Audigy PRO 4 , failing with direct so
HI i have the audigy pro4 system , with the latest updates from creative i regualrly use teamspeak and in the recent week i've lost input , i can still hear and have sound but but mic stops working, this is due to direct sound failure apparently. Now its happened again and all i did last time was uninstall drivers etc and re-installed then it worked, but i dont want to keep doing this , what is going wrong any ideas?
on ventrilo i also got this error message ,
Directsoundcapturecreate Failed,hr=88780078
so now my input(mic) is not working again and im fed up .plzzzzzzzz any help would be grateully appreciated!
Im running xp pro
amd venice 3000+
2gb ram
x850xt vid
audigy pro 4 sound systemMessage Edited by Spider on 09-0-2006 05:25 PM
>Learn the M audio!!!! <
I KNEW IT!!! LOL!
I just KNEW someone was going to say that. Yeah, $400 and a year later it is sitting in a drawer. I don't have the time. The "manual" is even worse than Creative's "user guide". It is assumed if you spend $400 you have a clue. I'm a Guitarist! Not a keyboard player. We walk into the studio, plug in, play our parts, get paid, then go out for pizza.
It took me long enough to figure out Acid, Waves plug-ins and T-Racks before I finally had some quality production values. I can't speed another year learning M-Audio's firewire "controls".
Come on. Someone must know what is up with the "value".
Do I need to reinstall the drivers? What?
Similar Messages
-
Install Acrobat Pro 11 fails with error message 1310
Need help fixing error message 1310 when installing Acrobat Pro 11
Newdayresources please try the steps listed in Error "1310: Error writing to file: C:Config.Msi..." | CS4 products to resolve error 1310.
-
PSQ Import in Premiere Pro CC fails
Hello,
I noticed that PSQ (Adobe Premiere 6 Storyboard) file import in Premiere Pro CC fails with a General Importer Error, although it's officially supported as stated in the manual (http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html). Import in CS6 works without problems. I already submitted a bug report.
Since I'm using this feature quite a lot - it'd be great to have this working again asap.
Can you please help and fix this?
Thanks a lot!Hi Jack,
Please check the below Forum thread and roll back to the Initial version 7.0 of Premiere Pro CC. You can choose to update Premiere Pro CC to the desired version from the below links.
http://forums.adobe.com/message/5827476
Updates:
For MAC:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Macintosh
For Windows:
http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
Regards,
Vinay -
Help -- Getting my Audigy Pro 4 RM-1500 working in windows 7 X64
@Help -- Getting my Audigy Pro 4 RM-500 working in windows 7 X64. To anyone who can help
?I used the latest version of daniel_k's most excellent drivers to install?my Audigy Pro 4 ?(with external box) on a Windows 7 X64 operating system and all the audio devices I have tested so far have worked great.
However, I can't seem to get the rm-500 remote working. I have installed the lasted (0/30) version of mediasouce5;? and the drivers for my remote do not seem to be included.
The closest I can come is the beta version of the vista entertainment center which does install a remote control settings configuator. However, it doesn't seem to recognice the Audigy Pro 4's version of the rm-500, even though it is listed as an option. I get a "can't find an ir device" error.
Any suggestions for me as to how I can get it working, if it all?
Much Thanks!
JackalopeD When I was beta testing Windows 7, I had the same problem with my remote for X-Fi Platinum Fatalty Champion. I discovered a program called Intelliremote (just Google it) that worked great. It works with Creative remotes. I found for some reason the beta driver of entertainment center, in compatibility mode, works with the final version of Win 7. I hope this hel
ps. -
My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?
I tried last week. The best I could get was a discount on the repair, but the damage to my logic board by the GPU caused it to no longer boot. The program ended in December last year, but it has been extended in the past.
If you have no other damage you might be able to get a flat rate tier 1 repair if you are in the USA. -
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Hello, i use premiere pro cc and i would like to upload my sequence in speedgrade with direct link but it's not available. I can see the option but it's not clickable, somebody knows why ?
Oh i'm not sure they are on same, i downloaded speedgrade this morning and i didn't upgraded premiere so it's maybe this ! thanks i will try it and let you know
-
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
I've only been using Premiere for a single project as my university specified we should use it, I'm not used to such a complex programme, or even video editing to be honest, so bear with me. (I'm following that guide on what information to add to questions on this forum)
I'm using Premiere Pro CC with the 7.2.1 update, that's the most recent update
I'm on Windows 7
Version
6.1.7601 Service Pack 1 Build 7601
I'm not actually sure what a codec is but my source material is just one .jpg image, I put effects on it in one project then imported it to another project though
Here's the problem message
Problem Event Name:
APPCRASH
Application Name:
Adobe Premiere Pro.exe
Application Version:
7.2.1.4
Application Timestamp:
52aed7f3
Fault Module Name:
OpenCL.dll
Fault Module Version:
1.2.11.0
Fault Module Timestamp:
52a242a8
Exception Code:
c0000005
Exception Offset:
0000000000002b89
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
2057
Additional Information 1:
5273
Additional Information 2:
52739eafd9c00fbd41b66266050284b2
Additional Information 3:
750c
Additional Information 4:
750c2263c4fb3446348e7454d5714618
Computer:
Processor
Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, 3501 Mhz, 4 Core(s), 8 Logical Processor(s)
I THINK I have a AMD Radeon HD 7870 which isn't supposed to be supported for GPU acceleration
Premier crashes when it gets to the point in my sequence where I used the directional blur effect (I'm pretty sure that's when it crashes anyway), it also can't export I assume because it can't render
this is like 4 seonds of video as well
I reaaaaally need it to work soon because I have university deadlines to meet and I need Premiere Pro to finish my work
Hope someone can give some adviceI tried it without the directional blur effect and it rendered fine, for some reason it just can't deal with directional blur...
-
Acrobat XI Pro fails with a fall back error on Win 7 and 8
I have been trying for a month to install acrobat XI pro on both win 7 & 8 machines with no success. They get to within 5 sec of finishing and fail with no error code just a message the something interrupted the installation and it was performing a roll back. I have tried this on a new machine with no adobe products installed as well as a machine I am upgrading from Acrobat x pro to Acrobat XI pro.
I have spent hours on the phone with Adobe with no solution, I have searched the Internet and find many people experiencing the same problem but nowhere is there a solution.
I need the product for business and am about at whit's end. Can anyone help? Is there a solution?
Thank you in advance for any assistance you can provide.I and many other people have successfully installed in Win 7 and Win 8 without issue, so something specific with your system is the cause. Run the Acrobat cleaner to remove anything left over from previous attempts.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
Then make sure that all extraneous software is turned off. No virus or spyware protection, nothing running in the background that you don't need to have running. I haven't tried in Windows 8, but in Windows 7:
click on the start menu
in the Search panel type: msconfig
See if you can install during a Safe boot. If something is necessary for installation that is not available during a Safe boot,
then look Startup Processes and turn off what you can, reboot and try again. -
Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.
-
Summary
Can't print PDF files from Adobe Acrobat Pro 9.3.0 on Mac OS X Snow Leopard (10.6.2) to Brother MFC-7820N Printer (connected via USB). Print queue consistently shows "pstopdffilter/pstocupsraster failed with err number 13".
Steps to reproduce
Launch Acrobat Pro 9.3.0 on Mac OS X Snow Leopard 10.6.2
Open SimpleOnePageDocument.pdf (attached)
From File menu select Print
From Print Dialog select Brother MFC-7820N printer
Click Print Button
Results
Printing immediately fails. Print queue shows "pstopdffilter/pstocupsraster failed with err number 13" (see attached picture)
Expected Results
Document prints
Things I have tried
Downloading latest drivers from Brother for Snow Leopard (fall 2009 drivers)
System Preferences->Print and Fax->Reset Printing Subsystem
Print->Advanced->Postscript Options->Font and Resource Policy - Greyed out so I could not change from Send by Range to Send for each page
Notes
I can print PDF files from the Preview application without any problems.
System Info
Operating System
Mac OS X Snow Leopard 10.6.2
Product
Adobe Acrobat Pro 9.3.0 (installed as part of CS4)
Printer
Brother MFC-7820N connected via USB
Printer Driver
Brother MFC-7820N CUPS version 1.41I have exactly the same problem since I changed my Mac for an Intel one (10.6.2 instead of Power PC 10.4).
My printer is a Canon MP610 but this has nothing to do with the printer and it's software. Adobe seems to be completely deaf to this issue which is very annoying as most of the downloaded documents you need to print are pdf nowadays.
I surrounded the issue by copying/pasting the pdf image in a jpeg file... This is very time consuming and I'm still waiting for a proper answer to this bug by Adobe.
Let's continue to write, hoping Adobe will begin to move on the subject... -
Updates fail with error 1328 I have re-installed XI Pro twice without problems.
2
William D. Burstow, CPG, QP
Consulting Economic Geologist
Tel: 541.573.1078
Email: <mailto:[email protected]> [email protected] -
Update 10.8.2 from 10.8.1 fails with MacBook Pro
Need some help! Trying to update 10.8.2 from 10.8.1 on MacBook Pro (13 in with Retina display) and somehow it fails. Any ideas?
Your wait was over yesterday. First you will need to install the OS X Mountain Lion Update v10.8.2 (Combo), then install the new OS X Mountain Lion 10.8.2 Supplemental Update 2.0.
-
Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567
Maybe you are looking for
-
How do I get my pro-rata subscription back after cancelling it?
I subscribed to CC Photography plan towards the end of last year and because I wasn't using the products much at all decided to cancel the membership. That in itself was easily done online and I was promised an email from Support in 2-3 business days
-
Help i need a case for my macbook anybody know any sites?
i need a case would prefer a rubberized one for my macbook? its 2010 so the macbook pro cases wont fit? i carnt seem to find any for the normal macbook any1 know any sites
-
upgraded from 3.6 to 8.01 and the addon button doesn't work. When I upgraded first time nothing worked at all...back to 3.6. Oh, tabs won't work...
-
hallow i have to a log for pa and in table fields i have the fields that have change lets say i have lot of employee and i wont to take one employee and check if hire (massn = a1 ) what is the best way to take employee and bring all the field yhat ch
-
CAD VIEW Error : "Status can only be set when all originals are stored"
Hi Friends, I have Proe to SAP integrated and when I open Proe model in CAD VIEW and try to create a document it shows an error "Status can only be set when all originals are stored" Also I see that the model is not having Status in CAD VIEW. When I