thanks guys,

    I understand that the Corsair Force 3 is not one of the SSD drives that are supported on Apple Macs. 
    I did try downloading and using Trim Enabler, but the error message came up both when it was off and when it was on.
    I understand that not everyone thinks Trim Enabler is a good program, though there is a new version out now, so I may give it another try.

  • Field Attribute Error

    Hi All,
    i am working on a upgrade project from 46c to ECC 6.
    we are facing field attribute error "No write access to reference CONTROL takes place".
    the error is been pointed in data declaration ' DATA: CONTROL  TYPE REF TO I_OI_OLE_CONTAINER_CONTROL."
    can anyone suggest solution for this?

    Hi,
    I am using table element, I would like to explain my problem with an example.
    now suppose there are 5 rows and 3 columns in my table element with all the fields mandatory, and at runtime i fill up the table columns while keeping any fields empty. Now my requirement is to highlight those perticular cells which are empty.
    I have written my validation code in one of the component controller method.
    Pls suggest.
    I am pasting teh code snippet.
    * get all declared attributes
      node_t_bknvi->get_static_attributes_table(
        IMPORTING
          table = tabl_t_bknvi ).
      LOOP AT tabl_t_bknvi INTO stru_t_bknvi.
        IF stru_t_bknvi-taxkd IS INITIAL.
    *     report message
          CALL METHOD l_message_manager->report_attribute_error_message
            EXPORTING
              message_text   = 'Input Required Fields'
              element        = elem_t_bknvi
              attribute_name = 'TAXKD'
    *        PARAMS         =
    *        MSG_USER_DATA  =
        ENDIF.
      ENDLOOP.

  • User Attribute Error

    Dear All,
    A user was facing attiribute error while trying to approve shopping cart.
    The user had approved shopping carts earlier, but this problem has cropped in suddenly.
    I checked user consistency and repaired the user, all things seems to be fine.
    So I triggered org replication for that particular user position and then the problem got resolved,
    But however the user was not able to approve the shopping cart which was created prior to the user correction.
    the same attribute error happens again.
    Pls let me know how do i correct this.
    Regards
    harish

    Hi,
    Check If this happening with newly created SCs as well with same user after correction? If not then you might have to restart the WF of that particluar SC and retry with approval.
    Regards
    ~ Vipin

  • AD Recon Unknown Attribute error

    I am seeing an unknown attribute error when doing an AD Target recon.
    oracle.iam.reconciliation.exception.ReconciliationException: Exception occurred while inserting data into table RA_ADUSER7 due to RA_ADUSER7 : [null]
    Caused By: oracle.iam.platform.entitymgr.UnknownAttributeException: RA_ADUSER7 : [null]
    Please suggest.
    M

    Yes we created the recon profile. But it is still showing the errors. Here is the complete stack trace.
    <Apr 17, 2012 12:04:18 PM CDT> <Error> <oracle.iam.reconciliation.impl> <IAM-5010000> <Generic Error/Information: {0}
    oracle.iam.reconciliation.exception.ReconciliationException: Exception occurred while inserting data into table RA_ADUSER7 due to RA_ADUSER7 : [null]
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.reconEvent(ReconOperationsServiceImpl.java:285)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:189)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:212)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:201)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:197)
         at Thor.API.Operations.tcReconciliationOperationsIntfEJB.createReconciliationEventx(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor3621.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy521.createReconciliationEventx(Unknown Source)
         at Thor.API.Operations.tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.createReconciliationEventx(tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.java:709)
         at sun.reflect.GeneratedMethodAccessor3629.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
         at $Proxy167.createReconciliationEventx(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor3620.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
         at $Proxy513.createReconciliationEventx(Unknown Source)
         at Thor.API.Operations.tcReconciliationOperationsIntfDelegate.createReconciliationEvent(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processUserChange(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processBatch(Unknown Source)
         at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute(Unknown Source)
         at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:384)
         at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:144)
         at sun.reflect.GeneratedMethodAccessor1927.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
    Caused By: oracle.iam.platform.entitymgr.UnknownAttributeException: RA_ADUSER7 : [null]
         at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:256)
         at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.createEntity(EntityManagerImpl.java:239)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.reconEvent(ReconOperationsServiceImpl.java:278)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:189)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:212)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:201)
         at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.createReconciliationEvent(ReconOperationsServiceImpl.java:197)
         at Thor.API.Operations.tcReconciliationOperationsIntfEJB.createReconciliationEventx(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor3621.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
         at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
         at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
         at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
         at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
         at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy521.createReconciliationEventx(Unknown Source)
         at Thor.API.Operations.tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.createReconciliationEventx(tcReconciliationOperationsIntfEJB_troehf_tcReconciliationOperationsIntfRemoteImpl.java:709)
         at sun.reflect.GeneratedMethodAccessor3629.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:84)
         at $Proxy167.createReconciliationEventx(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor3620.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
         at $Proxy513.createReconciliationEventx(Unknown Source)
         at Thor.API.Operations.tcReconciliationOperationsIntfDelegate.createReconciliationEvent(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processUserChange(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processBatch(Unknown Source)
         at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation(Unknown Source)
         at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute(Unknown Source)
         at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.execute(SchedulerBaseTask.java:384)
         at oracle.iam.scheduler.vo.TaskSupport.executeJob(TaskSupport.java:144)
         at sun.reflect.GeneratedMethodAccessor1927.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.iam.scheduler.impl.quartz.QuartzJob.execute(QuartzJob.java:196)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
    >
    <Apr 17, 2012 12:04:18 PM CDT> <Error> <OIMCP.ADCS> <BEA-000000> <====================================================>
    <Apr 17, 2012 12:04:18 PM CDT> <Error> <OIMCP.ADCS> <BEA-000000> <com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask : processUserChange : Exception occurred while inserting data into table RA_ADUSER7 due to RA_ADUSER7 : [null] >
    <Apr 17, 2012 12:04:18 PM CDT> <Error> <OIMCP.ADCS> <BEA-000000> <====================================================
    >

  • Empty "KEY" attribute Error

    We have upgraded to BI Platform 4.1 Support Pack 3. We are seeing the following error when opening reports containing drill filters.
    Empty "KEY" attribute (Error: INF)
    Can anyone help with the solution?
    We get the following error message when we try to modify the report, which has error, in applet mode.
    com.businessobjects.rebean.internal.xml.XmlValidationException: Empty
    "KEY" attribute.
                      at
    com.businessobjects.rebean.wi.impl.xml.parser.DrillInfosParser.parseDrillObject(DrillInfosParser.java:148)
                      at
    com.businessobjects.rebean.wi.impl.xml.parser.DrillInfosParser.parseDrillHiers(DrillInfosParser.java:111)
                     at
    com.businessobjects.rebean.wi.impl.xml.parser.DrillInfosParser.parse(DrillInfosParser.java:54)
                      at
    com.businessobjects.rebean.wi.impl.services.ReportEngineDrillServiceImpl.getDrillDataFromServerCaller(ReportEngineDrillServiceImpl.java:780)
                      at
    com.businessobjects.rebean.wi.impl.services.ReportEngineDrillServiceImpl.getInternalDrillHierarchies(ReportEngineDrillServiceImpl.java:639)
                      at com.businessobjects.rebean.wi.impl.services.ReportEngineDrillServiceImpl.getDrillHierarchies(ReportEngineDrillServiceImpl.java:613)
                      at
    com.businessobjects.rebean.wi.impl.services.ReportEngineDrillServiceImpl.searchDrillFilterRSFromGetDrillInfo(ReportEngineDrillServiceImpl.java:246)
                      at
    com.businessobjects.rebean.wi.impl.services.ReportEngineDrillServiceImpl.getDrillFilters(ReportEngineDrillServiceImpl.java:199)
                      at
    com.sap.webi.ui.drill.DrillBar.BuildDrillBar(DrillBar.java:432)
                      at
    com.sap.webi.ui.drill.DrillBar.UpdateComponents(DrillBar.java:617)
                      at
    com.sap.webi.ui.drill.DrillBar.updateAll(DrillBar.java:341)
                     at
    com.sap.webi.ui.drill.DrillBar.eventBusProcessNewMessage(DrillBar.java:305)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.dispatchEvent(EventBus.java:324)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.sendMessage(EventBus.java:61)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.sendDefaultMessage(EventBus.java:87)
                      at
    com.sap.webi.ui.tasks.NavigOnDocumentTask.doneProcess(NavigOnDocumentTask.java:142)
                      at com.sap.webi.toolkit.ui.tasks.WebITask$PrivateWorker.done(WebITask.java:378)
                      at
    javax.swing.SwingWorker$5.run(Unknown Source)
                      at
    javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
                      at
    sun.swing.AccumulativeRunnable.run(Unknown Source)
                      at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown
    Source)
                      at
    javax.swing.Timer.fireActionPerformed(Unknown Source)
                      at
    javax.swing.Timer$DoPostEvent.run(Unknown Source)
                      at
    java.awt.event.InvocationEvent.dispatch(Unknown Source)
                      at
    java.awt.EventQueue.dispatchEventImpl(Unknown Source)
                      at
    java.awt.EventQueue.access$000(Unknown Source)
                      at
    java.awt.EventQueue$1.run(Unknown Source)
                      at
    java.awt.EventQueue$1.run(Unknown Source)
                      at
    java.security.AccessController.doPrivileged(Native Method)
                      at
    java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
                      at
    java.awt.EventQueue.dispatchEvent(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
                      at
    java.awt.Dialog$1.run(Unknown Source)
                      at
    java.awt.Dialog$3.run(Unknown Source)
                      at
    java.security.AccessController.doPrivileged(Native Method)
                      at java.awt.Dialog.show(Unknown
    Source)
                      at
    com.jidesoft.dialog.StandardDialog.show(Unknown Source)
                      at
    java.awt.Component.show(Unknown Source)
                      at
    java.awt.Component.setVisible(Unknown Source)
                      at
    java.awt.Window.setVisible(Unknown Source)
                      at
    java.awt.Dialog.setVisible(Unknown Source)
                      at
    com.sap.webi.toolkit.ui.dialog.MessageDialog.setVisible(MessageDialog.java:186)
                      at
    com.sap.webi.ui.SwingClientHelper.showError(SwingClientHelper.java:347)
                      at
    com.sap.webi.ui.SwingClientHelper.showError(SwingClientHelper.java:198)
                      at
    com.sap.webi.ui.SwingClientHelper.showError(SwingClientHelper.java:205)
                      at
    com.sap.webi.ui.SwingClientHelper.showError(SwingClientHelper.java:188)
                      at
    com.sap.webi.ui.drill.DrillBar.BuildDrillBar(DrillBar.java:435)
                      at
    com.sap.webi.ui.drill.DrillBar.UpdateComponents(DrillBar.java:617)
                      at
    com.sap.webi.ui.drill.DrillBar.updateAll(DrillBar.java:341)
                      at
    com.sap.webi.ui.drill.DrillBar.eventBusProcessNewMessage(DrillBar.java:321)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.dispatchEvent(EventBus.java:324)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.sendMessage(EventBus.java:61)
                      at
    com.sap.webi.toolkit.ui.eventbus.EventBus.sendDefaultMessage(EventBus.java:87)
                      at
    com.sap.webi.toolkit.ui.eventbus.ContextEventBus.sendDefaultMessageOnEventBus(ContextEventBus.java:23)
                      at
    com.sap.webi.ui.tasks.workflows.RefreshWorkspaceWorkflow.onFinish(RefreshWorkspaceWorkflow.java:131)
                      at
    com.sap.webi.toolkit.ui.tasks.TaskWorkflow.startNextTask(TaskWorkflow.java:71)
                      at
    com.sap.webi.toolkit.ui.tasks.TaskWorkflow.propertyChange(TaskWorkflow.java:90)
                      at
    java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
                      at
    com.sap.webi.toolkit.ui.tasks.WebITask.firePropertyChange(WebITask.java:66)
                      at
    com.sap.webi.toolkit.ui.tasks.WebITaskManager$TaskPCL.propertyChange(WebITaskManager.java:275)
                      at
    java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
                      at
    javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport.firePropertyChange(Unknown
    Source)
                      at
    javax.swing.SwingWorker$SwingWorkerPropertyChangeSupport$1.run(Unknown Source)
                      at
    javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(Unknown Source)
                     at
    sun.swing.AccumulativeRunnable.run(Unknown Source)
                      at javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(Unknown
    Source)
                      at
    javax.swing.Timer.fireActionPerformed(Unknown Source)
                      at
    javax.swing.Timer$DoPostEvent.run(Unknown Source)
                      at
    java.awt.event.InvocationEvent.dispatch(Unknown Source)
                      at java.awt.EventQueue.dispatchEventImpl(Unknown
    Source)
                      at
    java.awt.EventQueue.access$000(Unknown Source)
                      at
    java.awt.EventQueue$1.run(Unknown Source)
                      at
    java.awt.EventQueue$1.run(Unknown Source)
                      at
    java.security.AccessController.doPrivileged(Native Method)
                      at
    java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
                      at
    java.awt.EventQueue.dispatchEvent(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEvents(Unknown Source)
                      at
    java.awt.EventDispatchThread.pumpEvents(Unknown Source)
                      at
    java.awt.EventDispatchThread.run(Unknown Source)

    I had the same problem. I saved my batch and it gave me that same error: "You must enter a name for this batch submission. This is the name that identifies this submission in the Batch Monitor and the History window."
    What I did was to create a second batch (another tab in the batch window) I left this one "untitled" (did not save it) then submitted it -and it worked. I named the job and it is happily chewing away.
    Not pretty, but it worked.

  • How to resolve attribute errors

    Hi,
    When I am trying to click on an lov item I am getting the following error
    Attribute TransactionTypeId in CreateArInvoiceAM.CljReceivableSlipsEOVO1 is required
    I would get the TransactionTypeId only when I select an item from the lov but before selecting the lov itself I am getting this error.Can anyone tell me how to resolve this error.
    Thanks for your help in advance.

    Do you have any open method invocation in the processFromRequest? Just start the debugger and see how is the code progressing. Seems some method is getting invoked unintentionally.

  • Lock NOT set for: Loading master data attributes error

    Hi experts,
    We were encountering this error before when trying to load master data.  When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again.  We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE.  I have read that it is possible this lock error happens when two change runs happen at the same time.
    My question are:
    1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
    2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
    mark
    Message was edited by:
            Mark Siongco
    Message was edited by:
            Mark Siongco

    Hello Catherine
    I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
    The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
    Fix#2: by a faster server (by faster, I mean more CPU power)
    Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
    Good luck!
    Ioan

  • Attribute error while creating shopping cart in portal

    Hi,
    We are using SRM 7.0 . While creating shopping cart in portal , I am getting error " the attribute of the user are inconsistent or not defined. See transaction ppoma_bbp "
    I have maintained attributes of ACS,BSA,BUK,BWA,CUR,KNT,WGR & WRK . Done attribute check in BBP_ATTR_CHECK, it issued warning message for CAT attribute. All other attributes are Ok.
    Could anybody help to resolve this.
    Regards
    Ayyappan

    HI
    Step 1: Check the consistency of the User for Shopping Cart using Transaction BBP_CHECK_CONSISTENCY. THis will give you a snapshot of what is missing in user's attributes for creating a SC.
    Step 2. Go to PPOMA_BBP and note down the Position id and CP id of the user. Then check the consistency of these objects using BBP_BP_OM_INTEGRATE.
    It seems the combination of attributes is not in right place for this user
    Regards
    Virender Singh

  • FRM-41011: Undentified Attribute error in forms 6i

    Using this code:
    Set_Item_Instance_Property('payments.payment_due',To_Number(:SYSTEM.CURSOR_RECORD),VISUAL_ATTRIBUTE,'red');
    I am trying to set a field to RED text. If it meets a specific condition.
    But for some reason, I keep getting that above error.
    Thanks in advance

    Do you actually have a visual attribute named 'red' in your form? I suppose not. If so, you should first define the visual_attribute named 'red' in order to use it. RTM for visual attributes!
    Best of luck!

  • BP User Defined Attributes -- Error

    Hi experts!!
    The customer i am working on needed some extra fields on the Accounts screen page, so i defined all User Defiened Attributes from 1 to 10 and added them from the Node MARKETING of the component BP_HEAD.
    When i try to save the Account (after filling one of the attributes) I get the following error msg: Classification data is already maintained for business partner.
    The Account can be saved and replicated to the ERP if the attributes remain empty.
    What am i missing here???
    Is there a connection between the attributes and account classification ??
    Thank you in advance

    The error was fixed with Note 1271004.
    BUT .. now when i Save the Account with User Defined Attributes filled the replication to ERP does not happen..
    If the attributes are empty it gets replicated.
    Any ideas???
    Please help!!

  • Bex Query's(Composite Provider) Navigational Attribute Error

    Hi All,
    We have created a BEx query on top of a Composite Provider. In the Composite Provider, we have a few common Navigation Attributes in all Info Providers.
    Whenever we tried to show a particular Navigational Attribute (G_TIC9030) in BEx query (RSRT), we will receive the error messages as below.
    This problem doesn't occur if we created another test query on each Info Providers of Composite provider. All test queries are able to return result and are showing all the navigational attributes without any errors.
    Any idea on how to fix this?
    Regards,
    Kang

    As discussed Kang this looks like the problem described in OSS Note 2019244.
    It's not unusual to find a few of these problems in testing.

  • Report Attribute Error Message

    Hello Everyone,
    I am trying to use the method report_attribute_error_message of if_wd_message_manager interface to display an error message if the user does not fill all the mandatory fields. My scenario is as follows:-
    I have one node po_items with all the attributes (10 attributes) that I require. Among these 10 attributes I have 7 attributes as table Cell editors and 3 attributes as normal inputfields. So, when I am trying to check for madatory fields using the following code everything is fine a part from the link to the fields when someone doesn't enter any mandatory fields.
    LOOP AT lt_items_elementset INTO le_items_element.
        IF ls_items_1-doc_date IS INITIAL.
          CALL METHOD lo_message_manager->report_attribute_error_message
          EXPORTING
              message_text = 'Please fill the Document Date'
              element      = le_items_element
              attribute_name = 'doc_date'.
        ENDIF.
        IF ls_items_1-doc_type IS INITIAL.
          CALL METHOD lo_message_manager->report_attribute_error_message
            EXPORTING
              message_text = 'Please fill the Document Type'
              element      = le_items_element
              attribute_name = 'doc_type'.     
        ENDIF.
        IF ls_items_1-co_code IS INITIAL.
          CALL METHOD lo_message_manager->report_attribute_error_message
            EXPORTING
              message_text = 'Please fill the Company Code'
              element      = le_items_element
              attribute_name = 'co_code'.     
        ENDIF.
        IF ls_items_1-cost_ctr IS INITIAL.
          CALL METHOD lo_message_manager->report_attribute_error_message
            EXPORTING
              message_text = 'Please fill the Cost Center'
              element      = le_items_element
              attribute_name = 'cost_ctr'.
        ENDIF.
        IF ls_items_1-plant IS INITIAL.
          CALL METHOD lo_message_manager->report_attribute_error_message
            EXPORTING
              message_text = 'Please fill the Plant Number'
              element      = le_items_element
              attribute_name = 'plant'.
        ENDIF.
    ENDLOOP.
    So when we click on the error message it takes you to the exact field where the error has occured. This is happening only for the fields in the table and it is not happening for the inputfields that are not in the table.
    Can you explain of how to acheive this? I would greatly appreciate your help.
    Regards,
    Gopal.

    Hi,
    If those Input fields are not part of table...then you can use the standard one.
    For me Start date(BEGDA) is mandatory.
    wd_comp_controller->gref_element->get_attribute(
            EXPORTING
              name =  wd_assist->GC_BEGDA            "BEGDA
            IMPORTING
              value = lv_begda ).
      endif.                                 "IF wd_comp_controller->gref_element is not initial.
    *** Reference for view controller
      wd_comp_controller->GREF_V_CONTROLLER = wd_this->wd_get_api( ).
    ***Check wether the mandatory feilds are being filled or not
      if lv_begda is initial.
        if wd_comp_controller->GREF_V_CONTROLLER is not initial.
          CALL METHOD cl_wd_dynamic_tool=>check_mandatory_attr_on_view
            EXPORTING
              view_controller  = wd_comp_controller->GREF_V_CONTROLLER
              display_messages = abap_true
            IMPORTING
              messages         = lt_messages.
        endif.                               "IF wd_comp_controller->GREF_V_CONTROLLER is not initial.
      endif.                                 "IF lv_begda is initial.
    Regards,
    Lekha.

  • Forms Personalization: FRM-41017- Cannot set UPDATE ALLOWED attribute error

    Hey All,
    I have a requirement in Projects > Allocation > Allocation Rules which needs a few mandatory columns to be greyed out.
    I think that the form is not getting query-able because of the “FRM-41017- Cannot set UPDATE ALLOWED attribute of non-enabled item RULE.OFFSET_METHOD” error when we open the form.
    I was trying to set the required property to false for personalization’s done on mandatory columns and see if that can work in suppressing that error. But it did not.
    Can anyone help me by telling how to avoid this and make the form query-able?
    Any help is much appreciated.
    Thanks !

    Please post the details of the application release, database version and OS.
    Please see if (Capital Projects Form Personalizations Error- FRM-41017 [ID 1072660.1]) helps.
    Thanks,
    Hussein

  • "Failed to load Main-Class manifest attribute" error message !

    Hello
    I am trying to download a library to use with my applets.
    (objectdraw.jar)
    After I download it, I try to open it ( double click on it) and it says
    "Failed to load Main-Class manifest attribute from
    C:\2_jbproject\objectdraw.jar
    I need to open it in order to use it with my applets .
    What do I need to do ?
    Thank you in advance

    cannot find symbol constructor
    Sun(objectdraw.DrawingCanvas)Isn't Sun your class? If so (unless BlueJs error messages are confusing) it sounds like your Sun class does not have a constructor with the signature you are using.
    I'm not familiar with BlueJ, but hopefully it ignores the classpath environment variable (though your error message lead me to belive otherwise). Regardless, this is a bad way to use classpath as it can lead to confusing problems down the road.
    The objectdraw library is there but maybe I have to open or extract itfor it to be seen. But how ?
    No you don't have to extract it, thats the whole point behind a jar. What you do have to do is ensure it is on the classpath for both compilation and execution. For compilation, read the help/documentation for BlueJ. For applet deployment, refer to the java tutorial section on applets and pay close attention to the applet tag description, especially the comma delimited archive attribute.
    Good luck

  • Python2.7: Attribute Error in xml.sax.saxutils.XMLGenerator

    Hi there,
    after switching from Ubuntu to Arch Linux I noticed a disturbing problem
    in a Python script I wrote (see
    http://sourceforge.net/projects/emcdutilityprog/files/).
    Using Windows (Python 2.6) and Ubuntu 11.04 (Python 2.7) I did not
    experience any problems.
    Using Arch Linux (Python 2.7) I got the following errors:
    Traceback (most recent call last):
      File "/usr/local/bin/emcd", line 1663, in settings_dialog
        self.settings.dialog(self.window)
      File "/usr/local/bin/emcd", line 1502, in dialog
        self.save()
      File "/usr/local/bin/emcd", line 1445, in save
        self.prepare_writing()
      File "/usr/local/bin/emcd", line 1414, in prepare_writing
    self.xmltree.startElementNS((None,u'EELS-GUI-Settings'),u'EELS-GUI-Settings',attrs,True)
      File "/usr/local/bin/emcd", line 1352, in startElementNS
        self._write('\t'*self.counter)
    AttributeError: Generator instance has no attribute '_write'
    I'm using the '_write' method in an instance Generator, which has
    xml.sax.saxutils.XMLGenerator as parent. I'm using it to make the
    resulting xml file more readable for humans.
    Have you encountered a similar problem? Maybe you could suggest me some
    possible solutions to my little problem?
    Thanks a lot
    Andi

    Poking deeper, I got a reproduceable segfault in my script, which appears to be limited to Arch Linux, too. Has anybody made a similar experience?
    The problem appears to be in line 1172 of the script, where a method is connected to a GTK event. As far as I can tell, the problem is not in the callback method edit_meta as this method does not even get started.
    Any ideas?

Maybe you are looking for