Audio doesn't split

I'm trying to insert a clip. It moves the video portion over but NOT the audio. I want the audio to STAY with the video that's moving to the right to make way for the new clip.

Yes. Splits are done within Mainstage, not within your keyboard. You can set the range of the keyboard that you want a particular sound to play. (Bass part from Middle C down, for instance. Piano sound from Middle Db up.) All the MIDI info from your keyboard is coming in on the same channel but the sounds are assigned to different parts of the board. Same with layers and multiple zones.
Make sense?
Message was edited by: Mitch Towne1

Similar Messages

Video audio doesn't work

video audio doesn't work
video runs but no sound
please help

ITunes uses Quick Time to convert. Quick Time cannot convert MPEg (Muxed) Files. Read this:
Quick Time: Using MPEG 1 and MPEG 2 Files:
http://docs.info.apple.com/article.html?artnum=61608
Again:
It is not possible to export the audio portion of a muxed MPEG-1 or MPEG-2 audio/video stream using QuickTime.

USB Bose Audio Doesn't Work & DVD/CD Ejects during startup 10.6.1

Anyone having this problem on the Mac Pro 8 Core
USB Bose Audio Doesn't Work, have to pull USB plug out and put it back in for audio to be recognised & DVD/CD Ejects during startup >>> 10.6.1

What is the ouput of cat /proc/asound/cards, aplay -l?
For an example:
[firekage@arch_desktop ~]$ cat /proc/asound/cards
0 [XFi ]: SB-XFi - Creative X-Fi
Creative X-Fi 20K1 SB073x
1 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6080000 irq 17
2 [U0x46d0x825 ]: USB-Audio - USB Device 0x46d:0x825
USB Device 0x46d:0x825 at usb-0000:00:14.0-7, high speed
[firekage@arch_desktop ~]$
[firekage@arch_desktop ~] aplay -l
card 0: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
[firekage@arch_desktop ~]$
I think that you have multiple sound devices and their boot order changes after each reboot.
Last edited by firekage (2014-06-20 13:13:05)

HT201177 switching to multiple displays via i-mac and apple tv works great in video but the audio doesn't switch over.

When I switch to multiple displays the video transfers perfectly through my Apple TV but the audio doesn't come through unless I turn the volume all the way up to it's maximum level, and at that, it's hardly discernible.

Hi Pommedaddy!
Try using the following article to help you troubleshoot this Apple TV audio issue:
Apple TV (2nd and 3rd generation): Troubleshooting audio issues
http://support.apple.com/kb/TS5150
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Ipod audio doesn't keep up with video! help!

ok. ive got a 60 gig. ipod with a imtoo file converter. almost every time i convert, the file's audio doesn't keep up with the video. for example, at the end of the movie, the audio keeps playing! help plz.

"I think the best one to use is called videora."
Maybe you should first visit "Videora's" Website and read the Bug list...Things that are not correct":
Known Bugs
Audio/Video sync
Problem - Output files can be out-of-sync. While no set pattern has been established, it seems to be more frequent with input files of 23.976 fps, non-DVD rips, and WMV/MPG filetypes.
Workaround solutions - Try the custom option '-async 1'. If the disconnect gradually increases over time, setting 29.97 fps sometimes gets rid of the problem regardless of the input fps. You can also use AviSynth to assume the FPS and have the audio sync to that. If it's a sudden disconnect, check your VOB Cell settings in DVD Decrypter settings per this thread. Otherwise, test with an AviSynth script per the DaProphecy's method in the FAQ. For non-DVD files, PSPVideo 9 may be a good short-term solution until the converter stabilizes some more or try something like AviDemux.
Audio track not getting picked up
Problem - The IFO stream rip is fine, but the converted file has no sound. The debug info showed to audio track getting picked up. The most obvious case with this is the Madagascar DVD.
Workaround solution ideas - Test with an AviSynth script per the DaProphecy's method in the FAQ (untested). Use a different DVD ripper.

After effects CC export to premiere pro CC: audio doesn't match

Hello!
I am making an animation serie for Belgian TV. They need me to export only my audio from premiere (I make the animations in after effects).
They need OMF format.
When I export from after effects CC > Premiere pro project (only to export my audio to OMF from here) the audio doesn't match.
Adobe media encoder doesn' support OMF unfortunately.
Example; if I stretch the audio time in after effects, premiere doesn't.
I am really stressing out and any help would be very welcome
Thank you!
Ellen

Hello Jim
Thanks for the reply!
When I import my after effects composition into premiere, it is perfectly visible and the audio is correct.
But now it is suddenly impossible to select > export > OMF
Do you know why this is?
Thanks!

Audio doesn't work when exporting to Quicktime

Hi there.
I've imported a FLV file with audio into a Flash file. When
previewed as a swf, the audio works, but when exported to
"Quicktime Video" (not the "Quicktime" setting) the audio doesn't
play.
I've double checked my Quicktime settings (ie the audio isn't
Disabled, and i've tried Animation, Video, None and MPEG-4
compression) but the audio still doesn't play.
The weird thing is, if i have a Quicktime movie playing in
Quicktime and then open my Quicktime Video file from Flash then the
audio in the first Quicktime cuts out.
Also in Quicktime the info on the Quicktime Video from flash
says it has a Audio Track with the settings I exported it out as,
but I'm still not getting any audio.
Does anyone know what's going on?
Thanks in advance

Anyone?
or is my question not making sense?
Thanks in advance

Audio doesn't work after encoding

I have finished editing a video and gone to export it as a WMV and the audio doesn't work; there is just a buzzing noise.
The audio works fine on the timeline, but i just cannot export it.
Any ideas what's gone wrong?

Hi ATR, thanks for getting back to me. Here is all the info you required:
It's Premiere Elements 10 on a Windows 7 PC.
The source media is a mix of WMV, MP3 audio and JPGs.
The project settings are:
Editing Mode: DSLR
Timebase: 25.00 frames/second
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
The export settings are:
Windows Media:
Presets: HD 720p 25
File type: Windows media
Frame size: 1280 x 720
Fps: 25
Audio settings: 440 kbps, 96kHz, 2 channel 24 bit VBR (I have tried it with a number of different variations on this and still had no luck)
I’ve tried opening with Windows media player as well as VLC. Neither are having it.

I installed an HP update for audio driver, now audio doesn't work,

downloadde and installed an HP update for audio driver, don't think it installed successfully however now my audio doesn't work. is it possible to do a system restore on win 8.1?
HP Pavilion 500-214
This question was solved.
View Solution.

Actionhero, welcome to the forum.
Yes, it is possible to do a System Restore. Here is a guide that will help you with it.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Audio doesn't match video because repeated half way through

Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video:   ABCDEF
Audio:   ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
Babs

Hello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name                            : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format                                   : MPEG-4
Format profile                           : QuickTime
Codec ID                                 : qt
File size                                : 1.46 GiB
Duration                                 : 10mn 32s
Overall bit rate                         : 19.8 Mbps
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-15 03:24:05
NCDT                                     : NCTG
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 2 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 10mn 32s
Bit rate                                 : 18.3 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.368
Stream size                              : 1.35 GiB (92%)
Language                                 : English
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-02 18:22:46
Transfer characteristics                 : BT.470 System M
Matrix coefficients                      : BT.601
Audio
ID                                       : 2
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, Sign                    : Signed
Codec ID                                 : sowt
Duration                                 : 10mn 32s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 116 MiB (8%)
Language                                 : English
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-02 18:22:46

.mov audio doesn't import

I've been importing a .mov file that has audio but the audio doesn't import. What should I do?

According to Flash's Help…
"If you attempt to import a file format that is not supported on your system, a warning message appears that the operation cannot be completed. In some cases, Flash might import the video but not the audio in a file. For example, audio is not supported in MPG and MPEG files imported with QuickTime 7 on Mac OS. In such cases, a warning indicates that the audio portion of the file cannot be imported. You can import the video without sound."
So this may be an issue with the format of your particular video clip. If you have Quicktime Pro, you can try exporting the movie again using a different format for your sound options such as "AAC" or something.

When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

Audio on the timeline, especially stream, tends to play very reliably. Is this project under any NDA or can you provide a FLA to examine? Let me know if you want to private message it and I'll shoot you a message.
What version of Flash Player are you targeting and is this AS2 or AS3?

Audio doesn't match the video ... why

Last night I tried to sort some of the clutter from my desk by downloading some recorded video on VHS tapes. The images worked fine with no dropped frames at all, however, the audio doesn't match the video.
Example 1: the footage is of skydiving recorded from Channel 4 (UK) while the audio that is captured with is commentry from several years ago when we lived back in Australia (Channel 7).
Example 2: the audio is very very slow.
The footage was recorded on a VCR which has no audio/video out facility and is converted via the ADVC 110 from a VCR which does have the audio/video out plugs. The DV is then saved to an external drive 500GB.
Can anyone suggest a way around this unique effect .... please.
Blue skies
Dean

G'day Martin,
Here are the answers to the questions you asked.
As far as I can tell everything is PAL. The VCR used to record the footage and the VCR used to download to the converter. The later has NTSC capability but not turned on (I checked).
The Canopus is set to PAL and the FCE easy set up is set to DV PAL converter.
The Video and Audio are recorded at the same time.
I should add that I tried it again this morning and it worked for a short while but then reverted to previous reported faults. I have tried about 8 different VHS tapes and they all do either of the two described faults.
Thanks for your suggestions.

Realtek high definition audio doesn't work.

On windows 8.1 pro BootCamp. Yellow caution sign appears at realtek high definition audio, doesn't recognise the speakers. I've installed again the driver s but nothing it doesn't work. This means i can't play any game such as gta 4. Please help. I've got an imac 21,5 2012

maybe I didn't make it clear enough
currently apple bootcamp does not have windows8.1 drivers as windows8.1 is not officially supported
so one can try the windows8 bootcamp drivers http://support.apple.com/kb/dl1638
or try drivers from realtek http://www.realtek.com.tw/search/default.aspx?keyword=drivers

Samsung Note 3 importing MP4 video audio doesn't sync

I recorded a video clip in my Samsung Note 3 smartphone at 1920 x 1080. The video is MP4. When I import it into Premiere the audio doesn't sync. I've tried to convert the video into a wmv and mov using a conversion tool and the problem gets worse. The MP4 clip plays perfectly on my Windows 7 64bit PC. I'm using Adobe Premiere CC 7. Any ideas?

MP4 is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
If your original video uses a Variable FRAME Rate it will not edit in Premiere Pro until you convert to a Constant Frame Rate

Audio doesn't split

Similar Messages

Maybe you are looking for