Audio in source but not when dragged onto timeline

Hi,
I have just been editing some video taken with a dslr, and the audio is there in the source, but not when dragged to the timline?
I see there is an option to select drag video or audio only, but I cannot select the audio.....
Any help with tis please...?
Kind Regards
Rossco

http://forums.adobe.com/thread/1374590?tstart=0

Similar Messages

  • After Effects Crash when audio file is dragged to layers panel, but not when dragged to comp window

    Ok, so this is an odd one, and as it has a work around its not a huge issue, but it would be good to get to the bottom of it.
    If I load an audio file of any type (wav, aiff, mp3 etc) into the project window everything is fine, however if I drag it down to the composition layers panel I get a crash.
    However, if I drag the file to the composition widow (to the right) this does not cause a crash, and now that this has loaded the audio file in question I can drag it freely wherever I like without a crash. However if I import a different audio file and drag it downward to the composition layers panel it crashes again.
    I am running cs5.5 upodated to the latest 10.5.1.2 and running Mountain Lion.
    Crash report

    Ok, so I figured out what is causing the crash... why I do not know.
    I had a background texture that was very large (5184x3456) that was hidden. If this layer was unhidden then it did not cause the crash, no other hidden layers caused the crash.
    I re-sized the layer in photoshop to comp size, then re-inserted this image. It now works without a problem.
    So I have solved my own problem here, would still like to know why it happened if anyone can shed some light on this?

  • Embedded swf plays in preview mode but not when loaded onto site

    http://delormdesigns.com/Oxen2008/2008Fair.html
    I have created a swf by first creating an flv from an avi then publishing the swf in flash. I inserted into an html page and can see the video on preview. However, when I load the page and all of the assets onto the site, I get nothing.
    I tried to view the swf directly, and it does not play. This may be an issue with how I converted the avi file or how I published the swf. I am starting in this forum just in case.
    Thanks!

    Yes, I did exactly what you recommended. I swapped the swf with another, loaded the page, and tested it. It worked perfectly. So, even though the original swf worked fine during the preview test, there must be something about the file that does not work when loaded on the site.
    I found an article about creating and inserting a flv file from an avi...that will get me 1/2 way there so I will be trying that. Perhaps there was a step in the avi to flv process that needs fixing...and then the swf creation would work.
    I appreciate your responses!
    ~ Caprice

  • FONT ISSUES: Fonts work perfectly in Indesign 5.5 but not when dragged into CC.

    When I open a file using Indesign 5.5, it is absolutely perfect. When I drag it to Indesign CC, it tells me that there are fonts missing. Then I cannot update those fonts because they dont appear. My font management software (Suitcase Fusion) is completely up to date. It has become a big problem for us.
    Thanks!

    Problem solved. Thanks Ken Rice, tht obviously helped.
    Peter, yes, we had checked that yesterday, thanks.
    Willi, That was plan b according to Adobe support. I'm pretty sure that packaging the file while in 5.5, then opening in CC would have worked.
    Plan A (from Adobe support) worked which was copying the necessary fonts from the system (or from packaging the file in 5.5), into The fonts foler located in "Applications-->Adobe InDesign CC-->Fonts".
    Thanks all for your help!

  • Sequence explodes when dragged onto timeline (Premiere CC)

    I am using Premiere Pro CC
    When I am dragging a just-created sequence (by nesting clips) back to the timeline or any other timeline, all the clips appear separately, and not as a single object (the nested sequence).
    Is that new behaviour in Premiere CC or is there a setting to control that behaviour?

    Hi
    Great function. But there's one little trouble i'm getting here...
    Film was shot in double-system. I synced all shots with audio using Select all > make multiclip > based upon timecode > renamed my multiclips (shot-scene-take).
    But when i drop any of those multiclip in a timeline, wether the "Insert and overwrite sequences as nests or individual clips" button is toggled or not, i get the original source name for the video (A001_C01_xxxxxx), not the renamed "shot-scene-take" name.
    I noticed that for regular sequences, when toggled, the function will allow to keep sequence's name... Any way to keep this for a multiclip?
    thanks

  • Premiere Pro Timeline with 3 video channels and 4 audio channels, audio channels change to 8 channels when clip dragged onto timeline.

    Premiere Pro Timeline with 3 video channels and 4 audio channels, when clip dragged onto timeline audio channels change to 8 channels. Audio track mixer changes too. I edit undo to remove dragged clip and it reverts back to 4 channels of audio on timeline as does the audio mixer?  Any ideas as to why the audio channels and mixer changes?

    you can check the clip you are dragging to the timeline, if it has 8 tracks... can check by right clicking it in the project bin, choose modify, audio channels.
    The Video Road – Multichannel Audio in Premiere Pro

  • My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download????

    My ipod has had a previous owner How do I change my ipods email address so that when I try to down load anything it asks for the previous owners password but when I go to my account it says its my email my account but not when I try to download can anyone please help me ????Plus it still has some of the previous owners pictures and videos on it that I want to delete and can't????? Also is there a way to kill the apps that u have used throughout the day the battery doesn't last long at all ??????

    - How did you dlete stuff from the iPod? If you have a 1G or 2G iPod and deleted the stuff by going to Settings>Genera.>Reset>Erase aall contents and settings without being connected to a power source, the battery dies before he erase was comleted since it can take hour.
    - In any event try the following:
    - Connect to a chaging sour for three hours.
    - Reset the iPod and then connect to the computer and try to restore va iTunes.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery moe and then try to restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last try DFU made and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I imported photos from an old iPhoto (2001) to photo library and can now see them as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

    I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6

    Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
    Do you have a backup copy of the library that you imported into to?  If you do then bring it in and then use  iPhoto Library Manager to merge the two libraries into a new, 3rd library.
    If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows:  make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
    Fix #1
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    Fix #2
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #3
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library.  But first you should cull out the small photos that would be the thumbnails from the 2001 library.
    Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB.  That should find all of the thumbnail files which you can then drag to the Trash.  You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
    OT

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • HP D110 AIO printer. Prints jam when printing with wireless, but not when hooked to USB cable! HELP!

    I have a HP D110. It jams the paper when I print with wireless, but not when I use USB cable. Any ideas?

    From what you describe you are having issues printing from MS Office. Have you had trouble printing from other resources on your computer (e.g. from the internet or another program)? The first thing I am going to suggest is that we start by uninstalling and reinstalling the printer from the resources available online. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer. 
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3562006&lang=en&cc=us...
    Install that and let me know the result! 
    Have a great day!

  • Wifi works at home but not when away from home

    My Wifi works at home but not when away from home, what is wrong?  I thought with a phone plan I didn't need to have a wifi connection.

    You either need WiFi or Cellular (or both). If you have neither, you can't connect to the internet.
    Most people use WiFi at home and Cellular while away from home, or connect to public WiFi networks where there are some.

  • My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

    My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

    it's a hardware issue
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more here
    iphone stuck in headset mode

  • Sound through hdmi to my tv works but not when watching video online like 4OD

    the sound through hdmi to my tv works with music and videos I have downloaded, but not when watching video online like 4OD and youtube.
    How can I get it to work?

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    I would like to create a playlist of some of my voicememos to hear on my iphone5. I have no problem creating the list and can listen on playlist on computer but not when i sync to my phone. How can I listen to voicememos in a playlist on my iPhone?

    Hi czigrand,
    Thanks for visiting Apple Support Communities.
    Currently, you can gift dollar amounts or individual items (EG. songs) on the iTunes Store. See this article for more information:
    In the iTunes Store, you can gift a dollar amount or specific music, movies, TV shows, or apps from your iPhone, iPod touch, iPad, Mac, or PC. Follow these steps to send a gift from the iTunes Store.
    iTunes: Sending iTunes Gifts
    http://support.apple.com/kb/HT2736
    Best Regards,
    Jeremy

  • Ipod nano plays with headphones but not when plugged in to player

    I have a nano 16gb 4th or 5th generation.  It has worked fine up until about a week ago.  It works if I plug in the headphones, but not when it is plugged into the car stereo or an iHome.  Any thoughts?

    If:
    -you and your husband have the same generation iPod nano
    -they both have the same latest software
    -you tried the car stereo with the same iPod charging cord.
    (with 32 pins connector I just wanted to make sure it is not the headphone plug)
    this means that the problem is indeed with your iPod nano.
    Since you also said that before last week everything worked fine, something must've gone wrong after that.
    This could be software-related or hardware-related. Did you try to connect it to your computer? Does the computer recognise it? Can you still charge it?
    If the computer does recognise the iPod it might be a good idea to 'repair' your iPod via iTunes.
    Or try the Five R's: http://www.apple.com/support/ipod/five_rs/nano5gen/# (more or less the same for 4th and 5th gen)
    If your computer does not recognise it, it probably needs to be repaired. But since it is 4th or 5th generation I guess the warranty is void already, and you'll have to decide how much this is worth to you or if you wouldn't want to buy a new one.

Maybe you are looking for

  • MSI X48c platinum = BSODS

    I switched from an Nvidia 790i Ultra to this mobo but I am getting BSODS like crazy. Reformatted my PC and everything. Only the mobo was replaced. I think the problem is with the mobo since it must detect my XMP settings from my G. Skill Ripjaws 1600

  • [SOLVED] dwm Recompile Difficulty

    I am currently running dwm. I followed the abs intall method from the ArchWiki, but have run into trouble when I attempt to make changes to the config.h and recompile. If I make a single simple change to config.h (ex. change the value of "static cons

  • Converting Business Catalyst Site to Either a php include site, or wordpress cms

    I have a relatively simple for a client that was developed using business catalyst. I orginally was hoping to move the site to our sever, but have since found out that you must use adobe to host your site when using muse as a development enviornment.

  • Why does time machine backup disk images?

    I have Time Machine backing up my folders on my Time Capsule but when I look at the Time Capsule drive in the Finder it shows one Sparse Disk Image Bundle. If I lose a folder on my iMac, how can I easily get the folder off of the Time Capsule? Is the

  • BADI UJR_WRITE_BACK

    Hi Experts, I am a beginner in BPC and would like to know how many times UJR_WRITE_BACK BADI will be called per Input Schedule? I know the write back will be called automatically. The reason for this is i am trying to debug an application build by so