Audio device not detected in control panels
+Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
I also tried installing Daniel_K's driver pack to no avail.
Any ideas?
Thanks,
Glorfindel
/Hi Glorfindel,
Did?you?reinstall the applications from the installation cd?
Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.
Similar Messages
-
I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.
Is the device turned on? The blue light should be solid blue (not flashing).
If it never goes solid blue, try a different cable, try using the adapter power (not bus power). Run System Profiler and check that your firewire bus does not say "No information found". Make sure you have the latest drivers installed. Is the audio device shown in the System Preferences -> Sound drivers? Is the audio device one of the few compatible ones with PT M-Powered?
Never hot plug the firewire cable, especially if any device is bus powered.
See where that lot gets you... -
Audio device not detected by Creative Audio Control Panel
I cannot get creative audio control panel to work, I keep getting an error message saying the audio device supported by this application is not detected. I have had this problem using xp, vista and now windows 7. It seems to work after a reformat and clean install but will eventuslly stop working again for some reason.
I have read a few posts with people having the same problem but cannot find a solution.
It is getting quite annoying having to reformat all the time just to temporarily?fix this so if anyone can help it would be very much appreciated.
Thanks.Naamloos.jpg
I also looked at the details of the driver and it shows a whole buch of driver, even two unsigned. Are all these neccesary? Maybe I have to many old drivers conflicting?
Creative.jpg
Also the volume mixer seems empty, although it shows the playback device when pointing over the square, I can't select it.
Attached Images
creative2.jpg
(19.4 KB, 2 views) -
PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
DiaboliusBTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden" -
No audio device...in control panel
I go into the control panel and then sounds,game controllers, etc.... in WinXP. It shows no audio device.
All the audio options in the bios are set to auto or enable. Its not detecting the integrated audio and I don't know how to fix it.
Please help..check under the board for one to many stand offs or one were it should not be
-
Product:
HP Pavilion dv6707us Entertainment Notebook PC
SN: [Personal Information Removed]
Product Number: KC323UA#ABA
OS: Windows Vista (32-bit)
The OS does not detect the audio device. Under the device manager, there is no entry for "Sound, Video, and game controllers"
The "Windows Audio Service" is automatically started.
Is there a way to check if the audio device has stopped working or if this problem is a software issue? Should we do a fresh Vista Installation?Hello deburgess7,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
MS Lync Audio Device Not Detected
I Have recently upgraded my lync to 2013 from 2010 and my audio device is not detecting in Lync 2013 now. Am using 3.5 mm jack Iball head phone which is working in other systems with same configuration. Can any one help...???
Hi,
In addition, if it can be detected in Windows system, you could try setting it to the default device.
Restart Lync and test.
And some related cases for your reference.
https://social.technet.microsoft.com/Forums/en-US/4a4be6e3-a68d-476c-b879-7ea6d1548792/lync-2013-we-didnt-find-an-audio-device-which-you-need-for-calling
https://social.technet.microsoft.com/Forums/en-US/30ec9d70-2cca-40be-b9dc-be7763e3530a/lync-2013-client-no-audio-device-detected?forum=lyncvoice
Best regards,
Eric -
"AMD HDMI Output -AMD High Definition Audio Device not plugged in
i have an HP Pavilion dv6-6110us laptop. i have had this laptop for less than 1 month and the sound is not working at all. I checked to make sure nothing was muted, i uninstalled the soundcard and reinstalled it on Device Manager, and still, I cannot manage to get the sound back on. the audio settings says "AMD HDMI Output -AMD High Definition Audio Device not plugged in) ..but i have no clue how to "plug it in". Help!!!?
Hey! You essentially have two sound cards, including the HDMI. First, make sure you're using the ATI graphics card, and not the Intel, when you want to use the HDMI.
Next, go to Windows Control Panel\Sound
On the playback tab (which shows by default), WHEN YOUR HDMI IS PLUGGED IN AND WORKING, you should see two playback devices: Your internal sound card/speakers, and the AMD HDMI. All you need to do is switch between the playback device you want the sound to be channelled to. You can switch this at any time. I do this when watching in the other room via my projector, or in my comp. room. Just select the HDMI sound device and choose the button on bottom-middle "Set Default". This will change the "default device" tag to below the HDMI playback device. To reset, either unplug the HDMI, or switch it here. This is always the first place you should look when you have sound issues.
Because I switch quite often, I have a shortcut link on my desktop to this sound menu, for quick switching.
If this doesn't work, make sure you have drivers for your ATI video card installed. Check you exact model and make sure your bios is up to date. They have made for switchable graphics now, which is much preferable to the previous auto-detect switch. The drivers are updated, as well. The latest HP drivers for the ATI were released in November. You can install these, then install the latest AMD/ATI Mobility Video Driver package over the top to make sure you have the latest video drivers. Either of these packages includes the HDMI audio driver, which you may not have installed. -
AMD High Definition Audio Device Not Plugged In - h8-1070t
Seeing this message in control panel/display drivers for HDMI on my video card.
In short I will get sound occasionally out of my HDMI card which is plugged into my stereo. Randomly the sound wil cut out and I get this message: AMD High Definition Audio Device Not Plugged In
Occasionally when I restart my computer it works again, but only for a short time. I have reinstalled the drivers from AMD with no luck.
Stats below:
Model: h8-1070t
Product: LP028AV#ABA
Video Card: AMD Radeon 6850
Much appreciated for any help!I have the same problem and have just begun looking into it. I have my Radeon 7570 hooked up to a Panasonic TV with the HDMI connection. After a reboot of the computer and turning on the TV it works, but if I change the input on the TV to something else and then come back to the HDMI input the computer is connected to, the sound is lost. The computer then reports that the AMD device is not plugged in and it switches the default to the standard speakers.
Elsewhere I've seen it reported that updated AMD drivers have corrected the problem for some, but when I used AMD's automated driver detector and downloader it complained that it couldn't identify the 7570. So HP's version of the 7570 doesn't seem to match AMD's. So it's up to HP to provide an updated video driver to correct this problem.
Let's hope they do. -
Dear all,
I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
I am using Windows 8.1
I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
Format List.
Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
Kind regards,
OsvaldoHi,
Windows uses the information set under
'Phone and Modem' in the Control Panel to determine the default area code.
You can change the country/region to
Mozambique
and set your area code here:
Regards,
Steve Fan
TechNet Community Support -
how do I uninstall CS2 on a PC when it does not appear in control panel add or remove programs, the hard drive was replaced and the program corrupted.
reinstall over your current installation and then uninstall, Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
or uninstall manually, Manually remove Adobe Creative Suite 2.x | Windows -
I just want to remove firefox but cannot do so as the icon does not appear in control panel
It should be listed as "Mozilla Firefox"
*See --> https://support.mozilla.com/en-US/kb/uninstalling%20Firefox
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
7510 does not appear in control panel
HP Photosmart 7510, WIN 7, 64bit. No other changes. HP Pavilion dv4.
Installed with CD. Printer connected to netowrk just fine, everything indicates it installed correctly. Won't print from PC. Printer does not appear in control panel.
Tried reinstall, with same issue.Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
What does it say?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
X-fi fatal1ty device not detected when running speaker selection wizard
Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk -
Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solvedFolling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts
Maybe you are looking for
-
I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?
-
Open Items Are Locked in a Payment Proposal
Dear experts, Please isn't there an easier way to found out in which proposal run an open item is locked without displaying the database table REGUS via the transaction code SE16? I mean, isn't there a kind of transaction code users can run by themse
-
What would you do? Fix or upgrade?
The logic board on my August 2008 MBP just gave up the ghost. Apple says they'll fix it (and everything else that might be broken) for $310 and provide a 90 day warranty. Here is what I'm trying to decide. Over the three years of applecare I've had t
-
XML to single element: Attn: Henrique
Hi Henrique, Could you pls tell me in detail about how to achieve One whole xml into one string element. I am new to all this and have not used xslt or java mapping before. Regards, Ashish
-
Getting two different counts in one go?
Hi I have a massive table with following fields ID DATE RESPONSE some other fields There are several records for one id in different dates. what I want, id ,count(response) when date between today-365 and today, ,count(response) when date between tod