Audigy 2 + 7.1 Probl

Hey, Just got a new custom PC, and put my audigy 2 into it aswell, plugged it in, set all the software up, but, when i go to test speakers, where she goes (front left, front right, etc etc) the goes threw, and when its up to the side ones, no sound comes out. Ive tried the onboard aswell (it supports 7.) same thing, tried swapping speakers, they work, but middle still dont, so the plugs that go into the soundcard it self (and i havnt touched ANY thing behind the sub since i set it up, and it used to work fine) and changed the plugs around, when i did that, side ones would, but it would cancel out another set, i've used the origonal drivers that came with it, the latest creative ones off thier site, and the YouP HAX New Year hacked ones (which i used to use) and none of them work. Ive also set every setting posible in creative and the windows sound panel to 7., i've made sure nothing is muted aswell. And yeah, its not that i was using a program that didnt support 7., i used the THX speaker setting thing, and the normal speaker setting thing that came with creative. Oh, one last thing, the speakers i have r the gigaworks s750. Thanks for reading threw the long post... if u got this far :P
TaZ

sorry, i should add its an Audigy 2 ZS Platnum Pro, one with the External Hub.

Similar Messages

Vista 64 - Audigy 4 Microphone probl

Hello eveyrone
I have make some search here but don't found an answer for my problem. Perhaps there is no real answer...
So my problem is my microphone make weird noise when I recorded my self with the recorded tool of Vista.
My specs are :
Vista 64
4 GB
SB Audigy 4 Pro.
I deactivate my onboard audio card in the BIOS.
I deactivate all other inputs than my mic line/microphone.
I change with the two last drivers for Vista 64.
Nothing...
I precise, no problem with my Windows XP or Ubuntu partitions.
Any help possible?
Thanks to all.

I have well had an audigy 2zs, i experienced the same problem...i finally gave up sold the card and i've been using my onboard soundcard since then, no more problems?:smileyvery-happy:
Message Edited by sebas on 07-25-2008 08:47 AM

SB Audigy 4 Driver Probl

At least, I *think* it's a driver problem. Let me start from the beginning.
Just about every other time I start up my PC, my SB Audigy 4 (Retail) runs into a problem. That is, the nice Exclamation Point shows up, and it doesn't see it as a SB Audigy 4, but rather a "Multimedia Audio Controller" (MAC for short). So I uninstall the MAC, reboot (note, at reboot, it shows it as a Creative Soundblaster Audigy Audio Processor, still with the yellow exclamation point next to it, and still with (CODE 0) attached, and install the SBAX_WEBUP_LB_2_08_0004.exe drivers. (Why, oh why does it only come in EXE format? What happened to the Good old days of .inf files?)
Pic Follows:
http://www.sglider.net/images/Audigy4uninstalled.JPG
I install, and everything goes well. I reboot, and my Sound drivers are there, so I can play my favorite games. But, the next time I reboot my PC, I'll have lost my Sound Drivers again --- though it doesn't happen every time, but I can't go more than 2 reboots without it happening again.
I'm really getting tired of reinstalling these drivers on every boot up. Does anyone have the skinny?
My system details follow:
AMD Athlon XP 3000+ (333mhz Barton)
Soyo KT400 Dragon Ultra Mobo (Via chipset - Newest Hyperion Drivers installed) - Motherboard updated.
Ati Radeon X850XT AGP
SB Audigy 4
2 GIG PC2700 DDR SDRAM
Microsoft Windows XP Professional w/SP2 and all updates.
Thank you for your patience, and your assistance.

Thanks for that tip, that may make it so I don't have to do stupid things to get it to see the driver.
Next step though is to find a way to keep the Driver from mysteriously uninstalling or borking itself so I don't have to keep reinstalling it. Any ideas?

Creative Audigy 4 Pro probl

<SPAN>I have the speaker system Sven HT-485 and sound card Creative Audigy 4 Pro. As to me correctly to connect all this through the external module of the sound card that worked normally. And I connect that, but through a coaxial and optical there is no sound. And when I connect to the most sound card through AUX a sound is, but a stereo. And how to me to achieve 5. Or it is impossible? Help, very much I ask! Thanks

tim55555 wrote:
<SPAN>I have the speaker system Sven HT-485 and sound card Creative Audigy 4 Pro. As to me correctly to connect all this through the external module of the sound card that worked normally. And I connect that, but through a coaxial and optical there is no sound. And when I connect to the most sound card through AUX a sound is, but a stereo. And how to me to achieve 5. Or it is impossible? Help, very much I ask! Thanks
Speaker configurations are made on Speaker Settings -panel (can be runned from Surround Mixer too).
Perhaps on Speaker Settings -> digital output only may help when you connect through digital output. There is also utility called CTPanel you may want to check out.
.jtp

Audigy 4 decoding probl

Hello all!
I just became the owner of an audigy 4 pro and everything seems to be working fine except for the hardware ac3 and dts decoding.
Both windows media player 0 and powerdvd 5 behave as if the dvd is scratched (glitchy playback) when i turn on the spdif output.
I tried to play a vob file from the hard dri've to make sure it doesn't have anything to do with data transferring and i got the same problem.
There's no conflict with my graphics card drivers (radeon 9600pro) and the on-screen dolby/dts logo appearing when i start playback, because i turned the osd off and the problem persists...
Powerdvd's soft decoding works fine but i'd rather have it the hardware way... after all i paid for it.
Strange thing -dvd audio works flawlessly.
I previously had the li've 5. installed, could there be any conflict with the old drivers?
Driver problem or faulty card?
Thanks for any help!
Ledz
System: athlon xp 2600+, 768 ddr333, asus a7n8x deluxe mobo, ati radeon 9600pro agp8, audigy 4pro
sony 6x dvdrom...

Well I have to say thank you for saving me $300.00 bucks. I have the Audigy 2ZS Platinum and it does exactly the same thing. When the "scratching" finally goes away, the audio and video are out of sync and I cannot seem to fix it. It appears that this is something of an emerging problem as I have seen more and more people complain about it in the last couple of months. I have yet to find the answer to fix it and Creative has not responded here concerning the issue, at least that I have seen. I am using the nVIDIA DVD Decoder with a GeForce 6800GT OC and I get the same response with both Dolby Digital and DTS. I have seen various postings of people trying many different options such as changing PCI slots and manually setting IRQ's but this has not remedied the situation. I am wondering if it is driver or hardware related. Does anyone at Creative know anything about these problems?

Audigy 4 pro probl

Hi,
I am having problems getting dts sound from my audigy 4 pro soundcard.
i am using inspire t7900 speakers.
when i play a movie in powerdvd i only get 2 front channel working, even though i select dts format.
what am i doing wrong?
i get the same effect when a play a movie on my dvd player [home]. i am using the left and right audio leads commected toline in 3 on the back of the audigy external box, but still only get two channels.
Please help, what am i doing wrong?

Do you have the 2 pin Digital cable running from the DVDrom dri've to you card or to/from the I/O port?
Use it if you dont.
Go to windows control panel then audio HQ.
Open up device controls and then decoder.
Select SPDIF passthrough. ( ensure you speaker set up can decode it though ) Id say yours do
In control panel open up sound and audio devices then hardware. Select your sound card in the list.
Highlight and go properties then go to properties in the next window.
Open up each device and ensure its set to use audio features on this device.
With powerdvd in the advance options for audio ensure its set to 5. or which ever speaker set you have. Same with audio in windows control panel and Creative Surround Mixer.
What codecs/filters are you running? IF you have installed too many codec packs that can/may cause issues.
For the most part all you need is WMP0 + AC3 filter and or FFDshow. Your DVD player software ( your case Power DVD ) and Xvid or full Divx version, for most common AVI files and the like.
In the advance options in Power DVD is there an Audio option for SPDIF? If yes, select it.
Also ensure its set to use your card and NOT default audio device which is, I think wav - direct sound, in other words not full range, you want full range that your card can do. an excample.
WMP has 2 options for its sond device - open up tools, options, devices then speakers - properties. Here you will see default direct sound and then your card. You should have simular setup system in Power DVD.
If that fails.
Can you uninstall Power DVD and try WinDVD, you may have this with your mainboard?
If you can get WIN DVD ensure its set up to use SPDIF.
Ok, try that for starters and see how you go.
It will be somthing simple Id say

Plz Help: Audigy 2 ZS Probl

Hello Everyone at Creative/Forum Users! I'm new here so nice to meet you all...
I have a 5. speaker system using them with Audigy 2 ZS Platinum...
Scenario: When I'm calibrating the speakers .. I hear the correct sound through the right speaker... like when the person is identifying the speaker, it's the correct ones (rear ones work here)....all settings are on 5. ... but when i click to hear the 'Channel' or 'Noise' test in the creative program i hear the 'Rear Left' in the 'Front Left' and the 'Rear Right' in the 'Front Right' ... What is the problem?
My games aren't detecting the Surround Sound either ( GW:Nightfall and NFSC )
I've already tried uninstalling the drivers, restarting and installing either with my original cd driver / website driver ...
Thanks for anyone that dropped by!

I'm not sure if your webcam have AEC feature but if it does, you can try disabling it and see if it hel
ps.
http://logitech-en-amr.custhelp.com/...li=&p_topview=
Jason

SB Audigy 2 Value probl

Hi
I'm new around here and I hope someone will be able to help me.
A few days ago, I bought a Sounblaster Audigy 2 Value card and installed it in my computer. Everything went well. I configuured it to go with my then, 2 stereo speakers.
Two days later, as I was very satisfied with the card, I decided to add much better 5. speakers. I could not find the quality Soundblaster speakers I would have liked in my area so, I finally decided to buy the Logitech Z5500 digital speakers.
I intalled the speakers and just about everything went fine except I have a few problems.
The speakers (all 6 of them) play very well but when I try to play a DVD and use the "DTS surround" setting, I have no sound at all. If I use the "Stereo surround" setting, everything is fine. For example, on the Eagles "Hell freezes over" DVD, there is a song that can only be listened to if you have a DTS decoder, well, I can not listen to that song.
Another "problem" has to do with the Creative "Speaker calibrator". Even if I modified the settings to "5.", it only recognizes 2 speakers on my system(even if all 6 speakers are playing).
When I tried testing the speakers, I can only hear the sound/voice in the "Front left and front right speakers. No sound whatsoever in the remaining four speakers.
Maybe I should not have listened to the guy who sold me the speakers. He assured me that all I had to do was connect the green, black and yellow cables from the "Digital Sound Touch Control Center" to the soundcard and that it was not useful at all to buy a coaxial or digital cables.
I would appreciate some help, please.

see this:
http://www.driverheaven.net/showthread.php?t=94965

Audigy SE Mic Probl

I recently got an Audigy SE and plugged in my headphones to the Line-in (Green plug) and the mic to the "Flexijack" (blue plug). Now, my mic is not recognized by Windows. If I try to open Teamspeak. it says I do no have a sound.out device. If I try to test hardware, it does not see the mic. I am sure it is plugged in the correct spot. Furthermore, I went into the mixer and apparently the microphone can be set both as a source and a recording device. Anyway, I went in there and made sure mic was set as a recording device. Whenever it is set as the recording device, I hear a low hiss in my headphones, yet when I switch my mic to the headphone plug, it doesn't pick up on the mic there, either.
So, basically, the card is not picking up my mic, and if I have my mic unmuted, then I hear a hiss in my headphones. Anybody have a suggestion?

Same card, same issue with the mic not being recognised even though the line is swithced off.
There are a lot of issues here posted that go unanswered and unresolved and i think the lack of input or help from creative admins says quite a lot.

Sound Blaster Audigy 2 ZS Probl

Alright, so here's the scoop on my problem. I have a pre-built computer, an e-machines T4892 that I have been upgrading on my own. I added a Radeon 9800 PRO graphics card and that works just fine. Today for a late birthday present I got the Sound Blaster Audigy 2 ZS Sound Card I asked for. Before installing it I had the integrated audio of Realtek AC'97 Audio. I believe I removed those drivers but I'm not quite certain, I want to Add/Remove Programs and removed Realtek AC'97 Audio and it's now gone. Yet when I go into C:\Drivers\Audio the Realtek Icons are still there plus the Installation icon. So when I started up my computer after I put the card in, I bought this card from www.newegg.com by the way, the things in the bottom right hand corner that tell you you have new hardware popped up and all of that, it asked me to install from a specific location such as the installation cd or an advanced location, I clicked specific location because I put in the CD. It said it could not find it. So I just shrugged and went double clicked on the icon for the D: dri've and the autorun started. I installed the drivers and the Music player I forget the name. Everything was good, so I restarted my computer. When I log into my account (this is a shared computer) everything starts up fine except about 5 seconds later I look at my taskbar and Audigy.exe pops up and all of a sudden my computer restarts. I continued to log into my account and this kept on happening. So when I logged in for the last time I quickly did CTRL+ALT+DEL and went to processes, endeded audigy.exe and I was able to keep my computer on, this is currently how I am running. So I decided the audio driver was probably out of date so I went and downloaded the new drivers and restarted my computer. When I logged into my account, there's usually a windows sound that plays, that did not play, and 5 seconds later the computer restarted again. Plus when it restarted in the bottom right hand corner a little box would come up saying a Multimedia Audio Controller has been detected and it would come up and say Install the Software automatically (Recommended) and Install from a list or specific location (Advanced), before it would restart. So now I'm stuck with the problem of my computer restarting if I don't quickly end audigy.exe and I have no sound. If you could help me that would be great.

I've been fiddling around in the Device Manager and it has Other Devices and under it is Multimedia Audio Controller, I can choose to either reinstall the driver udate the driver, disable it, or uninstall it. Here's what comes up on properties
This device is not configured correctly. (Code )
To reinstall the drivers for this device, click Reinstall Driver.
Help would be appreciated here. I'm a big gamer and would like to have this up and running before our first CAL Match.

Audigy 2 zs probl

ok I run windows xp x64 pro and im having some issues it started just today but I noticed when I tried to play some CSS my sound wasnt workin on my 5. system.. I looked in the console and this is what I found.http://img34.imageshack.us/img34/9334/ssdp4.th.png" alt="Free Image Hosting at www. ImageShack.us[/img]> ok wheres the other speaker settings right? thats what I want to know, so uninstalled the audio console and I uninstalled the device from my device manager, i've done system restores and it stays the same... so when I did try to reinstall the drivers. it gave me a message saying it could not due to a previous driver installation.. ok I tried rebooting the comp and then doing it .. didnt work... my cousin... 2 years old broke my official.. driver cd so i dont have none of the good stuff anymore =\ but i use the drivers that the website provides instead.. I have no problem with them... I want to know how I fix it... and why its doing it to be exact.

i guess we're in the same boat.
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=3905
however i do see all speaker options but they just don't work side difference i have audigy 2 ZS.
anyways if u want to uninstall the drivers here what u got to do
get http://www.rarlab.com/rar/wrar37.exe download it and (install to make easier on the last page of the installer enable Cascaded context menus) no need to buy it extracting is free
now download or if u already have the driver right click the file if u enable "context menus option" in at setup u should see winrar go "extract to your file name" in my case SBAX_WBUP2_LB_2_09_006
inside the folder SBAX_WBUP2_LB_2_09_006 open it go in the driver folder and clickon the setup.exe choose uninstall drivers & delete all shared Creative audio files.
and that's that u will be able to install againMessage Edited by ATT-Half on 02-03-20080:22 AM

Sound blaster Audigy LS install probl

HI, I just bought a sound blaster Audigy LS, and after installing the card Windows finds the new hardware,but when I put in INSTALLATION CD I get "setup could not detect any sound blaster audio card on your system" I`ve disabled all onboard sound and old drivers,and tried ALL pci slots now as well. Im very sure the card is fitted correctly, the model no is: SB030. any advice would be very helpful. Thanks alot ` WILLEEEE `

All,
In order to give any helpful suggestions to these kinds of problems we will need a couple of extra bits of information:
) Steps already taken to resolve problem
2) System Specs including processor and chipset
3) Model Number of the sound card
4) Operating system and service pack
Willeeee provided most of this, however he has also done all of the steps I would suggest without knowing #2 and #4. In all of these cases it is worth trying to install the latest drivers from our website. I know that the original Audigy can be installed using only the drivers found on the webpage and I would suggest trying that first. Also make sure that you have tried different PCI slots in your system.
Jeremy

Audigy ZS digital probl

My hard dri've died a couple of weeks ago, so I sent it and just got the new one and installed windows.
At the same time, I installed a new power supply since my old one was incompatable with my system, especially my video card. It would always crash the video card, but it's an ati so i wasn't suprised it sucks. anyway, now with the new psu, i'm able to have fast write on my video card, and install sp2 and all the via chipset drivers.
I know the via chipset is by far the worst out, but theres no reason the problem I'm having should be happening.
With my audigy ls, it always worked fine with xp pro sp running digital out at 96/24 bit to my z5500ss. Now, with xp sp2 and the via drivers, i can't get it to work right at 96k, i'm stuck at 48k. it seems to keep losing connection with the speakers. Like im not doing anything and it will keep poping up on the speakers "No digital data" then a split second later it will come back on. That sound makes this irritating poping sound in the speakers. When music is playing, the same thing will happen and the sound will keep cutting in and out and making that poping sound.
I was always told that adding the via drivers made speeds between processor/pci and processor/agp way faster. In my case it's limiting it so much I can't even get full quality out of my 3 year old sound card.
My system specs are:
asus a8v deluxe
a64 3400+
gb dual channel 3200 ram
ati 9600xt 28mb
creative audigy ls
win xp pro sp2
Whats going on here? And how can I fix it's
Thanks,
Mike

Model of my soundcard is Audigy LS, as You have written above.
I do not know why I was asking about ZS...
I found those drivers :
http://uk.europe.creative.com/support/downloads/download.asp?Product_ID=923&Product_Name=Audigy+LS &OSName=Windows+XP&OS=0&DriverType=&details=
Are they good to install ? My current version of drivers is 5.2..24 .Message Edited by 8thpassenger on 07-3-2005 02:5 PM

SoundBlaster Audigy SE speaker probl

I bought a Creative Soudblaster Audigy SE sound card last night because I was told that I needed a sound card that supported 5. speakers. I have 4 Dell speakers and a Dell subwoofer. Two of the speakers are connected directly to the subwoofer and the other two speakers are connected seperately. The two speakers and the sub was an upgrade but I liked the sound of my old Dell speakers so much that I kept them. After I bought the sound card I hooked the first set up of speakers to the green line out jack. Then I hooked the 2 speakers and the subwoofer up to the orange line out jack. I then tried my speakers and the 2 speakers that are connected to the green jack work but the 2 speakers with the sub don''t work. I then got a splitter and hooked it into the green out jack and hooked all the speakers into that jack, but only the 2 speakers continued to work the subwoofer and the other 2 speakers I continued to get no soundo out of them. I'm not sure what else to do.

so once again i got the 5 speakers working in windows playback devices but now when i play a dvd i get the quite voices again which always seems to happen once i get all 5 speakers working through cmss and the eax panel. when watching regular tv through windows media center i have no probems with sound because i believe that is just stereo not dolby. i read all about tweaking the settings from front to back and this had no effect just another problem that cant seem to be solved.

Soundblaster Audigy 4 instalation probl

I have trouble with instaling entertainment center, when i instal drivers from original cd it stops after 50% and doesn't respond i think it stops when it instal entertainment center. Every time when i do it its the same. Where in internet can i find entertainment center instalation files or what i should do to avoid it in the future?

You definately don't need the CD. Here's what I did:
Uninstall old SoundBlaster stuff. Everything, anywhere I could find it.</LI>
Do complete install (without IR-receiver installed).</LI>
Wait 2 days (I never thought I'd use the IR-receiver).</LI>
Install IR-receiver - I don't remember if I had to "cancel" anything, but I do remember that whatever driver was needed was installed when I did the complete Audigy 4 install 2 days prior. Upon prompt, I rebooted.</LI>
In my case, I moved the IR-receiver to another port (on back, instead of on front of the PC). Again, it auto-detected. Again, it prompted me to reboot.</LI>
Personally, I'd try 00% of the above, except substitute "reboot" for "Wait 2 days". A lot of messages suggest install of the Audigy can be fussy. In your case, you may care to double-check for any USB drivers (Control Panel, System, Hardware, Device Manager) you don't need.

Soundblaster Audigy - guitar connection probl

I bought the Soundblaster Audigy soundcard w. front-deck and so on from a friend.
The sound out works just fine, but it does not register the sound in when i plug in the guitarjack. I have tried many things, like checking that something's not muted and so on... but nothing works.
Could really use some help, it's getting frustrating...

Wrothgar,
Try following these uninstallation steps from this Knowledgebase article SID72. After you have finish uninstalling and removing all the files as instructed from the guide, do not reboot but shutdown the computer and remove the soundcard from the computer instead. Next, power on the computer without the soundcard and then let Windows finish its startup before shutting it down again. Slot the soundcard back into the computer and proceed with the re-installation from the CD.
Jason

Audigy 2 + 7.1 Probl

Similar Messages

Maybe you are looking for