Audigy 2 ZS + 5.1 System + WinXP x64 Subwoofer don't work

Hi, i've a Audigy 2 ZS an a new 5. Soundsystem, but I'm not able to make the Subwoofer work. I can't find the Bass Options in the Audio Console. How can I enable the Subwoofer under x64. Are there any other tools to enable it's Please help me!
After running some tests, I found out, that the subwoofer works on PowerDVD but it won't work in games or on music players, how could that be possible?Message Edited by ChaTTeRer on 03-5-200603:46 AM

Try this link:?http://forums.creative.com/creativel....id=979#M47773

Similar Messages

Add-ons that work fine with FF3.6.13 in 1 WinXP SP3 computer don't work in this same model machine.

Among the installed add-ins are Ghostery, Google Shortcuts, IE Tab Plus, InformEnter, Lazarus, NoScript, and ZoneAlarm Toolbar. In the other machine, most of those put icons on the status bar; here only the last does (although I told others to). I assume the "problem" is with Firefox, not the individual add-ons.
Also (related?) all of the tabs are very small, showing only icons except when the mouse hovers over them.

1-8 & 10-11 were N/A or already OK. 9 MAY have been the right answer. Here's why "MAY":
I closed Firefox, then zipped & deleted the 3 listed files. When I restarted Firefox, this message popped up:
"Firefox has a built-in session restore feature. Would you like to enable built-in session restore and disable the Tab Mix Plus Session Manager?"
I chose Yes. When Firefox came back up, the add-ons' status bar icons and other indicia returned. I assume that corrupt config. files was the correct diagnosis, but thought I should mention the other possibility.
Thanks for the help! Not the sort of thing I'd have found on my own. And thanks for the thoroughness of the reply. So often someone only supplies -- to be fair often only CAN supply -- the solution that worked for him.

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

Shockwave Player 11.6.0.626 will not work on WinXP x64

OS: WinXP Pro x64, fully patched (sp2)
Browsers: IE8, Firefox 4.0.1, Chrome (most recent version as of 6/15/11)
Shockwave 11.6.0.626
(Flash 10,3,181,26)
IE8 - cannot read Flash/Shockwave test page: tab crashes with Windows crash of something regarding "AutoComplete".
Firefox 4 - Shockwave plugin appears to be installed, but plugin not detected on Flash/Shockwave test page (Shockwave area of page is blank).
Chrome - "Missing plugin" for Shockwave.
All previous versions of Shockwave worked perfectly on this computer in all browsers.
Any ideas? Was this version of Shockwave tested on WinXP x64?

This error is in the System event viewer:
Generate Activation Context failed for C:\WINDOWS\system32\Adobe\Shockwave 11\DYNAPLAYER.DLL. Reference error message: The system cannot find the path specified.
As I mentioned earlier, there is no C:\WINDOWS\system32\Adobe\Shockwave 11 directory, Shockwave was installed to C:\WINDOWS\SysWOW64\Adobe\Shockwave 11.
Looks like a bug to me. Is there a workaround?

WTF Creative fix winXP x64 driver new beta drivers still have the 4GB memory limit is

SBAX_PCDRVBETA_US_2_8_000.exe
I just pop in my audigy 2 ZS to see if beta drivers released June 8 fixed the no 5. issue with pass drivers unless u had no more then 4GB or limited the OS to 4GB using boot.ini
*no sound from my center and rear speakers
"the Known Issues:
* When using 5. Speaker configuration, no audio output from the Center/Rear channels.
?? To restore audio output in Windows XP: Launch Play Control Panel, click the Speaker Volume button, then click the Restore Defaults button."? (did not work no matter how many times i tried it's + also did numeros reboots)
doesn't work ? only after adding /MAXMEM=4096 did everything start working like it should.
my computer has 8GB of ram and by using this fix the other 4GB go to waste why is this issue fixed on Vista x64 drivers but NOT on XP x64
come on Creative WTF?:angry:
so creative nothing was fixed for WinXP x64 with this beta driver !!!!!!!!!!!
Message Edited by ATT-Half on 06-25-2008 07:8 AM

Re the F8 trick: Thanks. Still very annoying, as it needs to be pressed and selected on every boot. Still, it's a workaround. Re "hey it's only beta" and "not signed on purpose", I will argue that not signing drivers puts an unneccessary installation hurdle before the user. Worse, it is not readily apparent how to circumvent that hurdle. That drastically reduces the number of users that will install and use the driver, and could thus give feedback on it. My assumption is that Creative have released the beta drivers publically to get a wide range of good feedback on their performance. Also, to give the most impacted users an alternative to just removing their Creative card and falling back to onboard sound. Both objectives are more easily achieved if the driver can be installed - and used - without needing to go through an F8 boot menu on every startup. The driver is already designated as beta and carries a prominent expiration date. Not signing the driver does not do anything to alert the user of the fact that this is a beta that the expiration date popup did not already do. Look to graphics cards. You will find beta drivers there, released mainly to relieve pressing issues in-between driver releases. Those drivers are signed, yet no one doubts that they are beta drivers, not least because they are released on a page that displays a very prominent BETA logo. Creative has goals in publically releasing beta drivers, which won't be met if users can't install the drivers.

Firebug 1.6.2 doesn't work on firefox 3.6.13 ; system: winxp 5.01 sp3

firebug 1.6.2 doesn't work on firefox 3.6.13 ; system: winxp 5.01 sp3
grayed out firebug icon; browser shows for example in VIEWS menu: firebug.Firebug F12

i have met the issue, and want to know to know how to solve it?

ORA-12154 on WinXP x64

Hello,
I have a WinXP x64 with Oracle Client 9.2
it works fine with SQLplus,SQL Navigater and XAMPP server
but with Golden and Crystal I get everytime an error
"ORA-12154 could not resolve service name error"
with a normal WinXP SP2 I did not have problems
Has anyone a solution for my problem?

Did you ever find a solution? I have the same problem.
I have tried the Oracle 32 bit and 64 bit client applications. Both were installed in C:\oracle\product... when I tried them. The 32 bit client was 10.1.0.2 and the 64 bit was 10.2.0.1. Both will not allow me to use an ODBC connection in MS Access.
MS Access is part of Office 2003 and is installed in the C:\Program Files (x86) folder. I even tried installing Access from Office XP in C:\Program Files and had the same results.
I have tried creating the ODBC connection from Control Panel>Administrative Tools and from C:\Windows\SysWOW64\odbc32.exe. Both would let me connect to Oracle successfully, but when I try to use them in MS Access I get errors. For the 64 bit ODBC driver I get an error that it isn't installed, and for the 32 bit ODBC driver I get an ORA-12154 TNS names error.
HELP!

K8N Diamond Plus SiI 3132 WinXP x64 non-RAID drivers?

Hi
I'm looking for non-RAID drivers for the SiI 3132 on my K8N Diamond Plus for WinXP x64 (I managed to fine the x32 ones and they work fine so I know it's not the drives or the moboard. I tried the drivers on MSI's website.
I've searched around the forum and followed the leads onto planetamd64 and the Asus website for them, but to no avail.
To be precise, I have selected non-RAID in the BIOS, and the drives to show up on on the POST screen, but do not appear in Win 64; there is the classic exclamation mark in the device manager for a 'Mass Storage Device'. I don't want to concatenate the drives in RAID mode, so I did not try booting with that selected in the BIOS lest it destroy the stuff I have on them.
[I miss the simple JBOD option in the 3114...]
Any help gratefully appreciated!
thx
bn

Hi all,
I solved the problem.
You won't find the drivers under the drivers section of SiI's website but you will in the Knowledge Base. Look under Serial ATA | COntrollers | SiI3132, you'll find article 11043 'SATA 64 bit Windows IDE driver - released' dated 8/19/05. Click under that and you'll find a file 3132_win64_idrv_1004_logo.zip. It's what you need.
Hope this helps someone.
bn

Model e9300z with operating system Windows 7 -video driver stopped working properly

I have a HP Pavilion With Microsoft Windows 7 Home Premium System type: x64 -based PC Product number:AZ217AV-ABA.
Shows PC issue-
AMD/ATI Video Driver has stopped working properly. Can someone please advise on how to correct this? That I am aware of I did not make any changes to the system at all.

I suggest installing the updated driver below from HP to see if it resolves the issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-112311-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Flash videos don't work with PepperFlash disabled (but with system plugin enabled) on Chrome!

Hello everyone,
Basically, Google Chrome lags a lot when I use PepperFlash and so I have heard that disabling it and using the system flash will have better performance. I have done this but when I disable PepperFlash, the flash videos don't work as it says flash player has crashed. Also, I would like to resolve the lag and bad performance with flash videos on chrome because the video playback on Internet Explorer is a lot better than Chrome(Never thought I would have to say that) atm. A possible solution might be to install 32-Bit Chrome instead
Summary:
Flash videos lag(most likely due to PepperFlash being used according to other people)
When PepperFlash is disabled, the system flash plugin does not work in chrome as it apparently crashes every time.
I would like help on how to resolve the bad performance and be able to use the system flash plugin to have no lag on videos and livestreams.
Thanks,
Talha
Google Chrome 64-Bit
Windows 8.1 64-Bit

If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

Start and Start apps don't work after System Restore

Hey guys, I tried to install Andy (Android emulator) on my PC today and I had to reboot after the setup was complete. This time when booting up, my computer froze before login screen. I've restarted the computer several times, but no login screen.
So I used System Restore to restore my system (refresh point is 2 days old) and voila, everything works like it should...
Except for Start menu, Cortana & search bar and notifications. Restarting explorer.exe didn't fix the problem. Even Start menu apps like Music or Store don't work... Only way to open the Settings app is to click on my network connection icon. Help please!
I'm using build 9926

..............So I used System Restore to restore my system (refresh point is 2 days old)...............
It is possible that you are missing the updates that were installed in that 2 days. You rolled back 2 days, now you need to reinstall those updates.
If you cannot use Start Menu, please follow this instruction given by Insider Hub......
Checking for updates may fix this problem. To check for updates without the Start menu, do the following:
Select the Internet Explorer icon.
Type http://update.microsoft.com into the address bar and select
Enter.
If you are prompted to run a control, click
Yes or Confirm
This should bring up the Check for updates window. Install updates.
If no update is available, or the available updates don’t fix the issue, restart the device–this should make the Start menu appear. To reboot without using the Start menu:
Hold down the Windows key and select L to lock the device. Swipe up or select
Enter to open the sign in screen. Select the
Power icon on the log in screen to restart the computer.
OR
Hold down the Windows key and select R to bring up a command prompt. In the prompt, type
shutdown –r to restart
Good luck.

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500. HP says to go through Preview, Image Capture, or Print/Scan in System Prefs. Still doesn't work. Any ideas/similar experiences?

Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?

Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have uploaded an old itunes library by mistake - any way that I can go back to my previous library. Unable to do a system restore and I don't know where to find an up to date music/playlist file.

I have uploaded an old itunes library by mistake - any way that I can go back to my previous library. Unable to do a system restore and I don't know where to find an up to date music/playlist file. I was originally trying to recover a playlist that vanished after I had updated one of the ipads, did an online search, followed the instructions only to discover that I had loaded an itunes library from 2 years ago. Stupidly I thought that it had updated itself and didn't realise I had to do it. Any he

See Empty/corrupt iTunes library after upgrade/crash. Hopefully you have a more recent library file that you can restore.
tt2

Is there a shelf stereo system that has a dock that works with the 4th Generation Touch?

Is there a Shelf Stereo system that has a dock that works with the 4th Generation I Pod Touch?

Did you already check the Apple Store online? http://store.apple.com/us/browse/home/shop_ipod/ipod_accessories/speakers?mco=Mj A4ODE3NDA

Audigy 2 ZS + 5.1 System + WinXP x64 Subwoofer don't work

Similar Messages

Maybe you are looking for