Audio gone after EyeTV Update

I've just updated to EyeTV 2.3.2 (Everything was fine on 2.3.1) and now find there is no audio through the digital output on the iMac.
If I unplug the connector from the digital out on the back of the computer then plug it back in while eyeTV is running a live tv window, the tv glitches for a second or so and then the audio returns.
If I then Quit eyeTV and start it back up the audio is gone again, and I need to repeat the unplug/plug in operation.
Without eyeTV running the audio is fine (Quicktime/iTunes etc).
I've contacted Elgato support about this and I'm awaiting a reply.
Anyone else having trouble, or does anyone know of a way to roll the eyeTV version back to 2.3.1 to confirm if it's the update or not?

I had similar problems with EyeTV 2.3.2. Elgato didn't help me ( they just asked me the same things I had already told them as if I WAS AN IDIOT and not them - which is typical German arrogant behavior by the way). So better stay away for a while from EyeTV updates. Going back to version 2.3.1 isn't easy because there are some extensions in the system folder which need to be erased. Only re-installing the old app didn't help.

Similar Messages

  • [Solved] Audio dead after system update

    I was having a difficult time with network issues so I did a system update last night, and while it cured my network woes something broke my sound which was working fine before. I use MPD and Ario to play music and VLC to play video and both have no sound. I tried everything in the wiki to no avail, and searched the BBS for ideas (I always use startx).
    I did several lsmod, aplay -l, aplay -L, etc commands and everything looks just the same as before the update. I checked audio levels in alsamixer, and even tried to install pulseaudio on top of several reboots and adding myself to audio. The only thing else that might help is I hear a pop from my speakers every so often. I don't know what else to provide that could help. It's hard for me to figure out because everything looks normal, and the cards are even being initialized as far as I can tell.
    Last edited by zerologik (2013-03-05 04:56:29)

    lsmod |grep "snd"
    snd_hda_codec_hdmi 27561 1
    snd_hda_codec_realtek 61729 1
    snd_hda_intel 27668 11
    snd_hda_codec 100743 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6429 1 snd_hda_codec
    snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
    snd_timer 18935 1 snd_pcm
    snd 60157 29 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5443 1 snd
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888-VD Analog [ALC888-VD Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888-VD Digital [ALC888-VD Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default:CARD=SB
    HDA ATI SB, ALC888-VD Analog
    Default Audio Device
    sysdefault:CARD=SB
    HDA ATI SB, ALC888-VD Analog
    Default Audio Device
    front:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    Front speakers
    surround40:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=SB,DEV=0
    HDA ATI SB, ALC888-VD Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
    Everything looks normal to me, unless I'm missing some crucial detail somewhere.
    *EDIT: I went ahead and tried a few more things and reread the PulseAudio entry in the wiki and used pavucontrol as a last ditched effort and found that after the update it seems the soundcard became muted somehow even though I never had pulse installed before on this machine.
    I should have tried that first, sorry for anyone who wasted their time on this thread and a good lesson for fellow newbies is to always try control packages first before moving onto other means/making a thread. Marking this as solved.
    Last edited by zerologik (2013-03-05 04:56:06)

  • Apps gone after apps update

    All my purchased and downloaded apps are gone after updating some of them from the App Store, how do I retrieve them back?

    Hi there x.vivchong,
    You may find the information in the article below helpful.
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    -Griff W. 

  • Hebrew Menus Gone After Firmware Update in my 6233

    why the hebrew support menus gone after updating to a newer version of the firmware???
    what sould i do to restore it back?
    is it possible?

    The only thing you can do is take it to a nokia care centre. They are the only ones that will be able to fix it.

  • Spore gone after firmware update

    About a month ago I got a message suggesting software update for my X6. After the update I no longer have Spore on my device! How can I get it back?

    in future follow this guide about updating
    http://www.google.ie/url?sa=t&source=web&ct=res&cd=1&ved=0CBMQFjAA&url=http%3A%2F%2Feurope.nokia.com...
    but im afraid to say this game is gone for good so look on the web
    you can find them on the web or something similar
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • LENOVO 3000 G230 DVD DRIVE Gone After BIOS Update

    Hi,
    After I updated my bios with latest one from the website http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_2191.html, my DVD drive is gone, not just from windows but i cannot find it in the BIOS.
    Pls any one give me BIOS update, prior to this?  any help in making my DVD drive show up again. 
    thank you,
    ocavid
    PS:  Prior to updating the bios i can still work with the DVD drive but after I applied the update and the system rebooted, my DVD drive is gone.

    I have successed to find again my CD/DVD drive both in BIOS and Windows 7 by doing the following:
    (1). Press F2 at "Lenovo" start up display to enter BIOS
    (2). Go to "Main" (the place showing also Harddisk Drive) and enter F9 for Set Default.
    (3). Go to "Boot" and enter  F9 for Set Default
    (4). Exit with save.
    Hope the information is usefull for all.

  • Ethernet Atheros AR8132 / L is gone after .34-update

    The ethernet controller: 07:00.0 Ethernet controller: Atheros Communications Atheros AR8132 / L1c Gigabit Ethernet Adapter (rev c0)
    was just not showing up anywhere after a update to .34 Has been working just fine until this update. Ifconfig was just displaying the lo interface after the update, which kind of baffled me - I didn't expect an ethernet network card to not work in a newer kernel.
    Thanks to the wireless driver from AUR for my wifi card, I'm online again, but I would still like the ethernet card to work. Also, this should probably be reported somewhere upstream, if it isn't already? I feel a bit selfish when I fin a solution for mysel without sharing it the proper way to save others the trouble.
    Last edited by naguz (2010-06-23 12:05:06)

    Well, a "modprobe atl1c" makes my card (which is not th same as yours - which is even a wireless card, using a diferent driver, so probably no relevance) show up in networkmanager and ifconig output. I am currently moving, so I have no ethernet cable availible to see if it actually works. But strange that the driver is not detected and loaded automaticly.

  • All info gone after software update, how can i get it back?

    New G3, notified me I needed to sync w/itunes to get the new update. After syncing, and various problems and errors, it said i needed to restore my iphone... everything would be wiped clean +but i could get it back+ after the update was complete. Update is complete, where is the option to put all of my stuff back on my phone? My contacts, my appointments, my alarms, my life... aargh!

    Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
    Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
    I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

  • The option to play audio book has gone after IOS6 update audio books are on the iphone

    Hi since updating to IOS6 I seem to have lost the ability to play Audiobook, if I go to the Ipod app the option isn't there and hen I connect to my car it says the folder is empty. Is there something I need to do to be able to play audio books. The audible app finds all the books so I know they are there, but doesn't work in the car where I like listening to books on long journeys.

    anilsudhakaran Thanks!  This did the trick.  I guess this was added with the update since this view used to be visible for me without the added step.  Greatly appreciated 

  • HP Slate 21 audio issue after KitKat update and reset

    I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
    I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?

    Hey @PauloTxR ,
    Welcome to the HP forums.
    I understand you're experiencing issues with sound quality on your Slate 21 PC.
    Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
    This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
    If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • All of my songs are GONE after i updated my Nano to 1.2!!!!

    well last night i connected my nano to my computer, then started up itunes nd i get a msg to update it to version 7.0. So i installed it then it asks me to upgrade to version 1.2 for the ipod. so i'm like WHy not.
    after the firmware for the ipod has been updated, i disconnected the cable, i went through my ipod and i noticed it asking me which language i wanted, so i scrolled down to english. then i went through my songs n next thing i know, everything is GONE.
    i connected my nano back to the comp, nothing shows up on Itunes either. But when i went on My Computer to check my ipod, it does show how much space my songs have taken up!
    so it may seem like the songs are still on my ipod but its just not showing anywhere... i tried to look through the folder MUSIC on my ipod, but nothing is there, however when i looked in the folder Artwork, theres a few big random files :
    http://i3.photobucket.com/albums/y89/rubberrbandman/ipod.jpg
    so does anyone know what i can do to restore my songs? or are there any ways to save my songs?
    or should i just.. reformat it? thank you
      Windows XP Pro  

    I am having the same problem. I connected my ipod to my computer last night and it prompted me to upgrade to Itunes 7.0. I did that and the same thing happened to me...all of my songs are gone from my Ipod. It still shows disk space beign used when my Ipod is connected to my computer but no songs or files. Can anybody explain this or help me to find out whre all of my songs went. Thanks

  • Photos and videos gone after ios5 update

    After updating to ios 5 and doing a restore from my backup all my videos and photos that I took using the ipad are gone from my ipad. I did a full backup before starting the new update so I expected they would be there. Maybe I'm missing something.

    I found this and did it myself and it worked perfectly!
    http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/

  • My draft emails are gone after Maverick update... is there a way to bring them back?

    After the Maverick update all the draft emails are gone in mail... is there a way to have them back?

    If your main account is gmail follow the instructions below:
    Quit Mail.app.
    Log into Gmail in your favorite web browser.
    Click on the gear menu and select Settings.
    Click on the Labels tab.
    Under System Labels, next to Drafts, click on show if unread and uncheck the Show in IMAP box. Now disable Store draft messages on the server.
    Launch Mail.app.
    Select Mail → Preferences…
    Click on the Accounts button in the toolbar.
    Click once on the account name and then click the Mailbox Behaviors tab.
    Uncheck the Store draft messages on the server box.
    Close the window and opt to save your changes when prompted.
    Follow the steps above and your draft messages should "magically" reappear in your draft folder on Mail. Here is the full link:
    http://apple.stackexchange.com/questions/108742/mail-keeps-setting-save-drafts-o n-the-server-checked

  • Flash buttons gone after active-update

    Hi,
    Just performed the active-contect update for flash and
    dreamweaver.
    After the flash update, nothing had changed. Still needed to
    click to activate a button, made in flash (8).
    Then I installed the dreamweaver update 8.0.2., also with
    updates for active content.
    After opening the pages in Dreamweaver 8 I got the promised
    question what I wanted to do with the <object> items.
    I choose to update them.
    Now everything worked fine when I testet the page on my own
    server (PC) but the oploaded files where NOT.
    All flashbuttons where gone, they just didn't appear!
    It took a while untill I found out what the problem was.
    Since everything worked fine on my own server, It had to be
    something with the uploaded files.
    All pages where changed, uploading the swf files didn't bring
    the solution, so it had to be something else.
    My site has many folders, it's a big site.
    When I checked the folders on my own servers I found a new
    folder called: Scripts
    Uploading this folder solved the problem.
    Nowhere in the manual, help files or explanations is
    mentioned there will be a new folder called Scripts.
    When you have a small site with a few folders, you will
    easily spot it, but when you have more then 50 folders.....
    Regards,
    Eric

    "Eric72" <[email protected]> wrote in
    message
    news:ej1v80$9f$[email protected]..
    > Hi,
    > Just performed the active-contect update for flash and
    dreamweaver.
    > After the flash update, nothing had changed. Still
    needed to click to
    > activate
    > a button, made in flash (8).
    > Then I installed the dreamweaver update 8.0.2., also
    with updates for
    > active
    > content.
    > After opening the pages in Dreamweaver 8 I got the
    promised question what
    > I
    > wanted to do with the <object> items.
    > I choose to update them.
    > Now everything worked fine when I testet the page on my
    own server (PC)
    > but
    > the oploaded files where NOT.
    > All flashbuttons where gone, they just didn't appear!
    >
    > It took a while untill I found out what the problem was.
    > Since everything worked fine on my own server, It had to
    be something with
    > the
    > uploaded files.
    > All pages where changed, uploading the swf files didn't
    bring the
    > solution, so
    > it had to be something else.
    >
    > My site has many folders, it's a big site.
    > When I checked the folders on my own servers I found a
    new folder called:
    > Scripts
    > Uploading this folder solved the problem.
    >
    > Nowhere in the manual, help files or explanations is
    mentioned there will
    > be a
    > new folder called Scripts.
    > When you have a small site with a few folders, you will
    easily spot it,
    > but
    > when you have more then 50 folders.....
    Good point, it should say so in the Help files - you might
    want to let Adobe
    know of that oversight.
    Personally, I was pretty happy to have that problem solved so
    quickly and
    automatically by Dreamweaver - seemed like a big convenience
    to me..
    Patty Ayers | www.WebDevBiz.com
    Free Articles on the Business of Web Development
    Web Design Contract, Estimate Request Form, Estimate
    Worksheet

  • Very low audio quality after amber update

    After installing amber update audio quality and volume has dropped significantly! Volume through speakers is alot lower, and when plugged into headphones audio lacks quality and depth. There is barely any bass and volume is very low, sounds like listening to a clock radio very disappointing, as audio quality on my 920 was very very good the best of any phone so far before amber update!

    i haven't noticed that with my 920. have you tried performing a soft reset and also check that you are up to date with all the latest Nokia system app updates from the Store?

Maybe you are looking for

  • KeyBoard Lights

    Can I send my mac air in and get the keys that are backlited installed ?

  • Book Order Upload Size

    So I just sent a 24 page book to Apple, and on the little dialogue box with the progress bar it said it was sending a total of 24.3 mb worth of data towards Apple. With the exception of the front title page, the other pages are in FULL colour, meanin

  • Checking Date Format.

    Currently I came across a requirement to check the date format of a date stores in VARCHAR2 column. I don't think this is feasible or not... because if some date is stored like - '01/01/2012' how will I determine it is 'DD/MM/YYYY' or 'MM/DD/YYYY'. C

  • Where can I find sky version 6.5 and below?

    Hi everyone, I want to install skype on an old laptop with win xp. Now before people start saying get sp3, i can not. The graphics drivers do not support sp3 and as such I only have sp2. From what I have heared I need an older version of skype. I was

  • Exchange 2010 Health check

    Dear all, if the exchanger 2010 run DAG (two servers). How to mak the health check very day and health check report will be sent by email . thank you john