Audio in OS 3.0

Since upgrading mg iPhone 3G to OS 3.0, I have had the following bug: Audio on Music and movies won't play after being stopped. If I reset the device or power down and then back on again, the first video or song I play works just fine, even an entire playlist works just fine. But if I pause it the audio no longer plays on any video or song. The video component plays just fine, and the time indicator keeps moving on songs, but the audio does not play through any available output-built in speaker, headphones, or bluetooth. All other apps play their sounds just fine, however. Any Ideas? I've tried resyncing my phone. I haven't yet tried restoring it to factory settings and deleting all my data.

The problem resolved after starting iPod app, then Force Quitting it. No problems since. Reboot the iPhone seemed to have no effect.
Message was edited by: singularity989

Similar Messages

Unable to capture audio

Hi,
Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
Where is the problem?
Thanks,
Simon

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Unable to capture 2 audio tracks

FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

Hi boxpuppy,
iTunes is not able to import some Windows Media Player files. See this article for further information -
Importing Windows Media Audio files with iTunes for Windows
http://support.apple.com/kb/HT1844
Thanks for using Apple Support Communities.
Best,
Brett L

Audio malfunctioning on hp ultrabook?

Hello! So i just recently got a laptop in late june almost early july.
Its a HP ENVY touchsmart 4 Ultrabook
Its not even 2 months old and the speakers on here suck. They kida slurr and like lag. Its stutters really bad. I can't listen to 1 song without it doing that. And sometimes it freezes but only very quickly. And also my down arrow button came off like within 2 weeks.
This is my first Laptop so im not sure if i can return this and get a new one because its audio is malfunctioning and stuff? I have a one year warranty on this.

Hello Gurjot24,
If you want to return it rather than getting it fixed, please contact HP support over the phone to see what options are available.
If you are in the US or Canada the number is 1-800-474-6836, if you reside in a different location click on this link. Click on your country, then click “technical support after you buy”, and the number will be provided.
I hope everything works out.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

How do I use my web cam to record audio and video? I can get the video to work but no sound.

I want to record both audio and video at the same time. The video works fine but not the audio. I do use Skype without any problems using both.

PwmBoat,
This made me smile, because things like this do make me smile... I never make videos on YouCam, but I did this time, so I could test this one out.
You did not say what webcam software you are using...
======================================================================
Video and audio recording works on YouCam V3.5.1.4606
Make sure you have turned on a working microphone in Settings:
YouCam > Right-Side Settings >
Right-Side, Lower-Right, Select a working Microphone from the Drop down list
AND
CHECK "Capture with audio"
OK
You can also buy (for $38 US) YouCam 5.0 from the Cyberlink.com website and it has audio/video and all sorts of other goodies, too. (They have 3.x as well, but why buy what HP already gives you?)
==========================================================================
I hope this helps!
We work hard to help!
Whenever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
Did this Post solve your problem? Mark it “Accept as Solution”!
Note: You can find the “Accept as Solution” box on threads started by you.
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

Why does GarageBand audio work for guest user but not my account?

Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband .

Does the mini DVI port cary audio if using a Mini-DVI to HDMI Adapter?

Hello everyone,
I've heard it is possible for a DVI port to transmit audio data to a HDMI connection if a DVI to HDMI cable is used, which will allow the sending of both audio and video to your TV. see: http://en.wikipedia.org/wiki/DigitalVisualInterface
I'm assuming this is not possible using apples mini DVI port, but just wanted to check to make sure. My main goal is to get surround sound out of my powerbook. To do this by simply adding a Mini-DVI to HDMI Adapter would be GREAT!

Hi Jonathan,
I'm assuming this is not possible using apples mini DVI port
Yup, no audio, unfortunately. The audio will have to transmitted separately via the analog audio output.
Yang

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

How to connect my Macbook Pro to HDTV Polaroid with Audio

I connect my cable mini dvi in my macbook pro to my screen Polaroid 40 "I have video but I have not audio, and I went to the System Preferences menu to change the audio output and can not hear anything on the screen
thanks

The yellow RCA jack is called "NTSC Analog Composite Video", or "Video" for short. You need an adapter to "Video".
Exactly which MacBook Pro (or which output Display Port) do you have?

Need help to open audios attached in a PDF file

Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
Thanks

Audio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

How can I display & split the audio & video from the same digitized clip?

I digitized a scene into iMovie that I edited on a professional system which I don't have access to anymore. The whole scene is 1 clip. Now I see a few tweaks that I want to make, so I was hoping to do them in iMovie.
I want to "pull up" the audio in one section - meaning I want to take cut about 20 frames of audio from the end of a shot, and then move all the other audio up to fill the hole. To compensate for the missing 20 frames, I'll cut video off the head of the next shot. Some call this prelapping. Some call it an L-cut. Some call it asymmetrical trimming. Either way, I can't figure out how to do it in iMovie.
My clip appears in the timeline as one track - a single track that contains the video and 2 audio tracks. How can I display the audio that's tied to the video on its own track? Then I think I could split audio & video wherever I wanted and trim things up - but I can't figure out how to do it.
Am I asking too much of this software?
BTW, I never see the option to "Split audio clip at playhead". I'm not displaying clip volume or waveforms. Choosing to display waveforms doesn't show me anything. Maybe iMovie thinks I'd only want to see waveforms of audio that isn't tied to my video-and-audio clips?
Thanks in advance for any help...

Jordon,
"Am I asking too much of this software?"
No, you're not.
You first want to select your clip(s) and choose Advanced>Extract Audio.
This will copy the audio from the video clip and place it on one of the two separate audio tracks while lowering the audio level to zero in the original video track.
You can now edit and move the audio independently of the video.
With the audio clip selected, you'll find you now have access to Edit>Split Selected Audio Clip at Playhead.
Matt

How do I use one audio jack as input and one as output?

On my MacBook Pro, if I get a USB-headphone connector (to add another audio port), will I be able to set one audio port as input and the other as output? To use the port coming out of the USB jack as a headphone jack, and plug a mic/output device into the computer's port?
I'm thinking about buying a "Sabrent USB External Stereo Sound Adapter". I have a preamp that is NOT an interface, and I want to be able to monitor what I'm doing so I can multitrack. But my MacBook only having one audio 1/8 inch jack makes it so I have to choose either input OR output...I'm hoping if I add an extra port via USB I'll be able to have one of each.
Thank you!

Roger Wilmut1 wrote:
nategm wrote:
On my MacBook Pro, if I get a USB-headphone connector (to add another audio port), will I be able to set one audio port as input and the other as output?
Yes, either way round. In System Preferences>Sound you can set the input and output ports separately.
Roger, the System setting have -Nothing- to do with the question being asked. Do you use Logic Pro audio software? If you did you would know Logic has it's own audio settings that run independently from the System audio. There's also the fact that Maverick has problems with "some" older USB 2.0 audio hardware. Basically, this is not a slam-dunk, that's why I suggested asking someone if they've used this combination before. Although... the USB audio device is cheap ($10) it might be worth it to try. Still.............**
** I question the wisdom of using cheap audio hardware on a computer that cost $1000+, software that costs $200 and then using the internal audio chip ($2) and an external monitoring device that costs $10. Defeats the whole purpose of using professional audio software.

How can i use airplay with apple tv on a set of audio speakers?

hello there,
i've got a problem with my stereo apple tv combination.
my TV does support HDMI so i can use my apple tv on my HDTV. only my audio is being played on my internal speakers of my HDTV. I do have a set of speakers. but it doesn't support optical audio out. so i was wondering if its possible to use an Airport Express en plug my speakers in there. then wirelessly send the audio from my apple tv to my Airport/speakers. do any of you think that thats possible?? cause i really can't find another way to transfer my audio to my speakers...
Thanks alot!!

Unfortunately you can't send audio from the Apple TV to an airport express, but you can send audio from your mac/pc to the airport express via iTunes/Airplay, you could also send audio from an iPod/iPhone to the express. The express supports both optical and 3.5 mm in a unified port.

Dual monitor use audio output for movie and other for MBP

is it possible im watching a movie on one and wated to answer factime call or watch youtube on my mbp and just screamed out my tv speakers.....i want fual monitoring but separate audio any help?

Other alternatives include
I know on mackbooks I've seen firewire used as an input for a Weiss Dac if you're into two channel audio. Do any reiceivers take firewire as an input for hometheater? Has anyone tested Firewire outputs on their W series? I'm told that firewire is sometimes preferable to USB, I'm not sure why this would be, can USB support passthrough of DTS encoded signals?
In the case that firewire works and you Do not have a firewire source, maybe something like this would be of value It converts firewire to digital coaxial s/pdif and allows passthrough of DTS and AC3.
http://www.m-audio.com/images/global/manuals/FireWire-Audiophile_Manual.pdf
As I'm into audio the critical thing here (and what you're paying for when you purchase blue-ray, is maintaining the digital information from the disk in an unconverted form. You want a direct bit pass through, and you want as little jitter introduced to the signal as possible. You most certainly don't want the sound card getting in the way, Digtital to Analog converting and then reverse packaging it up and putting it out over the soundcard digital out. My problem is I'm not familiar enough with computer audio to know how exactly the sounds is transmitted from your blue ray drive to the digital interface you've chosen.
Anyone know why USB digital out would not be a prefered method?
Moderator note; comment removed which contravened forum rules

Audio in OS 3.0

Similar Messages

Maybe you are looking for