Audio gone after saving

I made a movie with a audio file. I saved it as a flv and the audio saved fine. I couldn't figure out how to post that to my facebook so I saved it as a MPEG. The MPEG file has no audio at all. What;s the deal with that? Not the first time it's happened either. Am I missing something?

I agree with Hunt. What type of camcorder did your video come from and how did you get it into your computer?
It sounds like you're using video with an incompatible audio codec.

Similar Messages

  • Lost audio files after saving.

    I lost my audio files after saving in Logic X and now my project file has the extension .logicx on it and my audio files are nowhere to be seen. I made some changes to the project, moved the file to another folder, then they asked if I wanted to replace the other file with the new and I said yes not thinking that it would matter. Is there any way that my audio files are still out there somewhere? And no I don't have time machine hooked up.
    Thanks.

    if you replaced that file.. then you have lost it's contents as they have all been replaced with the one you copied over... and as you have no backups you cannot, as they say.. un-scramble the egg...
    Finally start making backups as soon as possible...
    As the old saying goes...
    "There are three things in life you can always count on.. Death.. Taxes...and you will need a backup of your computer data at some point"
    Nigel

  • Audio gone after EyeTV Update

    I've just updated to EyeTV 2.3.2 (Everything was fine on 2.3.1) and now find there is no audio through the digital output on the iMac.
    If I unplug the connector from the digital out on the back of the computer then plug it back in while eyeTV is running a live tv window, the tv glitches for a second or so and then the audio returns.
    If I then Quit eyeTV and start it back up the audio is gone again, and I need to repeat the unplug/plug in operation.
    Without eyeTV running the audio is fine (Quicktime/iTunes etc).
    I've contacted Elgato support about this and I'm awaiting a reply.
    Anyone else having trouble, or does anyone know of a way to roll the eyeTV version back to 2.3.1 to confirm if it's the update or not?

    I had similar problems with EyeTV 2.3.2. Elgato didn't help me ( they just asked me the same things I had already told them as if I WAS AN IDIOT and not them - which is typical German arrogant behavior by the way). So better stay away for a while from EyeTV updates. Going back to version 2.3.1 isn't easy because there are some extensions in the system folder which need to be erased. Only re-installing the old app didn't help.

  • Audio gone after Export to Final Cut Pro XML

    Hi,
    Whenever I export to XML, I can't keep working in Logic unless I Relaunch/Initialize CoreAudio. I get no audio playback otherwise. Logic works, just no meter deflection, sound, etc.
    Is this a known bug or just my rig? Anyone else have this problem or is willing to try it?
    Thanks, Randall
    MDD DP 1.25, 2gig, LP721, 2xUad-1, RME Digiface, LC+XT's.   Mac OS X (10.4.7)  

    It's a bit old, but I made this a while back:
    http://www.keynoteuser.com/tips/finalcut.html

  • I keep losing my audio files after saving them. Have no idea why. Anyone have an answer?

    Hi, I'm recording a podcast with music and male voice narration files. I keep losing the male narration voice files every time I save. I've tried command S and File Save and have no idea why this is occurring. Can someone offer any help? Thanks.

    Need more information:
    What model iPod and iOS
    Are you using iCloud notes
    After you make a note  does the not not appear when you open the Notes app the the next time? What if yo do not close the notes app (or go to another app) and then go back to that note?
    Is anybody deleting the note on another device or iCloud?

  • Parts of Audio Gone After Export

    When I export my movie from FCE as a Quicktime Movie to be burned with iDVD, parts of the audio arent there. The whole movie plays back fine in FCE but as soon as its exported, theres missing audio. All of the audio is rendered so I'm not to sure what's going on. Is there any way to fix this?
    Thanks

    Did you Mixdown the audio? (First, Edit>Select all then Sequence>Render Only>Mixdown)
    Do you have ALL your render options selected before you render?
    Any MP3 files in the sequence?

  • Imports gone after saving metadata.

    My imports disappear if I want to save my metadata in the NWDS. Due to this errors appear and I cannot run my application.
    Does anybody have a solution???

    Hi Ouden,
    What error you are getting?
    If your project is DC project then add the necessary DCs in your project
    •  In the Web Dynpro Explorer of the
       Web Dynpro perspective expand the
       Web Dynpro project.
    •   Expand the nodes DC Meta Data =>
        DC Definition and right click on
        Used DCs.
    •   Choose Add used DC…
    •   A Add Dependency wizard will appear.
    •   Choose the necessary DC required for your project
    •   Check Dependency Type Build Time, Deploy Time and Run Time
    •   Click on Finish.
    Regards,
    Mithu

  • After saving project upon reopening one of my video files and it's corresponding audio is red

    After saving project upon reopening one of my video files and it's corresponding audio is red (both are offline).  Attempts at relink result in a warning that the audio will be deleted (which is does when tested).
    This project is based on a multicam sequence (2 video files) and using Pro CC (latest Cloud build).
    Anyone come across this and/or have a solution?  Thanks in advance.

    Appreciate your assistance and guidance Mark.  Yes, I am a newbie on this forum - and fairly new to premiere pro though have used elements since version 4.  I'll answer your leads below.
    First off, some bookkeeping & jargon matters:
    "you reported the file extension (.mts) but not the codec of the video therein. AVCHD?"
    .mts files are Sony AVCHD files.  filmed with Sony NXCAM NXU5 camera.
    "re: the version you're on, rather than simply stating "the latest," it helps to report the exact version numbers as shown in the About box. That not only avoids any confusion today but also aids customers who come upon a thread months from now."
    Version is 7.2.0
    "you refer to "rendering" to a new format. I know that "render" is the right term in some NLEcosystems, but with Premiere we distinguish between rendering and exporting/encoding. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip."
    My bad - I exported/encoded the sequence to a new output clip.
    Now back to our regularly scheduled troubleshooting. Three questions:
    did you start this project in CC7.1 and then update to 7.2/7.2.1 along the way?
    I started this in 7.2.0
    are either of the clips in the multicam sequence spanned?
    I don't know what "spanned" refers to
    I gather that you created the multicam sequence via the new workflow in the Project panel: select the clips, right-click>CreateMulticamSourceSequence. Am I right?
    Correct
    If so, please create a new sequence, set the timeline to insert sequences as individual clips (via the left-most button under the timecode control), add the multicam sequence to the new sequence, and post a screenshot of the timeline.
    Now all of a sudden I am able to open my project file(s) as before with no problems.... very curious. 
    I did this and then could not find my multicam sequence.... so no screen shot... BUT what happened?
    thank you for your guidance with this.

  • Delete audio after saving presentation "with" audio

    After saving a presention with the option to save audio "with" the presentation, I can no longer delete audio from any slide. Is there a way to delete audio in this scenario?

    Hello and welcome to the forum,
    Seth answered about the choice when importing the PPT. You can add a click box to each slide, it will pause the slide at the end of the click box timeline, so be sure to adapt that timeline.
    Do you want to add audio in Captivate? You have to know that every PPT-slide will be converted to sort of a video slide in Captivate, which makes synchronizing with audio not that easy.
    Adobe Presenter would be easier to use (and be sure, I am a Captivate freak myself, but will rarely use PPT, but directly Captivate)
    Lilybiri

  • I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

    Can anyone help with this - do I have to uninstall Reader and then reinstall?

    I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

  • Lines are appearing after saving a psd in cc 2014

    Hello,
    I've been having some issues when saving psd's in CC 2014. After saving an image lines tend to appear, and in one case actually added to a mask I was creating. I have image examples below of what has been happening. One last note is that it seems that this issue happens sporadically. If it was on every psd I saved I would have a bit more of a solid thought as to what was wrong, but it just kinda does it whenever it feels like it. I have since restarted my computer, but the issue still is there.
    This image shows when not only did the lines appear, but also they added to my mask I was creating.
    This image is to show that the lines appear randomly sometimes now when viewing images and actually get saved into the document.
    Until I can figure out what is happening I'm switching back to CC for awhile. Any help would be great.

    Ok, I had a bit of time to further test this today -- and it looks like the "Cache Tile Size" settings is the culprit for me. The default 128k setup is creating the lines artefact while working on larger files (something around 1500x1500 pix files and up). Setting a tile size of 132k or higher, I was able to re-open files and the artefacts are gone. Putting back the 128k, opening an offending file and I have the bug. I'm able to reproduce it.
    So the Cache Tile Size fixes it. One note : if I happen to export a file (ex: jpeg), the lines artefacts are "baked" into the artwork. However saving a PSD file with the artefact, and open it after changing the tile size makes the artefacts go away.
    What's weird is that I get this bug now only if the "Use Graphics Processor" is unchecked. But the first time around, it was checked as it looks like it's the default upon Photoshop installed. Now I can switch it back, put the 128K tile size, and I'm ok. Again, it's not an extensive test since I did 20 minutes of fiddling with various files. I'll update later on if the bug's back since I'll use CC 2014 from now on.
    Also note that the first time around, I was able to get the artefacts on much smaller files, but these we're smart objects pasted from Illustrator. This looks fixed now. It might be the way PS handles caching for vector objects.
    So play with these settings, don't forget to close PS on each Performance settings change. Let us know if it fixes it.

  • PDF file won't open after saving it from the web.  get error message file is damaged.

    My PDF files won't open after saving them to Docs from the web.  I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion? 

    I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
    But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
    CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

  • How should i export already h.264 compressed video/audio files after i edit them?

    I am recording gameplay footage off computer with a program that compresses the video and audio. After I edit the footage how should i export it? I don't want to lose quality by double compressing it.

    Michael Holmes1 wrote:
    I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
    No.
    You need to explore Compound Clips. This workflow may or may not be of help.
    Select an Event with clips in it and press Option+G to make a (blank) compound clip.
    Select the Event Browser, create a new Event and call it 'Effects'.
    Drag the Compound Clip into this Event.
    Right-click the clip and select 'Open in Timeline'.
    Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
    Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
    Now open a project and select and copy one of the clips with effects etc.
    Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
    This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
    It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
    Andy.

  • I have created a narration for a video, and it plays it while in the editer tools, but after saving it to my desktop, that version has no narration. can you help? Please.,

    I have created a narration for a video, and it plays it while in the editor tools, but after saving it to my desktop, that version has no narration , can you help...Please.

    timester
    What version of Premiere Elements and on what computer operating system is it running?
    How did you save your Timeline content which included the narration clip produced with the project's Narration Tool?
    Publish+Share/Computer/ and then what? And, what preset? And, for that preset, did you use the default settings of the preset
    or did you customize the preset under its Advanced Button/Video Tab and Audio Tab?
    What other audio was in the project - any on Audio 1 or Soundtrack? Did you get involved with Smart Mix at all?
    Let us start here. We will be watching for your follow up.
    Thank you.
    ATR

  • Mac Crashing after saving in Illustrator

    I have a user here reporting their Mac crashes dead after saving in Illustrator.  As it is happening, the audio skips then all dies.  Any leads as to how this program could be causing this catastrophic of a problem?

    donut,
    If we are talking CS3 and Yosemite, and if it happens when saving to/placing from new location with Yosemite, you may get round it by using the Adobe Dialog instead of the OS Dialog in the Save As window (similarly for the Place window).

Maybe you are looking for