Audio Controls not working from Control Center.  iOS 7  7.0.1

So my audio transport controls from control center don't work on my iphone 5C iOS 7.0.1
Works on my iPad 3rd Gen and iPhone 4S.

Me too. A complete restore didn't help at all, either. Doesn't control itunes, Pandora, nuthin.
Also, my bluetooth controls in my car don't work, though music WILL play via bluetooth. Can't control from the steering wheel anymore.

Similar Messages

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • Audio is not working

    I accidentally deleted IDT audio from the contol panel. Because of this, the audio is not working. Therefore, I tried downloading it again but my laptop responded with [error, declined, your computer does not reach the requirement ect] 
    Just to clarify I have a laptop windows 7 and I bought it for nearly 2 years now. 

    Hi 3la,  and welcome to the HP Forums! 
    I understand that you deleted your IDT audio from the control panel and now your audio is not working. I will try my best to help you with this problem. To better assist you, could you please tell me your model number of your laptop. Here is a guide for How Do I Find My Model Number or Product Number? In case you need it.
    I am including this document in hopes that it may help resolve your issue. 
    Using Recovery Manager to Restore Software and Drivers (Windows 7)
    Please let me know and I will be happy to help.
    Thank you and have a great day!
    I worked on behalf of HP.

  • X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!

    <X-Fi Audio - Subwoofer NOT working in Vista 32-bit Ultimate!I I have WIndows Vista 32-bit Ultimate and Sound Blaster X-Fi Audio installed and with the factory drivers (I tried another set earlier and they did not work, so I reinstalled the original drivers which worked, at least partially). Until now I only listened to music using my headphones, but I tried today to plug-in my 5. Genius system (50W RMS) and everything works fine EXCEPT the subwoofer does not produce any sound at all!! The ONLY way to make it work is go to Control Panel -> Sound -> Speakers -> press Configure and then click the Test button in the dialog that appears (or click the subwoofer icon to make it produce a very nice bass sound - which I absolutely love, but it's the only way to make my subwoofer work!!!). Please guys, help me find out what the problem is. All help is much appreciated. Thank you!

    cipriansk7 wrote:
    Thank you my friend,I have done as you have mentioned (made sure the DLL did not stay there when I rebooted before I installed your version), and now I have the version which you have built. However, I am still unable to hear the subwoofer I am so sad... even my default on-board card supports the 5. just great, and I love the sound of that, but I was hoping for something better from Creative - instead, all I got was a soundcard I can only use with my headphones at the moment because of a faulty driver...
    Did you enable Bass Redirection?
    Run Console Launcher, click on Speakers and Headphone -> choose 5. Speakers.
    Then click on Bass (Bass Management) and enable Bass Redirection.

  • My audio does not work...

    My audio does not work. it says it's enabled, the troubleshooting tools i've used (several) find no problems, and yes, I have the latest drivers.  When I start Windows Media Player, it says: 
    "Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
    If I click Start, Control Panel, Sound... nothing happens.  nothing.  No error message, no window starts.  Could it be my audio card failed?

      Ok, it takes 3+ days to back up 400+GB of data, wipe Windows, reinstall all my software and restore all my data.  All that drama is not worth repairing a sound card.  Besides, we need to fix this for real, not duplicate the conditions that caused it to fail in the first place.  In the future, it's best not to bring up that option at all.  (We both know that rarely solves the issue permanently.)
    I'd simply replace this so-so HP before I put myself in a position to lose 3 days of work.
    However, I am still interested in finding a solution to this problem.  Do you think HP is capable of solving this?  If so, I'll look for a more detailed model number when I get home.
    Thanks,
    Gary

  • External Task not working from job

    Hi,
    I am trying to call a batch file which copied fdr files from one folder to another and runs sarmanalyzer to generate csv files in the edq landing area.
    The batch file is working fine when called from command prompt or double clicked in the edq server, but does not work as expected when called from project or job.
    I generated a log file which confirms that the log file is being executed by the job to the last line, but the file copying and sarmanalyzer commands simply do not work.
    Any pointers are greatly appreciated.
    Thanks,
    Sid

    Hi Nick,
    Thanks for help!
    My bat file runs without any errors from external tasks in EDQ.
    The account has full control on all the shared folders i am using.
    My script:
        set ss_temp_dir=D:\Datanomic\dnDirector\config\landingarea\EDQ_Notification
    echo s1 > log.txt
        set srm_analyzer_path=\\<appsrvr4>\d$\sba81\siebsrvr\BIN
    echo s2 >>log.txt
    COPY /Y \\<appsrvr1>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
    COPY /Y \\<appsrvr2>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
    COPY /Y \\<appsrvr3>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
    :: The above copy is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
    echo s3 >>log.txt
    ::  log s1-s2-s3 created in commandarea.
    setLocal DisableDelayedExpansion
    pushd  \\<sharedloc>\siebfile\FDR\
    setLocal EnableDelayedExpansion
    echo s4 >>log.txt
    for /f "tokens=* delims= " %%G in ('dir/b/od T*.fdr') do (set newest=%%G)
    echo s5 >>log.txt
    copy %newest% %ss_temp_dir%
    echo s6 >>log.txt
    :: log s4-s5-s6 created in   \\<sharedloc>\siebfile\FDR\
      pushd %ss_temp_dir%
    echo s7 >>log.txt
      for %%F in (%ss_temp_dir%\*.fdr) do (
         ::set outfile=%ss_temp_dir%\%%~nF.csv &&
      %srm_analyzer_path%\sarmanalyzer.exe -o %ss_temp_dir%\Snapshot_Working_CSV.csv -x -f %%F
    :: The above saqrm_analyzer is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
    echo s8 >>log.txt
    MOVE /Y %ss_temp_dir%\*.fdr %ss_temp_dir%\BU\
    echo s9 >>log.txt
    :: The above move is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
    ::Log s7-s8-s9 created in %ss_temp_dir%
    Thanks,
    Sid

  • My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

    my audio does not work on my pavilion dv4

    This worked for me.
    Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist.  Move the .plist to your desktop.
    Log out/in
    If it works, delete the .plist on your desktop.
    If  the same, return the .plist to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

    iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

    I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • XPS 8700, audio is not working

    Hi,
    I got this new desktop last month. From the beginning the audio is not working. When I tried installing the drivers from the dell site, I get this error. My system details are:
    XPS 8700 (Mid 2013)
    <private data>
    When I install this:
    Audio_CREATIVE_W7_W8_W81_A00_Setup-241T2_ZPE.exe
    I get the error setup is unable to install.
    When I install this:
    XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.EXE 
    I get this error =
    Vendor Software Return Code: 3
    [04/01/15 10:16:01] logo.png
    [04/01/15 10:16:01] Name of Exit Code: DEP_SOFT_ERROR
    [04/01/15 10:16:01] Exit Code set to: 3 (0x3)
    [04/01/15 10:16:01] Result: FAILURE
    [04/01/15 10:16:09] Open file: C:\ProgramData\Dell\UpdatePackage\Log\XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.txt
    Please tell me what to do

    The audio loaded correctly. Plug speakers or head phones (not wireless head phones) into the rear green audio jack. Then the red arrow should disappear under Sound- Playback Speakers.
    The KM632 USB adapter should be unplugged, then plugged back into a USB port on the rear of the XPS 8700.
    Do that and see if these change.

  • System Audio Is Not Working: Error AppleLegacyAudio/AppleTexas2Audio.cpp

    Hello,
    I noticed last night that my audio has stopped working, both input and output. After checking the system log, this is the message that is repeated numerous times:
    *Nov 19 13:04:03 sylvesters-powerbook-g4-17 kernel[0]: ^PSound assertion "0 != err" failed in "AppleLegacyAudio/AppleTexas2Audio/AppleTexas2Audio.cpp" at line 2703 goto Exit
    Is the reason the audio is not working simply a matter of a missing file or do I need to completely reinstall the OS? I have a back up that I can quickly copy files from.
    Thank you very much.

    Hello,
    Try deleting this file: com.apple.audio.DeviceSettings.plist
    /Users/YourName/Library/Preferences. Drag that .plist file from the Preferences folder to the trash, empty the trash and reboot. See if your audio works as it should. If not... might want to do an Archive and Install:
    Reinstalling Mac OS X
    Under some circumstances, you may need to reinstall Mac OS X. You can reinstall Mac OS X while keeping your files and user settings intact.
    Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
    Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
    Click Options. *If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings.*" If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
    Click Continue.
    Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
    If you purchased a standalone version of Mac OS X, these installation instructions are in a booklet included with Mac OS X.
    If you need to reinstall the version of Mac OS X that was on your computer when you purchased it, or if you need to restore all the software on your computer, including Apple, bundled third-party applications, and printer drivers, instructions are in the manual that came with your computer.
    For more information, visit the Mac OS X Install and Upgrade Support website at:
    Mac OS Tiger Install
    Carolyn

  • U305-S5077: Audio is not working

    Hello,
         My toshiba laptop's audio is not working. I tried downloading the driver online, rebooting the computer to its factory default setting, and looking for other solution online, but I can't seem to get the sound working. When I go to the device manager, the sound icon is not there even after downloading the driver and restarting the computer. I don't know what else to do. Please help. Thanks.
    Christinne 

    Satellite U305-S5077 
    One of these drivers, Christinne? May as well try both.
       Realtek Audio Driver for Windows Vista (Version: 6.0.1.5473)
       Realtek Audio Driver for Windows Vista (Version: 6.0.1.5420 Logo) 
    When I go to the device manager, the sound icon is not there
    On the other hand, when the device is missing from Device Manager, it normally indicates a hardware malfunction.
    -Jerry

  • What should i do my audio is not working?

    my audio is not working
    i had something wrong with my computer so i had to rewrite my hardrive witch whiped everthing clean luckly i saved my songs
    i downloaded the new version of iTunes off of apple.com
    when i downloaded it a little thing pop up said that there were problems with my audio
    now i cant play any songs, its not like there is no sound
    i mean i push play and the song dosent even start
    someone please help me
    Message was edited by: missprincess2101995

    We will need a little more information from you to be able to help.
    - Which computer do you have?
    - Which Mac OS are you using?
    - What audio hardware are you using? If you're using some external audio hardware have you tried selecting Built-in?
    - Have you tried restarting?
    - When you do restart do you hear the boot chime?

  • I am possessing apple iphone4. In my phone while watching video, audio is not working. Volume level is fuul

    I Am holding iphone 4.7.1.2. though my volume is full, while on video audio is not working.

    Hi klgksharma,
    Welcome to the Apple Support Communities!
    I understand that you are not hearing sound from the speaker of your iPhone while watching video. In this situation, I would recommend working through the steps in the attached article to troubleshoot. 
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Best regards,
    Joe

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

    BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

Maybe you are looking for