Audigy 2 ZS - Headphones work, Digital Out does not

Just install an Audigy 2 ZS. Bought a miniplug-RCA plug adaptor to connect it to my digital coax cable into my Onkyo receiver. Headphones show that sound it working. Onkyo shows no PCM signal received. I know it works because my last computer used the same amp and same cable. Is there something in the software I'm doing wrong? I'm tried switching the frequency rate, the digital out only, 2 speaker and 4 speaker settings. What am I doing wrong?
John

SoonerFann,
One thing to consider is that the digital out on the back of the Audigy 2 ZS is not an actual SPDIF out. It uses the DIN interface which is similar in form, but has a different rating on the voltage of the connection. Most receivers will still work with it, but some will not. This is most likely why it is not showing PCM on the receiver. If you have the platinum dri've, there is a true SPDIF on it but we cannot guarantee that it will work with a receiver using the DIN on the Audigy 2 ZS.
Jeremy
P.S.
You know, I am located just down the highway from your college of choice. It happens to be the heart of "Orange Country" but still is cool to see someone who is a fan of the "other school" on the forums.

Similar Messages

SB Live 5.1 - Digital out does not wo

With the Sound Blaster Li've 5. that I have, I have never been able to get a digital signal to play. My first theory is that my A/V Recei'ver (Onkyo TXDS 747) from 998 can only handle a digital coax signal of 48kHz. Is it possible this receiver is too old to handle digital in? If that is the case, can I de-tune the sound card with some setting to an output that my receiver would accept?
Secondly, what is the proper adapter to use to go from the mini-jack to the full sized digital coax table? (The proper term may be SPDIF).
Thanks!

That's right, I have no sound at all out of the digital jack. Analog works fine. I did more digging and found the manual on this site and it says to you a mono mini-jack to RCA adapter. So I think I'm good with my connection. So there must be a software adjustment of some kind.
Any other long shots you can think of?
Thanks!

Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

TS1559 I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem

I have 4s. After I updated ios7.0.3 my wifi is geyed out. I expected after ios7.0.4 update wifi will work again, but does not. It annoying, because I have to use my data... Does anyone know when it will be fixed or does anyone have the same problem?

I have the same problem. After the upgrade, my wifi is greyed out, and the battery won't hold a charge long. I reset all the settings, tried all the things suggested by Apple, but it didn't work. I took the phone to Verizon, but they said they can't fix it, go to Apple
I made an appointment at the Genius bar, where the staff was incredibly rude and dismissive. A representative told me that the wi-fi is broken and I would need to buy a new phone for $200, because mine is out of warranty. I'm due for an upgrade in a few months, so I'm not going to pay $200 for another 4S now. I'm also not going to buy any more Apple products. Their upgrade caused this problem, and they are not standing behind their producet.

Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!!

Hi.. I received my Iphone today. It has tiny scratches at the corners. ALSO, i cannot hear anything, have to use headphone. Siri works slow and does not speaks!! Anyone with same problems? What can i do now?

What if they say i scratched it by dropping or something (which i obviously dint)? will they still replace it?
It even has the plastic on it yet..!!

Digital editions does not recognise Samsung Galaxy Tab 7.7

Digital editions does not recognise my Samsung Galaxy Tab 7.7. The device is authorised. Please help. Thanks

Your last post is confusing - and the technology is unforgiving. So let me
see if I can piece this together....
Starting with the Tab 7.7: some manufacturers have devices that they
improve upon and claim compatibility because they're 'just like' XUY that
they made last year. Sometimes this is true, but often, the user ends up
with claims and not much function. Samsung is pretty good about this, but
you can't assume that, just because you can connect the Tab to your
computer and move stuff back and forth, that the programs on your computer
are going to work with your Tab - and vice versa.
The OS on the tablet is NOT compatible with ADE, so you can't drag and drop
ebooks as you would with other ereaders. You have to use utility programs
to move the ebook to your Tab. Once you move the ebook to the tablet,
Aldiko should be the program that you use to read the ebook. In your
situation, all ADE is doing is retrieving the ebook from the source, and
storing it on your computer.
You mention "software/apps that are available for DRM". DRM is the copy
protection on an ebook. It's a software switch built into the ebook's ID
file and all that it does is to tell you whether or not you can copy or
print the ebook. ADE and Aldiko look at the switch when you open or try to
copy the ebook. And if the DRM settings are preventing Aldiko from opening
the ebook, you're stuck. Those settings come from the publisher,
distributor or author, not from either ADE or Aldiko. You can try to open
the ebook on your computer with ADE and see if you get the same results.
You mention error messages. I think, from the context, you're getting them
on the Tab when you try to do something with the ebook. Any messages
relating to time relate to the settings for your time, date and time zone.
I'm guessing here, but I think your Tab's settings aren't the same as your
computer's, and that's why you get the 'expired' message. The 'unknown
error' message may be from Aldiko - and we're not equipped here in the ADE
forum to deal with that one - sorry! If the error message section of the
Aldiko user guide doesn't tell you either, then you might be able to find
out what to do about it from an Aldiko forum.
Your Overdrive comment has me puzzled. I looked for some context in the
other posts in this stream, and I didn't see anything that helped.
Overdrive is a 'elibrary management system' that does much the same thing
as ADE does. So, you can import and export ebooks via Overdrive. Your
situation seems to revolve around how you get ebooks onto your Tab and then
get Aldiko to open them for you to read, and I don't know if Overdrive
supports the Tab either.
==========

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Logging out does not drop me to console but a black screen

Recent pacman -Syu upgraded me to latest xorg-server and I have this problem: logging out does not drop me back to console but a black screen and after 30 seconds, a blinking cursor. Nothing works and I have to reboot. If I choose to reboot (instead of logout) I get the same result except that eventually the computer reboots. Using nv - no problems. Using simple nvidia (single screen) - no problem. (I have a monitor and tv-out setup). Problem remains whether I use xfce4 or fluxbox. And the ctrl-alt-backspace keyboard shortcut results in the same black screen. Xorg.0.log tells me nothing. Before the upgrade, no problem.
I usually use startx and I have ck-launch-session etc in my .xinitrc. I use the latest nvidia-96xx driver and have no other X problem. Everything works, including the tv-out.
This is a minor inconvenience really and I usually switch to a console and as root killall X if I need to log myself out for any reason. But if anyone as a clue as to why this is so, or suffers the same problem, do let me know. Thanks.

Thanks guys...
@ckristi - I don't use kdm. I startx from console when I want to go into X.
@madtux - I guess I will have to read up on kernel mode setting and KMS - I actually don't know what you are referring to although I have seen KMS refered to in this forum with reference to xorg. Any links? Do note no problems with nv and single monitor nvidia. Hopefully the cure is not worse than the disease.

HT203171 The two finger enlarging works sometimes and does not work other. What to do.

Two finger zoom in and out does not work most of the time. The two finger tap does work. Why does the two finger zoom not work. Checked settings and it is on.

It only works in some Apple applications. For example, it works in Safari but not Firefox.

Digital signature does not validate with the given key

We are switching our single-signon provider from openssl to Weblogic's SAML. I am trying to create a test application that will send mock SAML assertions to our test Weblogic SAML server before we begin integration with the client that will send real SAML assertions.
I have configured a Weblogic 10.3.5 instance to be a SAML Service Provider as well as created an application that creates test SAML assertions to post to the SAML server. I'm currently using a self-signed certificate to sign the SAML assertion. I've imported the self-signed cert into both the DemoIdentiy.jks and cacerts on the Weblogic SAML server.
The Weblogic SAML server is giving the following error when trying to validate the signature of the assertion:
<SAML2Assert: Start verify assertion signature>
<SAML2Assert: The assertion is signed.>
<SAML2Assert: Digital signature does not validate with the given key
org.opensaml.xml.validation.ValidationException: Digital signature does not validate with the given key
at org.opensaml.xml.signature.SignatureValidator.validate(SignatureValidator.java:68)
at com.bea.security.saml2.util.SAML2Utils.verifySamlObjectSignature(SAML2Utils.java:229)
at com.bea.security.saml2.providers.SAML2Assert.verifySignature(SAML2Assert.java:285)
>
I get this error when the SAML assertion includes both the cert and the public key, just the cert, just the public key or neither.
I'm pretty sure I've configured the SAML instance correctly since I followed the steps provided by another group who got this working with a different client. The only difference is they are using a real signed certificate (Verisign i believe) instead of a self signed cert.
I'm looking for any help to track down which step in the process I've missed or implemented incorrectly.
Thanks!
Edited by: 911967 on Feb 6, 2012 12:26 PM

So I found my own answer to the issue. The error was being caused by an the following xml in the assertion:
<ds:Reference URI="">
The value of URI attribute must have a '#' followed by the same value of the ID attribute in the parent 'Assertion' element (in our case a random string):
<saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe" IssueInstant="2012-03-12T14:33:25.986Z" Version="2.0">
<saml:Issuer>ISSUER_NAME</saml:Issuer>
<ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
<ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
*<ds:Reference URI="#a5k42vnhsywezqzyufq15c4bb9xuzeozrmbppj38xe">*
How this is related to the digital signature is beyond me, though I admit I'm very new to saml and digital signing. However I spent a great deal of time investigating my certs and how I was creating the signature, which it seems is unrelated to the actual issue. I also wasn't able to find any docs specifying that this attribute was required, though I might have just missed it.

Google search does not work. It does not bring back any results and disables my internet connection until I close the brower, wait, and then open it again.

Google search does not work. It does not bring back any results and disables my internet connection. I have to close the browser, wait, and then open it again. It only seems to happen when I am signed into my Google account. If I am signed out the search functions properly.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Adobe Digital Editions does not detect my e-reader

Can anyone help please? My Adobe Digital Editions does not detect my Sony e-reader and does not appear in my bookshelves. My laptop detects the device without any issues but Adobe does not - I have re-installed twice but still the same.

Re-installing is not the answer. Most likely, the issue is either the
sequence of events that you go through, whether the SONY ereader is
supported and whether it is registered properly. Let me go through these in
reverse order. I am assuming (dangerous) that the SONY is 'new to you'. If
not, then please accept my apologies.
You start with making sure that the SONY ereader is supported by Adobe
Digital Editions (ADE from now on). Check the list of supported devices
HERE <http://blogs.adobe.com/digitalpublishing/supported-devices>. If it
is, then you know that the rest of the process should work.
Next, attach the ereader to your computer. Let's assume a Windows
machine: plug it into a USB port and wait for Windows to recognise it and
tell you your hardware is ready to use. If you've done this before, check
that Windows has added your ereader as a device by going to My Computer and
looking at the disk drives. Your ereader should show up. Then, if you
haven't registered the ereader with SONY, you should go to their website.
It will look for attached ereaders and confirm that it finds yours.
Register it with SONY, using your Adobe ID and password. SONY will then
write a small record onto the ereader, which ADE needs to see. Close the
SONY website.
Next, bring up ADE. If all is well, ADE will recognise your ereader and it
will show up on your bookshelf. If there's a problem with the ereader, ADE
will tell you that, and we can go from there.
If all is well, you can transfer your ebooks via drag and drop. When you're
done, close ADE, but don't disconnect your SONY until it tells you it's
finished updating itself. THEN eject it via My Computer or the small icon
in the system tray at the bottom right of the screen.
Hope this helps!
==================

Gen 5 has lost volume control of headphones and also radio does not recognize headphones are plugged in.

gen 5 has lost volume control of headphones and also radio does not recognize headphones are plugged in. Any Ideas on a fix?

The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

Audigy 2 ZS - Headphones work, Digital Out does not

Similar Messages

Maybe you are looking for