Audio coming in on wrong track

I am new to Adobe, using CS5 on a win7 64 bit machine. I was working on a sequence with 4 tracks. Everything was working fine then suddenly the audio for the video that I was dropping on my timeline trac 1 started coming into the sequence on a new audio track 5. It was not dropping in on audio track 1 and the program automatically created audio track 5. Audio track 1 is not locked. Anybody have any idea what happened? I'm thinking I probably did something to cause this but have no idea what.

This FAQ entry gives context and tips on dealing with this:
http://forums.adobe.com/message/3804421

Similar Messages

How can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)

It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

Audio coming from only one field

Hello,
I just did a mic'ed interview with my little camera. I was wearing headphones and noticed audio coming from only the left side, but there was nothing I could do about it that I was aware of.
Anyway, now that this thing is in Final Cut Express, is there anything I can do to apply the left track to the right track? Or would this make it sound funky or how does it work?
Thanks very much,
Jeremy

Ah, I see. I just used 'Pan' and set it from -1 to 0. Cool.
This can be deleted or left for reference, I don't care.

When I press 'Low Latency' button I only have audio coming through left channel ?!

When I press 'Low Latency' button I only have audio coming through left channel !?
When you take it off 'Low Latency' mode the audio is fine and comes out Right and Left speaker.
Can anyone please advise why this happening and how I can fix it ?

I think Pancenter is trying to get you to read and understand the "Working in Low Latency" section of the manual as the results or problems with working in Low Latency mode are variable.
This section, for instance:
Note: The sound may change in Low Latency mode. Depending on the plug-ins in use, the changes can be anything from subtle to dramatic. If plug-ins being used do not exceed the total latency limit, there will be no audible difference.
If it was me posting about this issue I would now come back with what exactly is inserted/bussed on the tracks because it could be an accumulative problem based on what plug-ins you have active and if they are on audio tracks (stereo or mono), instrument tracks etc. Lots of variables. The section of the manual quoted above won't give specific instances as any user could be using any combination of any amount of plug-ins.
So more information is needed before anyone can help you any further.

Audio and Midi Jumping/Swithching Tracks in Arrange Window

I've had an issue with audio and Midi information switching tracks in the arrange window. Granted, I'm new with Logic. But as I'm working in an audio Track (let's say track 3), I happen to undo a record pass or delete something, and the next thing I know, all the tracks have jumped up one -- so the Midi drums in track 10 are in nine, playing the piano insert. The Midi Piano is up in 8 doing nothing (because track 8 is an audio track), etc. etc. etc. Very annoying -- even when the tracks are frozen.
Any comments or suggestions would be appreciated.
Thanks

I've had this happen in the past.
What version of Logic are you working on?

After the recent upgrade to ios 8 ipad air has no audio coming out

HI
After the recent upgrade to ios 8 ipad air has no audio coming out

I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.

Is there a way to see the waveform of the audio in the primary video track?

Is there a way to see the audio waveform of the audio in the video (primary) track?
Scrubbing to determine precise edit points is useful, but seeing the dialog audio waveform would be much better.
You can see the audio waveform in additional audio-only tracks, but for cutting to dialog you really need to see the primary audio waveform that's in the video track.
Any thoughts?

msimpson,
No. The waveforms are only visible in the two separate audio tracks.
A work around would be to use Advanced>Extract Audio command.
This command, in spite of its name, copies the audio to one of the audio tracks and sets the volume level of the audio to zero in the video track.
Now you'll have the waveform to use in editing. When you're done with it, you could delete it and raise the volume again on the video track.
Matt

HT201441 how can i create and audio cd from a music track I have on my ipod

how can i create and audio cd from a music track I have on my ipod

This is how:
Go to:
'File'
'Share'
'Quicktime'
'Expert Settings'
'Audio as AIFF' or pick your brand of compression.
Drag and drop the resulting file into iTunes.
Enjoy!
P.S. - You didn't need to delete the video but I think that'll be okay.

Remote control plays wrong track!?

hi, i have set up a DVD with four buttons playing 4 tracks, each of which has 1 chapter (or clip) and returns to the menu after playing. after i've burned the DVD and placed it into the DVD player, pressing the numbers 1 through 4 however causes the wrong tracks to play: for example pressing "1" plays track 1, pressing "2" plays track 3, "3" plays track 4, and "4" plays track 2!
I originally had the tracks arranged differently, where in the menu button 1 one was actually playing track 4, for example. but when i noticed this problem i went back and set it up so that track one contains clip 1, 2 contains 2 etc. hoping the problem had something to do with that.
it did not solve the problem...
can anyone tell me what i am missing here? i simpy want to have each corresponding track play accordingly when i click its number on my remote...
thx in advance for any help!
frank

so the final question then is are all the assets in different tracks, and if so, what order are they in when you look in the outline view (top to bottom)?
ok, in outline view all tracks align (1-4) vertically, and each opens the appropriate asset in the track wiindow (bottom middle) when highlighted. so all seems logical right?
so i burned another one (fresh build - no recycled versions) and stuck it in the player - what happens? whn i am looking at the menu, and press "2" the dvd plays track 3... same problem, but check this out:
if i am watching one of the tracks (say 1) and i press number 2 on the remote the dvd jumps to track 2 (i.e. NOT 3) as it is supposed to... this works for all the other tracks also)
so it seems the incorrect jumping occurs only from the main menu.. though as far as i can tell that is clean. BTW this time i deactivated "auto assign" in the Menu> Settings pulldown before the build)
hmm

Wrong track order in ipod

My ipod has the wrong track order for at least three different albums of three different artists. Its only one song on each of the albums. All the album info is correct and in itunes the songs are all in the right order. I've restored the ipod twice to no avail. Any ideas

the only thing I can suggest is make sure your playlists are in the right order when syncing, so maybe have your albums in the right order when syncing? I know my purchased playlist is in whatever order I sorted it last...usually by play count. SO my most played song is at the top of that playlist. Maybe it works like that for albums too, so make sure the songs on the album are sorted by track #

1 Audio Interface IN to Multiple TRACKS

I don't know if this is possible but I sort of have it working.
I would like this device:
USB Audio Interface IN - Guitar
To record AND monitor to these tracks at the same time:
Track 1 - Guitar L1
Track 2 - Guitar L2
Track 3 - Guitar R1
Track 3 - Guitar R2
The problem:
I can monitor 2 tracks at a time but when I click on one of the other tracks only Track 1 continues to monitor and the focus of the monitoring of Track 2 for example would go to the Track # that I've clicked on.
Why?
I am doing this because I noticed if I apply the same Guitar Rig effects to all 4 tracks but tweak the EQ for each of the tracks from the Logic Pro X plugin I have a live studio quality guitar sound without having to record the tracks individually.
Is anyone doing this?? Maybe I need an audio aggregate? I'm afraid it's going to be a limitation to Logic Pro X.

Thanks, but this information is just for editing Volume, Pan, etc... but I need editing the takes.
Example:
1.- I have two tracks for the electric guitar:
- first track is clean and it's recording directly to the audio interface (for line)
- second track is drive and it's recording with a mic
2.- The recording in both tracks is in the same time.
3.- After that, I want to make differents attemps or audio takes (with the option punch)
4.- After that, I need to choose the best parts in the recording audio takes and I need make this task in the same time for the both tracks.
There is some option in Logic Pro X ?

Recording more than one audio region on the same track

When I record my audio, i set up one track, with loads of plugins to record my main vocals on. If i want more than one vocal sample to play together with the same eq, ill put them both on the same track but Logic wont allow this and will play the latest entering region and suddenly cut off the other one. Can anyone provide me with a solution as to how to deal with this? Thanks

copy your performance to a new audio track
in the channel strip of the original, you can copy the channel strip settings from the pull down menu and paste them into the new tracks channel strip

Multiple audio streams for 1 video track

Hi I have a few different sountracks I want to use with one video asset.
I want to avoid duplicating the video track and putting a version of the audio in it.
If I have an Audio tab in my menus with music and lyrics, one with instrumental only and a dolby 5.1 surrond
how do i target the buttons to choose different audio as i click on the 5.1 let's say, it will choose to play stream #3 5.1 surrond.
Been looking in the manual but could't find anything.
Any help is appreciated
thanx
jm

Sorry about the links -:(
Anyway follow these steps and it should work (one approach, not difficult to do, I just wrote the steps in small bites )
Press F3 Key so we are looking at the same layout in DVD SP
1.) Make a menu with two buttons, label them Audio A and Audio B
2.) Make a Track (the "TRACK")
3.) Place your video on the video portion of the TRACK
4.) Place your Audio A on A1 track and Audio B on the A2 track
5.) Drop a chapter marker at the end of the TRACK (one should be at the begininng of the track by default)
6.) Click Add Story from the top Bar for the TRACK
7.) Name that story Story A, add the first Chapter Marker to the Story
8.) In inspector for Story A deselect/remove check marks for all audio except for 1 (uncheck 2-7)
9.) Duplicate Story A as Story B
10.) In inspector for Story B deselect/remove check marks for all audio except for 2 (uncheck 1, 3-7)
11.) Set Button 1 from menu to Story A, Button 2 story B
Note that this method will not allow toggling between the audio. A quick way to permit toggling is to do as above, but have both Audios (1 & 2) checked in steps 8 & 10
Create a script called PRESTORYA and set it as a prescript for Story B, with the following:
Set System Stream AU(Audio Stream 1)
Create a script called PRESTORYB and set it as a prescript for Story B, with the following:
Set System Stream AU(Audio Stream 2)
FWIW the links worked just now (downloads a zip file directly to HD, take a look in activity window in Safari, maybe there for you?)

Audio recording on a MIDI track???

I have a midi drum track (software instrument track, Ultrabeat). I'm not sure how I did it, but apparently I recorded some audio on it as well, I probably recorded an audio track and had this track record enabled - still it's weird that to me to have audio contents in a midi track.
There is no audio region that shows up in the arrange mode.
How do I get rid of it?
Thanks.

I'm not sure what you mean by that,
maybe you have the Ultrabeat's sequencer on and when you press play in Logic the sequence you created in UB starts playing before the MIDI Region you have in the Arrange and that's confusing somehow.
It happens
I'll check your screenshot when you upload it later on
A

Premiere pro cs3 doesn't place audio into the corresponding video track

It places a video clip with audio in the Video 1 track, the audio is not automatically placed into Audio track 1 but it goes to Audio 2 or 3 or 4. I checked settings both Project and Preferences but have not clue what may cause this problem. Any help would be greately appreciated.
I have Premiere Pro CS3 running on Vista home premium. Thank you

FAQ:Why is there no audio in my imported MPEG file?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Audio coming in on wrong track

Similar Messages

Maybe you are looking for