Audio (and some video) dropping out export

I've created an project with short video/audio clips sampled to produce "music". It plays OK in FCPX, but when I export it (H.264, 720p, Apple Devices, 44.1) as an MP4, some of the audio (and some video) drops out. That is, it does not show up in the exported (aka "Shared") movie file.
There are about 7-8 things (tracks) going on at once, maximum.
Any ideas what to do to fix this?
Thanks!

Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"

Similar Messages

  • Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

    The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
    The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
    There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
    BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted.  The only problem is with Lollipop.
    PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
    The audio file formats which fail to stream are:  mp3 and wav
    The video file formats which fail to stream are:  mp4, avi and 3gp
    JPEG Images appear to work fine, but I haven't tried other formats.
    I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
    Any ideas?

    Hi juicespeare1,
    Welcome to the Sony Community!
    Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
    You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
    If my post answers your question, please mark it as "Accept as Solution"

  • IMovie Loses Audio and some clips are out of focus!!!

    When I import my footage into iMovie, it loses it's Audio, and becomes blurry on certain clips. Anyone help?

    Hi, Clay. Photoshop.com has its own forum, so you might want to post this there:
    http://forums.adobe.com/community/photoshopdotcom

  • DC111 - XBMC WIFI and Audio,Video drop outs

    Hi
    I'm using Linux XBMC on DC111. I found some issue when I'm playing movie, form time to time I have audio and video drop outs, but it's only appears when the WiFi card is on. But when I disable the WiFi by software (rfkill) the drop out disappeared. I found this one solution on web but there wasn't any explanation. Any suggestion it's hardware or software problem?
    Thanks.

    Hello @WBHNYC,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post (serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

  • Changed TV out to off but ipod still only plays audio and no video

    Just recently my ipod decided not to play video. All the videos in the video folders are gone and now appear in the music folder. Even the video podcasts no longer appear in the video podcast folder. I have changed the TV to out to off and still it continues to do the same thing. I am not sure what happened, I don't believe I changed any settings or anything. I would hate to reset the ipod and lose everything. Need help, thanks.
    Compaq Presario 1500   Windows XP   2 ghz 256 mb ram laptop

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • I am using MTS files.  They load in PE fine. The problem is when I try to play them, I just get audio and no video.  I have installed the latest updates.  Is there a CODEX that I need.

    I have windows 8.1.  I have downloaded the mts files from my video camera onto my hard drive.  I have loaded a subset of these mts files into premier elements and they show up fine.  I can bring them to the time line without a problem.  The issue is that when I click on them, I only get the audio and no video.  Normally when you click a thumbnail, the picture shows in the large screen.  That screen remains blank.

    John - thanks for your response
    1. Graphics Adapter:  Nvidia GeForce GTX 650
    2. My driver before you response was 3/4/14   9.18.13.3523.  I went to Nvidia and downloaded and installed latest driver 7/2/14  9.18.13.4052
    3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
    4. Some things I have done to try to resolve the problem.
         a. Searched this forum for a similar problem.  I didn't see one.
         b. Did a web search to see if I could find a solution outside this forum
         c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
         d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
    5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me.  I said yes and here I am.   I seem so close to making it work.   Thanks

  • Downloaded a movie (mpeg-4) from youtube and I only have audio and no video.  it plays on another pc but not this one.  please help.

    Hi,
    I downloaded the latest free version of quicktime.  I am trying to play a movie (mpeg-4) that was downloaded from youtube.  It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.  Can anyone offer some suggestions please?  I need to play it on thislaptop computer as I require it for a school presentation.  Thank you.

    It plays fine on my other pc, but I only get audio and no video when I open it on this pc. It shows up like static lines on a tv that has bad reception.
    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

  • Streaming audio and/or video crashes your router BEFW11s4 firmware problem

    Ok!!! Apparently some of us have had the problem where trying to stream audio and/or video can cause the Linsys BEFW11S4 to crash, where only a power down and re-up will retore communication. Changing the MTU size has been suggested ad-nausium. I hope this works for you all, because it worked for me.
    Apparently the latest firmware is the problem. I just installed an older firmware version and problem solved (1.50.14).
    ftp://ftp.linksys.com/pub/network/befw11s4_v4_v1.50.14_code.bin
    So, looks like maybe Linksys could hopefully issue another firmware update that fixes this (we hate having to use old firmware... trading off one bug fix for other multiple bugs that may rear their ugly head later on).
    list of bugfix history found here:
    http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=text%2Fplain&blobheadervalue2=inline%3B+filename%3Dbefw11s4_v4_v1.52.02_ver.txt&blobkey=id&blobtable=MungoBlobs&blobwhere=1130824460891&ssbinary=true

    Hi all -
    This looks like this will fix the issue I have with my router. I'm willing to try it, anyway.
    My question is pretty basic: What do I do after I download the file?
    Thanks, Kate

  • Merging one Audio and one Video into one file.

    Hi guys,
    I have one audio and one video file, related to same issue.
    I want to merge it using Java.
    Please help me to solve this out.
    Thanking you all in advance.
    Regards,
    Lovelesh.

    check out FMJ:
    http://fmj-sf.net/

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I am trying to make a documentary on my life using scanned photos and some video. Help please

    I am trying to make a documentary of my life using scanned photos and some video imported via disc from original cinefilm. I am having difficulty getting this sorted as I tried to import a whole event from aperture in which I had sorted the photos chronilogically. So it seems to have gone in as a project without an event which seems to be making life difficult. also I am having difficulty editing the imported video. any suggestions please.

    Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
    (86384)

  • Hidding the floating toolbar that apears when sharing audio and/or video

    Hello everyone!
    I'd like to know if is it possible to remove(or hide) the floating toolbar that appears when sharing audio and/or video on firefox.
    I am attaching an image of what I want to hide.
    Thanks in advance,
    Ibrahim

    Sorry...
    The attachment didn't work the first time...

  • Audio and some other devices not working on compaq mini NOTEBOOK

     A certain PCI device failed to install on my system. my pc cannot detect it and i think this has affected the audio and some other vital devices like battery meter, and ajusting the brigtness of the screen. i want to know if the device can be uninstalled and have some other drivers that will make the pc to work normally. The system also refuses to go on hibernation
    Recent changes: i installed a PDF fill writer software which i have uninstalled
    Name of product: Compaq mini  notebook with serial number CNC0472C51
    PRODUCT NUMBER: XE979EA
    OPERATING SYSTEM- WINDOWS 7 32 -BIT

    Thanks to edgmiw for the solution:
    edgmiw wrote:
    Run system update and make sure all your Thinkvantage utilities and drivers are installed properly.

  • I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer.  Pc now says waiting for mac to connect and has is stuck at transferring information.  How do I get the process to continue?

    I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. I started up migration assistant on the Pc again and now says waiting for mac to connect! New MacBook Air  is stuck at transferring information.  How do I get the process to reconnect and continue?

    Whew, good luck!
    What version of OSX is on the older one?

Maybe you are looking for

  • When i plug in my iPod nano, it doesnt come up in iTunes. It is a file.

    When i plug in my iPod nano, it doesnt come up in iTunes. It comes up as a file. It wont show up on iTunes. What can I do to fix this?   Windows XP  

  • File to ABAP Proxy(ProductActivityNotification_In)

    Hi All I have to develop one scenario for Flat File to ABAP Proxy (ProductActivityNotification_In). I am going to use Receiver File Adapter(to receive file in PI) and Reiver XI adapter(to send file to SNC proxy ProductActivityNotification_In) I am ne

  • BI 4.0 server and client apps coexistence

    Hi SAP experts, we have installed BI 4.0 SP02 FP03 (Win 2008) for one of our customer with AS JAVA Netweaver 7.3 (Linux) application server. Customer is now requesting to install the BI 4.0 SP02 FP03 client tools and rich clients on the server where

  • PS CS5 on my Macbook

    I just got a Macbook Pro and downloaded CS5 (the version I already own on my mac desktop) Everything seemed great until I tried to open RAW files from my camera. It says it does not recognize the format of the files.  I updated everything and tried a

  • IWeb won't connect to godaddy

    I just made a domain through GoDaddy, I followed their instructions on how to publish using iWeb - but the connection keeps failing. I read somewhere that I need a Web Hosting Domaine to do this. What does that mean? Why would I have a domain name wi