Audigy 2 ZS Pl and BF2. Arr

I have an Audigy 2 ZS Platinum and have been having a lot of problems with sound in BF2.
It started a couple weeks ago, my sound would crackle and pop a lot. Then it started making really loud screeching noises. After playing for a few hours the sound in the game would start to lag along with the game a little after.
I was told that these new drivers came out, so decided to try them out.
I uninstalled all my old stuff and ran driver cleaner pro.
Installed the new drivers having high hopes. Everything seemed fine and voice is being heard using the mic.
I start up BF2 and all seems ok. I go in to check my volume in the audio options and IT DOESN'T WORK! I press the start tests and nothing is coming through! I play with all the settings, turning off EAX, using software instead of hardware, minimize the game and check the audio options, Nothing fixes it! I go into the BF2 folder and run the VOIP setup test and that works fine. I tried reinstalling the drivers, and that did nothing.
Also, whenever I enter a server, i get this loud sort of pop/crackle noise right before I start playing.
This is the only thing I have done to change the computer and it was working before. So this has to be the problem.
I tried doing what some wrote on here about replacing the file and that has not done anything.
Anyone else having the same problems and getting tired of this not working?Message Edited by Pennybags on 02-0-2006 0:53 AM

Yes, I had this squealing start after I updated from the drivers from 2003 including on my CD that I got in my Audigy 2 platinum I got around December, the squealing was not so common and only happened occasionally, I thought my speakers were dying or my sound card, I ignored it. Then today I installed the 'brand new' drivers, and the squealing/crashing/losing gunfire sounds (etc.) happens WHENEVER more than 4 or 5 noises are played at once, I figured out what causes it for me. When you throw a grenade it's supposed to deafen you with a high pitched sound, but with the new drivers it doesn't deafen you with that sound it merely stops making the noises it was supposed to deafen (gunshots from your gun). Try it and let me know if you notice the same. I find this problem mostly unrelated to the squealing/screeching, and a new problem with the new drivers. I emailed creative about this today and I hope they fix it NOW.
IT'S SO ANNOYING TO HAVE SPENT MONEY ON A 200$ CARD (00$ REBATE, no wonder why!), and have it not work for the very game it's official partner created. Do any of these companies actually work together or is it just a marketing scam, it was the same for everquest 2 and nvidia, they were the worst pair. What's with this?
I guess next I'll try to install it with the 2003 drivers maybe it'll be less frequent a problem, or I'll switch to onboard sound.
This is the letter I sent to creative BTW:
Purchase Date: 2-20-2005
AMD 64bit 3500+ (Winchester Core)
2.20ghz
024mb Corsair XMS Low Latency PC3200 in 52mb x2
05.005 ASUS
ASUS A8N Sli-Deluxe (nvidia nforce 4)
I upgraded the drivers on my software to your most recent driver for the SB Audigy 2 ZS Platinum (SBAX_WEBUP_LB_2_08_0004.exe) from your website, released January of 2006. After installing it I had a massi've amount of problem with intensi've applications such as games. For Example: In Battlefield 2, a game made "supposedly" with the collaboration of Creative has massi've crashes and audio scrambling (high pitched SCREECHING sounds, cracking, crackling, whirring, and all manner of garbled and insane sounds), this did not happen frequently with any of the previous drivers (but it did happen month after getting the product).
I am concerned that either your drivers are faulty (which is odd because you are a partner of DICE, the company who produced Battlefield 2 and supposed to Explicitly support that game), or my hardware is faulty/defecti've. Your website does not list previous driver revisions and gives no solution for this problem.
What I have tried to remedy the problem:
. Uninstalled and reinstalled various programs that were having problems (battlefield 2, etc.)
(Problem Persisted)
2. Uninstalled the Drivers and Audigy 2 card and reinstalled the newest drivers availible on your site. (Problem Persisted)
3. Tested my onboard sound card with the problem programs, and my ONBOARD SOUND CARD Works FINE with those programs. Turned off my onboard sound and tried my Creative Audigy z2 platinum card. (Problem Persisted!!!)
Please assist me in this problem, I am dissapointed that my free onboard sound device works better than a 200$ soundcard I bought from your company with programs that your company Creative is officially partnered with, and since it is not the programs causing the problem explicitly for all sound cards, it must be your card.

Similar Messages

  • SBXF_PCDVTBETA_US_2_07_0004 seems to work perfectly on my Winxp x64 and BF2

    I have a Audigy 2 (non zs) and use Windows Xp Pro x64!
    I play Battlefield 2 on a daily basis! All you x64 users know that there havent been so many good drivers for x64 and creative hardware!! Before when playing BF2 i had often some studders and "lock-ups", where sometimes BF2 got so stuck so i hade to use "ctrl+alt+del" to get out of the "lock"!!
    But the 2_07_0004 released couple of days ago for Vista OSx64, seems to work nice with my WinXp PRo x64 OS and Battlefield 2! So far no lock?s and studders! OpenAl works fine now! Maybe the new driver coming soon for X-FI for WinXP Pro x64 will be great! Hopes up for me!!
    Post if you get same results or even different results please!!

    Yeah you do that!! Because i was wrong, i still get lockups and studders... i was premature in my statement... played BF2 just minutes ago, and ofcourse the "studders" and "lock-ups" were back! So i don?t know if it is hardware failure or if it still is in the drivers? Maybe it'ss that nForce chips doesnt like hardware?s from Creative? Ive read in other post that many people with nForce4 mobo?s have trouble with audigy2 or x-fi?
    Hmm i hope the new driver that is coming this month solves alot of problems? Please creative, i would like to be able play Battlefield 2 without a lot of problems!!

  • Audigy 4 Pro driver and MediaSource iss

    Just bought an Audigy 4 Pro card after getting seriously fed up with my old SBLi've 5. card, however I've got quite a few issues with it.
    I'm waiting on a response from Creative Support but figured I might check if anyone here can help.
    The bundled software with my card was the Audigy 2 ZS CD, and when I tried to install the drivers from that one it said it couldn't find an Audify 2 ZS card on my system and promptly quit.
    I tried a few ways to get around it but no luck, so eventually I downloaded the Audify 4 beta drivers (SBA4_BETADRV_US_2_05_0000.exe)from the Creative site.
    Those drivers installed and now my system show an Audigy 4 card installed with the following drivers: 5.2.3.00
    After installing the MediaSource from the Audigy 2 ZS CD I did not get any EAX control panel, Creative Mixer or Speaker setting though, so basically I'm stuck with nothing but my two front speakers making any sound at all.
    Creative MediaSource version: 2.02.06
    If anyone has a suggestion on how to solve this I'd be extremely grateful, because the current situation is quite annoying.

    The EAX Console, Speaker Settings and Mixer all came in the product CD. You must install them from the CD.

  • Audigy 2 ZS Platinum and Stereo PCM

    #Audigy 2 ZS Platinum and Stereo PCM? Hi,
    Have an Audigy 2 ZS Platinum here and I'm having issues with having no audio when inputting Stereo PCM over Optical Toslink. I tried using both default and internal decoder, but no audio at all. It only works when using passthru/bypass mode. Tried a bunch of stereo inputs and had no audio at all. Is Stereo PCM not supported or what here? The test input streams were PCM two channel 48khz 6bit and 20bit. And Dolby Pro Logic is listed in the decoder tab with Auto, On, or Off. But maybe that isn't the same as Dolby Pro Logic II and that is why there is no audio. Only seems to work with Passthru mode only.
    Message Edited by Seraphic on 04-7-2009 03:07 PMMessage Edited by Seraphic on 04-8-2009 0:44 PM

    Hi, is anyone able to offe some help? Thanks

  • Audigy 2 zs platinum and cubase sx prob

    I bought a creative audigy 2 zs platinum and use cubase vst 2.02.
    I chose creative asio in the vst multitrack window (devices menu).
    the problem is the wave volume level in the creative mixer is not working when i use cubase. with other applications it works fine.
    is "creative asio" the best choice to get low latency?
    any suggestion is welcome_________amd duron ,60 GHz GB RAMXP professional splatest creative driversaudigy 2 zs platinum

    Hi, is anyone able to offe some help? Thanks

  • Audigy LS stops random and functions properly after reboot

    :Audigy LS stops random and functions properly after rebootM I am on a P5P800 motherboard with a SB Audigy LS in PCI2, running Windows 7 Beta and using version 5.2..200 of the driver.
    I had the same problem on Windows Vista (both before and afer SP):
    ? at irregular intervals the sound card stops working. Mediamonkey does not detect the SB speakers anymore and none of the other programs can get audio to play.
    All it takes is a system-reboot.
    I know there is a later version of the driver, at least drivermax tells me there is a newer version. Trying to install this newer version results in the blue screen.
    Any ideas where to look for the solution: I am sure that the chipset drivers are fine and I also tried switching the sound-card in from PCI3 to PCI2.
    Help is wellcome: it is annoying most to have no sound randomly !

    Restart the computer.

  • Audigy 2 Platinum EX and Windows 7 :'''(

    )Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
    With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
    I've just tried with official driver and update.... last driver are very very bad :'''(
    I've partly resolved with unofficial drivers (downloaded on this forum) but external module
    still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
    unusable.... how can i do? Can you help me, plz?
    TXH to all.
    P.S.
    Excuse me for my english....

    )Audigy 2 Platinum EX and Windows 7 :'''(? Hi to all! I'm new here and my english is so bad..... so excuse me!
    With Windows7 (x64 or x84 both!) my Audigy 2 Platinum EX doesn't work correctly!
    I've just tried with official driver and update.... last driver are very very bad :'''(
    I've partly resolved with unofficial drivers (downloaded on this forum) but external module
    still doesn't? work :'''(? i can use only line-in and lin-out, but remote control is completly
    unusable.... how can i do? Can you help me, plz?
    TXH to all.
    P.S.
    Excuse me for my english....

  • Creative Audigy 2 NX OLD and undercapable drivers are way below industry standa

    Hello All,
    I have tried not to push this, for the past year, but I have really reached the end of my patience. The driver support for the Audigy 2 NX (USB-External) sound card is nearly 'non-exsistant'and it is have a major adverse effect on my gaming.
    It has been more than a year since Creative has taken the time to provide the many owners of the Audigy 2 NX -USB sound card with a driver that is anywhere near the capabilities of the sound chip in our device. We do NOT have support for Open AL, we do not have 'REAL' support for EAX 3 or 4 (I mean a driver that REALLY works on most; Lucasarts, EA, and Valve games), and NO HD 'Dependable' support in games or DVD play back.
    This is a crime, seeing as this card costs JUST as MUCH as the Audigy 2 ZX (that I also own, and bought FIRST for my HP zd8230us... and used until HP Tech support told me to NOT use the PCMCIA card) and yet has Half the features and lass than /4 the driver support... for the same money!! That is right, I said 'Crime', because I have been buying and using ONLY Creative cards for the past years and have never EVER seen Creative turn their backs on a product the way they have done with the Audigy 2 NX.
    Let me be 'Brutally Honest' about the lack of support and 'Expanding Use' of a FINE audio chipset. While Creative has regularlly expanded the features and use of the chipset in the ZS notebook card (added EAX 4.0 support, refined the HD support, and made regular driver updates), they have left the owners of the NX sound card BACK in the 20th Century. There is NO support for; EAX 4.0, Open AL, OR THX for my NX the very same people have gone out of their way to provide ALL of those features and regular updates and expansion of these SAME features in the ZX Notebook card. I have both of these cards, and have used both in my HP Pavilion zd8230us Notebook computer. I have to be clear and precise, the difference in; sound, use, and capabilities of the ZX to the NX is like putting a SB 'Li've' card against and Audigy 4 card. I paid the exact same amount of money for BOTH cards, yet (because my mobo does not support the PCMCIA card) I am left with this 'Black Sheep' of the Creative family, and this has me at the point I am seriously thinking of never buying another Creative product for ANY of my four desktops and one notebook in my entire life.
    I am experiancing problems with the NX card on; Half Life 2 and HL2 - Episode , ANY Lucasarts game (they work sometimes and mostly do NOT), MOST EA Games titles, and Activision games are not much better. In my current notebook hardware, my Audigy 2 NX is the 'Weak Link' in the chain. I have a Pentium 4 HT 650 (3.4Ghz-800 Mhz FSB), ATI X-600 PCIe 28MB video card, 024 MB 533 MHz DDR2 RAM, and XP Professional with Media Center 2005. My Audigy 2 NX is what is keeping this system from reaching it's FULL and AWESOME capabilities in; Gaming, DVD playback, TV HD audio, Media Center On Line services, CD & DVD Audio playback, and every other Audio aspect of my near cutting edge system.
    This is completely unacceptable, and to add insult to injury. When ever I contact Creative support regarding updated drivers, or problems with the current *MORE than year old drivers, I am told "Creative has no plans to update or upgrade the drivers for your sound card". WOW, that is the lowest point in years of purchasing and using Creatives (usually) fine products and services. Why has Creative turned it's back on the awesome sound card/chipset and is there ANYTHING that a lifetime user of Creative products can do to get more and better support for the ONLY product you make that is compatible (as per HP) with my new notebook computer? I am dead tired of this product being the 'Bottleneck' in my system. I am frustrated, to the extreme, at the completely apathetic technical support for a 'same priced' item as the ZX.
    What can a consumer do?
    Terribly Desperate,
    Enzo Matrix

    <SPAN>OK, first; thanks for the link. It is very much appreciated. Next, this is the only card <EM>compatible</EM> with my Pavilion zd8230us (as per HP Senior Support Technicains). I was told that the Audigy 2 zx PCMICA was compatible (BY Creative), only to be told by HP that that card can and will do damage to my notebook. I find it very disturbing that Creative would suggest a product that would damage my computer! Last, the box (for the NX) says that it is 24 bit HD audio 96KHz/02db Signal to noise ratio. As well, it clearly states ON THE FRONT OF THE BOX:
    <SPAN>
    <SPAN><EM>"...EAX ADVANCED HD game effects"</EM> <SPAN>
    <SPAN>
    <SPAN>Sorry, but in English (at least <EM>American</EM> English) that means it supports EAX in games, yes? lol So, THEY Are the ones that decided to put that on the FRONT of the box, if it doesn't support it then they should have a class action lawsuit filed against them by EVERY SINGLE person that ever purchased an NX and we should be paid for; purchase price, pain and suffering, and puniti've damages. THEN Creative might learn a lesson. roflol<SPAN>
    <SPAN>
    <SPAN>Now on to the <EM>'driver'</EM> isssue. Simple, Alexs3d2, the American consumer expects 'Driver Updates'. Why? Simple, what version of Direct X was standard when the NX came out, and what version are we using now? Microsoft sees fit to improve the API that Creative is making money off of, but Creative does NOT see the responsibility to the consumer to keep UP with the technology that we end users update on a regular basis. Next, I am tired of people dogging ATI <EM>BECAUSE</EM> they have taken on the responsibility to issue monthly driver updates! Granted, Alex, you may well understand 'what' the driver updates ARE better than the average user. However, that does NOT dismiss the BETTER PERFORMANCE that WE experience every single we update or display adapter drivers! Just because slough (on the part of SOME companies) is accepted by a small cross section of the population does not mean that the rest of us should LOWER our expectations? of the company that WE keep in business. Least THEY forget that WE are the reason they ARE in business!!! Driver updates are <EM>GOOD</EM>. Driver updates are what end users EXPECT. Any company that does not want to support a product that is still on store shelves should just pack up and leave. Period. <SPAN>
    <SPAN>
    <SPAN>Last, here is a little quote from the back of the NX box. <SPAN>
    <SPAN>
    <EM><SPAN>"USB 2.0 is only supported in Windows XP and REQUIRES ONLINE SOFTWARE update(s) from Microsoft and SOUNDBLASTER.COM..." <SPAN></EM>
    <SPAN>
    <SPAN>How the hell am I supposed to accomplish THAT when Creative <EM>screws</EM> me out of what they tell me I require? <SPAN>
    <SPAN>
    <SPAN>In closing; this venue is not the only place that I have been sounding off a bout this problem. I have written Creative (SB) Tech support, and they are giving me 'double speak'. I have kept every single email that they have sent back, and cc'd to another email addy for verification. I li've in California, and you can not swing a dead cat without hitting an attorney. I WAS hoping that Creative would be GOOD and RESPONSIBLE partners, but they have forced my hand. I have filed a complaint with the California Department of Consumer Affairs, and am in the process of gathering users for the afore mentioned 'Class Action Lawsuit'. This way, the PEOPLE get to decide WHAT is responsible corporate stewardship, and <EM>IF</EM> Creative is acting in a deliberate way to misrepresent their products, and their capabilities and <EM>IF</EM> they should have to release Drivers just the way they tell us they are going to on the packaging!! <SPAN>
    <SPAN>
    <SPAN>EnzoMatrix<SPAN>
    <SPAN>
    <SPAN>P.S. Umm, the whole Nazi thing... that is a bit over the top. I am Jewish, and Creative may have killed my love of their products, but I do not know of anyone that they have actually killed. If you know otherwise, let me know... that info could come in very handy in my class action lawsuit!! roflol
    <SPAN><SPAN>P.P.S. Looking at this forum, I get the impression that I am not the only person that feels screwed by SB and Creative. THAT should make for a VERY favorable jury pool for the lawsuit.
    Message Edited by EnzoMatrix on <SPAN class=date_text>07-2-2006 <SPAN class=time_text>2:3 AM
    Message Edited by EnzoMatrix on 07-2-2006 0:2 AM

  • Issues with mobility and autodiscovery with Lync 2013 and IIS/ARR

    Hi all,
    this is my last resort after days and days searching a solution for this problem... unsuccessfully.
    All works fine unless the autodiscovery service with external users and the mobility service for both internal and external ones.
    I deployed a Standard Edition Lync Server 2013 with:
    a consolidated Frontend server in LAN
    an Archiving and Monitoring server in LAN
    an Edge server in DMZ with 2 NICs (one in DMZ network and one in LAN)
    a IIS/ARR 2.5 reverse proxy in DMZ with 2 NICs (one in DMZ network and one in LAN)
    All these roles are on Windows Server 2012 R2.
    No split-DNS is deployed since I have different domains for internal and external. In any case I used the pinpoint DNS tip to resolve some records internally (I followed this guide http://tsoorad.blogspot.ch/2012/10/lync-server-dns-pinpoint-zones.html)
    Here DNS records into internal domain:
    A-record for meet.domain-ext.com points to Frontend server local IP
    A-record for dialin.domain-ext.com points to Frontend server local IP
    A-record for lyncdiscoverinternal.domain-ext.com points to Frontend server IP
    A-record for lyncwebexternal.domain-ext.com points to Frontend sever local IP
    A-record for autodiscover.domain-ext.com points to Exchange server local IP
    Here DNS records into external domain:
    CNAME-record for lyncdiscover.domain-ext.com points to lyncwebexternal.domain-ext.com
    CNAME-record for sipexternal.domain-ext.com points to lyncwebexternal.domain-ext.com
    A-record for meet.domain-ext.com points to Reverse Proxy public IP
    A-record for dialin.domain-ext.com points to Reverse Proxy public IP
    A-record for lyncwebexternal.domain-ext.com points to Reverse Proxy public IP
    I installed and configured IIS/ARR 2.5 with KB2732764 and KB2785586 on Reverse Proxy following the NextHop guide. The local IP address of external NIC on Reverse Proxy is NATTED by a Cisco ASA firewall with public IP address and only 80/443
    ports are permitted.
    The problems occurs when I try to connect whit my Lync 2013 APP on iPad using autodiscovery service, both internally and externally. After some seconds the APP shows the message “Cannot connect to the server because it could be busy or
    temporarily unavailable. Retry.” When I used the IIS/ARR 3.0 the problem looked like an authentication issue, then I came back to ISS/ARR 2.5 version with its KB. Now I cannot understand what is the cause about logfail.
    The same behavior occurs with Android Lync 2013 APP and Windows Phone 8 APP.
    Moreover my Lync 2013 client on Windows 7 can connect internally with autodiscovery settings but it cannot do it externally.
    I'm a bit confused because I cannot understand if the problem is about external webservice of Frontend server or about Reverse Proxy configuration or about Lync Control Panel configuration.
    Here is an extracted of iPad Lync 2013 log (sorry if it’s a bit long).
    Any helps are very appreciated, thansk a lot!
    </SentRequest>
    2013-12-20
    11:33:00.781 Lync[563:3a71018c] INFO APPLICATION
    CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
    called with url = http://lyncdiscover.domain-ext.com/, hopCount = 0, maxHops =
    10
    2013-12-20
    11:33:00.781 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/409:Allocating stream 0x11cbe40 for url -
    https://lyncdiscover.domain-ext.com/ with persistent id as 6
    2013-12-20
    11:33:00.782 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
    Request(UcwaAutoDiscoveryRequest) to Request Processor queue
    2013-12-20
    11:33:00.782 Lync[563:6d00000] VERBOSE TRANSPORT
    CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
    url https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected].
    Sending over direct connection.
    2013-12-20
    11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/385:Submitting new req.
    UrlTrustResolver(0x1201358)
    2013-12-20
    11:33:00.782 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/1783:Successfully started the GetUserUrlOperation
    request for http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
    2013-12-20
    11:33:00.796 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
    Request(UcwaAutoDiscoveryRequest) to Request Processor
    2013-12-20
    11:33:00.796 Lync[563:6d00000] WARNING TRANSPORT
    CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
    NULL credential for serviceId (4) type (1)!
    2013-12-20
    11:33:00.797 Lync[563:6d00000] INFO TRANSPORT
    TransportUtilityFunctions.cpp/631:<SentRequest>
    GET
    http://lyncdiscover.domain-ext.com/
    Request Id:
    0x1201358
    HttpHeader:Accept
    application/vnd.microsoft.rtc.autodiscover+xml;v=1
    </SentRequest>
    2013-12-20
    11:33:00.797 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/409:Allocating stream 0x12028f0 for url -
    http://lyncdiscover.domain-ext.com/ with persistent id as 7
    2013-12-20
    11:33:00.798 Lync[563:6d00000] VERBOSE TRANSPORT
    CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
    url http://lyncdiscover.domain-ext.com/. Sending over direct connection.
    2013-12-20
    11:33:00.798 Lync[563:6d00000] INFO TRANSPORT CHttpStreamPool.cpp/556:Not
    setting TLS as the url(http://lyncdiscover.domain-ext.com/) is not https
    2013-12-20
    11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:33:00.812 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:33:00.813 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:33:04.104 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
    kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
    true  responseHeadersHandle = 12c5d70
    2013-12-20
    11:33:04.105 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
    status = 200 for request UcwaAutoDiscoveryRequest
    2013-12-20
    11:33:04.105 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/455:Scheduling stream 0x12028f0 for release.
    2013-12-20
    11:33:04.105 Lync[563:6d00000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/173:Received response of
    request(UcwaAutoDiscoveryRequest) with status = 0x0
    2013-12-20
    11:33:04.106 Lync[563:6d00000] INFO TRANSPORT
    TransportUtilityFunctions.cpp/925:<ReceivedResponse>
    GET
    http://lyncdiscover.domain-ext.com/
    Request Id:
    0x1201358
    HttpHeader:Cache-Control
    no-cache
    HttpHeader:Content-Length
    1076
    HttpHeader:Content-Type
    application/vnd.microsoft.rtc.autodiscover+xml; v=1
    HttpHeader:Date
    Fri, 20 Dec 2013 10:33:02 GMT
    HttpHeader:Expires
    -1
    HttpHeader:Pragma
    no-cache
    HttpHeader:Server
    Microsoft-IIS/8.5
    HttpHeader:StatusCode
    200
    HttpHeader:X-AspNet-Version
    4.0.30319
    HttpHeader:X-Content-Type-Options
    nosniff
    HttpHeader:X-MS-Server-Fqdn
    frontend-lync.domain-int.com
    HttpHeader:X-Powered-By
    ASP.NET, ARR/2.5
    Ôªø<?xml
    version="1.0" encoding="utf-8"?><AutodiscoverResponse
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    AccessLocation="Internal"><Root><Link
    token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
    /><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
    /><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
    /><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
    /><Link token="External/XFrame"
    href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
    /><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
    /><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
    /></Root></AutodiscoverResponse>
    </ReceivedResponse>
    2013-12-20
    11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
    CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
    2013-12-20
    11:33:04.108 Lync[563:6d00000] INFO TRANSPORT
    CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.109 Lync[563:6d00000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/266:Sending event to main thread for
    request(0x1201358)
    2013-12-20
    11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
    2013-12-20
    11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
    CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
    url = http://lyncdiscover.domain-ext.com/, Hops = 1, status = S_OK (S0-0-0)
    2013-12-20
    11:33:04.109 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/725:Response received for req.
    UrlTrustResolver(0x1201358): S_OK (S0-0-0) (Success); Done with req.; Stopping
    resend timer
    2013-12-20
    11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent
    received.  Status = S_OK (S0-0-0), url =
    http://lyncdiscover.domain-ext.com/
    2013-12-20
    11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryGetUserUrlOperation.cpp/449:Received a root response
    2013-12-20
    11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryGetUserUrlOperation.cpp/456:Running trust check on user url.
    url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
    CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with
    url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
    maxHops = 1
    2013-12-20
    11:33:04.110 Lync[563:3a71018c] INFO APPLICATION
    CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl
    called with url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
    hopCount = 0, maxHops = 1
    2013-12-20
    11:33:04.111 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
    Request(UcwaAutoDiscoveryRequest) to Request Processor queue
    2013-12-20
    11:33:04.111 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/385:Submitting new req.
    UrlTrustResolver(0x11d4d38)
    2013-12-20
    11:33:04.111 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
    Request(UcwaAutoDiscoveryRequest) to Request Processor
    2013-12-20
    11:33:04.111 Lync[563:6d00000] WARNING TRANSPORT
    CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
    NULL credential for serviceId (4) type (1)!
    2013-12-20
    11:33:04.112 Lync[563:6d00000] INFO TRANSPORT
    TransportUtilityFunctions.cpp/631:<SentRequest>
    GET
    https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
    Request Id:
    0x11d4d38
    HttpHeader:Accept
    application/vnd.microsoft.rtc.autodiscover+xml;v=1
    </SentRequest>
    2013-12-20
    11:33:04.112 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/409:Allocating stream 0x125fa90 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
    with persistent id as 7
    2013-12-20
    11:33:04.112 Lync[563:6d00000] VERBOSE TRANSPORT
    CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
    url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user.
    Sending over direct connection.
    2013-12-20
    11:33:04.113 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
    stream 0x12028f0.
    2013-12-20
    11:33:04.261 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/577:Received
    kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable =
    true  responseHeadersHandle = 11cfbd0
    2013-12-20
    11:33:04.262 Lync[563:6d00000] INFO UTILITIES CHttpConnection.cpp/628:Response
    status = 200 for request UcwaAutoDiscoveryRequest
    2013-12-20
    11:33:04.262 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/455:Scheduling stream 0x11cbe40 for release.
    2013-12-20
    11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/173:Received response of
    request(UcwaAutoDiscoveryRequest) with status = 0x0
    2013-12-20
    11:33:04.263 Lync[563:6d00000] INFO TRANSPORT
    TransportUtilityFunctions.cpp/925:<ReceivedResponse>
    GET
    https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
    Request Id:
    0x12450d8
    HttpHeader:Cache-Control
    no-cache
    HttpHeader:Content-Length
    1076
    HttpHeader:Content-Type
    application/vnd.microsoft.rtc.autodiscover+xml; v=1
    HttpHeader:Date
    Fri, 20 Dec 2013 10:33:02 GMT
    HttpHeader:Expires
    -1
    HttpHeader:Pragma
    no-cache
    HttpHeader:Server
    Microsoft-IIS/8.5
    HttpHeader:StatusCode
    200
    HttpHeader:X-AspNet-Version
    4.0.30319
    HttpHeader:X-Content-Type-Options
    nosniff
    HttpHeader:X-MS-Server-Fqdn
    frontend-lync.domain-int.com
    HttpHeader:X-Powered-By
    ASP.NET, ARR/2.5
    Ôªø<?xml
    version="1.0" encoding="utf-8"?><AutodiscoverResponse
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    AccessLocation="Internal"><Root><Link
    token="Domain" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain-ext.com"
    /><Link token="User" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain-ext.com"
    /><Link token="Self" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain-ext.com"
    /><Link token="OAuth" href="https://frontend-lync.domain-int.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain-ext.com"
    /><Link token="External/XFrame"
    href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
    /><Link token="Internal/XFrame" href="https://frontend-lync.domain-int.com/Autodiscover/XFrame/XFrame.html"
    /><Link token="XFrame" href="https://lyncwebexternal.domain-ext.com/Autodiscover/XFrame/XFrame.html"
    /></Root></AutodiscoverResponse>
    </ReceivedResponse>
    2013-12-20
    11:33:04.264 Lync[563:6d00000] INFO TRANSPORT
    CUcwaAutoDiscoveryResponse.cpp/112:location value is internal
    2013-12-20
    11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
    CUcwaAutoDiscoveryResponse.cpp/195:User url is https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.265 Lync[563:6d00000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/266:Sending event to main thread for
    request(0x12450d8)
    2013-12-20
    11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req.
    completed, Stopping timer.
    2013-12-20
    11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
    2013-12-20
    11:33:04.266 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
    completed with url = https://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
    userUrl = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com,
    status = S_OK (S0-0-0)
    2013-12-20
    11:33:04.266 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/725:Response received for req.
    GET-UnAuthenticatedGet(0x12450d8): S_OK (S0-0-0) (Success); Done with req.; Stopping
    resend timer
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x11d4d38
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling
    request: 0x11d4d38
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/163:Added
    Request(UcwaAutoDiscoveryRequest) to Request Processor queue
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
    CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with
    url = https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user,
    Hops = 1, status = W_Cancelled (W0-0-6)
    2013-12-20
    11:33:04.267 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation
    completed with url = http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected],
    userUrl = , status = W_Cancelled (W0-0-6)
    2013-12-20
    11:33:04.268 Lync[563:6d00000] INFO TRANSPORT CTransportThread.cpp/343:Sent
    Request(UcwaAutoDiscoveryRequest) to Request Processor
    2013-12-20
    11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential
    for serviceId(1) returning: credType (1) signInName ([email protected])
    domain () username (mattia.spagnoli) password.empty() (0) certificate.isValid()
    (0) privateKey.empty() (1) compatibleServiceIds(1)
    2013-12-20
    11:33:04.268 Lync[563:3a71018c] INFO TRANSPORT
    CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for
    url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CMetaDataManager.cpp/467:Sending
    Unauthenticated get to get the web-ticket url
    2013-12-20
    11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT CTransportThread.cpp/131:Added
    Request() to Request Processor queue
    2013-12-20
    11:33:04.269 Lync[563:3a71018c] INFO TRANSPORT
    CAuthenticationResolver.cpp/109:Waiting on Meta Data from https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.269 Lync[563:62d4000] INFO TRANSPORT CTransportThread.cpp/343:Sent
    Request() to Request Processor
    2013-12-20
    11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/385:Submitting new req.
    GET-AuthenticatedUserGetRequest(0x1201ab8)
    2013-12-20
    11:33:04.270 Lync[563:62d4000] WARNING TRANSPORT
    CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning
    NULL credential for serviceId (4) type (1)!
    2013-12-20
    11:33:04.270 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/1189:Submitting Authenticated AutoDiscovery
    request to https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:33:04.270 Lync[563:6d00000] INFO UTILITIES
    CHttpStreamPool.cpp/455:Scheduling stream 0x125fa90 for release.
    2013-12-20
    11:33:04.271 Lync[563:62d4000] INFO TRANSPORT
    TransportUtilityFunctions.cpp/631:<SentRequest>
    GET
    https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    Request Id:
    0x1206198
    HttpHeader:Accept
    HttpHeader:X-MS-WebTicket
    xxxxxxxxxx
    </SentRequest>
    2013-12-20
    11:33:04.271 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/1662:Ignoring GetUserUrlOperation event as
    current state is 6
    2013-12-20
    11:33:04.271 Lync[563:62d4000] INFO UTILITIES
    CHttpStreamPool.cpp/409:Allocating stream 0x11c0a40 for url - https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user
    with persistent id as 15
    2013-12-20
    11:33:04.271 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1664:Request
    url was http://lyncdiscover.domain-ext.com/?sipuri=sip:[email protected]
    2013-12-20
    11:33:04.272 Lync[563:62d4000] VERBOSE TRANSPORT
    CHttpProxyHelper.cpp/436:CHttpProxyHelper::discoverProxy : No proxy found for
    url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com.
    Sending over direct connection.
    2013-12-20
    11:33:20.621 Lync[563:3a71018c] INFO UTILITIES
    CNetworkMonitor.cpp/217:Reachabilility Flags IsWWAN(0):Reachable(0):TransientConnection(0):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(0):IsDirect(0)
    2013-12-20
    11:33:20.623 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
    networkAvailableToConnect(CellularDataNetwork) -> NoNetwork,
    isInAirplaneMode(0) -> 1
    2013-12-20
    11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
    CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
    returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
    current network : is not WiFi
    2013-12-20
    11:33:20.623 Lync[563:3a71018c] INFO APPLICATION
    CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
    on StartP2PVideoCall returns false because
    canDoVideoBasedOnNetworkAndPolicy 
    returned false
    2013-12-20
    11:33:20.904 Lync[563:3a71018c] INFO UTILITIES
    CNetworkMonitor.cpp/217:Reachabilility Flags
    IsWWAN(1):Reachable(1):TransientConnection(1):ConnectionRequired(0):ConnectionOnTraffic(0):InterventionRequired(0):ConnectionOnDemand(0):IsLocalAddress(1):IsDirect(0)
    2013-12-20
    11:33:20.905 Lync[563:3a71018c] INFO UTILITIES CNetworkMonitor.cpp/186:Updated
    networkAvailableToConnect(NoNetwork) -> CellularDataNetwork,
    isInAirplaneMode(1) -> 0
    2013-12-20
    11:33:20.905 Lync[563:3a71018c] INFO TRANSPORT CEventChannelManager.cpp/826:Received
    network monitor event so restarting event channel.
    2013-12-20
    11:33:20.906 Lync[563:3a71018c] INFO TRANSPORT
    CEventChannelManager.cpp/520:Moving the event channel aggressive mode.
    2013-12-20
    11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
    CUcmpConversationsManager.cpp/4091:CUcmpConversationsManager::canDoVideoBasedOnNetworkAndPolicy
    returns false because RequestWiFiForAudio or RequestWifiForVideo is true and
    current network : is not WiFi
    2013-12-20
    11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
    CUcmpConversationsManager.cpp/1672:CUcmpConversationsManager::queryCapability
    on StartP2PVideoCall returns false because
    canDoVideoBasedOnNetworkAndPolicy 
    returned false
    2013-12-20
    11:33:20.906 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2070:adIsEnabled
    = 1, sipUri = sip:[email protected], m_internalADUrlInput =
    m_externalADUrlInput =
    2013-12-20
    11:33:20.906 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/255:Discovery is in progress and process state is
    6Ignoring request to start network discovery
    2013-12-20
    11:34:04.274 Lync[563:62d4000] INFO UTILITIES
    CHttpStreamPool.cpp/455:Scheduling stream 0x11c0a40 for release.
    2013-12-20
    11:34:04.275 Lync[563:62d4000] ERROR UTILITIES CHttpConnection.cpp/517:Connection
    timedout for request (0x%u0x12d1ea0) - notifying error E_ConnectionTimeoutError
    2013-12-20
    11:34:04.275 Lync[563:62d4000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/173:Received response of request() with status =
    0x22020005
    2013-12-20
    11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/201:Request 
    resulted in E_ConnectionTimeoutError (E2-2-5). The retry counter is: 0
    2013-12-20
    11:34:04.276 Lync[563:62d4000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/266:Sending event to main thread for
    request(0x1206198)
    2013-12-20
    11:34:04.277 Lync[563:3a71018c] INFO TRANSPORT
    CMetaDataManager.cpp/581:Received response for meta data request of type 60
    with status 570556421
    2013-12-20
    11:34:04.277 Lync[563:3a71018c] ERROR TRANSPORT CMetaDataManager.cpp/597:Unable
    to get a response to an unauthenticated get to url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/210:MetaData
    retrieval for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    completed with status 570556421
    2013-12-20
    11:34:04.278 Lync[563:3a71018c] INFO TRANSPORT CAuthenticationResolver.cpp/239:Deleting
    1 pended Meta data requests for url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:34:04.278 Lync[563:3a71018c] ERROR TRANSPORT CAuthenticationResolver.cpp/288:Unable
    to get the meta data for server url https://frontend-lync.domain-int.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain-ext.com
    2013-12-20
    11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT
    CAuthenticationResolver.cpp/293:Failing request to the request manager
    2013-12-20
    11:34:04.279 Lync[563:3a71018c] INFO TRANSPORT CRequestManager.cpp/273:Failing
    secure request UcwaAutoDiscoveryRequest with status E_ConnectionTimeoutError
    (E2-2-5)
    2013-12-20
    11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
    2013-12-20
    11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/1284:Received autodiscovery response with status
    E_ConnectionTimeoutError (E2-2-5)
    2013-12-20
    11:34:04.279 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryService.cpp/1242:Raising Autodiscovery event with status
    E_ConnectionTimeoutError (E2-2-5) for eventType 0
    2013-12-20
    11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/417:Received
    event for type 0 with status E_ConnectionTimeoutError (E2-2-5)
    2013-12-20
    11:34:04.280 Lync[563:3a71018c] INFO APPLICATION
    CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/496:Raising Autodiscovery event
    with status E_ConnectionTimeoutError (E2-2-5) for eventType 0
    2013-12-20
    11:34:04.280 Lync[563:3a71018c] ERROR APPLICATION
    CUcwaAppSession.cpp/2066:Auto-discovery failed, aborting sign-in!
    2013-12-20
    11:34:04.280 Lync[563:3a71018c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState()
    state=0
    2013-12-20
    11:34:04.294 Lync[563:3a71018c] INFO UTILITIES
    CBasePersistableComponent.cpp/230:Storing 7 out-of-sync components took 10ms
    2013-12-20
    11:34:04.295 Lync[563:3a71018c] INFO UTILITIES CiOsAppStateQuery.h/147:Clearing
    keep-alive timer callback
    2013-12-20
    11:34:04.295 Lync[563:6d00000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/134:Clearing request processor for component
    UcwaAutoDiscoverySession on sign-out.
    2013-12-20
    11:34:04.295 Lync[563:62d4000] INFO TRANSPORT
    CHttpRequestProcessor.cpp/134:Clearing request processor for component
    MetaDataManager on sign-out.
    2013-12-20
    11:34:04.295 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/64:Alert
    received! Category 1, Type 201, level 0, error E_ConnectionTimeoutError
    (E2-2-5), context '', hasAction=false
    2013-12-20
    11:34:04.296 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
    stream 0x11cbe40.
    2013-12-20
    11:34:04.296 Lync[563:62d4000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
    stream 0x11c0a40.
    2013-12-20
    11:34:04.296 Lync[563:3a71018c] INFO APPLICATION CAlertReporter.cpp/117:Alert
    cleared of Category 1, Type 201, cleared 0 alerts
    2013-12-20
    11:34:04.297 Lync[563:3a71018c] INFO APPLICATION
    CTransportRequestRetrialQueue.cpp/725:Response received for req.
    GET-AuthenticatedUserGetRequest(0x1201ab8): E_ConnectionTimeoutError (E2-2-5)
    (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
    2013-12-20
    11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
    2013-12-20
    11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
    2013-12-20
    11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioUtil.mm/322:stopSound
    2013-12-20
    11:34:04.298 Lync[563:3a71018c] INFO UI CMAudioVideoToastViewController.mm/992:Cancelling
    local notification
    2013-12-20
    11:34:04.299 Lync[563:6d00000] INFO UTILITIES CHttpStreamPool.cpp/609:Releasing
    stream 0x125fa90.
    2013-12-20
    11:34:04.300 Lync[563:3a71018c] INFO UI CMRootViewController.mm/378:ActualState
    = 0 DesiredState = 2  DataAvailable = 0
    2013-12-20
    11:34:04.300 Lync[563:3a71018c] INFO UI
    CMDetailViewController.mm/229:ActualState = 0 DesiredState = 1  DataAvailable = 0
    2013-12-20
    11:34:04.300 Lync[563:3a71018c] INFO UI CMDetailViewController.mm/262:ActualState
    = IsSignedOut DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
    CredentialTableViewController
    2013-12-20
    11:34:04.300 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
    view is alert, size 1
    2013-12-20
    11:34:04.301 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/745:adding the
    desired view
    2013-12-20
    11:34:04.302 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
    floating views
    2013-12-20
    11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
    is 1
    2013-12-20
    11:34:04.302 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
    is 0
    2013-12-20
    11:34:04.302 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
    0x22020005, context = , type = 201
    2013-12-20 11:34:04.303 Lync[563:3a71018c] INFO UI
    CMUIUtil.mm/1680:Mapped error message is 'Non riesco a connettermi al server
    perché potrebbe essere occupato o temporaneamente non disponibile. Riprova.
    2013-12-20
    11:34:04.304 Lync[563:3a71018c] ERROR UI
    CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
    45.000000, x 64.000000, y 0.000000
    2013-12-20
    11:34:04.304 Lync[563:3a71018c] INFO UI
    CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
    height 1024.000000, width 45.000000
    2013-12-20
    11:34:04.304 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
    alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
    936.000000
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] ERROR UI CMDismissButtonBaseViewController.mm/104:after:
    self.label.frame height 41.000000, width 936.000000, x 44.000000, y 2.000000
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.305 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
    view is alert, size 1
    2013-12-20
    11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
    view is same as the current view
    2013-12-20
    11:34:04.306 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
    floating views
    2013-12-20
    11:34:04.306 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
    is 0
    2013-12-20
    11:34:04.306 Lync[563:3a71018c] ERROR UI
    CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
    45.000000, x 64.000000, y 0.000000
    2013-12-20
    11:34:04.307 Lync[563:3a71018c] INFO UI
    CMNotificationManager.mm/1089:viewFrame: origin x 64.000000, origin y 0.000000,
    height 1024.000000, width 45.000000
    2013-12-20
    11:34:04.307 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
    alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
    936.000000
    2013-12-20
    11:34:04.307 Lync[563:3a71018c] ERROR UI
    CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
    41.000000, width 936.000000, x 44.000000, y 2.000000
    2013-12-20
    11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.337 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
    view is alert, size 1
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
    view is same as the current view
    2013-12-20
    11:34:04.338 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
    floating views
    2013-12-20
    11:34:04.339 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert is
    0
    2013-12-20
    11:34:04.339 Lync[563:3a71018c] ERROR UI
    CMDismissButtonBaseViewController.mm/89:before: view height 1024.000000, width
    45.000000, x 64.000000, y 0.000000
    2013-12-20
    11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1089:viewFrame:
    origin x 64.000000, origin y 0.000000, height 1024.000000, width 45.000000
    2013-12-20
    11:34:04.339 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/1195:resize
    alert label, origin x 44.000000, origin y 2.000000, height 41.000000, width
    936.000000
    2013-12-20
    11:34:04.339 Lync[563:3a71018c] ERROR UI
    CMDismissButtonBaseViewController.mm/104:after: self.label.frame height
    41.000000, width 936.000000, x 44.000000, y 2.000000
    2013-12-20
    11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
    Pane is in Full screen with controller
    2013-12-20
    11:34:04.340 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
    frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
    = 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
    0.000000
    2013-12-20
    11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/162:Details
    Pane is in Full screen with controller
    2013-12-20
    11:34:04.341 Lync[563:3a71018c] INFO UI CMSplitViewController.mm/204:Split view
    frame orientation UIInterfaceOrientationLandscapeLeft Height = 748.000000 Width
    = 1024.000000 origin.x = 20.000000 origin.y = 0.000000 keyboardHeight =
    0.000000
    2013-12-20
    11:34:04.343 Lync[563:3a71018c] INFO UI
    CMToolsViewController.mm/349:ActualState = 0 DesiredState = 1  DataAvailable = 0
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI
    CMAlertViewController.mm/93:ObservableListItem Added event received
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/103:showalert
    is 1
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.344 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMConversationCommon.mm/43:not signed
    in
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/705:desired
    view is alert, size 1
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/718:desired
    view is same as the current view
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMNotificationManager.mm/480:reposition
    floating views
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/110:showalert
    is 1
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMAlertViewController.mm/114:showalert
    is 0
    2013-12-20
    11:34:04.345 Lync[563:3a71018c] INFO UI CMUIUtil.mm/402:Mapping error code =
    0x22020005, context = , type = 201
    2013-12-20
    11:34:04.346 Lync[563:3a71018c] INFO UI CMUIUtil.mm/1680:Mapped error message
    is ‘Cannot connect to the server because it could be busy or temporarily
    unavailable. Retry.’

    Hi Kent,
    thanks a lot for your reply!
    I created  _sip._tls.domain-ext.com SRV record in the external DNS and now autodiscovery works fine. At the beginning I had not created it because I thought lyncdiscover.domain-ext.com A record was enough for autodiscovery. I still cannot understand
    why lyncdiscover.domain-ext.com points to reverse proxy, while _sip._tls.domain-ext.com points to Edge server. It's strange because both are part of the research order of Lync 2013 desktop clients.
    By the way, mobility still does not work. I tried to insert bot the https URLs as manual configuration but Lync 2013 for iPad was not be able to login. I tried to paste both the URLs in the web browser and:
    with https://<ExtwebFQDN>/Autodiscover/autodiscoverservice.svc/Root appears the "Root.json" file to be downloaded;
    with https://<IntwebFQDN>/AutoDiscover/AutoDiscover.svc/Root
    the message "500-Internal error of server" appears.
    Any suggests from you about how to check the configuration of ISS/ARR 2.5?
    Thanks again!

  • Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

    Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

    Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

  • Audigy 4 - Vista drivers and software urgently nee

    you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
    . Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
    i mean... 6 mar. 07
    how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
    i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
    i need all that software. all of it, working under vista. PRONTO!
    you will provide that software, or you just lost me as a customer, and along with me, alot more.
    btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
    just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.

    http://forums.creative.com/showthread.php?

  • Creative Audigy lack of specifics and vaguen

    First of all, let me just say that i've never known a hardware card maker that can be so popular
    while at the same time be some of the most incredibly vague people on the planet. Its absolutely
    amazing. Case example:
    Exhibit A. I'm a computer tech and I come
    across an Audigy card in computer that i'm
    fixing so I need the *correct* drivers.
    Exhibit B. I have an Audigy cd-rom disk from apreviously owned card. I try to install the driverbut they're obviously incorrect but ALAS! the
    cd-rom i'm holding say its for an Audigy.
    Exhibit C. The drivers don't work correctlyso I check my windows Control Panel to seeif theres a way to *specifically" identifyit but the only thing it says is "Sound BlasterAudigy". Lovely. So, which brand could it be?
    Exhibit D. Ok, I need the correct drivers fora *specific* Audigy brand and I go to the Creativewebsite to do a search for Audigy drivers. Whatdo I find? About 0 different Audigy cards. Great.Here we go with the lack of specifics and vagueness....
    Exhibit E. So I proceed to take the card out ofthe computer and look at the model number toidentify it. It says "Soundblaster Audigy Model SB0090" and below that it also says"Audigy SB394 Advanced HD". So i'm thinkinghmmmm could this be an SB0090 or an SB394 butI soon find out its an SB0090 because an SB394is a "Firewire chip", which leads me to....
    Exhibit F. I find a link on the Creative websitethe says "Identify your product" and behold Ifind the SB0090 listed but its only listed as "Sound Blaster Audigy card with gold jack connectorand 394 port"..... so its off to the loony bin again.Again, which brand Creative? Still theres 0 differentbrands and still no way to specifically identify it!
    Exhibit G. Maybe I can tell by looking atthe pictures of the products provided on thewebsite. What do I find? Several differentcards that all look the same! They have the "gold jack connectors and 394 port" aswell as the "Advanced HD".
    So what is it's A "Gamer"? An "LS"? A "Platinum"or could it be an Audigy 2? WAKE UP CREATIVE,YOUR SOOOO VAGUE! Heres proof in summary:
    . Windows Control Panel - "Sound Blaster Audigy"But which brand?
    2. On the card itself - says "Sound Blaster AudigyModel SB0090".... but leads to nowhere becauseCreative's "Identify Your Product" only says:
    3. "gold jack connectors 394" but theresmore than one brand (Firewire) that look the
    same in the pictures!
    And here I am still with an unknown "Audigy" brand and no drivers that I can be sure willcorrectly work. Amazing, because if I were the owner of this card instead of the computertech, i'd probably throw your "Audigy" in the garbage (but i'd probably hit it with a sledgehammer a few times first).Message Edited by ZauR on 2-04-2004 09:55 PM

    ZauR,
    The Audigy downloads are listed by the packages that they came in. This was done to insure that customers that purchased a specific type of card (say an Audigy Gamer) would know that they were going to the right place. The driver pages for all but the LS is the same. So it isn't really a case of being vague, we are actually being rather specific (as a single listing for "Audigy" would be vague). Since there was never a retail package that was just an "Audigy" there is no listing like that.
    For the SB0090, I would suggest going to the Audigy Gamer download page (it is what I use for my SB0090) but really any of the pages except for the LS will work. The Audigy LS is the only Audigy card that requires different drivers and software.
    Jeremy

  • XiFi and Audigy Take Over Input and Output from Bluetooth Head

    I am having trouble with my bluetooth headset when making phone calls in any VoIP application (Skype, Yahoo!). I usually use the headset as the input and output for my VoIP bits so I can move away from my desk, etc... First, it worked under XP with my Audigy no problem. I bought a XiFi and installed the latest drivers and it began stealing my audio. Oddly, it does not do it until the call connection is made (so I hear the ringing in the BT headset and once the call is answered the system reverts to the mic, a Logitech USB, and main speakers, directly plugged to the soundcard).
    I decided to put my audigy back in, because I was planning on upgrading to Vista and thought the XiFi may be bad. I did a fresh Vista install with the Audigy and everything worked (i.e. audio for phone calls stayed in my BT headset). I then upgraded from the Microsoft drivers to Creative?s Vista drivers and the problem then happened with the Audigy as well.
    This leads me to believe that some sort of regression happened in the latest drivers. Everything else works great, games, movies, etc? but this is a show stopper because I want to use my bluetooth headset. I tried to downgrade to the Microsoft drivers but the card would no longer work. I have tried a driver install only, then added the software, removed that and did a full install. This is with BETA drivers on Vista, but the problem existed in XP as well which were not BETA drivers AFAIK. I have updated to the latest Bluetooth drivers as well with no luck.
    I have confirmed this on two of my PCs and a friend of mine is having the same problem (XP, XiFi) so he went and bought a Skype phone which works correctly.
    Thanks in advance

    thanks for reply..
    Please help me out with the entire setp by step procedure that i have to follow in getting the output in variable
    i am using to get the emp name from webservices and i am passing empno from form.
    INPUT STRING
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:tem="http://tempuri.org/">
       <soapenv:Header/>
       <soapenv:Body>
          <tem:ALL_GetEmpNamefrmID>
             <!--Optional:-->
             tem:EmployeeLogin>{$ /process_data/@emp_no $}</tem:EmployeeLogin>
          </tem:ALL_GetEmpNamefrmID>
       </soapenv:Body>
    </soapenv:Envelope>
    when i hard coded emp no for testing EG: 1234 the out put i am getting the folloeing XML when i click tes
    OUTPUT:
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
       <soap:Body>
          <ALL_GetEmpNamefrmIDResponse xmlns="http://tempuri.org/">
             <ALL_GetEmpNamefrmIDResult>SUBBA</ALL_GetEmpNamefrmIDResult>
          </ALL_GetEmpNamefrmIDResponse>
       </soap:Body>
    </soap:Envelope>
    Please help me out what are the steps i have to follow for getting out put SUBBA to my variable

  • X-FI and BF2 doesn't work like it sho

    After many hours of trial and error, i drop this post here:
    I can't switch in BF2 to "Creative X-FI" in the sound settings. "Your sound hardware is not compatible, blabla...". I deinstalled BF2, installed it again. I deinstalled the X-FI-drivers and installed it again (and yes, i used for new installing the driver, that i get on the Creative-webpage". Always the same. WTF is going on? Has anyone the same problem?

    Can we get a solid answer to the correct settings for BF2 and X-FI cards?
    Which settings should we use for which cards? X-ram or not?
    Hardware or X-Fi High or Ultra?
    I have found no answer at all from anyone from Creative or EA.
    Here they make a game that supports this new card coming out, we go get it yet no one can tell us which settings to use for this card.
    Many are saying X-Fi option is only for X-ram cards and many say X-FI options is for all X-Fi cards?
    Pls PLS, can someone from Creative answer this?

  • Audigy 2 zs distorted and cracking so

    hi..
    I have audigy 2 zs platinum pro with gigaworks s750 speakers when I'm playing games and listen to MP3 music I get a lot of distorted and crack I just can get a clear sound try the newest driver but still all the same anyone can help.....

    I think maybe you have your mic recording set on acti've. Go into windows control panel and double click the speaker icon/audio device settings. Click the audio tab on top, and then select volume in the "sound recording" section. Make sure that "Microphone" is not selected.

Maybe you are looking for

  • Partner application configuration is missing error on SSO login page

    We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner a

  • UpDating Lightroom 2.5 to 2.7

    I ran into a problem and am wondering if any body else has had this problem,when I updated lightroom 2.5 to 2.7 I lost all my files and Lightroom 2.7 showed  my catolog as no fotos at all , I then needed to spend a whole day locating and reloading th

  • Forum Point Status ...

    Hi Fellow ABAPers, I have been asked to link to the Forum Points Status ... there. In general if you would like to know what people are thinking about the activities in the forum there is always a lively discussion going on there about it. As far as

  • Black Line at the bottom of the page

    Hello Everybody, I have a strange problem, I have a pages file, and there is a black line at the end of the page and I could not delete it. the file was .doc and i opened it by pages then saved a pages version. what can I do to remove this strange li

  • Stop pinging of site on 9i

    I am running my site www.abc.com(suppose) on 9iAS. How i can avoid it to be slowed down against "ping www.abc.com". Should i use a firewall? If yes, which firewall is better? Great26