Audio driver

i am having COMPAQ V5000 model and i have install windows 7 in it.
but audio is not working.
please help to sort out this driver problem.
thank you

Hi:
Did you try the Vista driver from your PC's support and driver page?
Sometimes that works.
Paul

Similar Messages

  • Beats Audio Driver for 4-1130us ultrabook

    Hello,
    Recentel installed Win 7 on my notebook.
    I seem to have lost the Beats Audio driver and cannot locate it under the drivers...
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=ca&dlc=en&sw_lang=&product=5318...
    Can someone please help me?
    Also the light above my Mute button (fn F11) does not work either.
    thanks in advance
    John
    This question was solved.
    View Solution.

    Hi, John:
    See if this audio driver works.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107829-1&cc=us&dlc=en&lc=en...
    You may need to install the quick launch software for the other issue.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en...

  • G510 audio driver installati​on problem on Windows 8.1

    I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
    Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
    Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
    The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
    How can I say which audio chipset is installed and install the correct driver?
    Solved!
    Go to Solution.

    hi mikolajek,
    Welcome to Lenovo Community Forums!
    Under Device manager
      You should look for your Audio
    Normally it stays under Sound and gaming controller,
       And if no driver is installed in shows as High Definition Audio
    Right click on it and select Properties
         Go to the Details TAB
    change the Value to Hardware ID then check the details
    ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01 
    Get the 4 digit after VEN and DEV
    Ven is the Vendor and Devi is the Device
    Go to PCI database and do a search for the VEN
    Then search for the DEV and youll know that device
    Regards
    Solid Cruver
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G560 ... AUDIO DRIVER FOR WINDOWS XP ..

    Iam using Lenovo G560 laptop for 8 months.. but just now , i formatted my system and installed WIndows XP and Windows 7... . but iam not able to install conexant audio driver on windows XP ...when i tried to install ...it says "problem with audio media" .. so anyone plzzz help me out of it sir....

    try this driver
    ps: new bios is available for your device.
    http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_3839.html

  • Dolby Audio driver cannot start after upgrading to Windows 8.1

    Hello.
    Windows 8 was the worst thing that happened to Windows, but since I bought this G505s laptop with Win8 pre-installed, i had no other choice to go to. Few days after the purchase, Windows 8.1 arrived and I updated 8 to 8.1 hoping to see some improvements. But to my sadness, 8.1 has ruined my expectations, and Lenovo didn't even care to address the user issues in 8.1
    Here are my Issues : 
    OneKey Recovery : Updated to 8.xx.xx.xxxx
    The OneKey Recovery app tells that 'Current system cannot create a backup'
    I can't have a secure laptop without it creating the Recovery !!
    Lenovo, please address this issue and fix the OneKey Recovery Problem !!
    Dolby audio app : Doesn't open, and if once it starts, cannot configure the Equalizer !
    --- Dr Saketh ---

    hi sotim01,
    Thanks for posting!
    1. Uninstall all components,
            Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
    2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
    3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
    4. Download this Driver for installation
            Conexant Audio Driver  
    Install it and continue
    5. Open Drive C: now and you should have the Drivers folder back.
          Open that, Open Connexant Open Dolby Gui,  then you should have Dolbyaa for Advanced audio.
    Restart your PC and there you go!
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • G480 - Dolby Audio driver cannot start after upgrading to Windows 8.1

    I upgraded today to 8.1 and now when I start my computer I get a message box telling me <re-install Dolby advanced audio driver>. I found the Dolby program in my control panel, programs and features, and there is no un-installer or, seemingly a way to re-install the driver. I want fix this problem / don't want this box popping up at every boot, what do I do? Thank You.
    Tim

    hi sotim01,
    Thanks for posting!
    1. Uninstall all components,
            Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
    2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
    3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
    4. Download this Driver for installation
            Conexant Audio Driver  
    Install it and continue
    5. Open Drive C: now and you should have the Drivers folder back.
          Open that, Open Connexant Open Dolby Gui,  then you should have Dolbyaa for Advanced audio.
    Restart your PC and there you go!
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How can I install audio driver from BootCamp into Windows 7?

    After an uneventful installation of Window 7 (64) onto iMac  cor 2duo OS X 10.6.7.
    NO SOUND.
    I have tried to replace the Audio Driver HD through Device Manager: it is not working
      a) if I disable the Windows Driver and try to install the Cirrus driver from the BootCamp disc, I am informed that "device already has the optimal driver"
      b) if I unistall the WIndows driver, Sound Video Game Controller disappears from Device Manager-so there is no place through which I can install a new driver.
    c) If I start from the BootCamp/Driver folder and select Cirrus and Install, I am again getting the answer that the "device already has the optimal driver"
    I am frustrated! Please, can you advise how to proceed?

    You do NOT want to disable unless you are not going to use a device.
    You want to rollback or uninstall and get Cirrus driver.
    Try Boot Camp (Setup) repair-reinstall - to enable the device.

  • How can I just use a generic Realtek audio driver without "Beats Audio" interfering!?

    Beats audio is terrible! I just want to have a flat EQ with no stupid sound effects enabled. The only way I've been able to do this so far, is to uninstall the audio driver, and just use the generic windows one instead. But what I would like to do is use a generic Realtek audio driver, and completely remove Beats Audio from my computer.
    After uninstalling the audio driver that comes with my laptop, I tried getting a standard Realtek driver from their website. But when I install that, Beats Audio reappears! This is so frustrating! How can I uninstall Beats Audio? I want it gone forever! I can see from searching these forums that this is a common problem. But none of the solutions have shown how to just use a standard Realtek driver without this Beats Audio rubbish.
    Can anyone tell me how this is possible? I'll stick to the generic windows driver if I have to. But it would be nice if I could just use the Realtek drivers as they were meant to be.
    Thanks

    Thanks for the reply. But you've misunderstood the question. I know how to uninstall the sound driver and just use a generic Windows one instead. But what I'm actually looking to do, is install the Realtek audio driver without Beats Audio. Thanks.

  • Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

    Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
    This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
    But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
    By the way I got an Satellite M70 - 168 laptop.

    Hi
    Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
    Found this useful knowledge base article:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
    This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
    But dont worry buddy. The Google search engine is the key!
    Try to search for this KB835221 patch and Im sure you will find the right one!
    The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
    PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
    Good luck!
    Message was edited by: Jayjay

  • HP Pavillion dv6500 with windows xp pro AND NO audio Driver!

    i have a hp pavilion dv6500 laptop entertainment pc here with me.  It came with windows vista but i downgraded to windowx xp pro.  it runs alot smoother!  Everything works great except one problem?  The audiio drivers that the hp websites has does not work?  I cannot find the right audio drivers?  I have tried even letting windows update search for the drivers with no luck?  Why are the drivers on the website not working?  How can i get this to work?  if i upgrade it to windows 7 can i intergarde the vista drivers to work with the windows 7 program?  i really need help!  Thanks!

    The General XP Downgrade Guide for HP notebooks is what you need to read. This well written guide has helped (at least!!) thousands of forum members downgrade their notebook successfully. There is a section that applies to your notebook.
    The issue you are having probably is related to not installing the MSUAA driver before the device specific audio driver.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • "unable to start Dolby audio driver on windows 7"

    when i try to open Dolby Advanced audio it says _-"Unable to start the Dolby audio driver. Please restart the computer or reinstall the driver if the problem persists"-_ thats's what it says to me.
    now i do have the driver but it doesn't appear in the device manager neather does realtek so.....WTCrap?
    And when I try to install Dolby home theater it says-_" There is another PCEE product installed already. Please uninstall
    it befor installing this product. Setup will now exit"_-......
    any help will be very apreceated
    windows 7 64bit
    HP Pavilion G6-2321ee
    Intel core I5
    6gb ram
    1TB HDD
    AMD Radeon HD graphics 
    And i have Razer surround sound driver installed and I tried to uninstall it and try dolby and it didn't work
    This question was solved.
    View Solution.

    Hi mido112k,
    I understand that you are having a problem installing the Dolby Home theater on your HP Pavilion G6-2321ee Notebook PC. I will try my best to help you with this.
    I suggest that you restore the original Performing an HP System Recovery (Windows 7) and then install the update driver.
    I hope this helps, please let me know.
    Thank you,
    I worked on behalf of HP.

  • Beats audio driver error -This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE

    i just did a windows 8.1 reinstall, and now suddenly my audio doesnt work? i torubleshoot the issue and it suggests uninstalling and re installing, but i dont know how to do that cant find the driver software someone help?

    What kind of reinmstall did you perform?  If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed.  Your list will be different than the following one, but this is only an example. 

  • U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

    U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
    Picture link (hosted on photobucket.com)
    I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
    I tried to uninstall this and let windows update install it again => not worked, same problem.
    I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
    And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

    What kind of reinmstall did you perform?  If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed.  Your list will be different than the following one, but this is only an example. 

  • Audio driver fails to install on xp 64 bit

    hello i have an »HP Compaq dc5850 Small Form Factor PC (ENERGY STAR) 
    Serial Number:  [Personal Information Removed] 
    Product Number:   AM500AW
    i installed windows xp 64 bit along with service pack to and i downloaded the xp/2000 adi hd audio drivers from hp's site but when ever i try to install the audio driver i get a message from xp saying the audio driver has failed and no audio codec is installed how do i fix this as i dont think hp has 64 bit xp drivers for download can i use the vista 64 bit drivers please help me out thanks
    This question was solved.
    View Solution.

    The Microsoft UAA driver for Windows XP 64-bit must be installed before you install the audio codec.
    Here is a location for the audio codec.
    Post your results here in your thread.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

    Hi!
    I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

    Hi:
    See if this driver works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en​...

  • Audio driver not working in hp 2000 - 2116tu laptop

    Audio driver not working in hp 2000 - 2116tu laptop
    Driver installed : sp57716.exe
    From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
    OS : Windows 7 Pro x64
    Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
    Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.

    Hi architsomani,
    Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for

  • Using wild card with Captivate 5 ( fill in the blank)

    I am training software package that requires many fill in the blanks besides the login screeen.  If I were to recording the actions using Captivate 5 record, I think,  I can only use a demonstration recording as oppsed to having my students interact

  • SQL script with a prompt functionality.

    Hello experts, I tried searching this on the net but was unsucessful... Bascially I need to update an sql script with a prompt functionality..Basically I would like a user prompt that would enter 'Yes or No' to compile invalid objects using utlrp. If

  • Author Only annotations in a help project?

    Hi All, While working in RH6 I just realised I'd thought of an enhancement to Robohelp, and want to check if it might have been added to RH8 (currently waiting for bureaucratic wheels to turn on my RH8 request, and have run out of PCs to install RH8

  • Where do I download the bootcamp drivers for my Macbook 2009 mid 2.13ghz from?

    Also, how do I set it up so Mac OSX boots up first? I went to bootcampassistant and it won't download the driver files I need for my Mac to get Windows to work on it. I am now downloading something from apples website called BootCamp 5.1.5640.zip but

  • What is Apple's mission and vision statement? Where can I find it?

    I've thoroughly searched the Apple website for their mission and vision statement. And I have still not found it anywhere. Please help, as I am writing a paper about the organization as a whole.